Resume - Electrical power sales engineer, building &construction projects, ATAP division-...

Misco Jobs

Resume #37609

CONTACT INFORMATION:
View contact information...

Personal Data:

Date of Birth: July 22, 1979
Place of Birth: Cairo, Egypt
Nationality: Egyptian
Marital Status: Single
Military Status: Served

Educational Experience:
B.Sc electrical engineering, electrical machine & power dept., Faculty of Engineering –
Hellwan University
Date of graduation: (September, 2003)
Accumulated Grade: Pass
Fourth year Grade: Good
Graduation Project: Electrical and Power distribution design of a 200bd hospital
(Including electrical and power distribution design of a three floors primary school, as a training project) Using: - some of the (NEC 2002 code requirements) - IEEE Std-1990 chapter 2: load characteristics, AutoCAD 2002 2D, ABB software (DOC WIN) for short circuit calculations In addition to manual electrical parameters calculations.
Project Grade: Distinction

Work included in that project:
. Performed design of primary distribution systems, secondary distribution systems, emergency generators and lighting, interior lighting, fire detection system, telephone lines. Low voltage electrical distribution
. Calculations of short circuit currents at the main entrance and branch circuits, and choosing the adequate circuit breakers rating, preparation of drawings and specifications
. Drawings included single-line diagrams, riser diagrams, wiring diagrams, cable & circuit breakers ratings and details as appropriate to convey the design information.
. Electrical schematics diagram in AutoCAD 2002.
. Documents prepared for use by operating and design personnel.

Elementary School: St. Peter School (Language School)
High School: Abdel Aziz Al Soud (Language School)

Self Study:

* Low Voltage selectivity with ABB circuit breakers.. (a 56 Technical application papers)
* (Engineering Dependable Protection for an Electrical Distribution System),
A (BUSSMAN COPPEER) publication, engineering course including:
Part 1: A Simple Approach to Short Circuit Calculations.
Part 2: Selective Coordination of Overcurrent Protective Devices for Low Voltage Systems.
* (Electrical Circuit Breakers, Parts: 1-R, 2, 3………7), an updated e-newsletter version, from the (National Electrical Code) web site: (Mike Holt Enterprises, Inc.)
Prepared by: L. W. Brittian, (Mechanical-Electrical Instructor)
* Very familiar with technical information concerning low voltage protection equipments (protection devices), like (circuit breakers, fuses, relays, contactors, etc)
* also have a good background with the L.V breakers & (ABB low voltage products)

Trainee Experience:

* May 2-3,2006: (Center for Adult & Continuing Education, the American University in Cairo)
Successfully completed (Effective Sales Techniques for Positive Results)
* August 14-16,2006: (Center for Adult & Continuing Education, the American University in Cairo)
Successfully completed (Key Account Management)
* July 21-25, 2002: (ABB Arab factory, 10th of Ramadan), as a trainee electrical power student.

Professional Experience:
Employment current situation: In permanent employment

1- ABB- Egypt (Arab) (1/9/2005- till current date)
Position:
(Projects sales engineer), Low Voltage Sales division
Performing sales work, mainly inside and sometimes outside, estimating the received inquiries for (military, schools, universities,...) projects, preparing and executing the required offers for clients, using ( Low voltage equipment sales offer: ABB, software, for handling sales offers produced by low voltage sales department at ABB Arab, Egypt ), Involving direct customer contact and engineering support, following up the client's delivered offer, frequently, Interpret Engineering Reports for customers and assist with the engineering recommendations, Coordinating and scheduling work with design department, with customers and with consultants, consulting with fellow employees, customers, and potential new customers at a good level of skill, handling signed orders with design and manufacturing departments until the time the client is delivered his manufactured panel boards.
2- ABB Arab Factory (10th Ramadan City)
Position:
(As a trainee electrical power engineer, at the low voltage dept.-1/10/2005- 20/10/2005)
Training period was in: Design department & Production department

3 - World Technique (WOTEC INC.) (1/3/2004- 1/5/2005)
Positions:
(Electrical power site engineer): 4/3/2004 - 1/8/2004

Worked Projects: (Gardenia Plaza, Sharm- 96rooms - phase 1)
Job Description & Responsibilities:
An electrical power distribution site engineer who's responsible:
To execute the works according to the latest approved revision of drawings and/or instructions of authorized authorities. To supervise the construction in terms of proper method, material reservation and optimum output of labor. To study all construction drawings, documents and its updates, in terms of construction methods in coordination with other, contractors, subcontractors prior to construction. To coordinate with the Consultant/ Supervisor for inspection of works stages to gain his approval on the works requested and to make the corrective action needed to gain his acceptance. To suggest to his manager improvements on the system, better ideas for doing the job or part of it through daily/weekly meetings. Being the closest member for the construction team to the labor & being aware of their requirements. Attend a daily meeting with the Construction Manager. Review the work progress and to solve daily problems. To study construction schedule and project budget and review them continuously to assure working within their limits.
Having experience in a consulting engineering environment in the areas of lighting, power distribution, and other types of electrical systems for institutional and commercial buildings.
Systems being used and installed on site: Primary Distribution Systems, Secondary Distribution Systems, Emergency Generators and Lighting, Interior Lighting & power system, Fire Detection System (conventional one), Telephone lines, sound entertainment system, HVAC system.

(Electrical power sales engineer): 15/9/2004 – 1/5/2005
Responsibilities:
Issuing purchase orders, document component specifications/revisions.

Computer Skills:
Perfect working knowledge of the following:
. Low voltage equipment sales offer: ABB, software, for handling sales offers produced by low voltage sales department at ABB Arab, Egypt.
. DOCWIN: ABB software program can do short circuit calculations.
. Design: AutoCAD applications 2D
. O/S: Windows 95/98/XP - MS-DOS
. Microsoft office: Excel - Word - PowerPoint
. Adobe Acrobat (Writer 6.0 Professional)
. Internet Surfing

Language Skills:
- Arabic: Mother Tongue
- English: Fluent: spoken, written & reading
- Spanish: Fair

Capabilities:
1. Ability to work well under pressure and meet deadlines
2. Quick and efficient learning, excellent ability to plan, organize and prioritize my work in a team environment or unsupervised
3. Ability to working aboard

Others:
A Valid Egyptian Passport, an expired US visa (been to the states twice)

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2001 to 2050 of 4363)

Go to Search Parameters...

Brief Description

Conversant in handling of sophisticated chemical engineering process design simulator, (HYSYS 2006;etc).

Willing to accept challenging career in telecom Development Equipment Environment with management and seeking for a position where I can utilize my technical skills and professional experience, to provide the best of mine for the success and growth of the organization and gain satisfaction thereof.

Planning Engineer, Certificate of degree Dr. of Philosophy

An independent and self-motivated professional, with over 10 year’s experience of administrative support.

Crawler Crane Operator

Mechanical Design Engineer: Design of Sanitaiton, Water Supply & Treatment, Fire Fighting, HVAC Systems, etc. Capable of Working both as a design engineer (consultancy companies) + Contractor office Engineer + Management & Proposal Writing

Experience- Over 10 years as Mechanical Engineer engaged in Oil & Gas Petrochemical Industries and Refineries, providing Engineering, Fabrication, Pre-commissioning and Commissioning Services.

Diesel Mechanic

High qualification in construction site management

industrial maintainence/electrician

Graduate Engineer with 1.5 years professional experience. Degree in Civil Engineering. Masters Degree in Water & Environmental Engineering.

Design urban infrastructure, industrial, power, airports Techno economic feasibility studies Project Management Bid evaluations, price analysis, preparation of technical specifications Design review Site Review Business Development, client interaction, presentation

Good knowledge in Maintenance of Oil/Gas and Refinery equipments and procedures.

2 years of engineering and drafting at vocational school, osha 10 lead card, hazmat training certified in asbestos removal

MSc (Mech Eng). Project Mngmt - waste, power, steel. Currently working in China (6 years), have previously worked in Netherlands, England, Canada, Germany. Currently Project Director, responsible for multi-million $ projects. languages fluent Dutch, English, German, good French, basic Chinese

material controler for production using and new project material handling.

Diploma In Mechancial Engineering+NEBOSH Level-3+Post Diploma In Industrial safety Management+Environment, Health and Safety Management Specialist Certification course from NASP of USA/14 years experience in Oil&Gas as HSE Advisor/Engineer/Officer/coordinator/

Total 8 yrs experience in construction field (both mechanical & civil) including LNG storage Tanks, various areas of power plants & played a Key role in coordinating with Occupational Safety, Health & Environmental activities in a uniquely knowledge-based & innovative work environment.

I have been working as a cook for many years now and I possess over 25 years of experiences in the domain. Just to give you a brief idea, I worked as a cook for over ten years in a bush camp with over 40 people to my charge (for treeplanters, hunting and fishing resort and for a Mining Exploration

Qualified Fitter and Turner / metal machinist

Welding, Cutting and Fitting Structural Steel, GMAW,FCAW, SMAW ALL POSITIONS

I have an experience as a supervisor for the erection works of Heat Recovery Steam Generators and High Pressure Drums. As well, I have extensive experience in metal welding. Motivate, serious with open mind that’s how I am, I’m a bite new but I continue learning.

Control & Instrumentation Engineer with 17 years of experience in Projects, Manufacturing, Operations, Technical

I have ability to Design & Draft ARC. STRUCT. & M.E.P works

I can work as a Administrative Clerk, Logistic Co-Ordinator, Computer Operator, Secretary

Excavator operator

Experienced in plant O & M(power plant/LPG Terminal),execution of expansion/greenfield projects,material procurement,tendering/contracts management as well as statutory compliance

Proficient in the use of specialized engineering software includes AutoCAD2006, Tekla Structures (X-Steel), STAADPro2005, ETABS (CSI software) PCA Software (PCAbeam, PCAcolumn & PCAmat), and Profis (Hilti Anchor Bolt design software). Has basic knowledge in frameworks (PDS).

Enthusiastic And Self Determined Engineer Focused In Construction Management

Experienced Civil Engineer Technician. Proven professional. Highly efficient, confident communicator with both clients and on-site staff. A team player, not easily flustered, who enjoys the challenge of on-site problems.

A versatile Civil Engineering and Project Management Masters graduate with proven track record of management of complex engineering projects pursues a career in the Project Management field.

have experience in plumbing,welding,heating,airconditioning,boom trucks,forklifts,mechanic,coreing machine,construction and fabrication,and have experience on a bobcat around 40 hours

Electrical power sales engineer, building &construction projects, ATAP division-LVS, ABB Arab S.A.E.

Instrument Construction, Comissioning of DCS & ESD

Civil Engineer With Project Management & Primavera, MS Project, Auto CAD & STAAD Skills

install engineer of refrigeration and air conditioning systems, also general plumbing

MBA, PMP Certified, PE(Texas), looking for a senior management position in a oil & gas company.

Design Engineer

Safety Professional with over ten years experience in the EH&S field working on major construction projects, turnarounds, expansions, revamps, startup and commissioning and maintenance in the oil/gas, petrochemical, and power plant industry. Hold professional certification as a CHST.

Afifi A/C Establishment Al-Khobar, Saudi Arabia as a Project Engineer.

SUMMARY · Bachelors Degree in Engineering Technology · 5 Years Commercial Project Management Experience · Previous to securing my degree I have 15 years experience in construction accounting and management.

My current contract –FCEO for United Nations (UNDOF Syria/Israel)- will be finished June 04. In the last fourteen months I could learn a lot about how to deal with the morals and costumes in Middle East, therefore my preference is an (construction) engineering/manager job in this area

Have working knowledge of all aspects and stages of a construction project. Know what it takes to meet safety demands, schedules, productivity, and quality. Bechtel trained and certified in many fields, for example, certified rigging and crane instructor.

Post Graduate in Advanced Construction Management from NICMAR, Hyderabad. 1 year of work experience,8 weeks of managerial summer internship in a construction firm. I can work on Primavera P3e/c and Expiditation.

I am graduated civil Engineer, has worked in two countries (Nigeria and Pakistan) before. cv can be sent as attachment.

5 years of experience in the field of civil construction and Designing , Estimation of Under Ground Drainage system , Water supply distribution , feed mains, Storm water drain , Road and Drains. Presently working for M/s NCPE as project Engineer

14 MONTHS EXPERIENCE IN BELLELI SAUDI HEAVY INDUSTRIES, SAUDI ARABIA AS PRIMAVERA PLANNER. 5 YEARS EXPERIENCE IN RIYADH CABLES GROUP AS PLANNING ENGINEER

Breakdown Quantity for Project Construction, Mining and Project Control specialist.

X-STEEL OPERATOR, DETAILING, CIVIL DRAFTSMAN

Huamn Resource, Microsoft Works, Excel, and Word, Adobe Illustrator and Photoshop, Ouark Program and Act, Quickbooks, PeopleSoft, Tri Com, Bull Horn,Data Entry, 50wpm

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 [ 41 ] 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out