Resume - 15-years of experience as Document Controller for vendor & design documentation ...

Misco Jobs

Resume #39929

CONTACT INFORMATION:
View contact information...

POSITION APPLIED FOR: Document Controller

Filipino citizen, male, married, civil engineering graduate, computer literate and have experience of Microsoft Word, Excel, Powerpoint Access, Outlook, Microstation, Engineering Document Management System (EDMS), Project Document Management System (PDMS), Saudi Aramco QVP & PlantDoc programs and Qatar Petroleum ASSAI program (EDMS).

15-years experience in oil and gas major construction projects, ability to classify and interpret petrochemical, refining or oil & gas industries vendor and design project documentation, vendor information flow and drawing distribution. Capable to work in a team environment involving multiple cultures, good knowledge of spoken and written English language and can converse basic Arabic.

Ability to generate a tracking system for vendor and design documents that gives automated result both for Management and Contractor basis. Can type 65 words per minute and hold a valid passport and Philippines & State of Qatar drivers license. In good health, includes sight and hearing. Play tennis & basketball.

SUMMARY OF WORK EXPERIENCE:
Position: Document Controller – QP Call Off Employee
Project: DUKHAN GAS LIFT PROJECT
Qatar Petroleum, Doha, State of Qatar
From February 05, 2005 to Present

Responsibilities:
Ensure that the Project Task Force and Contractors are following the guidelines set out in the Qatar Petroleum Engineering Business Department – Major Project Document Control Procedure.

Act as Focal Point for Project Technical Document Control.

Ensure Documentation complies with an acceptable standard of quality and format.

Signs copy of Contractor's Transmittal Sheets. Follow-up and expedite the overdue responses from the Focal Point. Transmit urgent and critical documents on the priority target dates. Transmit comments to Contractor with in the contractual Review Cycle.

File and maintain the latest revision status f documents and drawings in Project Master File. Maintain an editable record of Technical Documentation and Project specific correspondence from Contractors. Maintain a current and superseded set of Project hard copy deliverables and Electronic Register of such. Maintain file of Project specific QP Codes and Standards and Industry Standards.

Properly archive superseded documentation upon Project completion. Arrange copies of documentation from external sources, for Project use, as required.

Ensure accuracy of online registers/action log, and its accessibility to Project Task Force team. Prepare and issue documentation Overdue/Exception Report to Head of Technical Services.

Maintain accuracy and integrity of Contractor's Document Control Database.

Conduct a documentation review of the Final As-Built Project Dossiers, upon Project completion.

Interface with Contractor, Project Disciplines and Departments on documentation issues.

Position: Senior Document Controller
Project: BI-3022 – Qatif Producing Facilities Projects
Berri Gas Plant, Saudi Arabian Oil Company (Saudi Aramco)
Location: Jubail, Kingdom of Saudi Arabia
Interact with TECHNIP SAUDI ARABIA (TPSA)
From December 13, 2003 to February 03, 2005

Position: Senior Document Controller
Project: BI-3174 – Water Treatment Plant Replacement
Uthmaniyah Gas Plant, Saudi Arabian Oil Company (Saudi Aramco)
Location: Uthmaniyah, Kingdom of Saudi Arabia
Interact with SHAIBAN AL-SHEBAN COMPANY (SAS)
From August, 2003 to December 11, 2003

Position: Senior Document Controller
Project: BI-3174 – Water Treatment Plant Replacement
Uthmaniyah Gas Plant, Saudi Arabian Oil Company (Saudi Aramco)
Location: Uthmaniyah, Kingdom of Saudi Arabia
Interact with S.A. KENT COMPANY (S.A. KENT)
From February 01, 2002 to August, 2003

Position: Senior Document Controller
Project: BI-3175 – Acid Gas Flare Header Replacement
Uthmaniyah Gas Plant, Saudi Arabian Oil Company (Saudi Aramco)
Location: Uthmaniyah, Kingdom of Saudi Arabia
Interact with S.A. KENT COMPANY (S.A. KENT)
From February 01, 2002 to February, 2003

Position: Senior Document Controller
Project: BI-3518 – Replace Sgp Sf6 And Oil Switches
Shedgum Gas Plant, Saudi Arabian Oil Company (Saudi Aramco)
Location: Shedgum, Kingdom of Saudi Arabia
Interact with AL-RUSHAID CONSTRUCTION CO. (ARCC)
From November 01, 2001 to January 31, 2002

Position: Senior Document Controller – Vendor & Design Deliverables
Project: BI-3418 – SGP Debottlenecking Project
Shedgum Gas Plant, Saudi Arabian Oil Company (Saudi Aramco)
Location: Shedgum, Kingdom of Saudi Arabia
Interact with SNC-LAVALIN (Canada) and FAFCO Company
From March 01, 2000 to October 31, 2001

Main Responsibility:
Coordinate, issue and update all Project related documents and vendor/design drawings, including but not limited to contracts, project deliverables drawings and reports to ensure all interested parties have the latest and current versions of documents.

Job Description:
Establish and maintain systems for the maintenance and control of all Project documents to ensure the Project team and other Contractors are using the latest copies of documents.

Establish filing system. Develop engineering, vendor drawings and specification register, monitor and update the database of archived documents.

Ensure proper receipt, registration, distributing and filing of engineering and vendor documentation and notify Project Management engineering team regarding latest revisions of construction drawings and manuals received in a timely fashion.

Maintain the document control database, identify and propose enhancements, coordinate enhancement development, implementing and testing. Assist Administration staff with data entry and processing.

Distribute updated copies of all documents to the relevant Contractors and coordinate the return and destruction of superseded documents.

Redraft and update document and data control procedures to ensure it is consistent with Project deliverables and systems.

Carry out frequent site visits to collect technical data and dimensions from site to allow various discipline engineers to produce technical reports and drawings.

Supervise and verify vendor/design as-built information submitted by contractors for review and approval. And ensure comments are incorporated to final drawing submittal.

Supervise and verify requirement of project record books submitted by the project Contractors.

Classify project documentation for archiving and produce list of expire documents that are recommended for destruction and submit to the concerned department for action. Arrange for the destruction of duplicate and expire documents.

Position: Senior Document Controller/As-Built Coordinator
Project: Shaybah Downstream Processing Facilities
Abqaiq Plants, Saudi Arabian Oil Company (Saudi Aramco)
Location: Abqaiq, Kingdom of Saudi Arabia
Interact with TECHNIP FRANCE (TP) and LG COMPANY (LG)
From August 15, 1999 to February 28, 2000

Position: Senior Document Controller/As-Built Coordinator
Project: Abqaiq Gas And Oil Separation Plant (GOSP No. 3)
Abqaiq GOSP No. 3, Saudi Arabian Oil Company (Saudi Aramco)
Location: Abqaiq, Kingdom of Saudi Arabia
Interact with S.A. KENT COMPANY (S.A. KENT)
From January 01, 1998 to August 14, 1999

Position: Senior Document Controller/As-Built Coordinator
Project: Upgrading Uthmaniyah Gas Plant
Uthmaniyah Gas Plant, Saudi Arabian Oil Company (Saudi Aramco)
Location: Uthmaniyah, Kingdom of Saudi Arabia
Interact with FOUAD ABDULLAH FOUAD & CO. (FAFCO)
From October 28, 1997 to January 01, 1998

Main Responsibility:
Develop, implement, maintain and centralize project coordination procedures and document control functions.

Job Description:
Implement Saudi Aramco Drafting Manual and Procedures for vendor and design drawings to Contractors and Project Management Team.

Establish filing system. Develop engineering, vendor drawings and specification register, monitor and update the database of archived documents.

Ensure proper receipt, registration, distribution and filing of engineering and vendor documentation and notify Project Management Team regarding latest revisions of construction drawing and manual received in a timely fashion.

Coordinate with Saudi Aramco Drawing Control Unit (DCU) personnel regarding additional project drawings, drawing and revision numbers, cancellation of drawings and status report of project per budget item.

Coordinate with the project designer regarding issued for construction, field and as-built revision numbers for engineering drawings and request latest and missing drawings required by the project.

Assist Project Management personnel in providing latest drawings and other documents to support technical inquiry by the Contractors.

Carry out frequent site visits to collect technical data and dimensions from site to allow various discipline engineers to produce technical reports and drawings.

Supervise and verify as-built information submitted by contractors for review and approval. And ensure comments are incorporated to final cadd submittal.

Supervise and verify requirement of project record books being submitted by Contractors.

Prepare reports on progress and shortage of project drawings to PMT engineering on a discipline basis and to Management on a Contractor basis.

Arrange scanning/copying of final document to be handed over to project Proponent.

Classify project documentation for archiving and produce list of expire documents that are recommended for destruction and submit to the concerned department for action. Arrange for the destruction of duplicate and expire documents.

Perform other assignment arranged by immediate supervisor or senior project engineer.

Position: Document Control Specialist
Company: Saudi Arabian Oil Company
Engineering Drawing Services Department, Dhahran, Kingdom of Saudi Arabia
From September 20, 1991 to September 04, 1996

Position: Senior Document Controller
Company: Saudi Consolidated Electric Company
Engineering Drawing Control Unit, Dammam, Kingdom of Saudi Arabia
From August 11, 1989 to March 21, 1991

Main Responsibility:
Establish filing system. Develop engineering &vendor drawing and specification register.

Ensure proper receipt, registration, distributing and filing of engineering and vendor documentation and notify Project Management engineering team regarding latest revisions of construction drawings and manuals received in a timely fashion.

Arrange printing, collation and distribution including preparation of covering letters or documents for external issues.

Ensure applicable reports or statistics are available for project or client.

Classify project documentation for archiving and produce list of expired documents that are recommended for destruction and submit to the concerned department for action. Arrange for the destruction of duplicate and expire documents.

Position: Assistant Project Inspector – Civil Works
Company: Jacinto And Sons Builders
Engineering Department, Lucena City, Philippines
From January 16, 1987 to July 31, 1989

Main Responsibility:
Monitor and inspect of progress of construction development to ensure that the same is accomplished as scheduled and according to the prescribed builder quality standard.

Inspect accomplishment of activities as schedule and ensure the quality of contractor workmanship, before, during and after the construction.

Prepare weekly inspection report and result to management and memorandum to Contractor who did not comply with the work standard set in the plans and specifications.

Supervise inspection done by trade inspector. Verify and approve material request and check the quality before installation,

Position: Assistant Maintenance Inspector – Civil Works
Company: Jacinto And Sons Builders
Engineering Department, Lucena City, Philippines
From June 04, 1984 to January 15, 1987

Main Responsibility:
Review availability of staff and equipment use by the Contractors. Update monitoring agenda of activities and prepare crash program. Monitor and ensure efficient usage of filed equipment. Prepare and submit periodic accomplish reports, and participate in the weekly field coordination meeting.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 3851 to 3900 of 4805)

Go to Search Parameters...

Brief Description

Multi tasked in the construction filed. SAP 4.6, Lotus Notes, Act, JD Edwards, Microsoft, Access, Material handler, Tool-Room, A/P & A/R, Procurment, Human Rescources duties

HSE Manager, Advisor for International Oil/Gas Company, Led Assets to top quartile performance. Graduate engineer and Certified Safety Professional

I have 8 Years exp in Oilfields & industrial: as an instrument forman to maintain all process erlated instrumentation works includes automation

QA/QC in Air cooled Heat exchangers, Boiler,Structurals, Wind mill tower, Mines equipments,etc..

Very experienced in Logistics, Procurement, Warehousing, Material Control.

Barge Master, Barge Superintendent, Rig Mover, Marine Coordinator, CSR, Operations Manager 24 years experience in offshore Construction and Drilling

Vast Experience in Document Control, Administration, Human Resourses and IT

I have previously worked as a Mechanical Engineer for a Japanese EPCC Company (Shinryo Malaysia Pty Limited) for five (5) years specializing in Quality Assurance / Quality Control. My last project for Shinryo Malaysia was for Malaysia’s largest Oil & Gas Company Petronas in Helsinki, Finland.

Hands-on engineering and construction individual with extensive experience in all stages of the industry, project & site support, field & maintenance engineering, technical expertise and interpersonal skills in order to function within a multi-discipline team or operate within a stand-alone environm

W/WW industry: 28+ years experience in construction & operations and maintenance; electromechanical and site management skills; specialist in process component of W/WW systems

Mining Engineer with surface, underground, contracting, industrial minerals, metal mining, hard rock mining, block caving, narrow vein, cut & fill, dragline, international, process, frontline shift supervisory, mine planning, & permitting experience

Licensed professional civil engineer. Have worked mostly in construction as either an owner or an owner's representative. Enjoy doing field work and would like to work in a foreign country.

HR, Payroll, Operations

Professional Engineer, MBA, offshore oil & gas, Quality management, 11 years

Extensive experience in supervision and inspection of structural and architectural works for high rise buildings, residential, commercial, industrial, roads and bridges and large infrastructure with an over all responsibility for successful and timely project delivery

I am an Multi Skilled Engineer Currently working at Road Development Authority, Sri Lanka

MIT educated program manager/engineer seeks full-time employment in engineering, financial modeling/investing, or engineering management involving optimization, system identification, simulation, graphical user interface design/implementation, and/or control system design/analysis.

I am Diploma Engineer with total 6+ Years of experience in various engineering field, particularly 5+ years of experience in piping/pipeline Design Engineering for Onshore projects. Presently working as a Pipeline Designer for M/s. Worley Parson Engineering LLC., Oman

Bachelor of Engineering_3 years experience in petrochemical construction field

A position where I can use and enhance my Linux/Unix, POS, PKI, Smartcards and network security skills in a company where I can contribute with many years of hands-on experience

Systems Engineer - Project Planning & Control Specialist. Oil & Gas / HVAC / Construction

Hand and computer skills+designs, calculation and workshop drawings+site coordination

Project Manager (Electrical, Alarm Applications, Construction,Safety)

Perform environmental / safety audits Perform industrial hygiene surveys industrial processes, sewers, wells & tanks air, soil, solid waste, wastewater and water minimization and disposal of non-hazardous and hazardous waste potential or existing hazards for a wide variety of manufacturing OSHA

AUTOCAD

Civil engineer with 7 years experience.

Mechanical CAD Design Product and Tooling Development Engineeer

Extensive experience in Civil Engineering CAD Designer/Drafter field, in positions requiring supervisory, administrative, analytical and IT skills

Skills in various disciplines such as Welding Inspection, Plant Inspection which includes static equipments and piping, Material Testing, Failure Analysis and Lifting Inspection.

Long term experienced : wanted , Painting Inspector , Paint Superintendent or Technical Sales

•Fabrication, Erection & Inspection of piping using CS, SS, GRER. •Preparation of Piping Test Packages, Mechanical Clearance Inspection & Pressure Test Inspection with Client. •Controlling of test packs from Site & QC department.

Extensive experience in Engineering, Scheduling, Cost Control and Quality Assurance in Power Generation, Bio-technology and Manufacturing industries.

I have been trained and have experience integrating the spectrum of the logistics processes within the operational, acquisition, and wholesale environments. The major logistics processes include distribution, materiel management and contingency operations. Duties included directing and managing dis

Sr. Planner, Scheduler, Risk Management using Monte Carlo Simulation

Design and Construction, Engineering, Calculations, Quality control, Installation and Start Up of new Equipment, Electrical and Electronics Repair and Maintenance

Hands-on skill in Allen Bradley PLC, SLC, Panel Builder 32, RS logix, Frequency Drives,HMI software, SCADA-DCS, Industrial Mechanics and in Broadcast Transmitter.

Bachelor of Engineering (Electronics & Instrumentation) & Master of Technology (Process Control & Instrumentation). Experience in Advanced Process Control & Instrumentation. Total years of experience: 3 Years

Over 20 Years Experience Process Operator,Commissioning and Start Up Heavy Oil ,Oil and Gas Production

Trucking experience 20 plus years, good on tools, excellent mechanical understanding

15-years of experience as Document Controller for vendor & design documentation in gas and oil industry.

Experienced electrical sales, buyer, customer service,contract negotiations,job bidder

I am Aldrin Entac, male, single and 26 years old. My Present work Exposed me in Construction Site, working on ELV system Company as a Site supervisor for BMS (Building Management System) Structured cabling System,Security System, Audio Video System, Broadcasting System, GSM System, TETRA System etc

Land surveyor with over 30 years experience

Electrical, Instrumentation, SCADA

DCS Engineer working on power and oil & gas facilities

BSc Geology (University of Botswana) 2001-2005, GDE Mining (Rock Engineering) University of Witwatersrand, Johannesburg, South Africa 2009-Current. Geologist - geological and geotechnical core logging, scanline mapping, soil profiling and chip logging. Diamond and percusive drilling supervision

I am having more than 3 years in Oil & Gas Refinery Field Constructions & I am worked as Materials Engineer, Engineering Coordinator, Planning Engineer & Now i am working as a Planning Engineer in GPS, Oman.

Extensice technical skills incorporating computer literacy & engineering discipline. Highly regarded for a proactive attitude and an ability to thinl literally, providing idead & solutions. A dedicated individual, achieving reputation for consistently going beyond what is required.

Environmental Health Safety and Emergency Management Specialist / Safety Trainer in Oil and Gas, Petrochemical and Marine Industries with 15 years experience.

Experienced underground hard rock miner. Any way you can point your finger I have mined

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 [ 78 ] 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out