Resume - Contract working, supervision of dam construction, geological worlks etc.

Misco Jobs

Resume #40054

CONTACT INFORMATION:
View contact information...

QUALIFICATIONS:
1. Master degree in Applied Geology from Hashemite University 2005 with V.good.
2. Bachelor degree in Earth & Environmental sciences (Geology) From Hashemite University, with an average of (Good) in 1999.

FIELD OF INTERESTS:
1. Dams Construction
2. Environmental Issues
3. Water Issues
4. Geology Works

PROFESSIONAL TRAINING:
1. Course of computer skills (15/2/1999-15/8/1999).
2. English Language (Reading, Writing, Speaking)
3. Turkish Language (beginners Speaking)

Title of Master Degree:
"Assessment of Grouting Efficiency Using Geophysical and Engineering Geological Investigations, Case Study: Mujib Dam Project, Jordan Valley"

EXPERIENCES:
* Geology Engineer in Al-wehdah Dam Project since 11/06/2005 Until Dated. (Ozaltin Turkish Company)
* Grouting Inspector in Al-Wehdah Dam Project since from 1/9/2003 up to 01/05/2005. (Harza Company MWH in Association with Consultant Consolidated for Engineering & Environment)
* Grouting Inspector in Mujib Dam Project during the period from 15/8/2000 up to 30/4/2003. (Joint Venture Lahmeyer International-Hamza Associates in Association with ACE).
* Additional Teacher in Military Schools in Wadi Araba-Rahma during the period from 27/8/1999 up to 15/6/2000.
* Volunteer Lecturer (5 lectures) about Dams, in Jordanian Universities.2005.

RESEARCHES:
1. Environmental study for Zerqa Area (1998)
2. Water pollution & waste disposal (1999)
3. Environmental impact Assessment (1999)
4. Comprehensive Study, Mujib Dam project (2001)
5. Gypsum (Origin,Deposition,Uses,Production)(2002)
6. Actual Dams in Jordan & Future Plans (2004) in Arabic
Edition 2nd.
7. Dams studies (2003)

MEMBERSHIP IN ASSOCIATIONS:
1. Jordan Environment Society (JES) 1999
2. Jordan Geologists Associations (JGA) 2000
3. Fertile Crescent Environment Society (FCES) 2000
4. Jordan Aqua Conservation Association (JACA) 2002

REFERENCES:
Upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1551 to 1600 of 4805)

Go to Search Parameters...

Brief Description

Mining Engineer / Project / Operations Manager

I have completed B.Tech in the field of Electrical Electronics Engineering at 2009 and I also completed Diploma in the same field at 2005. I have a year Experience in Government Electricity Department at 2005-2006 in Puducherry, India. I attached my CV for your kind considerat

Have a vast professional experience in road construction; Can handle high pressure with ease and open mind • have handled various critical and challenging projects from design stage to implementation stage and ensured that the projects gets implemented as per specification in stipulated time with

Experienced safety professional and proven leader in the Environmental Health & Safety environment. I've developed and successfully implemented several innovative injury prevention programs which has resulted in millions of dollars saved in Workers' Compensation expenditures.

Ironworker, sheetmetal mechanic

I am Nechifor Cristinel. I worked in power plant, refineries, oceanic platform with different operations for electrical maintenance, commissioning, construction as electrical technician , electrical inspector or electrical supervisor last time.

Project Construction Manager (Fabrication, installation, Offshore Hook-up)

Process Engineer - Oil&Gas - Sulphur - Refinery

Asphalt Plant Manager/Foreman 38 years in asphalt production field

AutoCAD, ADT,3 DS Viz, MSOffice, C, C++, Unix,ProE

My qualifications are reinforced by over 20 years of Industrial Insulation as a front line supervisor. Multi-tasking for the past 5 years as a Painting Supervisor as well as Insulation Supervisor, has expanded my talents to a broader range that may well serve you better.

Engineering, cadd designer, autocad, microstation

Industrial Engineer, with more than 9 years Experience in Planning and Cost, in EPC and developmental projects, both onshore and offshore. Worked in Oil,Gas,Petroleum and Automotive field.

project in erection, maintenance and up gradation project of 40 MW power station and

Over 16 years of experience in leadership roles within complex operations, supervising diverse teams and managing challenging programs/assignments within U.S and international locations

Highway Laboratory / QC Manager with 25 years experience in materials

I am a skilled solid tradesman with a solid family looking for interesting ,rewarding employment.

Senior Weld Mgr / Engineer. I have for decades specialized in providing management support for the implementation of Best Weld Practices and the establishment of Weld Process Controls. I

Contract working, supervision of dam construction, geological worlks etc.

Electrician and editor of substation

Seeking a position in management with the opportunity for further career advancement through using sound judgment and personal performance. Will consider a staff position with opportunity for advancement.

BS biomedical engineering, looking for a job where i can use my knowledge and skills to overcome the problems.

I have done the project for International Power name "Feasibility of Electrical Energy Saving at HUB POWER station. and I can design different kinds s controlling circuits by using microcontroller,PLC and VFD.

A position of significant responsibility that builds upon extensive experience in construction management, expertise in managerial skills and cost analysis. Ultimate goal is to grow within and with the progressive organization that provides excellent career advancement opportunity

5 year appreniceship as diesel mechanic. 5 years experience as engineer in British Merchant Navy .Conversant with Caterpillar, Terex, and Aveling Barford earthmoving equipment , various supervisory positions worldwide in different disiplines

I AM A LAND SURVEYOR WITH CERTIFICATE QUALIFICATION.I HAVE 8 YEARS WORKING EXPERIANCES AS A LAND SURVEYOR IN CONSTRUCTION AND TITLE WORK IN MALAYSIA AND OVERSEA.

Repair & maintenance of plant & equipments used in construction, knowledge in overhauling of engines used in construction equipment, maintaining & preparing all technical reports related to plant

journeyman lineman service, const, underground cdl cpr overhead switching

I am a university-educated Canadian Registered Safety Professional with over 15 years of Environment, Health and Safety experience. This experience has included the development and implementation of EHS management systems, training programs, risk assessments and emergency response plans.

I have worked and performed 2 (two) years as HSE (Health Safety & Environment) in construction which one year in oil & gas project (pipeline and gas plant) and one year in civil package, erection in reconstruction cement plant project.

Over twenty-five years experience in Project/Construction Management in an Engineering Procurement and Construction Management environment, specializing in Project Controls, Planning and Scheduling. Project Controls background includes EP, EPC and EPCM.

Diploma in Mechanical/materials management with 17 Years expereice in Material Controlling and Piping looking for employment with reputed organisations.

QA/QC Supervisor, Welding Inspector

I am searching for offshore employment as a crane operator. My specialty is the Tower Crane. I have operated many types of cranes up to 250 ton.

Electro-mechanical overhead crane repairman

Estimating,Quantity Surveying, Project Planning & Project Management

MILLWRIGHT Detailed oriented Gold and Red Seal (V1984) experienced Journeyman Millwright Foreman with experience in construction and petrochemical plant environments.

extensive experience in the field of pre-cast concrete products

Piping Designer PDS CAD

I am capable to handle Administration, Partner with HR, Security, Procurement, Vendor Management, Liaison and other assigned work given by the Management.

12 years of experience working in the oil and gas industry for production, service and engineering companies as planner/scheduler, cost controller, service planner. Experienced in scheduling and cost control procedures, data collection/entry/processing and analysis, data base maintenance, used speci

Rigger, works well at height

Basic education:College of Business Administrartion, Secondary ed. of engineering. Advanced sch: WTA ind.eng.; ISO Quality systems; Turu col of econ. int.marketing; Different schooling in marketing/sales. Lang.: ENG;RUS;FIN; EST. PC-MS Office; MS Project;ind.controllers user interf. Driv.Lic ABCE

I am a senior attending California Polytechnic University, Pomona, and I will be completing my Bachelor’s degree in Mechanical Engineering, along with a Minor in Materials Engineering Sciences, in the fall of 2009. I am currently seeking an internship or entry level position.

Mechanical Master, Master Gasfitter

Dynamic, highly adaptive professional offering 20+ years’ experience.

Electrical

Technical /Project Engineer

Electrical Engineer in profession, Knowledge in instrumentation and control, Design and trouble shoot's motor control, can do hard wirings,

AutoCad 2007, Sketchup, Inventor, SolidWorks

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 [ 32 ] 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out