Resume - Electric Engineer

Misco Jobs

Resume #40744

CONTACT INFORMATION:
View contact information...

EDUCATION: B.Sc. Electrical Power Engineering 1972.
Faculty of Engineering, ALEPPO University.

LANGUAGES:
Arabic / English fluent speaking & writing.

EXPERIENCES:
I. 1997 TO 12-10-2004:
Position: E&I Department Head & QA/QC Manager.

Duties: To ensure all projects are constructed on time, safely and within budget by coordinating projects, planning, man power utilization, materials & equipment deliveries & timings to their optimum opportunity. Correlate information and ensure availability as necessary, incorporating vetted procedures & specification. Liaise & communicate with client, vendors, other contractors of all disciplines, attend meetings, enabling accurate and precise information availability to brief project manager on overall status.
Additionally complete control of all construction, installation & erection activities, all testing, pre-commissioning & commissioning, including DCS
system, with added responsibility for training clients direct hire staff.

Testing & pre-commissioning essentially include:

1. DC/AC high potential testing for Cables, Over head lines, Motors Transformers,
Switchgears and all high voltage equipments.
2. Primary current injection.
3. Secondary current injection for relay calibrations.
4. Cables insulation & conductors continuity testing.
5. Bus bar low resistance Ductor testing.
6. Earthing resistance measuring.
7. Cathodic protection survey & testing for under ground P/L
8. Loop testing.
9. Pre – energizing and preparation for energizing.
10. Energizing, synchronizing generators and transformers.

Projects I have worked on are the following:

1. Provision of Additional Construction-6th Pump. Contract No 52-31014-3
2. HAOUD EL HAMRA - ARZEW OZ2 Phase II SP4/SP6. Contract No OZ2-SP/DEV/2001
3. Ohanet Gas Development Project Contract No 09789-2526/C–5 (S1)
4. JAFRA Gas Lift Project. Contract No DEZPC-04-02
5. Al-Keshmeeh - Jido Gas PL. Contract No 15-2004-D
6. OZ2 Phase II SP4/SP6 PROJECT. Contract No OZ2-SP/DEV/2001
7. Omar Power Station Extension - 5th Gas Turbo generator. Contract No S-59-2002
8. Ohanet Gas Development Project. Contract No 2526/C-5(S1)
9. DEZ Gas Project & Gas Gathering. Contract No CSDGL–99–009
10. Omar Power Station Extension - 4th Gas Turbo generator. Contract No 41-99-P
11. SABAN / JARNOOF Expansion. Contract No 14-99-P
12. Engineering Services Contract. Contract No 16-98-P
13. AEA Norm Decontamination Facility. Contract No 48-97-S
14. EL ISBA PH III Gas Compressor Project.. Contract No C-5-90250

II. 1995 – 1997:
Manpower delivery contract with TITAN Projects LTD Canadian company.
For Palmyra gas project Include (Inspection team, Construction engineers & Skilled technicians).

III – 1990 – 1995:
Position: Electrical Engineer & QC Engineer.

Duties: To implement department heads directives & feed back accurate status information on all projects, verification of standards & specifications which are project applicable & their pertinent planning. Liaise & communicate with client, vendors, other contractors of all disciplines, to achieve timely & controlled completion.
Complete control of construction, erection & installation, testing, pre-commissioning & commissioning – including C/P & DCS, with training of clients direct hire staff.

Projects I have worked on are the following:

1. Omar Power Up Grade Project Phase II.Contract No: C-4-90090
2. THAYYEM Gas Lift Project.
3. TANAK Phase III Project.
4. SIJAN, SABAN, GALBAN AND AL AHMAR MPF Project.
5. GAWARI AND ABO HARDAN EPF Project.
6. OMAR Phase III Project.
7. POWER Up Grade Phase - I.
8. OMAR Phase II Project.
10. OMAR Gas Plant Project.
11. MALEH EPF Project.

IV. 1976 – 1990:
Position: Electrical & Instrumentation Construction Supervisor During Construction
Period And Steam Power Plan Supervisor During Operation Period.

Duties: To monitor, maintain & correlate a portfolio of all relevant conforming information as dictated by the electrical discipline philosophy requirements for all projects, prepare & maintain an acceptable register of dedicated tests, planning & progress, to achieve accurate and up to date hand over packages & manuals through contact, control & liaison with all discipline personal.
Additionally in control of construction supervision, commissioning, operation, maintenance & training.

Projects I have worked on are the following:
1. General Company For Pulp & Paper Industry / DEIR EZ ZOR
2. AL FURAT Company For Textile Industry / DEIR EZ ZOR

Plant worked at and type of Equipment:
1. 5 – 50 MVA Gas Turbines.
2. 25 MVA Steam Turbines.
3. 0.5 – 50 MVA Transformers.
4. 20 KV – 66 KV Over Head Lines.
5. 2000 HP / 20 KV Electric Motors.
6. 2000 HP / 6.6 KV Electric Motors.
7. 2000 HP / 3.3 KV Electric Motors.
8. All Electrical Equipments & Control Panels Auxiliary For Petroleum & Gas Production Facilities.

V. 1973 – 1976: Military Service

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 151 to 200 of 4757)

Go to Search Parameters...

Brief Description

Self-motivated, results-oriented professional with extensive international experience with multinational firms and government-owned facilities in the construction, shutdown, and refurbishing of oil, gas, petrochemical, and power facilities and plants.

Over 20 years of extensive experience as an international consultant. Provider of structural software for the analysis and design of concrete & steel according to ACI, AISC & API codes of practice. Expert in; structural systems & forensic investigation. Professional in; STAAD III & MS office Suite.

Graduated in B.Eng civil 1976 and Post grad Hydraulic in 1982, total 28 years experience in civil, infra such as steel, timber, road, car park structures and sewer and pipe laying as well as tunnels and pipe jacking works.

Free! Experienced Heavy Civil & Design Build Construction Project Manager with additional experience with Project Controls/Scheduling/Claims Resolution Management.

Refractory sales and Technical support

B.E.(Mech.) & BEE certified Energy Auditor

I am a civil engineer with more than 12 years of experience in Mauritius. I hold a first degree in civil engineering, a master degree in environmental engineering and another master degree in business administration. I already got my Permanent residence for Australia since July 2008.

Licensed Journeyman Electrician, thirty four years experence, Industrial, commercial, residential, and oil field

Mechanical project &maintenance engineer with 17 years of industrial experiance.

Mechanical engineer in cement Plant

Over 16 years of experience in construction industry local and abroad. Responsible for completing the project within time and within cost.

HVAC Professional Having 17 Years of rich Experience in Major MEP projects,expert in handling fast track projects with in project time frame and budget..

Engineering and construction executive with MS in civil engineering and construction management and BS in general engineering, with extensive hands on and executive level experience in project, construction, and contract management in multi-deceiplinary projects in the international arena.

Quantity Surveyor 3 yrs experience in Gulf

MEP Cad Designer / MEP Cad Coordinator / HVAC Designer

Knowledgeable in electrical, mechanical, and some electronics

electrical contractor for 25 years and have a ton of experience in the electrical field.

all-round civil engineering background with experience in traditional building constructions and special structures, such as bridges, tunnels, towers, piers and offshore structures including design, planning, project management, quality assurance and supervision.

Extensive experience and skills to help industrial organizations improve their effectiveness through better use of processes and systems. Also very proficient in development and use of integrated improvement teams.

Knowledgeable and experienced Design Procedures with 15 years road construction experience

Construction project manager

20 years in Oil/Gas in Eng. ,Procur.and Construction including Piping Design in accordance with international codes, Procurement Technical Services & Construction Supervision. Management of Eng. Staffs in Multinational and International Environments Conversant with ARAMCO and SHELL DEP Specs

Instrument technician - PLC/DCS programmer

Civil Marine, Dredging & Coastal Engineering. record: 70 projects

Road works

I have 15 yrs experience in construction supervision of roads and bridges (RCDG), concrete slope prot. works, RCBC and concrete retaining walls. Presently I am working in Saudi Arabia as Civil Engineer handling big highway proj. designed for asphalt pavement.

Sr Instrument Engineer with over 15 years experience in the design and specifications of instrumentation for petrochemical plants, and 2 years for offshore platforms

Structural/Geotechnical Engineering jobs such as Pile design, Retaining wall design and project management

Hands on site experience in infrastructure works (roadworks ) and buildings works with total 19 + years experiences ( supervision and project management)

Licensed professional engineer with over twenty-seven years of structural design and deliverables production experience for Industrial, Commercial, Residential, Oil and Gas, and Transportation projects

I have 17 years of Planning experiences within oil and gas, petrochemical, mining, power plant and industrial plant construction. I am also an advance user of P3/P5/P6.

B.E. with 22 years of experience in Highways, Industrial and Building construction, out of which 3 years in Saudi Arabia. The experience includes-

I am a sri lankan working in oman -presently in the field building services as an engineer. Capable of designing - cold & hot water supply systems, sanitary plumbing stsems and fire fighting systems)

Pressure Welder, Pipe Welder with 20+ yrs experience, Hard working

I have been in Truss deaign,layouts,and engineering for approx.36 years. I have experience in single family commercial,spealizing in multifamily design of beams, componets,floors and roof trusses

QA/QC Electrical Engineer

Total station operator

15 year of experience in the glass and aluminium industry

Application for the post of project manager/ section manager

heavy equipment operator sewer and water forman

Project/site /operations manager

Debasis is a geotechnical engineer and numerical modelling specialist within Scott Wilson’s Ground Engineering team. He is currently responsible for numerical modelling and geotechnical design input for tunnel linings, retaining structures and earthworks working on a variety of infrastructure sche

hi looking for job

Professional individual having Soil Investigation, Soil Improvement, Diaphragm wall construction, Quay wall construction, Piling, Drilling Techniques (All Types) Geotechnical Special Testing, Material Testing, Geotechnical & structural Instrumentation & Geological Mapping skills.

Electric Engineer

International Project Management Residential Commercial Industrial

Dip Elect & Mech Engineering + LLB + MBA

Over fifteen years experience as Certified Business Continuity Professional with over ten years experience as Project Management,Technical Writer and trainer and over a year as a SEI/CMMI Auditor, completing projects ontime and within budget.

B.Eng, Traffic and Transportation Planning and engineering, local area traffic management, transportation modelling, sidra, transyt, trips, bus transit, light rail route and station planning

Traffic Engineer with Master of Technology degree in Transportation Engineering. I have about 11 years of technical and project management experience in UAE, Qatar, India, Sudan and Saudi Arabia, in the area of traffic and transportation engineering/planning;

First 1 2 3 [ 4 ] 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out