Resume - NDT/QC UT Level III, prior RT/MT/PT/VT Level III. 25+ years experience in inspec...

Misco Jobs

Resume #42782

CONTACT INFORMATION:
View contact information...

OBJECTIVE
To secure long-term, permanent or contract employment where I can best utilize my skills and experience in providing a finished quality product utilizing appropriate engineering practices and inspection techniques.

Zachry International
Beijing China NEC

10/23/2005-Present
QC/Welding Inspector responsible for welding Quality Control on the new US Embassy project in Beijing, China. Monitor welding activities, perform UT/MT/PT and VT inspection of all structural and pipe welding, perform civil and mechanical inspections. Top Secret security clearance.

WESDYNE
Madison, PA

6/23/2003-10/16/2005
Senior NDE Specialist performing NDE inspections and examinations on rotating and pressure retaining equipment in accordance with company standards, customer specifications and ASME Section IX requirements. Have completed training and assignments utilizing RD Tech phased array, Paragon data acquisition, Intraspect single axis data acquisition and manual applications of NDE methods. Recently completed an assignment in China supervising the RT examination of RPV safe end nozzle weld replacement. Certified to LIII in RT, LII in UT/MT/PT/VT (all company certifications).

Scientech Corporation
New Milford, CT

01/03-04/03
NDE Level III (RT/MT/PT/VT) assigned to Calvert Cliffs Nuclear to perform NDE QA oversight on the NDE contractor for the Steam Generator replacement project. This included procedure and certification package review, monitoring for procedure compliance and review of final reports, including radiographic film review and acceptance.

ONDEO-Degremont, Inc
Richmond, VA

8/99-8/02 (RIF)
Senior Quality Control Inspector with responsibility for performing source and qualification inspections at vendor facilities to monitor and/or approve fabrication of manufactured and welded mechanical equipment such as pump skids, tanks, structural assemblies and piping. Verify vendor fabrication in accordance with drawings and owner specifications. Perform field inspections when requested by owners. Review contract/engineering specifications and prepare inspection and test plans based on specifications, monitor and approve nondestructive and hydrostatic tests, when required.

Granite Professional & Technical Services/GEIS
Richmond, VA

10/96-7/99
Inspector/Technician (full-time) assigned to provide Nondestructive Testing/Inspection services on projects located throughout the world. Performed Ultrasonic/Magnetic Particle/Liquid Penetrant/ Visual/ CWI and API inspections on a wide array of equipment, including but not limited to rotating and stationary equipment, turbines, pressure vessels, tanks and structural steel, and pipelines and related equipment. Acted as Lead Inspector on projects as required. Major projects included the following:

QC Supervisor contracted to Century Contractors, Matthews, NC, during the installation of two package boilers at the Merck Chemical plant in Elkton, VA. Performed all required inspections (VT, MT, PT), scheduled and monitored RT, UT and PWHT, performed walk-downs, scheduled and witnessed hydrostatic testing, and completed as-built drawings.

QC inspector assigned to work with Flour-Daniel during construction of the Philip-Morris Expanded Tobacco Project in Richmond, VA. Performed system walk-downs, witnessed hydrostatic testing, monitored and inspected welding and performed MT/PT and all UT on the project.

International Inspection Services
Slidell, LA

7/96-10/96
Ultrasonic Specialist assigned to Shell Offshore Group to monitor and inspect welds fabricated at manufacturer's facility in Taranto, Italy. Primary responsibility involved performing ultrasonic verification inspections on primary support components of Shell's Ram-Powell platform. The purpose of the work was to ensure reliability and accuracy of manufacturers Ultrasonic personnel. Certified to Shell Offshore Specifications in accordance with API RP-2X

National Inspection Consultants
Fort Myers, FL

5/94-6/94 & 11/95-7/96
Ultrasonic Specialist-Assigned to work with Hamilton-Standard Corporation performing Ultrasonic Inspections on aircraft propellers at client sites and designated FAA repair stations. Inspections consisted of manual and automated ultrasonic methods to determine structural integrity and thickness of blades and hubs. Sites visited included Air Tahiti in Papete, Tahiti, IPTN in Bandung, Indonesia, Merpati Airlines at various locations in Indonesia, and FAA repair stations in Long Beach and Rock Hill, South Carolina. Certified to Level II in UT in manual and automated methods unique to Hamilton-Standard. Received FAA Repairman Certificate valid for the duration of employment.

2/93-4/93
Ultrasonic Specialist-Assigned to work with Shell Offshore performing ultrasonic and visual inspections of Dip Chains for the Auger-1 Platform at manufacturer's facility in Vasteras, Sweden.

Additional experience history provided upon request.

EDUCATION
Benedictine High School
Richmond, VA

Hutchinson technical Institute
Hutchinson, MN
2000 hour program in NDT Technology with emphasis on the five main NDT methods and related subjects.

TRAINING
Canadian Society for NDT
24 hour film interpretation course

Virginia Corporation
Richmond, VA
Visual Inspection, Level I-40 Hours, 1990
Visual Inspection, Level II-40 Hours, 1990

Electric Power Research Institute
Charlotte, NC
Detection of IGSCC-1990
Sizing of IGSCC-1992
Weld Overlay-1992

NIC/Hamilton-Standard
Windsor, CT
Manual and Automated Inspection of Aircraft Propellers-1995/1996
General Electric/Life Extension Services
Manual and Automated Ultrasonic Inspection Systems

CERTIFICATIONS
Level III UT ASNT Certificate # 1802
Level III RT, MT, PT, VT (with previous employers)
API 653-Certificate # 1524 (Valid from 1995-2001-exp.)
AWS CWI Certificate # 98020781
API RP-2X by Shell Offshore, Inc.
IGSCC Detection and Weld Overlay
PDI Austenitic and Ferritic Detection and Length Sizing-1996
Various company specific manual and automated ultrasonic certifications

Experienced with MS Word, Excel and Outlook.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2601 to 2650 of 4805)

Go to Search Parameters...

Brief Description

Multilingual GIS (Geogpaphic Informational Systems) professional, cartographer

Welder, Mechanic with experience in transmissions, engines and hydraulics. Also experienced in portable line boring.

Welding Engineering

M.Tech Transportation Engineer with 2+ years of experience

Safety Professional, 30 years experience construction, minin, environmental and hazmat

Master in Machine Design engg with 6+ Yrs of Exp in design,Developement & Reverse engg of machine elements and Design Support for Onsite clients.

Caterpillar Dealership, Surface and Undergound Mining Experience.

I am an Indian Mechanical Graduate Engineer with more than six years Multi-dimensional Experience in oil & gas related projects in India & abroad.

I am a highly motivated person who is incredibly conscientious and hard working with an incredible ability to get the job done in adverse conditions and time restraints. The majority of my experience has been working on all types of heavy earthmoving equipment in a vastly changing mining environment

4 year Bachelor of Engineering Graduate Instrumentation Enginee,Automation Software Development for Three level Control System and Modeling the process for the purpose of control system design.

12 years of experience in the contracts and project management in Oil & Gas EPC Projects, including 7 years working in Dubai. MBA ( Finance) graduate from Texas A&M International University and Engineering undegraduate from Cochin University in 1995.

Over three years of experience as an Electrical Engineer with a broad understanding of operations and practices for petrochemical, commercial, and industrial projects, all involving engineering and design of electrical systems. Knowledgeable in AutoCAD and Microstation.

I mastered AutoCAD and installation of pipes for the fire and the fire system. And I was able to work under pressure of time.

Free! As a thorough and outgoing leader known for getting the job done, I am committed to the highest performance and standards. I draw out the best in others, bringing quick resolution to challenging situations. I take good care of my teams, treating them with respect and training them for success.

Spie-capac-Petrofac international limited JV (AGT Azerbaijan Georgia Turkey) oil and gas pipeline project (Tbilisi, Georgia). Position: HSE Trainer

fire and safety engeeneering and fire fighting courses from god

Truck Driver / Construction Superintendent /Customer serves/Quality /Safety Inspector

Structural Designer / Draftsman

I have over 10 years experience in the field of Safety in both the construction and process industries. I have substantial hands on experience working in maintenance, plant shutdowns, and fabrication & installation of Mechanical, Piping and Structural steel work.

I am a Civil/Structural Engineer who has recently been laid off from Fluor Daniel and is seeking new employment. I have with overtime considered at each job, four years of diverse experience as a Structural Engineer

I am M.Tech Welding Engineering graduate with one year of experience in manufacturing industry.Myself specialized with WPS,PQR preparation and i am having ASNT level II certifcate in Ultrasonic Testing.

qa/qc instrument engineer with 4 years exp

QA/QC Welding Inspector & plant inspector

Civil Project Engineer (PMP®) with over 4 years experience in large domain projects.

More than 10 years experience in shipping and logistics as a Project Coordinator and customer services for both local and international 3PL, Shipping & Marine Companies.

3+yrs exp in qa/qc in highway engineering (roadworks)

HYDRAULIC MECHANIC

Quality Assurance/Quality Control COORDINATOR for Oil & Gas Projects (Pipelines, Tanks, In-Plant Piping, Pumps & Compressors Installation)

Seeking full time employment with a construction company who is need of a Loader Operator. Doesn't matter where I'm willing to move.

Looking for a plumbing position overseas

I am ambitious, hard working, challenge orientated and enjoy problem solving. I am able to work within a group or by myself.

Working as a Project Engineer since 1992.

Environmental Specialist and Project Manager, with over 18 years of experience in the Infrastructure developkent projects.

NDT/QC UT Level III, prior RT/MT/PT/VT Level III. 25+ years experience in inspection in power, oiland gas and construction

Master's in Engineering and MBA + 28 years Global Multidiscipline Projects Engineering Management Experience

Global Sourcing, Program Management & operations management specialist with over 16 years of experience with ITES Consulting (4 years plus) & manufacturing industries (12 years. Contributed to improve profitability of various business organizations through “Spend Management” & “Supplier Relationship

Skills And Qualifications

CAD Manager for Microstation and AutoCAD

Seeking Middle Level Managerial assignments in Business Development / Channel Management / Sales & Marketing with a FMCG, Automobile, Beverages oriented organization PROFESSIONAL SYNOPSIS A dynamic professional with over 4 years of rich experience in Sales & Marketing, Business Development, Chann

An experienced E&I construction supervisor/superintendent, three years college to city&guilds grade,five year apprenticeship, experienced in onshore and offshore E&I construction and maintenance, excellent communicator

Rigger

Operating all sizes and makes of excavators,dozers,backhoes,front end loaders,track loaders,scrappers,rollers,skidsters,mini hoes,bobcats,small blade,boom trucks,and hydro axe.Able to obtain all info. from blue prints and/or site plans.Capable of passing inspections foundation,building,and final.

Corrosion Control; AutoCAD drafting; Estimating; Material order; Microsoft Office; Mechanic and Architecture drafting;

10.5+ years experience EDP /ERP /IT Manager VB+SQL+ORACLE+FOXPRO

10 years experience in EPC company. Good interpersonal and communication skills, experienced as a Lead Process Engineer, HAZOP member and Field Engineer, advanced ability in value engineering, P&ID, PFD, process simulation, feasibility/conseptual study and other detail engineering

Very experienced in systems / instrument commissioning / maintenance

Qualified Electrian in UK, Worked in Petro-Chemical Industry, Supervisor, Electrical Consultant for large Bank

CISRS Registered Advanced Scaffolder, CITB Registered Advanced Scaffolder, Brunei Shell Worksite Supervisor Cert, CITB Inspection Cert, ECITB Passport to Safety.

Electrician and Electronics Technician, with military and civilian experience

Experienced construction project manager with a finance and business management background.

First Prev 51 52 [ 53 ] 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out