Resume - Safety Manager seeking position

Misco Jobs

Resume #4394

CONTACT INFORMATION:
View contact information...

Qualifications:
* 22+ years Oil Field experiences both inland and offshore. Production and Construction.
* Authorized OSHA Instructor in General Industry Hazards
* Master Trainer National Center for Construction Education and Research (NCCER)
* Trainer for Petroleum Education Counsel Offshore Orientation and Petrochemical Safety
* Trainer Scaffold Building Certified by the Scaffold Building Institute
* Trainer in Red Cross First Aid and CPR, Trainer in Medic First Aid and CPR
* T-2 certified
* Computer literate with Microsoft Office Package
* Certified by the State of Louisiana as a Laboratory Technician
* Extensive Knowledge of Hydrogen Sulfide and related sulfur compounds. Have performed varied analytical techniques to measure the amounts of sulfur compounds from part per billion to 98 percent sulfur to include sulfur studies on various metals used for sampling of gas and liquid streams containing sulfur.
* Extensive experience in the sampling and analysis of oil, gas, water and soil samples to include reservoir fluid samples.

Experienced:
Safety Supervisor
Trainer
Laboratory Manager
Quality Assurance

History:

March 2001 to Present: Safety Director TCB Industries, Inc.

July 2000 to March 2001 Safety and Compliance Representative DC International contracted to Chevron U.S.A.

January 2000 to July 2000 Safety Trainer Stars Inc.

November 1991 To November 1999 Corporate Safety Director and Quality Control Administrator. Pencor Corporation

March 1981 To November 1991 Laboratory Technician SPL Inc.

December 1972 To March 1981 U.S. Army

Prior to 1972 Residential Construction while in School Used various types heavy equipment

Experience:
Current Employer: TCB Industries, Inc.
9521 Vorhoff
Abbeville, La. 70510

Supervisor: David Craig CEO

Currently I am employed as the Corporate Safety Director with job duties commensurate with job title. In addition to these duties I was given the responsibility of Personnel Manager in June 2003. This is a general oilfield fabrication corporation with approximately 160 employees. As the Safety Director I have the responsibility for all safety compliance to include training and reporting as required by regulations. I am also required to monitor job activities on various work sites. When needed I may also train other personnel to be Safety Observers for work site monitoring. I have developed a training matrix and have written materials to be used for this training. I have also written a safety manual and a compliance manual that has undergone severe analysis by our client base with no discrepancies noted. These items are available for review at any time.

July 2000/ March 2001 D.C. International Inc.
Lafayette, La.
Supervisor: Mitch Leblanc

Employed as a Safety, Environmental, Regulatory Compliance Specialist
On subcontract to Chevron U.S.A. with job duties commensurate with job title. This position was formed by Chevron as a pilot program to alleviate job hazards in a drilling environment. While filling this position I have been responsible for complete development of the program to include a system of checks and balances, reporting procedures, on-site required documentation, perform safety and compliance audits and reporting of the same to corporate support personnel. While on the job site it is also my responsibility to monitor all aspects of the operation and alleviate all job hazards as well as monitor the operation for possible violations of the NPDES Discharge permits and MMS, U.S.C.G. and OSHA rules and regulations. Monitor subcontractors to ensure they full fill the requirements of the contract and assist them with any issues that are found to be below acceptable standards. These standards include such items as Job Safety Analysis and work procedures, acceptance of critical components items and third party personnel and equipment, training requirements, Short Service Employee programs and Behavior Based Safety Programs.

01/01/00 – 07/04/00 STARS Safety Training and Regulatory Services
3660 Lormand Road
Maurice, La. 70555

Employed as a Safety Compliance Specialist. Job duties include Training of personnel in all aspects of OSHA and MMS compliance issues as well as assisting clients with safety audits and safety compliance issues.

11/1991- 11/99 The Production Enhancement Corporation
P.O. Box 926
Broussard, Louisiana 70518
Reported To: Owner and C.E.O. Bryan Sonnier

Last Position was as the Safety Manager/Quality Assurance Manager.
While in this position I was instrumental in acquiring the ISO 9002 registration for one company as well as wrote and implemented the program for three additional companies. Put into place a safety and training program which included writing an Environmental Safety and Health Training Manual as well as a Safety Manual. These programs where developed along the lines of the ISO 14001 guidelines for future registration.

As the Safety Director it was my responsibility to coordinate and perform training of laboratory and field personnel in a manner which precluded no reduction of productivity at a minimal of expense. Training included New Personnel Orientation, Fire Safety, Respiratory Protection, Hydrogen Sulfide, Office Ergonomics, Back Safety, Hand, Wrist and Finger Safety, Chemical Hygiene, Personal Protective Equipment, Eye Safety, Small Tool Safety, Hearing Protection, LockOut/TagOut, Confined Space Entry, Compressed Gas Cylinders, General Housekeeping, Electrical Safety, Fall Protection, Heat Stress, First Aid, Bloodborne Pathogens and CPR, Environmental Assessment, Hazard Assessment, Hazard Communication Right To Know, Handling and Transporting Hazardous Materials (HM126), Cranes, Rigging and Forklift Safety, PEC Offshore Orientation and Petrochemical Safety, Slips, Trips and Falls, Hazwoper Awareness. Sampling and Sample Handling of high pressure gas and oil samples.

Perform Safety Audits of the facility and report to management, maintain all safety and training files on personnel as well as maintain all records of hazardous waste activities.

Maintain and report all required documentation for OSHA to include annual OSHA 300 Logs and complete all questionnaire's for client requested information pertaining to Master Service Agreements and Contracts. Review same for compliance issues. Develop and initiate safety and environmental impact assessments and performance reviews to remain in compliance with MSA and Contracts. Provide Hazards Assessments of all operations and mitigation events to provide for a safe working environment.

It was also my responsibility to monitor the Drug Screening Program to ensure all pre-access and random screening was performed and to initiate and report findings of all accident investigations.

The last three years there were no reportable OSHA incidents within the corporation.

As the Quality Assurance Manager, it was my responsibility to monitor and record all data necessary to remain in compliance with the ISO 9002 program to include tracking and reporting all non-conformance reports, corrective actions and out of compliance conditions. Maintain a master list of all calibration, Maintain all measurement and test equipment used for calibrations, Establish calibration schedules and notify departments of pending out of calibration conditions, training of quality control personnel performing quality control functions as well as calibrate equipment when needed. Perform Quality Audits and report results to interdepartmental managers and corporate management, establish quality audit schedules. Perform all scheduled reviews of the Quality Management System and Report findings to Corporate Management.

As the Quality Assurance Manager I wrote and implemented a Quality Assurance Plan for the corporation that eventually helped us to obtain ISO 9002 registration. This program included all aspects of Quality Control from Hold and Testing Points to Process Control and Final Reporting, Calibration of Equipment and Maintaining Test and Measurement Equipment as well as maintaining required files and documentation.

Previous Job duties within the corporation included laboratory manager chromatography lab. This is where I began with the corporation while in this position I was able to re-equip the lab and increase productivity four fold. I trained all chromatography personnel in proper laboratory procedures, provided the knowledge necessary for proper application of chromatographic plumbing for various applications and performed troubleshooting and maintenance of chromatographic equipment. I initiated, designed, and implemented an ASTM physical properties lab as well as a basic water lab and trained personnel to operate this equipment and perform analysis with little supervision. Maintained all records and files for Quality issues and conducted all audits for Quality and Safety both in-house as well as customer required. I also initiated, designed, built and implemented a portable laboratory service. This service is now serving the industry throughout the world with locations in Russia, Angola, and Trinidad. This service includes the sampling and analysis of oil and gas samples as well as reservoir fluid sampling using downhole sampling tools. At this time the company grew from 12 employee's to 80. A joint decision was made between myself and the owner for me to turn my daily lab duties over to other personnel to give me more time to dedicate to Quality and Safety and Training Issues. This was not a demotion but a lateral transfer to relieve me of to great of a work load. A manager was hired to take over my lab duties and an in-house promotion of personnel was conducted to place a manager over the portable laboratory service.

Reason for Departure: Downsizing Corporation due to loss of business revenue's and increased competition.

Previous Employment: 1981-1991
Southern Petroleum Laboratories
Lafayette, Louisiana

While with this company I worked as a laboratory Technician with duties consistent with this position. These duties included field sampling of Oil, Gas, Water, Air and soil samples for compliance testing, air quality as well as accountability for volume and BTU values. Duties also duties included ASTM physical properties testing as well as gas chromatography where I performed all chromatographic analysis, troubleshooting, maintenance and calibrations. I maintained and operated a portable laboratory which I used throughout the southern regions of the United States and Offshore for on-site analytical services. Analysis included air monitoring, sulfur content, & BTU values locations associated with this sampling and analytical work included such varied area's as production platforms, drilling locations, sulfur recovery plants, landfills, fire investigations of building fires, propane and NGL plants. Maintained all required records and provided all data needed for Quality Related Audits. Assisted with Quality Audits by Clients.

1972-1981
U.S. Army
My last duty assignment was at Fort Hood Texas where I was in charge of the Base Petroleum Laboratory. My primary military occupational specialty was list as a 92C petroleum laboratory technician with a secondary MOS as a 76Y supply. My duties included all aspects of managing and operating the laboratory to include training of personnel. This laboratory was considered a Quality Control laboratory that analyzed samples of all fuels, hydraulic oils and lubricants purchased from private refineries for use at the installation. The analysis performed ensured compliance with purchase specifications. While in this position I implemented a training program that was still in use as late as 1995. This program included a system of test and evaluation of technicians on a weekly basis. Army wide testing of all personnel in this field conducted in 1980, the last year I in this position revealed the technicians under my direct supervision scored highest of all with scores exceeding the 93 percentile three of which were the three highest army wide scores. The average army wide scores were in the 80 percentile range. 9 years military experience, 8 active army with 1 year reserve duty, with courses in leadership, training, supply, first aid, Air assault and marksmanship.

1968 Through 11/72 Blissett Brothers Construction
Started with Blissett Brothers Construction as a general laborer in the apartment and residential building industry. While with this company I filled various positions for the completion of building projects from preparing the land as a heavy equipment operator using such equipment as tractors, backhoe's, bulldozers and dump trucks, preparing and pouring the concrete foundations, framing, roofing, finishing the interior, electrical helper plumbing helper and painter. I also worked as a paint crew foreman as well as a landscape foreman.
Reason for Departure: Joined the Army

Personal Data:
I am currently married with 3 children and 3 step children all of which are grown and out of the household.
I currently own my residence in Maurice Louisiana
Hobbies include fishing, hunting, horseback riding and carpentry
Born on December 7, 1954 in Dothan Alabama where I remained until joining the service in 1972. I am willing to relocate if required.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1151 to 1200 of 4805)

Go to Search Parameters...

Brief Description

A DIPLOMA IN MECHANICAL ENGINEER HAVING 20 YEARS EXPERIENCE IN CONSTRUCTION FOR VARIOUS INDUSTRIES LIKE CROSS COUNTRY PIPELINE, CEMENT, CHEMICAL, FERTILISER, POWER, ETC., PRESENTLY FOR THE PAST 7 YEARS WORKING AS A DY. MANAGER (CONSTRUCTION) WITH SIMON INDIA LIMITED, INDIA.

Truck driver

June 2003 ©¦EPresent Company: JGC Corp Location: China Position : Schedule Controller May 2002 ¨C March 2003 Company: FAFCO Location: Saudi Arabia Position : Planning & Scheduling Engineer

A professionally qualified Engineering Project Manager, with a total commitment to excellent performance, combining experience that encompasses a broad range of technical and management skills well as practical, ‘hands-on’ involvement.

Seeking a Operation Manager position. Offer extensive hands-on and supervisory experience in multimillion-dollar commercial projects within the construction industry."

I have 20+ years as a Welder. I have numerous certifications in Welding Procedures. I am willing to relocate and/or travel.

20+ years in EPC heavy/industrial. Sharpest skills in resource & time control. Expert Planner/Scheduler w/Primavera P3, P3e Teamplay etc. software, 14 years experience (superuser & administrator). Capable Cost Engineer & Good communicator.

Registered California architect with 14 years construction management experience acting as owner representative for governmental agencies managing the design and the construction of various types of facilities.

Enriching a company in the Mid-Atlantic building products market.

Moving to Georgia Thomaston Area need work.. by 4/01/04

35 continuous years of national and international commercial construction experience

The resume summary is included in the resume.

I am very experienced and have worked at all levels worldwide and also worked with many nationalities. I work very hard and get on well with everybody.

Mechanical & Electrical Engineer Location East London, Essex, Kent, Greater London Salary To £30,000 plus package

Safety Manager seeking position

Crane Operator

Civil Engineer with solid background in structural design, experience working with oil companies. Project supervision experience, costing and evaluation. Vast field experience leading working crews and supervising jobs. Good communications skills. Multilingual, speaking Spanish, French and Italian.

Experienced in power plant operations and startup.

international c.v.

Mining Engineer and Geologist with twenty-seven years’ experience in precious and base metals, coal and industrial minerals. Professional Engineering licenses in three states, with unique construction and engineering achievements. Advanced technical and strong supervisory skills.

Work Experiences : Mechanical equipment and piping installation in the following industrial plants: 1) Natural gas plant 2)Power plant 3)Polypropylene plant 4) Oil Refinery 5)Desalination plant 6)Steel mill 7)Foundry plant(maintenance of mechanical equipment)

I have been working in construction industry for Oil & Petrochemical Plant for decades. I work well under pressure and very keen on project planning and management. I am confident in leading a team of sub-contractors in performing sophisticatedly for any petrochemical processing plant.

NACE Certified Coating Inspector #7278, with +20 years of experience, available as (3rd party) Q.A./Q.C. coating inspector, coating surveyor, coating supervisor, vendor surveillance, etc.

I have been working in the Construction Industry for 40 years at all levels up to Construction Manager. I have extensive experience overseas including Africa and Asia. I am looking for similar work and am prepared to work anywhere at immediate notice.

23 years experience in the Electrical Distribution/Electrical Contractor Industry. Wish to acquire a part time or full time position in an office or job site environment.

Job objective: General Supervisor, Field Supervisor, Project Manager or Assistant Project Manager. Interested in overseas opportunities.

Looking for a new challenge at the end of 2003 my present contract end then

C/C++/ VB / SCADA / Electronic / Embedded / Automation / Systems Engineering

I completed my degree in Electrical Engineering and had taken and passed the highest National Examination in The Philippines, Professional Electrical Engineers Examinations in 1986. I have a good experience in Oil and Gas, Controls, Fire and Gas Systems, Design, Detailed Autocad Drafting(Isometric),

Erection, Commissioning field instruments & Systems

Over 23 yrs of heavy earth field mechanic. AAS in Heavy equipment and diesel Technology. Lack final semester for BA in Training Industry & Business. CAT and Kamatsu trained.

AutoCAD, PDS (3-D modeling). Lead engineer of erection department

Ex-Pat experience in international Supply Chain, Logistics, Process, and Project Management

Diploma general nursing (midwifery,community nursing,psychiatry),Diploma in occupational health nursing,SAMTRAC

Safety or hse officer,4.5yrs exp

Document Controller, Planning Assistant, Admin Assistant

Instrument engineer with around 15 yrs of versatile experience in the field of installation,commissioning , operation amd maintenance.

Civil engineer from India , Now i am working in oman since 2007 , feb . I want a site engineers jobs in australia .For that i need employer sponsored visa.

Riview contract, Claim of insurance, Invoicing , Claim od additional and variation works, Count the Quantity progress.

I can offer extensive supervisory experience in the oil and gas industry,

Electrical engineering on EPC projects, analyses of power distribution grid, FEED design of power distribution and power generation systems, detail design of power distribution in hazardous and non hazardous areas, technical coordination of subcontractors and procurement on projects, site supervisi

Over 25 years of diverse and successful experience in material control in areas including: Nuclear/Coal Power Generation, Bulk Handling & Storage, Co-generation, Commercial Maintenance, Oil Refinery, Warehouse/Distribution, Shutdown/Turnaround and Outages.

Experience in all phases of material management & expediting, design office & engineering & project coordination. Experience in heavy construction including offshore oil platforms & related facilities, nuclear fuelled power plants, paper mill, chemical plant & overseas military facilities.

I am a Graduate Mechanical Engineer and have good proficiency in Computers. I have put in 13 years of hard work in Construction of Oil & Gas Pipelines, which has given me exposure in all fields like Project Management, Planning, Tendering, Cost Estimation and Control, Execution.

Geodesist/Land Surveyor/Geomatics/GIS consultant

Project Manager with over 35 years of experience in the construction industry, which offers an extensive and diversified array of industries such as power generation, pharmaceutical, semiconductor, large office facilities, pulp/paper and plastic projects, coal gasification and others.

Highly motivated and results-oriented professional with exceptional leadership and interpersonal skills with an extensive background in construction industry.

A competent Chartered Mechanical Engineer with over 14 years experience, gained in Aluminium, Iron & Steel, Nuclear & Petrochemical Industries. Worked in areas of Design, Construction, Installation, Projects, Commissioning, Overhead Cranes and SAP.

Piping/Mechanical Superintendent

System Admin for IT Industry.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 [ 24 ] 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out