Resume - I have over ten years in the asphalt plant field. I am willing to relocate to ju...

Misco Jobs

Resume #4563

CONTACT INFORMATION:
View contact information...

SUMMARY
I am an energetic, quick learning, and hard working individual. I strongly believe in professionalism at the workplace, as well as the need for teamwork, safety, and good communication. Being around asphalt plants most of my adult life, I have become well orientated in the operation and maintenance required to produce an efficient, productive and safe plant site.

WORK HISTORY
1999-10-2004 Plant Foreman - Operator, Elam Construction
Grand Junction, CO

In my most recent position, I was responsible for the day to day operations of a Cedarapids 400 tph counter-flow asphalt plant with Modicon controls. Duties included operation and maintenance of the plant, as well as overseeing and coordinating a three man crew, and mobilization/setup of the plant. This plant was the highway plant responsible for all of the larger CDOT jobs. Prior to the Modicon, I had previously been responsible for an older plant, so I am also very familiar with the WEM 3006 controls.

1994-1999 Laborer - Operator - Forman, Granite Construction
Dallas, TX

I started as a laborer and quickly worked my way up to the Forman position. As a Forman I learned the importance of good communication and safety. I was responsible for the maintenance and operation of a 600 tph Cedarapids parallel-flow asphalt plant.

EDUCATION
1993 Computer Information Systems, Richland Community College - Dallas, TX
1992 Certificate of High School Equivalency - State of Texas

* LICENSES & CERTIFICATES
Certificate of Completion - CEI Firebox Heater Seminar, CEI - 2003
Certificate of Achievement - Asphalt Plant Operation Workshop, Clarence Richard Company - 2001
Certificate of Achievement - HMA Facility Operations Training Program, NAPA - 2000
Certificate of Achievement - Air Pollution Control Maintenance, BHA Group - 2000
Certificate of Training - HMA Service School, Cedarapids - 2000
Certificate of Training - Impulse I, CMI Corporation - 1999
Certificate of Training - Asphalt Plant Maintenance Systems, CMI Corporation - 1999
License - Certified Weigher - Department of Agriculture, CO -1999

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2201 to 2250 of 4460)

Go to Search Parameters...

Brief Description

Bridge Design / Bridge Management Sysytem

An electrical engineer, having 4 years of experience in high voltage side and have got testing and commissioning,design and maintenance experience. i am an indian and would like to get an oppertunity in reputed companies.

About 9 years+ experience in cement industry in mechanical maintenance (preventive, predective and corrective maintenance, compterised maintenance system), worked as section incharge for mills,Kiln, energy conservation, costing techniques.

Greetings, I'm available to provide survey services. I'm experienced in "base camp" situations and logistics.

10 plus years in construction from heavy civil, to residential. MAinlt bridge and highway building

Geotechnical Engineer

I have recently finished my undergraduate study in Mechanical Engineering, Institute Technology of Bandung, Indonesia. I am looking forward to having a career which has strong relation with my educational background.

I have over ten years in the asphalt plant field. I am willing to relocate to just about anywhere in the world for the right job

Company Accountant with ten years experience including chartered accounting, manufacturing and construction including three years experience in Papua New Guinea. Looking for another "expatriate" company accountant position. Available March 2004.

Working in the Kingdom of Saudi Arabia for the last 9 1/2 years. Well experienced in the design and execution of all types of HVAC systems, plumbing systems including water supply, Sewage/drainage system and Fire fighting system.

Results-oriented, Construction site Engineer with 7 years of experience in all facets of the Industry. Verifiable track record for successful completion of many projects.

I understand from your advertisement that there are openings in reputed company for various posts with challenging responsibilities. I have special interests in QA/QC and wish to offer my services as QA/QC Manager/ Supervisor.

Quantity Surveyor For Aluminium Facade Work

Civil / Structure Engineer with expertise in Structure and infrastructures for transportation, industrial / petrochemical and mining projects, also has capability in offshore structure design.

Professional, leader, self-starter, team player, integrating diverse experiences and skills. Quick Books Pro, Microsoft Works, Microsoft Excel, Microsoft Word, Microsoft Power Point, Microsoft Internet Explorer

Master in Machine Design engg with 6+ Yrs of Exp in design,Developement & Reverse engg of machine elements and Design Support for Onsite clients.

Skilled technical SalesProfessional with International business Development experience in over 17 countries

Caterpillar Dealership, Surface and Undergound Mining Experience.

a qualified welding qa/qc inspector please have no doubt to review my information and ability cause i always do everything to the best of my ability and i am available as soon as possible please contact me via e mail ill be awaiting thanks

My objective is to acquire my Associates degree in Engineering Designing Graphics, learn marketable skills, and to utilize these skills in this field. These skills would include designing new homes and reconstructing commercial buildings.

Being in one of the best Civil Engineering School in France (ESTP School), I believe my two years experience/education in Civil Engineering, coupled with my drive and enthusiasm, would enable me to make a significant contribution to your company.

Qualified Electrician- experience with pneumatics, air conditioning,smoke ventillation,contract plumbing, security and fire alarms,data wiring in domestic,commercial and industrial settings.

Heavy Plant Operator such as loader, mobile crane, excavator, jcb etc

Computer Aided Drafting.

I have worked as a project manager on large job sites particularly in the areas of waterproofing and roofing. I have experience managing large and multi-cultural crews under high stress and hard deadlines.

Spie-capac-Petrofac international limited JV (AGT Azerbaijan Georgia Turkey) oil and gas pipeline project (Tbilisi, Georgia). Position: HSE Trainer

Experienced Mechanic, Have a wide range of experince from small engine to large diesel.I have a comercial drivers license and current DOT physical. Licensed Classes ABCD. Endorsements Hazmat, tanker, doubles and triples. I am also an experienced driver.

Structural Designer / Draftsman

I hold a Bachelor of Science degree in civil engineering and have over 8 years experience in the design of concrete and steel structures.

3+yrs exp in qa/qc in highway engineering (roadworks)

HYDRAULIC MECHANIC

Quality Assurance/Quality Control COORDINATOR for Oil & Gas Projects (Pipelines, Tanks, In-Plant Piping, Pumps & Compressors Installation)

Seeking full time employment with a construction company who is need of a Loader Operator. Doesn't matter where I'm willing to move.

Looking for a plumbing position overseas

I am ambitious, hard working, challenge orientated and enjoy problem solving. I am able to work within a group or by myself.

Working as a Project Engineer since 1992.

My functional areas of expertise include process improvement, risk management, regulatory compliance, accident reduction and claim investigation. In addition, I directed programs for Workers’ Compensation, EHS and DEP, ensuring compliance with State and Federal guidelines.

Electrician

NDT/QC UT Level III, prior RT/MT/PT/VT Level III. 25+ years experience in inspection in power, oiland gas and construction

Skilled Rigger and Crane Operator specializing in structual steel and installation of industrial machinery seeking challenging work 3 Years experience

Cisco Routers, TCP/IP, Extreme Networks, Netscreen, Solaris TCP/IP Networking, HP Openview Network Node Manager, Solaris 8 Administration, Windows 2000 Server and Advanced Server Administration.

3.5 years experience Mechanical or Piping Engineer, experience in drafting, estimation, construction at power plant, high risk building, cement plant.

Sr Structural Designer / PDS FrameWorks Coordinator and project set up.

10 years experience in EPC company. Good interpersonal and communication skills, experienced as a Lead Process Engineer, HAZOP member and Field Engineer, advanced ability in value engineering, P&ID, PFD, process simulation, feasibility/conseptual study and other detail engineering

Very experienced in systems / instrument commissioning / maintenance

Qualified Electrian in UK, Worked in Petro-Chemical Industry, Supervisor, Electrical Consultant for large Bank

CISRS Registered Advanced Scaffolder, CITB Registered Advanced Scaffolder, Brunei Shell Worksite Supervisor Cert, CITB Inspection Cert, ECITB Passport to Safety.

Strong background including contracts administration, project management, staff training and development, contract negotiation, subcontractor management, safety, quality assurance, report preparation, and client relations.

Strong background in many areas including contracts administration, project management, staff training and development, contract negotiation, subcontractor management, meetings coordination, quality assurance, report preparation, and client relations.

Heavy equipment mechanic

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 [ 45 ] 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out