Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #46370 next resume »»
CONTACT INFORMATION:
View contact information...

OBJECTIVES:
1. To render quality service to the company that I may be a contributory factor in achieving the company's objectives.
2. To be a part of a dynamic company that continuously enhance, facilitate and utilize skills abilities that a person possesses.

WORK EXPERIENCE:

STEEL SYSTEMS ENGINEERING PHILIPPINES CONSULTANCY, INC.
161 Lakeview Drive Kawilihan Village
Rima Bldg., Bagong Ilog, Pasig City
May 2, 2000 to Present

Main Office:
STEEL SYSTEMS ENGINEERING, INC.
4340 Fulton Avenue, 3/F
Sherman Oaks, California 91423

Position: Steel Detailer – Checker

JOB SUMMARY:
1. Interprets and analyses given architectural drawings, structural drawings and fabricator detailing standards and special instructions.
2. Makes request for information (RFI) for clarification and additional information if there are conflict on the given design drawing.
3. Prepares the following:
a. Anchor bolt plan and details such as bolt details, templates, embed plates and other steel shapes embedded.
b. Erection plans c. Shop drawings of structural steel d. Material take-off / Advance material list e. Field weld details f. Lay-out drawings necessary for fit checking
4. Coordinates the project with the project manager to the main office.
5. Quality control

PROJECTS PARTICIPATED: FABRICATOR

* FRESNO TRAUMA CRITICAL CARE CENTER MAYA STEEL FABRICATIONS, INC.
Fresno, California 93721

* CONSTELLATION PLACE THE HERRICK CORP.
Century City, California

* BUENA PARK CITY HALL MAYA STEEL FABRICATIONS, INC.
6650 Beach Blvd., Buena Park, California 90621

* DELANO STATE PRISON II MAYA STEEL FABRICATIONS, INC.
2737 West Cecil Ave., Delano Kern County, California

* DPSS & DCFS NORTH TOWER SME INDUSTRIES INC.
Sonnenblick-Del Rio, El Monte, California

* UNIVERSITY OF CALIFORNIA SME INDUSTRIES INC.
Institute of Telecommunications and Info. Technology
San Diego, California 92093

* ILLINOIS STATE UNIVERSITY UNITED STEEL FABRICATIONS INC.
College of Business Bldg.
Chicago, Illinois

* MORONGO THE HERRICK CORP.
Banning, California

* THE PALACE INDIAN GAMING CENTER SME INDUSTRIES INC.
Casino South
Lemoore, California

* INTERMOUNTAIN HEALTH CARE SME INDUSTRIES INC.
Intermountain Medical Center
Murray, Utah 84123

* OLIVE PIERCE MIDDLE SCHOOL CLARK STEEL FABRICATORS INC.
1521 Hanson, Lane, Ramona, California 92065

* THE VENETIAN PHANTOM THEATER SME INDUSTRIES INC.
3355 Las Vegas Blvd., South
Las Vegas, Nevada 89109

* DISTRICT AT GREEN VALLEY SOUTHWEST STEEL
American Nevada Corporation
Henderson, Nevada

TECHNICAL SKILLS
Basic knowledge in Microsoft Word, Excel, IntelliCAD and AutoCAD with 3D applications.

LICENSURE EXAMINATION
Civil Engineering Examinations
November 13-14, 1999

EDUCATIONAL ATTAINMENT
College
Bachelor of Science in Civil Engineering
Bulacan State University
Malolos City
1994 – 1999

High School
Paombong High School
Paombong, Bulacan
1990 – 1994

Elementary
St. Martin de Porres Catholic School
Sto. Niño, Paombong, Bulacan
1984 – 1990

ORGANIZATION:
1998 – 1999
Member, PICE – BSU Student Chapter
Bulacan State University
Malolos City

CHARACTER REFERENCE:
* Available upon request

View contact information...
«« previous resume next resume »»
Search Results (Resumes 1501 to 1550 of 4363)Go to Search Parameters...
Brief Description
Planning/scheduling, progress monitoring, procurement of project material, site coordination, progress reports and site co-ordination
QA/QC Engineer/Inspector
Proficient in AutoCAD with 3D applications, Basic knowledge in Microsoft Word, Excel, IntelliCAD.
Experienced Industrial Structural Engineer - concrete, steel - 20+ years, UK & US codes
detailed engineering/design of offshore rigs and ships
Ability to manage multi projects and organize all procedures on and off sites to ensure the projects are completed on time and within the budget.
KEY RESPONSIBILITIES :1. Transmission engineering in designing backbone links,2. Transmission network design, link budgeting for transmission links,4. Planning of STM-1 Ring Network in City and Backbone to have a Reliable Network with a uptime of 99.99%,6. Microwave Projections for the additional Si
Landscape Arch with varied experience of the micro and macro level design and execution of private and govt. projects
•experience performing detailed design calculations for heat transfer systems, pressure vessels
20 years in the construction industry ranging in the welding field of building food processing plants,to oil field industries,Commercial diving opperations I also aplied my knowledge toward the osha programs as a Safety Specialist started work with the Navel Stations with contract for the Navy.
50k to 100k US per Year
I have done my M.S.(Control System Engineering) from Texas A&M University-Kingsville with G.P.A as 3.9 /4.0. I am looking for a job of control System Engineer. I have work experience of 1 year and 4 months. I am willing to relocate anywhere in USA. Thanks Rajesh
OBJECTIVE Find a rewarding position, which both recognizes and rewards performance. A place where someone is able to establish their skills and be capable of learning at the same time.
Security Technician
15 years of experience in repairs and maintenance to construction plant and machinery and 10 years at supervision/managerial level Plant predominantly Caterpillar
Applying my educational experience into real life. I am particularly interested in an executive mid career position in a multi national or a well-established organization.
i am a post graduate mechanical engineer with 8-9 years of working experience in HVAC field in international environment. can lead a team of supervisors and subcontractors. knowledgeable in working. presently working with the Italian M & E contracting company (elektrint limited in Nigeria.)
Supply Chain & e-Business Management professional having 9+ years multinational experience.
Skills: Contract Negotiation, Quantity Surveying, Project Handling & Project Implementation, Quality Control, Co-ordination with various agencies involved in project
I was responsible for the daily operations of the project’s office and assist both mechanical and electrical engineers in the billing and change order process, Purchasing, preparing reports and supervising.
Experience in quantity surveying, site supervision, planning, designing over water and over land structures.
I am a Naval Architect and Marine Engineer whom objective is to provide engineering solution in a merit driven environment with an opportunity for career development to face present and future challenges.
Looking for a position with an established engineering company, utilizing previously learned skills
I am a Mechanical engineering diploma holder, over 15 years of experience with CSWIP Plant Inspector, CSWIP 3.2, AWS CWI and ASNT LEVEL II in RT, UT & MT, with valid UAE driving license.
A progressive individual with a record of excellence in the management of people, responsibly overseeing compliance of project specifications, and supervising completion of substantial commercial industrial construction projects.
is a supply professional in mining and construction. He has a proven track record of fulfilling all facets of procurement, material handling and inventory procedures.
EXPERIENCE PROFILE (7 YEARS)
I am a Full Member of International Institute of Risk and Safety Management (MIIRSM) and Technician member of Institute of Occupational Safety and Health (Tech IOSH) .Have expertise in working in ISO-9001, IS0-14001 and OSHAS 18001 environments.
MEP Manager with 14 years of int'l exp. in construction. Verify design, construct and commission. Executed prestigious & high rise buildings project which MEP works value in excess of US$380 M. Supervise and coordinate work acc. to contract ,budget, time, co. procedures & ensure client satisfaction.
site engineer for a land development project that covered earthworks and HE utilization, roadworks, driange, waterline and housing projects on mass housing and medium scale units
i have passed Degree(B.E.) in mechanical engineering with spl. in welding technology and now i am working as a welding engineer in boiler making company from 2 and half year. my job profile is making WPS,WPQ,PQR, TDC, and shop floor inspection.
i am 25 and in sydney on a 12 month visa im from England,i have a NVQ level 2 in bricklaying and concreting i have 5 years experience.
MECHANICAL ENGINEER WITH EXPERIENCE IN DESIGNING
VP metallurgist with MBA. Extensive experience with 20+ years experience in manufacturing and operations, working in the USA, Canada, and Australia.
Scaffolding. Superintendant,Supervisor,Inspector,Instructor
AWS, Certified Welding Inspector / Welder
Nace level 3 coating inspector, CINI certified insualtion inspector & Chartek certified fireproofing inspector.
Contracts Manager; Procurement Manager; Subcontracts Administrator; Contract Administrator; EPC oil & gas downstream construction.
A proven Boiler Maker/ Combination Welder highly skilled in the areas of aluminum, ferrous and non-ferrous(CS, SS), exotics(Alloys), and next generation metals. Qualified under ABS, AWS, ASME, NAVSEA and Mil-Standard 248 to do all plate and pipe welding on non-nuclear systems.
A Certified Human Resources Professional with practical and progressive experiencein Africa, Central America, Canada, USA, Central Asia and the Asia-Pacific region.
A Wide experience in drafting in major of civil works, structural, mechanical, Piping & Instrumentation and architectural drawings, 8 years of overseas experience,Overall 15 Years of working experience in civil, structural, mechanical, piping, and architectural firms
More than 13 years post qualification experience out of which 7 years in Occupational Safety and Health, (4.5 years in oil and gas sector) interested in the development of modern techniques in the construction and oil field industry
Welding all rod types: M.I.G., T.I.G, all plastics, oxyacertylene. Equipment repair and maintenance of all machinery for use in metal working shears, brakes, manual cutting, machine cutting. All machine shop equipment, lathers, radial arm, drill presses, and iron works.
Electrical Engineer ( project & design) with more than13 years of experience with MNC in India, Japan , Middle East for Oil and Gas, Petrochemical, Chemical, Power.
PROFILE: Proficient in shuttering works, Steel reinforcement & fabrication, pipe fittings
I am a Senior Planner/ Project Controller with certified versatile capabilities and experiences in different fields of construction, including, but not limited to, Building construction, massive civil work, industrial construction, petrochemical construction, commercial complex and high rise buildin
Administrative, Sales, Strong Customer Service
15 years Accounting / Administrative experience in Australia. Currently visiting South Africa but ready to move on and explore more of the world.
Extensive management, administrative, financial and contractual experience.
To secure a position with a progressive firm utilizing my diversified material management capabilities.
First   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   [ 31 ]   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help
» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email
» My Account
» Log In
» Log Out
 
©1999-2008 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com