Resume - PDMS-11.6, PDS-7.1, Autocad-2006, CAEPIPE 5.11, Pro-E Wildfire2.0

Misco Jobs

Resume #46626

CONTACT INFORMATION:
View contact information...

CAREER OBJECTIVE
Seeking an opportunity and a challenging role in an innovative and growing organization, which can utilize my skills and motivate me to perform and deliver outstanding results while enhancing my own skills.

PROFESSIONAL EXPERIENCE
Working as Project Assistant in Bharat Heavy Electricals Limited, Hyderabad since July 2006 in Power Plant Engineering Department.

KEY SKILLS & KNOWLEDGE
Preparation of Piping layout, Isometrics, Bill of Materials, Equipment layout, Auxiliary Equipment Foundation, Stress analysis, Support layout, Hanger Schedule, Plate inserts and Openings.

Knowledge on P & ID like Steam flow, Condensate flow, Lube oil, Governing scheme and Pipe Size Calculations for above services.

Piping Engg Tools:

PDMS 11.6
PDS 7.1
Auto-CAD 2006
CAEPIPE 5.11

PROJECTS:
Details of Projects Executed as a Project Assistant in BHEL are outlined below:

Project#1 - 25MW STG to ACC at Lakheri Rajasthan

Tools: PDMS 11.6, Auto Cad 2006, CAEPIPE5.11
Team size: 2

Involvement

Engineering of Mechanical Equipment Layout
Preparation of Piping Isometrics
Estimation of Piping Bill of Material
Support layout & Hanger Schedule
Plate inserts & openings

Project#2- 25MW STG to ACC at Kymore Madhya Pradesh

Tools: PDMS 11.6, Auto Cad 2006, CAEPIPE5.11
Team size: 2

Involvement:

Engineering of Mechanical Equipment Layout
Engineering of Auxiliary Equipment Foundation
Equipment Modeling
Engineering of Piping Layout
Preparation of Piping Isometrics
Preparation of Piping Bill of Material
Stress analysis
Support layout & Hanger Schedule
Plate inserts & Openings
Pipe Size Calculations

Project#3 - 16MW STG set to Century Pulp and Paper LTD. Nainital, Uttaranchal

Tools: AutoCad 2006, CAEPIPE5.11
Team size: 2

Involvement:
Engineering of Piping Layout
Preparation of Piping Isometrics
Estimation of Piping Bill of Material
Stress analysis
Support layout & Hanger Schedule
Plate inserts & Openings

ACADEMIC PROFILE:
Bachelors Degree in Mechanical Engineering with 60%, from JNT University.
Intermediate with 74%
10th with 73%

PAPERS PRESENTED DURING GRADUATION
1) Made a National level presentation on Squeeze Casting of Aluminium in Vignan Institute of Technology & Science
2) Made a paper on Duel Fuel Diesel Engine With Pilot Valve Injection System in
Sree Nidhi Institute of Science & Technology.
3) Made a detail study on Steam Turbine Assembly and its Governing system at
Bharat Heavy Electricals Limited.

STRENGTHS:
Commitment and determination towards work
Ability to learn new technologies and concepts
Excellent interpersonal Communication skills
Effective team member

LANGUAGES KNOWN: English, Hindi and Telugu

REFERENCES:
Upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 4201 to 4250 of 4814)

Go to Search Parameters...

Brief Description

maintaining and operating various types of heavy equipment in the forest industry, building industrial roads, road deactivation

Proven GIS Specialist, Project Manager and Dynamic Force for the Successful Implementation and Transformation of GIS Standards and Systems

Currently working as a procurement engineer in an Engineering Firm in Tokyo Japan engaged in EPC contract works for Petrochemical Plants with minimum 3 years experience

Talented and value driven professional with 9+ years of experience in health, safety, environmental and quality management. Motivated by challenge and rewarded through key initiatives that aid continuous improvement, as well as profitability and productivity.

Eight (8) years experience as heavy equipment operator local and overseas

My technical specialty lies in installation, troubleshooting and repairing Electrical, Mechanical, Automation production problems. I can install conduit, cable tray, main panels, and sub-panels, distribution transformers, ground systems and, wide variety electro-mechanical devices

Safety Professional with over 25 years experience and dedication to the industries with a Safety first and foremost attitude.

Masters Degree in Chemical Engineering

Expert in alingment of all kinds of equipment

10 years Auto cad work experience with Design & Drafting background in the field of Fabrication structures, Sheet metal, Conveyors and Material Handling systems

Contracts Engineer

3 years of safety experience and seeking more.

Project Engineer Automation Controls Instrumentation PMP Certified 9+Years exp Plant Automation PLC SCADA DCS Project Manager CAP

Journeyed Industrial Electrician

NEBOSH Certified HSE advisor, HSE Trainer, Tech-IOSH member

Interested in Industrial Instrumentation Mechanic Apprentice Position: Currently have the following safety courses: H2S Alive, CSTS, First Aid, Confined Space and High Angle training, WHMIS, Firefighting Technical Certificate.

Capable working with minimum supervision as solids control and drilling waste management eng, Mechanical skill, computer and management.

Experienced Electrical Superintendent seeking employment within the Australian construction industry, where hopefully my varied knowledge and experience can make a positive contribution to any prospective employers and also where I can continue to further develop myself within the business.

Project Engineer wit BSc of Chemical Engineering and experiences in oil and gas

Looking for senior level assignments in Project Management & Business Development, Health & Safety Management, Human Resources, Learning & Development and Business Startup.

M.Eng graduate engineer, over 6 years international experience in contract management / procurement and project controls for multi disciplinary oil / gas / LNG projects in Asia and Africa, with contractors and operators

Very good knowdledge in computeers and networking field. Good experience as Document Controller in Oil/Mechanical construction field.

Perform concurrent duties of a project manager which involve the management of several Aramco and non Aramco projects in close coordination with the client and/or his representatives and with the engineering design team

Mechanical Engineer with proficiency in IDEAS, Nastran

A dynamic accomplished Information Technology Professional with unique combination of experience in Networking and Hardware. Strong Analytical, Organizational and problem solving skills. Ability to identify Operational Deficiencies, skilled in applying Technology and Administration practices to impr

Mechanical engineering finite element analysis composites ansys Master's

Business Administrator with MBA from Oxford, UK

MWD, drilling, construction

Time served pipefitter with 12 years experience.

PLANNER SMELTER

Very good exp on Document MAnagement, Administration and Trouble shooting.

I completed my Master in Business Administration, and have more than eight years working experience in the mining industry.

PDMS-11.6, PDS-7.1, Autocad-2006, CAEPIPE 5.11, Pro-E Wildfire2.0

E&I Materials Coordinator

Quantity measurement by SMM7 in my spreadsheet program, BoQ maker, also Project Monitoring in Quantity and Costing.

Experienced Project Controls Specialist in engineering and construction industry. Skilled in project cost, scheduling, analysis and forecasting .

Camp attendant ( Customers Service) Hard working(drivers abstract 4-5-6-)

Experienced resource manager with teh ability to perform well under pressure. Extensive experience working overseas with multiple nationalities. Quick learner with a diverse work history.

analyst

Skills summary: Gas and Oil Separation Plant (GOSP), Produced Water Treatment Plants, Installation of diesel Engine Power plants, Mechanical construction works such as Piping, tanks, Ducting, structurals, etc.

Vast array of critical experiences. Operate both independently (single remote site medic) or team (advance life support ambulance service). Disaster management, coordination skills (patient, scene & bystander safety) during crucial events. Coordination of multi-disciplinary emergency services (fire,

HE Electrician/Crane Operator with 5yrs. experience

15 plus years experience in tool and equipment management, warehousing, materials management. Dependable, reliable and honest. Looking for long term employment.

P&PCM, MBA, B.Arch

Seeking a full-time position in Quality Assurance

Junior GIS Specialist ( Mapinfo pro. - Arc GIS .....).. Geologist

Retired PAF personnel having 25 yrs of experience and also remianed as instructor.

I am holding Diploma in Electrical engineering. In total have 7years of experience, 2.5years in Enginnering Industry and 4.5 years in Cement Industry

Diploma in fire and safety, GOOD ALROUNDER IN HSE FEILD

Currently working as the Service Manager for the CAT dealer in Papua New Guinea, Tabubil branch. There are 56 employees in the service department and the branch takes care of up to 40% of HD PNG earnings.

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 [ 85 ] 86 87 88 89 90 91 92 93 94 95 96 97 Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out