Resume - International Project Manager

Misco Jobs

Resume #46852

CONTACT INFORMATION:
View contact information...

AVAILABILITY: IMMEDIATE MOBILIZATION

TITLE:
INTERNATIONAL PROJECT MANAGER

SUMMARY:
Over 30+ years experience in the Petro-Chemical, and Power Generation Industries Worldwide. Expertise includes Construction, Start-Up, Operations and Maintenance of Oil Refineries, Chemical Plants, Combined Cycle, Gas, Oil and Coal Fired Power Generation Facilities. I have experience in both Greenfield and Brownfield Projects, and have used my Financial Management, Logistic and Life Support management skills in harsh environments. Leadership and getting the very best of Team and Equipment in difficult situations is one of my strong suits, making projects run more smoothly and come in on a timely manner. Supervisory / Management skills demonstrated on domestic and foreign multi-million dollar projects. Along with the skills listed above, I bring the experience of a Veteran with Military / Security Experience. I have training and expertise in handling Emergency Situations, Fire Suppression, the Handling of Hazardous Materials, and have recently held an interim Governmental D.O.D. Security Clearance. These strengths along with a strong working knowledge of procedural efficacies dealing with vendors, governmental entities and sub-contractors make me a "well rounded" and versatile asset to any project.

QUALIFICATIONS / EXPERIENCE

Project Manager
Project Manager / Iraq
Senior Sector Advisor / New Generation / Iraq
Owner's Rep
Construction Manager
Site Manager
Start-Up Manager
Lead Start-Up Engineer
Start-Up Engineer/ Puerto Rico
Supervisor Pre-Commission Cleaning / Africa / Puerto Rico
Chemical Plant Process Operator / 1st Class Millwright / Supervisor
Oil Refinery Operator and Operations Supervisor
Co-Gen Start-Up Engineer
Power Plant Operator and Operations Supervisor
Military Veteran / Security and Small Arms Instructor
Fire Suppression / Emergency Medical Technician

EXPERIENCE DETAIL:

CONSTRUCTION MANAGER 2-1-05 to Present
PKA Inc.
Pittsburg, PA

Mr. Barnett was responsible for the construction and oversight of the refurbishment of existing and out-dated Substations in and around the greater Pittsburgh, PA area. Mr. Barnett has been involved with all aspects of this construction endeavor from initial contract negotiations through final close-out of the completed refurbished Substations. Mr. Barnett was also involved with the "Green Field" construction of these Substations from cradle to grave as well. Responsibilities included, but not limited to, complete oversight of all crafts involved in this construction endeavor, tracking of equipment and supplies, long lead time equipment tracking, structural steel, underground as well as Trenwah duct bank installation. Mr. Barnett was also responsible for heavy equipment foundations, marshalling and interface cabinets, safety oversight for the Project on a day to day basis, and interfacing with and generating requisite reports to the Client.

PROJECT MANAGER
GE Power Recovery Project Manager 1-05 to 12-05
Contracted through Penpower to:
GE
Paulsboro, NJ

Mr. Barnett performed as the GE Power Recovery Project Manager for this Turbo-Expander Power Recovery Facility. As Project Manager, Mr. Barnett oversaw all phases of this new and innovative Project from Contract Negotiations to Final Completion. This Turbo-Expander Power Recovery Project produces 18MW of power utilizing waste heat and gas from an existing process.

PROJECT MANAGER
Baghdad Project Manager 6-04 - 11-04
Contracted through Penpower to:
GE
Baghdad, Iraq

Mr. Barnett performed as the Baghdad Project Manager in this joint venture supporting the Infrastructure Reconstruction Program for USAID in Iraq. Mr. Barnett's responsibilities included, but not limited to, implementation of an Assessment Program for nineteen (19) existing Power Facilities, Gas Turbine and Thermal, Project financial management, logistic and life support management, reports for the Client, recruitment and hiring of qualified personnel and all aspects of Security arrangements both in the field as well as in Baghdad. Day to day monitoring of the field assessment implementation of security safeguards as well as remote camp construction security to support the Project was of primary concern. Due to the ever changing security demands in Iraq, this issue was foremost in the vanguard of concerns for the Project. Due to the complexity of the Project, further details can be supplied as required.

SENIOR SECTOR ADVISOR NEW GENERATION / IRAQ 10/03 – 06/04
Contracted through IRG to:
USAID Baghdad, Iraq
Baghdad, Iraq

Mr. Barnett performed as the Senior Advisor for New Generation under the USAID Iraq Infrastructure Reconstruction Program. Mr. Barnett's responsibilities included frequent direct interaction with the Minister of Electricity of Iraq in identifying new generation power projects, viable sites for new generation and the fuel type and quantity required for the new generation. Mr. Barnett oversaw the project management and financial disbursement of more than 1 billion in contracts for USAID to its implementing partners. Mr. Barnett oversaw, interfaced with and advised Bechtel, USAID Prime Contractor, to facilitate the completion of new generation projects. Mr. Barnett worked closely with the Coalition Provisional Authority on the viability of the projects identified as well as security, transportation and sourcing and delivery routing of major equipment and camp locations as well as related logistics. Mr. Barnett was the source for information on restructuring the power distribution grid in Iraq, as well as the proposed rebuilding of the natural gas development and delivery infrastructure for Iraq's generation assets. Mr. Barnett worked closely with the USAID Contracting Officers identifying issues and recommending solutions for the electric sector. Mr. Barnett was supported by and worked closely with the United States Army Corps of Engineers on the quality assurance and control for new generation as well as other technical facets of the electrical sector in Iraq.

OWNER'S REP / MECHANICAL CONSTRUCTION / START-UP 3/03 – 6/03
Contracted to NGS
Greenport Power Project
Greenport, NY 11944

Mr. Barnett performed as the Owner's Rep and was responsible for the completion of construction and initial start-up and commissioning of 1 (one) Pratt&Whitney FT-8 Swift Pac with Water Injection and Evaporative Coolers. This FT-8 Swift Pac is one of the first of Pratt&Whitney's new Turbine design to be installed and go commercial. The Pratt&Whitney turbines operate on Citech software in conjunction with Woodward Controls. Mr. Barnett was also tasked with the BOP configuration and integration into the Start-Up and Commissioning of the SCR with Ammonia injection for the control of NOX and CO. This was in accordance with New York regulations. Responsibilities also included generating field engineering changes, the compilation of Start-Up Packages, all BOP Flushing of Equipment, operator training, procedure writing, CEMS training and Demin-Water training and developing a Site Lock-Out / Tag Out Procedure.

SITE MANAGER / CONSTRUCTION MANAGER 5/02 – 3/03
COMMISSIONING / START-UP
Contracted Through: Defined Source Cooperative, Inc to:
PRENCO Svcs. (Division of Alstom Power)/PEPCO
Construction / Commissioning Management Alliance Program
La Paloma Combined Cycle Site (HRSG Commissioning Oversight)
NIH (National Institutes Of Health) Bethesda, MD
NIH Combined Cycle Project (Greenfield Oversight)

Mr. Barnett performed as part of an ongoing Alliance Program. Serving as Site Manager, he reported directly to the Site Project Manager. Duties included scheduling, managing site budget, site engineering, overseeing and providing direction for all disciplined Superintendents and associated sub-contractors, client interface, vendor interface, coordination with home office project management team including engineering, as well as all administrative reporting. Scope of work included HRSG installation and commissioning oversight and construction completion, commissioning oversight and complete system integration related to the existing NIH Central Boiler House of a Greenfield gas turbine combined cycle 23 MW facility at the NIH Campus in Bethesda, Maryland.
Mr. Barnett was tasked with the demolition of an existing incineration facility and the construction of a new building including all drainage, sewer, concrete, duct banks, roofing, electrical, instrumentation and HVAC installations to house a Alstom GT 10 23MW Combustion Turbine with Co-Generation for the production of 150# saturated steam to augment heating for the NIH Campus. Mr. Barnett worked closely with the PEPCO Project Manager in the completion of this facility.

START-UP MANAGER 1/02 – 5/02
Contracted Through PIC to:
Burns & Roe
Foothills Project
Catlettsburg, KY 41129

Facility consists of 2 (Two) Westinghouse 501-FD's, Combustion turbines, with evaporative coolers with Fogging Systems, Hot SCR with Ammonia injection operating on Tele-Perm (TXP) DCS. Responsibilities included but not limited to: Overseeing completion of construction, initial start-up and commissioning of all plant equipment, performing BOP configuration, overseeing I/O point checkouts, complete integration of all systems to the existing Riverside Power Plant, compiling Start-Up Packages, creating Daily Run Schedules (including MW output & gas usage). The Start-Up responsibilities of the Foothills Power Project were completed one month ahead of schedule.

START-UP MANAGER 9/01-1/02
Contracted through PIC to:
Cal Peak Energy
Border LLC Site
San Diego, CA 92154

Mr. Barnett was responsible for the completion of construction and initial start-up and commissioning of 1 (one) Pratt&Whitney FT-8 Twin Pac DLN w/Evaporative Coolers. The Pratt&Whitney turbines operated on Citech software in conjunction with Woodward Controls. Mr. Barnett was also tasked with the BOP configuration and integration into the Start-Up and commissioning of the SCR with Ammonia injection for the control of NOX and CO in accordance with California regulations. Responsibilities also included the compilation of Start-Up Packages, nomination of daily natural gas usage, operator training, procedure writing, CEMS training and Demin-Water training and developing a Site Lock-Out / Tag-Out Procedure.

SITE MANAGER 2/01-8/01
Contracted through PIC to:
Ameren Energy
Columbia, MO 65202

Mr. Barnett was responsible for the complete installation of 4 (four) GE Frame 6B combustion turbines and Alstom generators in a simple cycle configuration. Included in the scope of work were all civil, mechanical, concrete, structural, electrical, and instrumentation work related to this Installation. He also performed all pertinent BOP work as well as overseeing the engineering and construction of a new 16" Natural Gas Pipe-Line to serve this facility. This project was completed on schedule.

LEAD START-UP ENGINEER 10/00-2/01
Contracted through Universal Energy to:
Duke Fluor-Daniel
McClain Energy Facility
New Castle, OK 73065

Mr. Barnett supervised the completion of construction and initial start-up and commissioning of all equipment associated with this Duke Energy power producing facility. Major equipment included but not limited to 2 (two) 7FA G.E. gas turbines with hydrogen-cooled generators, 2 (two) ABB Triple-Heat steam producing HRSG's, totaling 500 MW. The GE gas turbines operated on the Mark VI software and controls. Ancillary equipment included but not limited to: The flushing of the closed-loop cooling system, HRSG degrease, Compressed Air Blows, Auxiliary Boiler boil-out, and Steam Blows.

LEAD START-UP ENGINEER 05/00-9/00
Contracted by PIC to:
Dayton Power & Light
Greenville, OH

Supervised completion of construction and implemented the initial start-up & commissioning of all equipment associated with this Dayton Power & Light energy producing facility. Major equipment includes but not limited to 4 (four) Pratt&Whitney FT8 Twin-Pac Gas Turbines w/Evaporative Coolers and Water-Injection. Pratt&Whitnry FT8 Turbines operated on Citech software in conjunction with Woodward Controls. Responsibilities also included operator training, procedure writing, CEMS training and Demin Water training.

LEAD START-UP ENGINEER 3/00-5/00
Contracted through PIC to:
G.E. Lee Station CP & L
Goldsboro, NC

Supervised completion of construction and initial start-up and commissioning of all equipment associated with this Carolina Power & Light energy producing facility. Major equipment including but not limited to: 4 (four) 7FA G.E. gas turbines with hydrogen-cooled generators, totaling 720 MW. G.E. gas turbines operated on the Mark VI software & controls. Ancillary equipment includes but not limited to: The flushing of closed-loop cooling systems, fuel oil systems, & water injection skids. Responsibilities also included: CP&L operator equipment, walkdowns, and training.

LEAD START-UP ENGINEER / CONROL ROOM SUPERVISOR 8/99-2/00
Contracted through PIC to:
Central Wayne Energy Recovery Facility
Dearborn Heights, MI

Supervised completion of construction and initial start-up and commissioning of all equipment associated with this Municipal Solid Waste (MSW) to energy facility. Major equipment included 3 (three) D.B. Riley Municipal Solid Waste combustors with a total steam flow of 245 KPPH. Each boiler was fitted with 1-Ignition Burner, 1-Auxiliary Burner, and Detroit Stoker Reciprocating Grates. Power was generated by a 25 MW Ansaldo and Bentley Nevada Turbine Supervisory Instrumentation. Emissions Control System included an Altec CEMS, Fueltec Urea Injection, Chemco Lime Slurry, Wheelabrator SDA and Fabric Filter and PAC Carbon Injection. The Plant Control System consisted of the Bailey INFI 90 with Bailey Symphony Conductor VMS-Series 43 CRTS. Other areas of responsibility included Bailey INFI 90 DCS – On the Job Training of control room operators.

START-UP ENGINEER 5/99-8/99
Contracted through PIC to:
Enron / Eco Electrica
Penuelas Power Plant
Penuelas, Puerto Rico

Responsible for the completion of construction, initial start-up and performance testing of 2 (two) Westinghouse 501-F combustion turbines and 1 (one) Toshiba steam turbine, using Westinghouse DCS controls. This is a Co-Gen facility combined 507 MW.

PROJECT SUPERVISOR 12/98-5/99
Site Management Services International Inc.
Houston, Texas / Penuelas, Puerto Rico / Ghana, Africa

Responsible for Pre-Commission cleaning of Petro-Chemical and Power Generation facilities worldwide. Projects include Steam-Blows, HRSG De-Greasing, HRSG Chemical Cleaning, Turbo-Flushes and Oil Flushes of Steam as well as Combustion Gas Turbines. Overseas assignments include Ghana, Africa and Puerto Rico.

PLANT OPERATOR / OPERATIONS SUPERVISOR 6/84-12/98
Rohm and Haas Texas Inc.
Deer Park, Texas

Responsible for the safe, efficient daily operation and maintenance of various Chemical Processes. Prepared daily and monthly production reports, safety (lock-out, tag-out) clearances, hot-work permits, confined-space entry permits and coordinated maintenance activities to insure maximum unit production. Mr. Barnett also oversaw several pipe-line additions for this facility. Developed extensive computer skills. I entered and completed the Rohm and Haas Course for Millwrights and graduated and worked as a 1st Class Millwright and Millwright Foreman on rotating equipment of all sorts. I was a member of the Rohm and Haas Fire Brigade my entire tenure and as such am very familiar with Haz-Mat situations and procedures.

SHIFT SUPERVISOR AND START-UP ENGINEER 1/84-6/84
Houston Light and Power
Houston, Texas

Responsible for shift personnel in starting up and operation of a 650 MW coal-fired boiler and water treatment.

PLANT OPERATOR / OPERATIONS SUPERVISOR 11/77-1/84
Charter International Oil Company
Houston, Texas

Operated several processes within the Charter Refinery Organization such as the Crude Oil, Cat-Cracker, Platformer, Udex, etc. The Crude Oil Unit utilized Sour Crude and as such was processed through a De-Salter. Worked my way up to Operations Supervisor where my duties included but not limited to: Total shutdown and refurbishment of Heat Exchangers, Process Vessels, Heaters, Fin Fans, Underground Piping, Pipe-Lines, Headers and Piping, Boilers and associated equipment. Scheduled all work to be accomplished and managed the manpower to complete the turnaround as well as securing all documentation required. Supervised and commissioned the addition of the Solvent De-Asphalting Unit for Charter Oil. Worked with and issued Engineering changes to facilitate the existing Processes for Charter Oil. I was a member of the Charter Oil Fire Brigade my entire tenure and as such am very familiar with Haz-Mat situations and procedures.

U S AIR FORCE 10/75-10/85
Worldwide

Completed the Basic Training Course at Lackland Air Force Base in San Antonio, Texas. Additional training in Air Police, Combat and Advanced Combat Training, Air Base Combat Defense Training as well as Search and Rescue Training. Graduated as one of two Honor Graduates from my Basic Training Platoon. I was assigned to a Strategic Air Command Base (SAC) in Abilene, Texas where I held a Top Secret Military Security Clearance. After separation from Active Service, I joined the Air National Guard and served at Ellington Air Force Base in Houston, Texas from 1977 to 1985. During my tenure in the Air Guard I completed the training for Marksmanship Instructor for the Air Force and was the NCOIC or Non-Commissioned Officer in Charge of the Marksmanship Unit on the Ellington Air Force Base. I received extensive First-Aid training as well as completing the Non-commissioned Officers Course for the Air Force.

HOUSTON FIRE DEPARTMENT 10/69-10/75
Houston, Texas

Completed the Houston Fire Department Training Course and graduated as a Pipe and Ladderman. I served as a Pipe and Ladderman in Fire Suppression for 2 years and then completed the training involved to serve as an Emergency Medical Technician (EMT). My tenure with the Houston Fire Department taught me to deal with stressful and life threatening situations in a calm and thorough manner while maintaining control over the situation.

------------

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1801 to 1850 of 4371)

Go to Search Parameters...

Brief Description

Respected Sir, Please accept this letter as application for a suitable post in Sales / Marketing in your esteemed organization.

Civil engineer with extensive experience in overseas contract management including West Africa.

To utilize my acquired background in the field of Electrical Engineering as well as my higher education in Engineering Management and to perform quality work in a professional career related to my technical skills

management experience of a wide variety of environmental projects including international HSEMS, development and implementation of environmental management systems, development and provision of audits and training courses.

Twenty nine years of engineering management experience for which 24 years in the oil, gas and shipping industry -EPC projects which includes: Project management, conceptual, feasibility studies, FEED and detailed design engineering, procurement, planning, organizing, QA /QC, construction,

Senior piping designer

Planning Engineer

Onshore/Offshore Medic,very experienced medical doctor with long years of medical service

HSE Manager

Instrument & DCS Specifications datasheets, I/O list preparation, JB,Cable schedule, Logic Diagrams, Wiring Diagrams, Cable and Tray routing, hook-up Drawings, Installation Standards, MTO, Technical Procurement assistance, DCS Detailed Engineering, Project, construction and commissioning activitie

Lead Structural Designer

Worked Northern Canada pipelining for 6 years,seasonal. Ran my own crew, operated various machinery over the years. Side Booms, Dozers D6-D8's, Loaders, Haul Trucks, Excavators. Have Done lease builds and reclamation. Also pipefitted for several years aswell. Finally a back ground in sales.

Document Controller

Familiar with onshore and subsea pipeline design criteria / requirements, codes and standards: Familiar with offshore pipeline installation and design requirements. Proficient in the use of MS Project, Word, Excel, and Power-point. Familiar with stress analysis procedures ANSYS and Orcaflex

Master marketer, business developer, facilities and maintenance manager, technical engineering savvy, director level International experience of 28 years

Safety and Health Professional with 35 years experience

An Electrical Engineer with over 2 decades of experience in Project Management, Operations & Maintenance, Installation & Commissioning and Quality Assurance at Mining/ Quarry. Currently associated with MILLENNIUMVEST SDN BHD., Malaysia as Head of Operations. Expertise in handling the complete projec

Manager of Projects; Operations manager for OSV,DSV AHTS etc. Construction manager;Workshop manager

Welding positin utilizing technical skills for a growth-oriented organization.

Graduated in 2000 with a BSc in Architecture. Since then, I have been involved in the supervision of site works and the execution of architectural finishes in addition to the review of shop drawings for major mixed-use developments and tourist resorts in Egypt.

Highly experienced Planning Enginner (scheduler) in the Nuclear sector. Very computer literate and from a unique and enviable IT/Engineering background. A deep background in projects and technology exploitation. Very well regarded and likable.

Pipe and structural welder, heavy equipment operator

Engineering Diploma Holder with14 years experience - Auto CAD, Unigraphics,Master Cam,Catia V5.

I ama Graduate Quantity Surveyor currently working in Dubai asa Project Quantity surveyor

Piping & pipeline constructions

Mechanical Engineer with more than fifteen (15) years of combined experience in engineering in various industries, which includes plant operations in various industries, which includes offshore and onshore oil & gas design, petrochemical, chemical manufacture, gas processing, and other industries.

I offer a Civil Engineering background specialized in Soil Mechanics and Foundation Engineering with a total of four years of working in various projects in India.

Please Contact ASAP

National sales & marketing rainmaker; F1500 specialty; top five on every sales team.

Communication engineer

8 YEARS EXPERIENCE:-

Skills: Critical thinking, active listening, negotiation, persuasion. Qualifications: Product /Proyect /Marketing Manager

Tax Specialist

15 years Domestic and International Management experience. B.Sc. Mining Engineering.

Diploma in electrical engineering

Electrical planning engineer, currently working on the network under supervision and currently training to become fully authorized.

-Self-starter and ability to work independently.-People friendly and good communication skills.-Ability to adapt and learn quickly.

Presently employed as E & I QA/QC Inspector , Diploma in Chemical Engineering

I have the experience of complete Electrification of UP Petrochemical Plant and commissioned various Coal Handling Plant in various projects in Fenner India Ltd. I was working in Hyundai engineering and construction company ltd, Korea as Astt. Manager(Electrical) in Abu Dhabi for 19no. 33/11 KV

Construction Engineer, Commissioning Engineer, Instrumentation Designer, Field Engineer, Construction Coordinator, Lead I/E Designer, Instrumentation Design Supervisor, Instrument Engineer, Project Engineer, Pipeline Block Valve Engineer - these are some of my more recent job titles.

Functioning in a project/program management consulting role for MAXAM and CYANCO Companies on highly sensitive processes. In these assignments, I assembled high-performing teams that delivered a complex project plan ahead of schedule, despite a demanding timeline and aggressive business objectives

To work in oil and gas refineries, high rise buildings, jet fuel storage, cross country pipelines to international airports, road works and other related industry that may acquire my skills and knowledge.

Free! Experienced HR professional; MBA in HRM; International compensation, recruiting, employee relations, performance management, training and development, health and safety

Planning Engineer/ Project Management/ Consultancy

Responsible for assisting in driving the organization

Seeking an International and challenging position in the field of Quality Assurance / Quality Control in the large Oil & Gas Sector in an established company where I will be able to contribute my full efforts for the prosperity of the company and at the same time enrich my knowledge and experience.

Master's in Mining Engineering.Experienced in dam engineering, Rock Drilling, Grouting and Excavation.Expert in Tunnel and Slope Stabilization (like Rock Bolting,Soil Nailing,Shotcreting,Dentition and Rok Buttress)

International Project Manager

Please consider this letter as an application for employment within your company. I wish to apply for the position as HVAC ENGINEER /Design Drafter/Quantity surveyor that will give me an opportunity for growth and career challenges particularly in the areas of design engineering and technical drafti

Land Surveying, Setting Out, GIS, Cadastral, Photogrammetry, Remote Sensing, CAD

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 [ 37 ] 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out