Resume - 31 years experience (10 years international)in project and contract management o...

Misco Jobs

Resume #4881

CONTACT INFORMATION:
View contact information...

QUALIFICATIONS
Corporate Member – Institute of Engineers, Australia.
Chartered Professional Engineer, Australia. No.404988

MISCELLANEOUS
Australian citizen, age 54, health very good, non smoker.

EXPERIENCE

10 years international working experience in Indonesia(6), Mongolia(1), HongKong(1) and Japan(2).

Mar 2003 – Dec 2003
Clough Limited
Ulaanbaatar – Mongolia
Boroo Gold Project
Senior Commercial Manager

Project was for the design, engineering, supply, construction and commissioning of a $50 million 1.75MTPA gold processing plant at a site location 120 km north of Ulaanbaatar capital of Mongolia. This was the first major project of this nature built in Mongolia since the Russian departure in the early 1990's.

Started partway through the project to take over the commercial management of the project, which included cost control, scope changes, management of all in country subcontracts, purchasing, accounting and finance, coordinating local statutory design and construction approvals and other support as required in order to fast track the completion of the work.

Nov 2002 – Feb 2003
Clough Limited
Perth, Mackay Qld
Senior Commercial Manager

Relocated back to Australia to assist with commercial management and review of a number of large ongoing projects in Australia, including involvement in the Boroo Gold Project.

Jan 2001 – Oct 2002
Clough Engineering – PT Petrosea
Indonesia
Manager Timika Operations

Based in Timika, Irian Jaya

The operation essentially provides contracting services and equipment hire to Freeport Indonesia copper and gold mining operations.

A base workforce of approximately 600 spread over 100 km from the port site in the tropical lowlands to the Grasberg mining operations located in the highlands at 4,000 metre elevation.

In additiion major stand alone projects are also performed for Freeport and other Clients.

Sep 1999 – Dec 2000
Clough Engineering Limited - PT Petrosea
Indonesia
Kakap Gas Compression Project West Natuna Sea
Commercial Manager

Based in Jakarta.

Client for this project was Gulf Resources (Kakap) Ltd and the project scope was total EPCM of retrofit addition of gas processing facilities onto three existing platforms in order to export 66 MMSCFD (initial base load, later 90) of gas in subsea pipelines to Singapore. Scope also included installation of 30 km of 10" & 12" in field pipeline at depth of 300 feet. Site location was 280 miles NE of Singapore. Value of works was approximately $60 million.

Responsible for commercial management of the project. This included control of budget, cash flow and management of accounting services. Duties also included the compilation and administration of some thirty varied onshore and offshore subcontract packages.

Jan 1999 – Aug 1999
Clough Engineering Limited - PT Petrosea
Indonesia
Batu Hijau Project Sumbawa
Commercial Manager (Deputy Area Manager)

Transferred to Sumbawa area office from Sulawesi.

Responsible for commercial management of project works on Sumbawa and the tendering of new work. Contract works include major civil earth works and plant hire, process plant pipe spooling fabrication, electrical, painting, town site housing, steel work, insulation and other miscellaneous works.

Jul 1996 – Dec 1998
Clough Engineering Limited - PT Petrosea
Indonesia
Inco Nickel Refinery Expansion – Sulawesi
Project Manager/Contracts Manager

Initially based in Jakarta where duties included the upgrading and implementation of management procedures and systems.

Relocated to Soroako, South Sulaweisi, mid 1996, where PT Petrosea were working on a number of contracts for International Nickel (Inco) at their nickel mine, refinery and port facilities.

Contract works included upgrading port facilities, river dredging, refinery site grading, site piling, building and infrastructure works, underground electrical and piping utilities, provision of site services, electrical, instrumentation, mechanical and piping works. Value of works performed was $80 million.

Duties included co-ordination of site management systems, contract management duties, tendering of new major works and project management.

Aug 1995 - Jul 1996
Clough Engineering Limited – Clough Bells JV
Hong Kong
San Miguel Brewery
Project Services Manager (Deputy Project Manager)

Project Services Manager for joint venture between Clough International Ltd and Bells Technologies International Ltd (subsidiary of Wah Tung Group Hong Kong) which is contracted to install all process equipment, piping, instrumentation, electricals, insulation and associated works for the new 1.1 million hectolitre San Miguel Brewery at Yuen Long, Hong Kong. Value of works performed was approximately $20 million.

Project services provided to support the project include scheduling, engineering and design coordination, technical support, document control, purchasing, costing claim coordinating and subcontract administration.

1994 - Jul 1995
Clough Engineering Limited – Technical Resources Group
Perth
Tender Coordinator/Proposal Manager

Relocated to head office as Tender Coordinator for various tenders. Tenders submitted include:

* 50 MMSCFD oil and gas processing plant at Dhodak for Oil and Gas Development Corporation of Pakistan.
* 20 MMSCFD oil and gas processing plant and additional sulphur recovery from an existing plant at Dakhni for Oil and Gas Development Corporation of Pakistan. (This work was subsequently awarded to Clough).
* 50km gas treatment pipeline and facilities at UCH for Oil and Gas Development Corporation of Pakistan. (This work was also awarded to Clough).
* AVCAT Aviation Fuel Storage Expansion for Department of Defence (Navy) at Garden Island WA
* 20 MLPD Water Treatment Plants for SECWA/Western Power at Muja Power Station, Collie WA

1993 - 1994
Clough Engineering Limited
Perth
Project Engineer

Assigned to Marandoo Hamersley Iron $40 million 2,000 TPH Crushing and Screening Plant Project as Project Engineer for Clough Engineering Group, responsible for engineering procedures, design coordinating, progress measurement, changes and claims coordination.

1992 - 1993
Clough Engineering Limited – Corporate
Perth & Indonesia
Senior Commercial Engineer

Working between the Perth and Indonesian offices on the Pagerungan Island Gas Field Development Project.

This was an EPC contract for a $200 million 350 MMSCFD natural gas processing plant and associated onshore/offshore facilities. Responsible for claims coordination and negotiations.

Also responsible for commercial activities/coordination between Indonesian project office and Perth engineering group. Assigned to Surabaya office in Indonesia for five months during this period.

1991
Kaiser Engineers Australia Pty Ltd
Perth
Project Engineer

Assigned to KJK Joint Venture on the Woodside North West Shelf LNG Project, Phase III as Project Engineer. Responsible for DOHSWA interface and review of stationery equipment, vendor documentation and engineering queries.

1989 - 1991
Kaiser Engineers Australia Pty Ltd
Worsley
Construction Engineer

After period as member of study team was assigned as Construction Engineer to the $50 million Worsley Alumina Roundout Project. Responsible for all QA and QC activity performed by the on-site subcontractors; all technical queries and technical appraisals pertaining to construction and for checkout and handover of completed facilities to the client.

This included site drawings and sketches, as-built drawings for all disciplines, vetting and review of vendor data pertaining to the subcontracts and the control of all documentation, drawings, manufacturer's data reports, operating and maintenance manuals.

1989
Kaiser Engineers Australia Pty Ltd
Perth
Woodside North West Shelf LNG Project
Manager - Commercial

Reporting to the Manager of Project Services, was responsible for the compilation of vendor backcharges on the $2,000 million Woodside North West Shelf LNG Project based on charges relating to rectification work on non-conforming and defective goods. This involved the formulation and processing of claims totalling $5 million through to negotiation and settlement with the vendors.

Also provided assistance to the project's Legal Counsel in the reviewing of draft subcontracts and purchase orders, along with the formulation of standard documentation required for the Phase III activities.

1987 - 1989
Kaiser Engineers Australia Pty Ltd
Karratha
Woodside North West Shelf LNG Project
Subcontract Coordinator

Assigned to KJR Joint Venture on Woodside North West Shelf LNG Project, construction phase. Responsible for the contractual and commercial coordination of $80 million Offplot Piping/Mechanical, Electrical/Instrumentation and Painting subcontracts.

1987 - 1987
Kaiser Engineers Australia Pty Ltd
Perth
Woodside North West Shelf LNG Project
Subcontracts Engineer

Responsible for the tender compilation and award of the Offplot Electrical/Instrumentation field subcontract for the Woodside North West Shelf LNG Project.

1985 - 1986
Kaiser Engineers Australia Pty Ltd
Japan (2 years)
Woodside North West Shelf LNG Project
Project Engineer

Assigned to KJR Joint Venture, initially for the Study Phase and then for Implementation Phase II of LNG Project where initial work involved reviewing technical specifications and other project documents.

Transferred to Project Engineering to coordinate project requisitioning procedures and preparation of technical packages for consultant and field subcontracts.

Responsibilities included coordinating the ongoing associated engineering input including engineering interface with KJR Perth and the client (Woodside) at Yokohama.

1984 - 1985
Kaiser Engineers Australia Pty Ltd
Worsley
Area Manager

In 1984 took over as Area Manager Process Plant on the $1,000 million Worsley Alumina Project. In this capacity completed construction, provided operations commissioning assistance to the client and provided input to the debugging of the operating plant.

Work also included Refinery Primary, Finishing Areas and Power Plant.

1981 - 1983
Kaiser Engineers Australia Pty Ltd
Worsley
Contract Supervisor

As a Contracts Supervisor on the Worsley Alumina Project was responsible for supervising subcontracts, scheduling of work, inspection of materials and equipment installed and documentation of the subcontracts' activities as required by the contract and project procedures.

Work involved supervising subcontractors' operations, programme manpower and equipment usage; coordinated subcontractors' work with other subcontract and construction forces so as to maintain the contract schedule; inspected materials and equipment as installed for compliance with contract plans and specifications and maintained documents.

Also responsible for refinery tankage, steelwork, mechanical equipment, and piping erection and installation. Including setting up and responsibility for control of Miscellaneous Works (client requests) for the refinery, power plant and port.

1980 - 1981
Kaiser Engineers Australia Pty Ltd
Perth
Construction Manager

Joined Clough-Kaiser-KWM on the $100 million Swan Brewery Project as a Clough secondee. Initial work as a Mechanical Engineer included supervising the old Emu Brewery removal before being appointed Construction Manager.

Work included major new modifications to hot water piping and tanks, waste disposal and filtering systems, (specifications through to commissioning) and the finalisation of all project work and winding up of the Project Management Agreement with Swan.

1979 - 1980
JO Clough and Son Pty Ltd
Perth
Senior Mechanical Engineer

Compiled submissions to the Department of Productivity for the Water Treatment Systems House Joint Venture proposal. Assisted with tender preparations (welding and fabrication methods and quantities) for three offshore platforms for Esso at Barry Beach, Victoria. In June 1979 seconded to CKK Joint Venture (Swan Brewery).

1978 - 1978
JF Thompson (WA) Pty Ltd
Perth
Project Manager

Responsible for ten 150 cubic metre underground fuel tanks for RAAF at Learmonth for Department of Construction and associated civil and mechanical work. Project Manager for beneficiation plant yard piping at Newman for Bechtel.

1977 - 1978
JF Thompson (WA) Pty Ltd
Perth
Senior Project Engineer

Engineering and project coordination, costing and variations for Swan Brewery Contract. (Supply and installation of stainless steel brewing and storage vessels and miscellaneous piping).

1976 - 1976
JF Thompson (WA) Pty Ltd
Melbourne
Manager

As Manager based in the Melbourne Branch responsible for major extensions to blasting and painting facilities together with other shop improvements for both Queensland and Victorian workshops.

1975 - 1975
JF Thompson (WA) Pty Ltd
Karratha
Manager

Responsible for a workforce ranging between 40-100. Duties included estimating, design, client liaison and industrial relations. Major clients were Hamersley Iron, Mount Newman Mining, Shell, Bocal, State Energy Commission and Cliffs Robe River.

Jan 1973 - Dec 1974
JF Thompson (WA) Pty Ltd
Perth
Works Manager

Responsibilities included estimating, production and quality control, manhour and cost control, steel purchasing requirements, project coordination, client liaison and invoicing. Projects included 800 tonnes of Hull sections for ODECO Oil Rig; 10 sets rake arms and cages for Alcoa thickeners, stainless steel kiln hoods for Western Titanium and stainless tank and steelwork for WMC. Nickel Smelter, Kalgoorlie and shop support for the company's field tank erection projects.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 801 to 850 of 4409)

Go to Search Parameters...

Brief Description

I am a qualified mechanical Engineer specialized in Acoustics

Testing,repairing and troubleshooting electronics down to component level.

Planning & Scheduling, Construction

Construction Manager

Handles a group of people with a different kinds of work trade in quality assurance, inspection, records, work evaluation and recommendation.

OBJECTIVE: A Management/Field Position in Civil Engineering or Construction Management.

Transmission Planning Engineer, BES Operations Engineer, PTI/PSSE Consultant

Electrical Engineer with 12 years experience mainly with GE USA in the field of industrial project in steel, power and coal sector

Fifteen years in human resource (HR) leadership roles. Certified by SHRM as a SPHR, MBA with experience administering/interpreting HR policies and developing/implementing innovative people practices to increase profitability. Certified Team Leader/Facilitator and TQM Tools Trainer.

Qualification Bachelor Degree in Civil Engineering Total Professional Experience 14 Years and 2 Months –Include 4 years and 9 months in Singapore & 2 yrs. in Malaysia.

Electrical Engnineer with experience in system design and maintenance planning of electrical facilities including motors, motor starters, switchgears, power distribution, and cabling.

Document Controller

Have experience running track excavators, dozer, roller, grader, backhoe, skiddsteer, haul trucks, semi truck, many more and class a cdl, run family company in construction and excavation for over 10 years

To secure a challenging position in an environment which provides opportunities on acquired expertise and experience as well as a position with career growth potential in a competitive aerospace.

Responsible all electrical installations, wiring, piping, motor control

20 years overseas contracting, Mining and Construction

Proactive and versatile drafting professional with a solid reputation for generating long-term results in a short-term world. Effective problem-solver who interfaces well with management, co-workers and clients. Able to meet aggressive deadlines, juggle multiple priorities independently or in a team

Experience in Middle East

Well Experienced Human Resources Professional in Recruitment, Salary Administration, Writing of Job Writing, Employee Relation, Employee Record Administration, Leave Record, and Settlement

Execute all structural works, finishing works. Aware of survey works. Using computer software proffessionally

20 plus years of experience in all aspects of the electrical field, last 17 in Industrial work.

I am interested in a permanent position as Director or Manager in Safety, Risk Management or Loss Control and/or Environmental Management. Enclosed is my résumé for your review. Sincerely, Damien G. Barr, CSE, AEP

Senior Contracts Manager 25+ yrs experience in Power Plants, Airports, Water Treatment Plants, major civils, UK, Malaysia, Pakistan, Gibraltar. Contracts Management from inception to completion (EPC + Supplier)with broad knowledge of planning, cost control and project management.

Planning/Scheduling

Experienced Cad Manager/Project Coordinator. Multi Discipline Design. Proficient with 3d modelling using Autocad, ADT33, Autoplant, CadDuct and MultiSteel. Also experienced in using Microstation, PDMS, Prime Medusa and ProCadam. Engineering background - Structural/Civil.

Experienced in total project control from tendering stage through to commissioning and hand?over. Experienced in managing and training of multinational workforces. Experienced in Labour selection and control procedures.

a. 10 years in Qty. Survey and Cost Estimates for multi-million dollar Int'l Projects. b.10 years in Electrical Power Projects for Power Plants, HV OHL Transmission Lines and Substations. c. 2 years in multi-million dollar Military a

1) GULF EXPERIENCE (21 YEARS). 5 YEARS EMPLOYED AS PROJECT ENGR IN ALMORAM CO SULTANATE OF OMAN. 2)Past 9 years from 1989 to 1998 worked as E& M Engineer at UNITED CONTRACTING Company. 3)3) 7 Years ( 1977 – 1984) worked as maintenance supervisor in ARAMCO at SAUDI ARABIA.

Profesional in the industry with technical management and sales background.

PERSONAL RESUME

23 years project management

Over 20 yrs of QA/QC Manager, Construction Manager, Project Manager

Full Project Life-Cycle Control and Maintenance Implementation.

Maintenance Specialist

as per attached

31 years experience (10 years international)in project and contract management of large scale industrial projects in the oil & gas (onshore & offshore), alumina, petroleum, brewing, iron ore, nickel, gold and general mining industries.

To secure a challenging and rewarding career in the Electronic Repair Industry that puts emphasis on increasing responsibilities, personal growth, professional achievement, continued education and a company that offers opportunities for career advancement.

A dedicated, committed individual who is both practical and adaptable positive and versatile a self-starter with an ability to motivate individuals to achieve results a team player. Years of experience in the industry, available for work anywhere, longing to work oversea's, reliable and felxible.

I am very interested to offer years of hands on construction management and or supervision to you for the unannounced position in the selected communities in the areas you mentioned anywhere in the USA.

Experienced UK qualified accountant. Finance and administration Manager in large construction projects in North Africa employing 1,500 site construction workers.

My job duties included scheduling, overseeing, and inspecting various jobs sales, clerical, scheduling and overseeing jobs, as well as site surveys and project submittals. .

Bachelor Of Civil Engineering, IELTS score of Avg6.5, Experienced in building industry for 19 years and trained in OHS

HSE Officer with a background of over 19 years in handling safety, Health and Environment in large multi international Oil & Gas, Chemical and Construction Companies (industrial, power plant, petrochemical, marine facilities and heavy fabrication).

BS Electronics and Communications Engineering, Proficient in Microsoft Office XP (Word, Excel, and PowerPoint), Taken up CCNA Sem 1-4 of CISCO Networking Academy, Knowledgeable in Autocad,

I have worked in the Industrial,and the commercial construction for years, I'am goal oriented,i started from the bottom which is cement finishing, to carpentry rough and trim, I have ran a variety of machines and now i look forward to go further with moore expeience with this company.

Mechanical/Construction/Millwright Superintendent

More than 25 years experience in electrical field.

Civil & Structural & QAQC Construction Superintendent

Hands on experience in planning, erection, commissioning and trouble shooting of Cement Plant Machinery. Additional experience in Refractories for kiln and Steel Casting parts for Cement Plants. Diploma In Mechanical Engineering (4 years - Industry Integerated from Larsen & Toubro Institute)

To build a strong career in the industry, take up more challenging assignment, responsibilities and rewarding career in the excellent working environment and move up the ladder by working towards achieving organizational goals and objectives.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 [ 17 ] 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out