Resume - Searching for a position within the Construction & Civil/Structural Engineering ...

Misco Jobs

Resume #5042

CONTACT INFORMATION:
View contact information...

Professional Experience:

2002-Present RMF Engineering, Inc. - Baltimore, MD
Title: Project Engineer
1.Oversee the overall structural design of various projects. These include chillers and boiler plants, building of health facilities, industrial buildings and all other structural support to civil and site work.
2.Conduct the needed liaison with other engineering disciplines to reach accurate professional decisions.
3.Asset integrity assessment and stress analysis evaluation for the structural integrity of fatigued structures and retrofit buildings, and development of rehabilitation plans and designs.
4.Prepare structural drawings and specification documents submitted for the bidding process.
5.Evaluate the structural cost estimate.
6.Review shop drawings and its compliance with structural drawings.
7.Attend site inspections and monitor progress and quality of work, material inspection and testing.

2000- 2002 Black & Veatch Corporation, Kansas City, MO-USA
Title: Civil/Structural Engineer II
1.Structural design calculation following the standard codes and B&V recommended practices.
2.Design, modeling and analysis of Structural Steel pipe rack of the power block. These include design of base plates and anchor bolts, connections, beams, columns, and vertical/horizontal X-bracing.
3.Structural foundation design for equipment. This includes footings and concrete base mat.
4.Structural condition assessment and evaluation of structural elements of the retrofit projects. This includes developing of spreadsheets and calculations supporting any amendments.
5.Review Civil/Structural shop drawings and ensure its compliance with design requirements, contract requirements, properly coordinated with other discipline and submitted as per construction schedule.
6.Site feasibility studies. This includes site assessment, review of geological report, site accessibility, utilities location, and other potential factors.
7.Design the site layout. Coordinate with interdepartmental engineers for specific equipment layout and sizes. Develop Entire plan. This includes design the grading layout, storm water and drainage systems, buildings parameter, storage tanks, parking, entrance and driveways.
8.Perform several calculations to balance the site (cut/fill quantities), and finalize the site bill of quantities.
9.Conduct supportive documents/calculations for the permitting agencies.
10.Participate in reviewing Engineering Change Notices (ECN) and provide comments to the Construction Supervisor.

1998-1999 United Nations, Jaffna, Sri Lanka
Title: United Nations Civil Engineer
1.Supervise the technical aspect of implementation of infrastructure projects with total budget over 1.5 million U.S. Dollars. Conduct needs analysis and design of structural elements.
2.Oversee the design of concrete structures and detailed shop drawings. Closely monitor concrete pours and check continuously of concrete materials delivered to site, ensure compliance with QA/QC procedures. Control and direct the process of placing re-bars.
3.Review and comment on formwork/shuttering systems/reinforcement and other key elements to ensure quality, safety and constructability aspects are met. Issue NCR (Non-Conformance Report) to any part of the work if not complying with the required quality.
4.Quantity determination, and cost estimates Perform observation, measurement and documentation of construction activities, material inspection including concrete and steel bars.
5.Preparing monthly and final progress reports. Conduct project reports.

Education:
1. 1997-2000 The University of Akron
M.S. in Civil Engineering, GPA =3.713/4.0
Thesis topic: Evaluation the mechanical properties of Palmyrah timber.

2. 1988-1993 Makeyevka Civil Engineering Institute
B.Sc. & M.Sc. in Civil Engineering, GPA= 3.85/4.0
Thesis topic: Design of 16-storey residential building.

Award Received:
Awarded the University of Akron assistantships, Department of Civil Engineering:
1.August 1999-May 2000 (US$ 20,790)
2.August 1997-May 1998 (US$ 14,250)

Highlights of Skills & Qualifications:

Computer Skills:
1.Terramodel 9.6
2.Culvert Master
3.AutoCAD 2000
4.Risa 3D 4.0.
5.STAAD III
6.MathCAD

Training & Workshops:
1.Space Control Panel Discussion, Black & Veatch Corporation
2.3D Control in Earthmoving, Black & Veatch Corporation.
3.Underground Design/Support, Black & Veatch Corporation
4.Excavations & Earthwork, Black & Veatch Corporation
5.OSHA 10 Hour Training Course in Construction Safety and Health
6.46th Annual Structural Engineering Conference, The University of Kansas
7.Voton Foam Concrete, AJ Voton LLC
8.Hydrophilic Double Locking Waterstops, Mitsubishi International Corporation, Adeka Ultra Seal.
9.Polyethylene Piping System, Driscpipe
10.Piping System, Phillips Petroleum Company
11.Overhead Cranes, Engineered Material Handling

Languages:
1.Fluent in English, Arabic & Russian Languages.
2.Basic in German Language.

Professional Membership:
1.Member of the American Society of Civil Engineers (ASCE)
2.OSHA Construction Safety & Health Certificate.
3.Confined Space Awareness Entry

References will be provided on request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1801 to 1850 of 4802)

Go to Search Parameters...

Brief Description

PIPING DESIGNER/DRAFTSMAN(PDS/PELICONFORGE/SPR/CAD/MICRSTATION)

MSc of Engineering Science, East Ukrainian University – Ukraine (1998),  BSc Instrument & Control Engineering, East Ukrainian University – Ukraine (1997)

MA(ECONOMICS), PGDCA, HEALTH & SAFETY MANAGEMENT DIPLOMA, FIRE AND SAFETY MANAGEMENT DIPLOMA, FIRST AID DIPLOMA, CONSTRUCTION SAFETY CERTIFICATE, COSHH CERTIFICATE, SAFETY MANAGEMENT CERTIFICATE, OHSAS-18001-1999 HEALTH AND SAFETY INTERNAL AUDIT, ENVIRONMENT AWARENESS CERTIFICATE, MANUAL HANDLING CE

Chemical Engineer with 6 years experience in Drilling, Pipeline Operation, Construction, Economic Modelling, Health, Safety and Environment, together with Sustainable Development and Issues Management. 6 languages and American Citizenship, would like to work in Houston, Texas.

Search for job in car or food industry.

same as resume one

15 years experience in implementation & maintenance of ISO 9000 QMS, Internal Audits, preparing QA/QC procedures, Quality control in construction of Tunnel, sewer/storm water pumping & lift stations, drain & sewer pipelines, Cross regulators/falls, siphons, bridges.

Searching for a position within the Construction & Civil/Structural Engineering profession, in a progressive employer that provides career growth and excellent advancement opportunities.

I’m a Computer Aided Drafter/Designer with 15 yrs experience in various fields. I use AutoCAD up to version 2002, IDEAs SDRC v. 7-9. I’ve worked some with MicroStation and AutoDesk Inventor. I am looking to relocate to Virginia or Pennsylvania Reading area.

I want to relocate to USA/UK/CAnada,hence need an employer who can hire me and sponsor me for visa.

10+ years of project management experience in the areas of accounting and financial reporting in various industries, including Management Consulting, Retail and Wholesale, Manufacturing and Distribution, Mining and Construction

I have a total of nearly 13 years experience drafting, with about 9 of those years in the home building business. I also have 5 years in Coil Production (AC, Steam, Condenser, & Air Handlers) I have developed custom designs for previous companies specifically tailored to the customers needs. I have

I have diploma in Surveying and 4 years exp in High rising Bulidings. I can operate all kind of Survey instruments

Diploma in production engg.and nace level-1 & 2 are comleted

Former GS 15, U.S. Government Contract Officer (KO) & Administrative Contract Officer (ACO)¡Xcurrent Senior Level Professional seeking a Project/Program Management and or Business Development opportunity

Mechanical Engineer - 20+ years maintenance experience in mining - both Underground & O/Cut. Also Processing Plant maintenance & Project Management on new Greenfields plants.

Piping detail, scheduling, field work and design in refineries, chem plants offshore prouction platforms, onshore and offshore oil drilling rigs sugar mills using acad,( short term cadworx,rebis, smartplant) and on the board

CERTIFIED IN HEAVY EQUIPMENT OPERATION, EXPERIENCED LABOR WORKER, KNOWLEDGE OF SAFETY AND TRAINED IN MSHAW, CPR CERTIFIED,CUSTOMER SERVICE SKILLS, ETC.

Implementing the health and safety plan. Daily Tool-Box talks prior to commencement of work. Inductions of new staff members on site. Ensuring that every team member wears PPE equipment and that it is worn correctly. Specified to each projects’ requirements.

LAND SURVEYOR

Seventeen years experience in electrical engineering design, construction supervision, commissioning & start-up for major international EPC and Consulting firms specialized in power generation, T & D grids, oil and gas petrochemical fields

Project Controller with extensive experience of implementation and operation of project management systems. Detailed knowledge of C/SCSC & EVM systems. Experience in Petro-Chem, Oil & Gas downstream distribution, Rail, Defence and Civil Engineering sectors. Extensive procurement experience.

Summary of Qualifications,Combined experience in Industrial Refrigeration Technician / Electrician Technician in the Pharmaceutical Industry,Petro chemistry, Building Management System (BMS), Ship Systems, Maintenance and Troubleshooting.

Design engineer

25+ yrs progressive exp. as a Sr. Supervisory Planning/Scheduling & Project Control Engr/Mngr with Risk/Contracts Exp, Int'l w/Utilities, EPC Firms/Consultants, Turnkey OEMs and Constructors within the Energy Sector. P3 Ver.3.1, Primavera P3e/cVer.5, 6.2,Pertmaster, Claim Digger, MS Office, Acrobat

Fifty Years Total Experience in process engineering and technology development. Including More Than Twenty Years Process Engineering Experience on petroleum refinery, oil & gas production and petrochemical projects. Experience includes process simulation software Hysys/Pro II/Dynsim/Aspen.

D10 dozer, 637 push-poll scraper, Loaders, Crusher, Track-hoe, Blade, ect. Maintain equipment, water lines, sewer lines, house pads, Road construction, Airport construction, GPS. ect...

The majority of my 15 years of experience has been applied to inspecting in-service pressure equipment and piping in a refinery setting. I am an excellent communicator with exceptional organizational skills geared toward inspection, NDE planning and crew leadership.

Chief Engineer (Manager) in Technical Office for a large construction progect :High Rise building, Under ground Metro line, Industrial projects, Preparing and checking structural shop drawings with B.B.S., Coordination, Methods for constructions, using ISO 9000 - 2000 Prep. of Claims and V.O etc.

Senior Planning Engineer well versed with Primavera, Suretrack, MS Project

Technical office Manager.

Urban Roads and Highway design, Traffic and Transportation planning

Contract Negotiations, Quantity Surveying, Project Handling & Project Implementation, Project Co-ordination

Civil Engineer from REC Kurukshetra, India. Working as Assistant Manager (Civil) with Larsen & Toubro Limited - ECC Division

multi skilled engineer

To offer services as Senior piping designer for onshore and off shore oil and gas projects by using PDMS & PDS 3d model system

Fourteen years of experience in Office Administration, Procurement, HRD, Public Relation and Sales Coordination has energized me to seek suitable position in renowned companies. My quest is to further broaden my horizons so as to facilitate better opportunities to serve &better objective to achieve

Responsible for business development of company & for recruitment of professionals like Project Managers, Engineers, &Technicians for Engineering, & Construction industry in India, Middle East, ,etc.To develop and manage our own portfolio of clients and source the most suitable candidates .

International Weldig Engineer (IWE) , CSWIP 3.1 and Level II(two) Pt,Mt,Ut and RT

Degreed in occupational safety and health, 18 years experience in construction safety, sveral yrs. Overseas exp. Working with multi-national staff. Excellent medical background

Proficient in AutoCAD with 3D applications, Basic knowledge in Microsoft Word, Excel, IntelliCAD.

Experienced Industrial Structural Engineer - concrete, steel - 20+ years, UK & US codes

Metreculation, pree degree, diploma in fire and safety and OASHA

Fresh graduate QS looking for job

I have 25.5 years experience as a professional fitter/welder with 4 years as a certified welding inspector performing visual inspection of welds on pressure vessels, piping, storage tanks and structural components.

7 YEARS OF RIGGER EXPERIENCE

Mechanical techanician diploma

Over 11 years of SAP BW BI experience as a developer, Lead and Manager

Diploma In Mechancial Engineering+NEBOSH Level-3+Environment, Health and Safety Management Specialist Certification from NASP of USA+ ISO 14001:2004 & 9000:2000 Certified Lead Auditor with 15 Years Experience in Oil&Gas as HSE Advisor/Engineer/Supervisor/Coordinator/

Mechanical Engineer Professional experience of 35+ years in Engineering and Project Management

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 [ 37 ] 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out