Resume - 10 years experience in EPC company. Good interpersonal and communication skills,...

Misco Jobs

Resume #52768

CONTACT INFORMATION:
View contact information...

OBJECTIVE
A position in Senior Process Engineer where I can demonstrate my technical and organizational skills and contribute to the company

EDUCATION
1997 University of Indonesia
Bachelor of Science Degree (ST) in Gas & Petrochemical Engineering

WORK EXPERIENCE
PT. INTI KARYA PERSADA TEHNIK (May 1997 - Present) as Process Engineer

HIGHLIGHTS OF DELIVERED PROJECTS:

1. FEASIBILITY STUDY OF EXCESS FUEL GAS & BOIL OFF GAS COMPRESSOR
January 2007 - Present
Feasibility study of fuel gas system modification in LNG Plant

Client: PT. Badak NGL Co.
Plant location: Bontang, East Kalimantan, Indonesia
Role: Lead Process Engineer

Responsibilities:
- Managed all process engineering activities
- Responsible for all process engineering deliverable documents, such as P&ID, PFD and Heat & Material Balance, Process Data Sheets, Philosophy Documents, Lists (i.e. equipment list, line list) and Study Reports
- Performing process simulation for all operation options
- Study & provide the recommendation in final report

2. UJUNG PANGKAH DEVELOPMENT PROJECT (EPC)
December 2004 - Present
144 MMSCFD Gas Processing & 5000 BPD Condensate Stabilization Plant

Client: Amerada-Hess
Plant location: Gresik, East Java, Indonesia
Role: Lead Process Engineer

Responsibilities:
- Managed all process engineering activities
- Responsible for all process engineering deliverable documents, such as P&ID, PFD and Heat & Material Balance, Material Selection Diagram (MSD), Process Data Sheets, Philosophy Documents, Lists (i.e. equipment list, line list), Study Reports and requisitions (i.e. PSV, Hot Oil, Amine Solvent)
- Coordinating of P&ID development
- Designing tray column
- Performing Plant Operating & Control Philosophy and Emergency & Depressuring Philosophy
- Reviewing Operating Manual
- Member of HAZOP meeting
- Supporting construction and pre-commissioning activities
- Technical reviewing for several packages, i.e. Thermal Oxidizer, Fired Heater, Acid Gas Disposal System, H2S Removal System (Amine System), Effluent Treatment Plant, Hydrocyclone and chemical injections (anti foam, pH control)

3. HAZARD & OPERABILITY STUDY for TRAIN A & B BONTANG LNG (Engineering Services)
September – October 2004
HAZOP of LNG Plant

Client: PT. Badak NGL Co. / Pertamina
Plant location: Bontang, East Kalimantan, Indonesia
Role: Process Engineer

Responsibilities:
- Member of HAZOP meeting
- Identifying and investigating of potential hazards and operability problems during plant operation and normal start-up and shutdown
- Process design assessment related with problem finding and solutions

4. GREAT MABRUK DEVELOPMENT PROJECT (Proposal)
May – August 2004
27,000 bpod Oil Treatment Plant

Client: Compagnie des Petroles Total Libye (CPTL)
Plant location: Sirte Basin, Libya
Role: Process Coordinator

Responsibilities:
- Reviewing all process engineering subjects in tender document
- Process design verification by using Hysys
- Coordinating P&ID Development (for proposal purpose)
- Reviewing and verify all equipment design
- PFD and Heat & Material Balance verification (for proposal purpose)

5. INSTALLATION OF ADDITIONAL GAS TURBINE (Engineering Services)
(April – May 2004)
Fuel Gas Modification Plant

Client: Kondur Petroleum S.A. (KPSA)
Plant location: Malacca Strait, Sumatera, Indonesia
Role: Project Coordinator

Responsibilities:
- Managed all engineering service activities
- Coordinating P&ID modification
- Process simulation for plant modification assessment
- Performing study report for plant modification. The report contains recommendation to the Client

6. BETARA COMPLEX DEVELOPMENT (BCD) PROJECT (EPC)
August 2001 – April 2004
100 MMSCFD Gas Processing & NGL Recovery Plant

Client: Petrochina
Plant location: Jambi, Sumatera, Indonesia
Role: Process Engineer / Supervisor

Responsibilities:
- Preparing the technical proposal at bidding stage and reviewing ITB document up to contract award (August 2001 – August 2002)
- Process simulation development
- Value engineering at beginning of the project (placed on Chiyoda corp. office, Yokohama, Japan)
- Designing propane refrigeration system
- Designing heating medium (hot oil) network
- Designing JT-Valve operation mode
- PFD and Heat & Material Balance development
- Sizing and preparing data sheet for all compressors and turbo expander
- Sizing and preparing data sheet for all chillers and plate and frame heat exchanger
- Sizing and preparing data sheet of several storage tanks, drums and separators
- Preparing requisition of heating medium, Pressure Safety Valve (PSV), and Breather Valve
- Technical evaluation of several packages (UOP Membrane Unit, Flare and Thermal Oxidizer)
- Supervision of control valve and pump calculation
- Writing plant operating manual (placed on Chiyoda corp. office, Yokohama, Japan)

7. CENTRAL GATHERING STATION-10 (CGS-10) PROJECT (EPC)
May 1999 – August 2001
Crude Oil Processing Plant

Client: Caltex Pacific Indonesia
Plant location: Riau, Sumatera, Indonesia
Role: Process Engineer / Field Engineer

Responsibilities:
- Sizing of all pumps (centrifugal and positive displacement), Pressure Safety Valves (PSV), Breather Valves, Rupture Disks, Restriction Orifices and control valves
- Preparing Line List and Equipment List
- Performing hydraulic analysis and line sizing
- Checking and reviewing several engineering documents, i.e. general arrangement drawing, isometric drawing and static engineering drawing
- Field Engineering assignment. The major assignment was assist Field Engineering/Construction Manager regarding site modification, coordination of punch list execution, closing of NCR (Non-Conformance Report) joint inspection of Maintainability-Operability-Accessibility (MOA) with client and coordination of as built P&ID.

8. NGL-4 FRACTIONATION & PRODUCT TREATING PLANT (Proposal)
January – March 1999
5100 TPD Gas Processing Plant

Client: Qatar General Petroleum Corporation
Plant location: Mesaieed, Qatar
Role: Process Engineer (all engineering activities were placed on Chiyoda Corp. Office, Yokohama, Japan)

Responsibilities:
- Sizing and preparing equipment load sheet for drums, separators, pumps & compressors
- Preparing Material Selection Diagram (MSD)
- Consistency check for all equipment based on engineering documents

9. KAWASAKI DEVELOPMENT PROJECT (Proposal)
September – December 1998
Gas Processing Plant

Client: General Sekiyu K.K.
Plant location: Kawasaki, Japan
Role: Process Engineer (all engineering activities were placed on Chiyoda Corp. Office, Yokohama, Japan)

Responsibilities:
- Sizing and preparing equipment load sheet for drums, reactors, separators, pumps & compressors
- Preparing Material Selection Diagram (MSD)
- Consistency check for all equipment based on engineering documents

10. Train-H EXPANSION PROJECT (EPC)
July – September 1998
LNG Plant

Client: PT. Badak NGL Co. / Pertamina
Plant location: Bontang, East Kalimantan, Indonesia
Role: Process Engineer

Responsibilities:
- Detail engineering performing in area of Nitrogen Unit, Gas Turbine Generator & Steam Turbine Generator
- P&ID development for the responsible area
- Line sizing and preparing line list for the responsible area
- Checking isometric drawing of all piping within the responsible area

11. TRAIN-A~F UPGRADING (TAFU) PROJECT (EPC)
May – July 1998
LNG Plant (Modification)

Client: PT. Badak NGL Co. / Pertamina
Plant location: Bontang, East Kalimantan, Indonesia
Role: Process Engineer

Responsibilities:
- Reviewing process impact regarding replacement of amine based material from Ucarsol (UOP) to aMDEA (BASF)
- P&ID development for the responsible area
- Staff of HAZOP meeting (as a scribe)

12. FUEL STORAGE SATELLITE "B" PROJECT (Proposal)
March – May 1998
Gasoline Storage Facilities

Client: Pertamina
Plant location: East Jakarta, Indonesia
Role: Process Engineer

Responsibilities:
- Engineering review of tender document
- Storage tank sizing verification
- PFD review & verification

12. SULFURIC ACID & WASTE WATER TREATMENT PROJECT (EPC)
May – October 1997

Client: PT. Smelting
Plant location: Gresik, East Java, Indonesia
Role: Process Engineer

Responsibilities:
- Preparing line list
- Hydraulic check for all system
- Checking all engineering data in P&ID
- Preparing piping test document
- Sizing insulation for all equipment

Additional professional activities
- Guest Lecturer in Chemical Engineering Dept., University of Indonesia (2006)
- Trainer for new process engineer

TRAINING
- On the Job Training in BP Indonesia (formerly ARCO Indonesia), Offshore North-West Java Sea (ONWJ), Indonesia (1995)
- On the Job Training in Bontang LNG Plant, Bontang, East Kalimantan, Indonesia (1996)
- Hysys Steady State Simulation, Hyprotech, Jakarta, Indonesia (1998)
- On the Job Training in Chiyoda Corp., Yokohama, Japan (1998 – 1999)
- Operation Training in Pertamina UP VI Refinery Plant, Balongan, Central of Java, Indonesia (2002)
- Hysys Dynamic Simulation, ASPEN, Kuala Lumpur, Malaysia (2004)* Material Selection Design & Corrosion Assessment, University of Indonesia, Jakarta, Indonesia (2005)

PROFESSIONAL MEMBERSHIP
Indonesian Engineering Association (PII)

REFERENCES
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2601 to 2650 of 4805)

Go to Search Parameters...

Brief Description

Multilingual GIS (Geogpaphic Informational Systems) professional, cartographer

Welder, Mechanic with experience in transmissions, engines and hydraulics. Also experienced in portable line boring.

Welding Engineering

M.Tech Transportation Engineer with 2+ years of experience

Safety Professional, 30 years experience construction, minin, environmental and hazmat

Master in Machine Design engg with 6+ Yrs of Exp in design,Developement & Reverse engg of machine elements and Design Support for Onsite clients.

Caterpillar Dealership, Surface and Undergound Mining Experience.

I am an Indian Mechanical Graduate Engineer with more than six years Multi-dimensional Experience in oil & gas related projects in India & abroad.

I am a highly motivated person who is incredibly conscientious and hard working with an incredible ability to get the job done in adverse conditions and time restraints. The majority of my experience has been working on all types of heavy earthmoving equipment in a vastly changing mining environment

4 year Bachelor of Engineering Graduate Instrumentation Enginee,Automation Software Development for Three level Control System and Modeling the process for the purpose of control system design.

12 years of experience in the contracts and project management in Oil & Gas EPC Projects, including 7 years working in Dubai. MBA ( Finance) graduate from Texas A&M International University and Engineering undegraduate from Cochin University in 1995.

Over three years of experience as an Electrical Engineer with a broad understanding of operations and practices for petrochemical, commercial, and industrial projects, all involving engineering and design of electrical systems. Knowledgeable in AutoCAD and Microstation.

I mastered AutoCAD and installation of pipes for the fire and the fire system. And I was able to work under pressure of time.

Free! As a thorough and outgoing leader known for getting the job done, I am committed to the highest performance and standards. I draw out the best in others, bringing quick resolution to challenging situations. I take good care of my teams, treating them with respect and training them for success.

Spie-capac-Petrofac international limited JV (AGT Azerbaijan Georgia Turkey) oil and gas pipeline project (Tbilisi, Georgia). Position: HSE Trainer

fire and safety engeeneering and fire fighting courses from god

Truck Driver / Construction Superintendent /Customer serves/Quality /Safety Inspector

Structural Designer / Draftsman

I have over 10 years experience in the field of Safety in both the construction and process industries. I have substantial hands on experience working in maintenance, plant shutdowns, and fabrication & installation of Mechanical, Piping and Structural steel work.

I am a Civil/Structural Engineer who has recently been laid off from Fluor Daniel and is seeking new employment. I have with overtime considered at each job, four years of diverse experience as a Structural Engineer

I am M.Tech Welding Engineering graduate with one year of experience in manufacturing industry.Myself specialized with WPS,PQR preparation and i am having ASNT level II certifcate in Ultrasonic Testing.

qa/qc instrument engineer with 4 years exp

QA/QC Welding Inspector & plant inspector

Civil Project Engineer (PMP®) with over 4 years experience in large domain projects.

More than 10 years experience in shipping and logistics as a Project Coordinator and customer services for both local and international 3PL, Shipping & Marine Companies.

3+yrs exp in qa/qc in highway engineering (roadworks)

HYDRAULIC MECHANIC

Quality Assurance/Quality Control COORDINATOR for Oil & Gas Projects (Pipelines, Tanks, In-Plant Piping, Pumps & Compressors Installation)

Seeking full time employment with a construction company who is need of a Loader Operator. Doesn't matter where I'm willing to move.

Looking for a plumbing position overseas

I am ambitious, hard working, challenge orientated and enjoy problem solving. I am able to work within a group or by myself.

Working as a Project Engineer since 1992.

Environmental Specialist and Project Manager, with over 18 years of experience in the Infrastructure developkent projects.

NDT/QC UT Level III, prior RT/MT/PT/VT Level III. 25+ years experience in inspection in power, oiland gas and construction

Master's in Engineering and MBA + 28 years Global Multidiscipline Projects Engineering Management Experience

Global Sourcing, Program Management & operations management specialist with over 16 years of experience with ITES Consulting (4 years plus) & manufacturing industries (12 years. Contributed to improve profitability of various business organizations through “Spend Management” & “Supplier Relationship

Skills And Qualifications

CAD Manager for Microstation and AutoCAD

Seeking Middle Level Managerial assignments in Business Development / Channel Management / Sales & Marketing with a FMCG, Automobile, Beverages oriented organization PROFESSIONAL SYNOPSIS A dynamic professional with over 4 years of rich experience in Sales & Marketing, Business Development, Chann

An experienced E&I construction supervisor/superintendent, three years college to city&guilds grade,five year apprenticeship, experienced in onshore and offshore E&I construction and maintenance, excellent communicator

Rigger

Operating all sizes and makes of excavators,dozers,backhoes,front end loaders,track loaders,scrappers,rollers,skidsters,mini hoes,bobcats,small blade,boom trucks,and hydro axe.Able to obtain all info. from blue prints and/or site plans.Capable of passing inspections foundation,building,and final.

Corrosion Control; AutoCAD drafting; Estimating; Material order; Microsoft Office; Mechanic and Architecture drafting;

10.5+ years experience EDP /ERP /IT Manager VB+SQL+ORACLE+FOXPRO

10 years experience in EPC company. Good interpersonal and communication skills, experienced as a Lead Process Engineer, HAZOP member and Field Engineer, advanced ability in value engineering, P&ID, PFD, process simulation, feasibility/conseptual study and other detail engineering

Very experienced in systems / instrument commissioning / maintenance

Qualified Electrian in UK, Worked in Petro-Chemical Industry, Supervisor, Electrical Consultant for large Bank

CISRS Registered Advanced Scaffolder, CITB Registered Advanced Scaffolder, Brunei Shell Worksite Supervisor Cert, CITB Inspection Cert, ECITB Passport to Safety.

Electrician and Electronics Technician, with military and civilian experience

Experienced construction project manager with a finance and business management background.

First Prev 51 52 [ 53 ] 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out