Resume - I have educated all levels of staff, lowered lost time cases and injury rates, r...

Misco Jobs

Resume #566

CONTACT INFORMATION:
View contact information...

Qualifications for: Safety, Health & Environmental Manager

PROFILE: Expert in OSHA, EPA, DOT and ANSI. Construction & Manufacturing Safety (29CFR, 1926 & 1910), Environmental Protection, Ergonomics, Chemical Management, Accident/Incident investigations, Job site & Regulatory Inspections/Audits, Risk Management, Workers' Compensation, RCRA, SARA, Training/Program Development, Hazardous Waste/Materials,
Multi-Site Operations, Behavioral/Process Safety, Fleet/Driver Safety, Lock Out/Tag Out, Confined Space, Waste Water Treatment, Start Up Operations, Needs Assessment, Power Plant EHS (fossil fuel, co-gen, bio-mass), Field Services Engineering. Computer literate.

11-99 - Present
Independent Contractor and Contract Employee
Clients/Companies including TMP, Spec Group, NJ & Associates.

Safety Manager: Responsible for all safety operations while representing IPP owner involving contractors and subcontractors providing electrical, mechanical, civil, piping, erection and commissioning activities. Massachusetts location: 580 MW combined cycle power plant from start-up through commissioning with union labor.

Safety Consultant: Responsible for the review of programs, policies and procedures of Safety/Regulatory program for a heavy construction business with multiple locations throughout the state of Florida to ensure compliance in all areas of (29CFR 1926).

Senior Loss Control Consultant: Conduct risk evaluations, job-site/plant safety audits and complete reports to determine rating for potential coverage through premier insurance carriers providing workers' compensation. Review accident reviews and analysis, physical surveys, review of safety/loss control programs, potential exposures, etc.

Safety Manager/Superintendent - Night Shift: Responsible for all safety operations while representing IPP owner involving prime/general contractors and up to 10 subcontractors providing electrical, mechanical, civil, piping, erection and commissioning activities. Massachusetts location: 560 MW combined cycle power plant from start-up, mobilization through commercialization with union labor.

Safety Engineer: Responsible for all safety operations while representing IPP owner involving prime/general contractors and up to 10 subcontractors providing electrical, mechanical, civil, piping, erection and commissioning activities. Texas location: 1,100 MW combined cycle power plant from start-up, mobilization through commercialization with non-union labor.

1998 - Oct. 1999
Sr. Training Coordinator
Enron Corp., Houston, TX

Coordinated the creation and presentation of regulatory and technical training for a 2,000-mile natural gas pipeline business at fifteen+ (15+) locations throughout the state of Florida.

1995 - 1998
Director of Risk Management
Northeast Health, Troy, NY

Created and led risk management operation for healthcare system (approximately 30 facilities); developed and administered health, safety and training programs and emergency preparedness protocols resulting in successful OSHA inspections and JCAHO/DOH surveys. Directed workers' compensation program: committee chair for accident investigation/resolution, claims administration through third party consultant, insurance review and preparation of insurance bid packages (wc, general liability, automotive, etc.).

1991 - 1995
Loss Control/Workers' Compensation Manager
General Electric, Schenectady, NY

Developed and administered both tactical/strategic Workers' Compensation and Risk Management programs for the Power Generation Services, Power Plant Systems (Construction Services) and Product Services business units with 25+ locations involving over 5000 union, non-union and contract workers across the U.S., Europe and Asia. Developed and implemented 24-hour emergency pager system for Department EHS Personnel. Led effort to create and distribute new EHS manual in both hard text and CD ROM. Reduced lost time cases: 50% first year and 80% second year resulting in $3MM refund from insurance carrier.

1988 - 1991
Environmental, Health & Safety Manager
General Electric, Schenectady, NY

Created and directed an Environmental, Health & Safety Program for the Power Generation Services, Power Plant Systems (Construction Services) and Product Services business units with 25+ locations and 5,000+ union, non-union and contract workers. Coordinated and led active communication plan between field locations and EHS department to ensure correct implementation of EHS policies & programs; conducted audits of the Regions, Districts and O&M facilities and implemented corrective action plans.

1985 - 1987
Environmental & Safety Engineering Manager
General Electric, Madisonville, KY

Developed and coordinated all environmental and safety operations for three shift Aircraft Engine manufacturing facility of 800+ union, non-union and contract workers. Administered HAZCOM training; successfully passed two OSHA inspections in 1986; successfully passed GE/COR Safety audit; managed 600K-unit budget.

1980 - 1985
Plant Engineering Manager
General Electric, Madisonville, KY

Led industrial, mechanical, plant engineering functions of heavy CELL manufacturing facility; managed all Security & Plant Protection Operations. Administrator of plant workers' compensation programs; developed industrial hygiene program. Created/administered training programs for safety, environmental and fire protection; changed classification from major source to minor source through EPA; coordinated all tool/tool crib activities; supervised building maintenance.

1978 - 1980
Senior Environmental Engineer
Bendix Corporation, St. Joseph, MI

Responsible for instituting preventative maintenance programs and training procedures for all environmental equipment. Duties included all liaison activities between state DNR and EPA Divisional responsibilities for all environmental programs.

1977 - 1978
Project Engineer
General Motors Corporation, Saginaw, MI

Responsible for all emissions systems within plant.

EDUCATION: BS - Mechanical Engineering, Maine Maritime Academy - Castine, ME

Willing to travel

References available.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 451 to 500 of 4757)

Go to Search Parameters...

Brief Description

HSE engineer

Cement Production Supervisor // Senior Cement Process Engineer //

Mechanical engineer having a vast experience in general management for the vehicles fleet management, construction equipments, ground equipments with the most succesful profit and loss bases.

Materials, Warehouse, Asset, Logistics Management

Power Plant Erection/Maintenance /Warranty Engineer

I'm having good knoweldge of Land Survey work and having sound knowelge of Microsoft Excel which is very much useful in estimation works

Geotechnical Engineer & Ph. D in Civil Engineering with 15 years experience work as University Researcher and Mainly as Freelance Expert-Consultant.

Surface Sciences, Polymer Chemistry and Physics, UHV Techniques, Materials Sciences, Thin Film, Single Crystal.

Results orientated, hands on multitasked, multifunctional, dedicated manager. experienced in materials. Systems, logistics, & operations management. I am the go to guy to save you from losses in time or money. Please e- mail or call me so we can get together on filling your current opening.

Civil Engineer

Senior Structural CAD Designer (direct & contract assignments)

I'm currently working at Doha, Qatar as a document controller for construction company.

QS experienced within building and civils, 31yo, 10yrs experience.

BBA Construction Management - Project Controls Specialist

Quality control manager - BE Metallurgy - Looking after all quality complaints, Metallurgical testing

Solution support engineer

I am an enthusiastic dedicated person. I have the ability to work alone or in a team environment to complete any given task with utmost care and competency. Ensuring that all tasks are properly planned, to achieve the highest level of safety as so the tasks can be executed incident free

Formally Educated in Architecture, Construction studies & Computer Aided Design. Programmes: Auto Cad versions R14 to 2008, Architectural Desktop, Micro GDS, 3D Viz, 3D Studio MAX 2009, Photoshop CS3. Green Building Council Australia Accredited Professional. Small Business owner.

Providing detailed site identification information with the understanding of the technical, engineering and criteria determined by the client.

heavy equipment operator for over 25 years. Have many skills in heavy highway construction, mining of gravel pits, haul trucks, bull dozers, blades,trackhoes, etc.

Material Management Professional.Vast experience.

30 years expierience in concrete, commercial, residential.

PDS EERWAY Duct Bank, Cable Tray and Embedded Conduit Layouts

I would like to apply for the position of an Ship yard technician, Onshore/offshore entry level roughneck, roustabout My experience: Stick, mig and tig welding Burning equipment Current certifications Fork lift operator I am a self-motivated, honest, individual with effective communications skills

i have worked with many multi national firms.I want to obtain a position of Plant manager/Maintenance manager/Service manager in your company. I have done courses under shell company Safety awareness. Incident and injury free. Defensive driving. Safety induction.

Project Engineering, Construction, Contracts, Commissioning, Start Up.

More than nineteen years in the field of construction,some engineering & design works for oil& gas, petrochemical, power plant, expansion, revamp projects.

Over 20 years of experience in diesel engines ,marine propulsion system and generator set working in the middle east and gulf region for more than 15 years U.A.E and Saudi driving license a valid resident in U.A.E read ,write ,speak English , Arabic ,German

Senior Project Architect with extensive construction supervision and design experience willing to relocate to overseas/Middle East

-Mechanical Engineering, member of ASME, PMI, -computer skills include Primavera Project Planner & MS Project. -Sr. Maintenance/Project Planning/Scheduling Engineer -long experience in Oil & Gas Industry -Project Controls Engineer/Manager. -Fluent in English & Arabic. Canadian Citizen.

I'm presently working as Planning/Scheduler and at the same time Quantity Surveyor here in Yanbu, Saudi Arabia. Our on going project is the Royal Commission Field Office and 4 bridges.

Hard dollar Mechanical Estimator/Project Manager experienced with Estimation and Quick Pen seeks West Coast Position.

21 year professional with experience in safety/operations turn arounds, business development, strategic planning, government regulations, P&L, Construction Equipment Operations/Maintenance and Construction Management.

Represent corporation at the regional / local level. Administer local contracts, interface with clients, assist with field issues, transportation, housing, energy. Fluent in ARABIC, ITALIAN, GREEK, SPANISH, ENGLISH. Knowledge on Libyan culture, customs, religion, geography, and geopolitics.

Am immediately available. I have 23-years Safety and Health experience, including: * 12-years in Production * 20-years Consulting/Training * 6-years in Construction Other experience: * 7.5-years Criminal Justice/Anti-Terrorism. * 26-years Emergency Medical Technician (EMT).

Performed conceptual design, design devel, work drawings, specs. Recent emphasis has been more on managing teams of architects and engineers, coordinating documents and specifications. Major strength is producing quality documents and teaching others to produce high quality work.

Experience and skills: 1) Electrical Engineering, HT & LT systems, power systems, instrumentation and control. 2) Projects' management. 3) Service and customer support. 4) Sales and marketing. Worked for 3 years in Nigeria in various construction projects.

20+ years Civil Engineering experience on Public Works, Utilities, Industrial, Commercial and Residential projects. Experienced in streets, highways, water systems, sanitary & industrial sewers, airports, site development, grading, drainage, underground piping and specifications

Professionally qualified Civil Engineer with a PG degree in Construction Management with over 20 years experience in Asian Development Bank, World Bank and Other Internationally funded road projects in South East Asia and Pacific region.

I have educated all levels of staff, lowered lost time cases and injury rates, reduced workers' compensation costs and resulted in positive inspections on many levels - OSHA, EPA, DOT, ANSI, JCAHO and DOH.

Professional Electrical Engineer with 30+ years experience. In the latter 20 years my experience has been in a wide range of areas of project engineering predominantly in heavy industry. Looking for new challenges any location

Project Manager

10+ years of experience in the field of GIS & construction industry with wide ranging domain and industry expertise.

Manager for techno commercial jobs in mining machinery

Business Plan Modeling, Project Management, Motivational Team Leader

ESTIMATING, PROJECT MANAGEMENT,HEAVY EQUIPMENT OPERATOR, UNDERGROUND UTILITIES

Over 20 years managing equipment. Large tunnel, heavy civil jobs and managed jobs across state and states. I have been involved in training and presentations to improve and maintain safety and service. I enjoy a challenge and enjoy reaching goals and working with a team or teams to reach a common go

Management

I am 46 years old, hardworking and trsupervision. Seeking permanent employment overseas. ie: Dubai.ustworthy. My attendance is 100%, never having had any sick time from my work in 25 years of full time employment. I can use my own initiative, and am able to work without supervision.

pressure welder

First 1 2 3 4 5 6 7 8 9 [ 10 ] 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out