Resume - A specialist in rock mechanics and engineering geology. 26 years tunnelling and...

Misco Jobs

Resume #5700

CONTACT INFORMATION:
View contact information...

EDUCATION & B.Sc., Geology (Honours), University of Wales, 1976.
QUALIFICATIONS M.Sc., Rock Mechanics and Excavation Engineering,
University of Newcastle-Upon-Tyne, 1982.
Chartered Engineer

AFFILIATIONS Member, Institution of Mining and Metallurgy.
Member, British Tunnelling Society
Member, International Society for Rock Mechanics

DOB March 23, 1954

POSITIONS

1992 to date Independent Rock Mechanics Engineer

1991 to 1993 Rock Mechanics Team Leader, Travers Morgan UK.

1985 to 1991 Senior Rock Mechanics Engineer, Golder Associates, Seattle, USA.

1982 to 1985 Senior Geotechnical Engineer, Howard Humphreys, UK.

1980 to 1981 Assistant Resident Engineer, Howard Humphreys, Kenya.

1979 to 1980 Engineering Geologist, Howard Humphreys, UK.

1976 to 1979 Assistant Geologist, James Williamson and Partners, UK.

EXPERIENCE IN UNDERGROUND EXCAVATION ENGINEERING

Byera Hill Tunnel, St Vincent, West Indies (ongoing): Site survey, geotechnical analysis and ground support design for rehabilitation and widening of a 19th century road tunnel in weak volcanic deposits. Included preparation of 3D ground model in Autocad and Terra Firma, quantities take-off, and preparation of construction drawings and specification. For Shotcrete Ltd.

Moorcroft Quarry Tunnel, Plymouth: Geotechnical risk analysis, excavation method assessment, settlement estimates, and tender ground support design/cost analysis for a quarry access tunnel in strong limestone with very shallow cover beneath a public road. For Skanska Cementation.

Elm Park Mine, Wiltshire: Mine condition survey, geotechnical data collection, rockmass strength assessment and crown pillar stability analysis for abandoned limestone mines below a proposed surface development. Advise on long-term stabilisation options. Private client.

Health & Safety Audits, Azerbaijan: Health and safety audits of excavation works at various BP (AIOC) sites in Azerbaijan. For ACONA.

River Exe Estuary Crossing: Provide outline design, geotechnical interpretative report, engineering risk analysis, advice on excavation and ground support methods, and cost estimates for a proposed gas pipeline tunnel below the Exe estuary. For Transco.

Cigar Lake Mine, Saskatchewan: Provide expert appraisal of ground conditions, crown pillar stability and mining methods in connection with an insurance loss in an underground uranium mine. For SubTerra Inc.

Las Vegas Wash Tunnel, Nevada: Feasibility-level geotechnical review, conceptual layout and preliminary cost-estimate for a proposed sewer tunnel including river under-crossing. For Converse Consultants.

White River Under Crossing, Washington: Feasibility-level geotechnical review, conceptual design and site investigation planning for proposed gas pipeline EPBM tunnel. For Williams Gas Pipeline Inc.

Strood Railway Tunnel Refurbishment: Design check for a proposed rockbolt and shotcrete support system for stabilisation of a railway tunnel in chalk. Including kinematic analysis, ground-support interaction analysis, and finite element analysis to verify probable loadings and adequacy of the proposed support system. For London Mining and Minerals Consultants.

Busted Butte Unsaturated Zone Test Facility, Nevada. Rock mechanics analysis and support design for access tunnels and test caverns; rock support, design and rockfall hazard assessments for portal zone.. For Los Alamos National Laboratory.

Deep Palaeozoic Project, Round Mountain, Nevada. Assessment of remedial measures for stabilisation a section of over-stressed squeezing and swelling ground in a mine access tunnel. Advised on support options and improved blasting practices to reduce perimeter damage. For Round Mountain Gold Corporation, Smoky Valley Common Operations, Nevada.

Roughcastle Millenium Link Tunnel, Falkirk: Advice on geotechnical hazards, investigation and stabilisation options for abandoned shallow mine working beneath proposed canal tunnel route. For London Mining & Minerals Consultants Ltd.

Birches Head Sewer Scheme. Tender geotechnical interpretation of site investigation data for proposed sewer tunnel, Stoke-on-Trent. Advised on geotechnical risks and produced probabilistic model of roadheader excavation rates. For Costain Tunnelling Division.

Barbados South Coast Sewerage Scheme. Tender geotechnical interpretation of site investigation data for proposed sewer tunnels and pipelines. Advised on geotechnical risks and excavation rates for microtunnelling. For Thrustbore Contractors Ltd./Soares de Costa.

White City Project. Investigation of causes of cracking of tunnel lining segments, Central Line, White City to Shepherds Bush stations. Including detailed investigation of crack distribution, site geology, historical land-use and WW2 bombing. Probabilistic analytical and empirical models were developed that demonstrated a very high probability that observed cracking is due to bomb impacts. For London Underground Limited.

Yucca Mountain Project, Nevada. Review of TBM performance during excavation of repository access tunnels. Correlation of performance data with geotechnical and geological factors, and comparison with probabilistic performance prediction models. For SubTerra Inc.

Limerick Main Drainage Scheme. Tender geotechnical interpretation of site investigation data for proposed sewer and drainage tunnels and shafts. Advised on geotechnical risks, excavation method selection, blasting and temporary works, programme estimates, and site monitoring. Interpretation of trial blast data, development of site laws for prediction of far-field vibrations for tunnel and shaft excavation. For ASCON, Ireland.

Jersey Stormwater Project. Analysis and interpretation of site investigation data, and prediction of ground conditions for tunnels, caverns and shafts. Comparative analysis of expected and encountered geotechnical conditions. Back-analysis and simulation modelling of TBM, raise-bore, diamond drilling, and percussion drilling performance to quantify the effects of unforeseen ground conditions. Detailed analysis of pre-contract trial blasts, blast designs, and production blast monitoring data (including ground vibration and air-overpressure). Review of overbreak and percussion drilling performance with reference to structure and unforeseeably high rock strength. Preparation of expert reports in support of contractual claims. For Balfour Beatty Major Projects.

Plymouth Sewage Treatment Scheme. Geotechnical analysis in support of contractual claims arising from blast vibrations and structural over-break in a wide range of ground conditions. This project involved detailed analysis of blast monitoring data, diagnostic vibration monitoring, and comparison of expected and encountered geotechnical conditions. A report was prepared demonstrating that levels of blast vibration and resultant over-break were well in excess of what could have been expected at tender. For Costain Tunnelling Division.

RCF Science Design Project (Sellafield RCF, Cumbria). Detailed design of tests to monitor the coupled hydraulic and mechanical response of a rockmass to shaft excavation. Rock mechanics modelling; instrument selection and specifications; instrument array design; test design and sequencing; preparation of detailed technical procedures (Quality Plans); and input to DAS design. For GIGA Joint Venture Ltd.

Dover and Folkestone Wastewater Transfer Tunnel. Alternative design for a 3m diameter 1500m long waste water transfer tunnel in chalk on behalf of the works contractors. This resulted in mitigation of environmental problems and significant cost-reductions compared to original design. For Edmund Nuttall.

Pongkor Gold Mine, Indonesia. Preparation of outline designs for stope and development blasting related to mining of the Curig Vein, including planning documents and specifications for diagnostic monitoring and blast optimisation, and training of mine personnel in these specialist techniques. For Aneka Tambang Perseo.

Data Acquisition Manager, UK Nirex. Seconded to UK Nirex Ltd to advise on the underground testing programme for the proposed Rock Characterisation Facility, Sellafield, including; instrumentation systems, automated data acquisition, test design and technical procedures; management and contractual issues; programme and budget estimates. Technical manager for the preparation of position statements for public enquiry, including shaft blasting and monitoring method statements. For UK Nirex Ltd.

Blast Monitoring Training, Turkey. Presented short course on prediction and monitoring of blast vibration, arising from tunnelling and construction, for engineers of Devlet Su Isleri (Turkey's national dam authority). The course included blast design principles, explosive characteristics and initiation systems; design and monitoring of trial blasts; prediction of near- and far-field vibration; and field training in instrumentation and data analysis, including practical monitoring of construction blasts at Omeru Dam. For DSI.

Tunnel Risk Analysis Research Programme. Technical manager and principal report author for a research programme on the application of quantitative risk-analysis methods to highway tunnelling projects in the UK. For Transport Research Laboratory/UK Dept. of Transport.

New York Low-Level Radioactive Waste Repository. Re-assessment of Mined Repository Option for this project, including long-term stability assessment for excavations in limestone, salt and shale lithologies, and review of longevity of engineered components. For State of New York LLWSC.

Pen-Y-Clip A55 Road Tunnel, Wales. Rock Mechanics Team Leader; supervision of tunnel geotechnical staff; review of geotechnical data collected during construction; stability analysis and review of design support; rock support and instrumentation detailing; analysis of monitoring data; assessment of ground related contractual claims; risk-based assessment of future support requirements, including cost and scheduling implications. For Welsh Office.

Swansea Bay Sewage Disposal Scheme, Wales. Feasibility study for Underground Caverns Option, including recommendations for site investigation, preliminary support design and costing, and assessment of excavation methodology (roadheader vs drill and blast). For Welsh Water

Alder Lake Dam, Washington. Feasibility study for emergency spillway tunnel to mitigate potential catastrophic effects of major valley side failures in an area of active landslides; the study also assessed the feasibility of selecting a tunnel route such that it could be used as a landslide drainage gallery. For Tacoma Public Utilities.

Southport Deep Shaft, UK. Rock mechanics analysis and design of shaft linings in 8m diameter shaft in shale and rock-salt, including analysis of creep effects on long-term loads and stability. For North West Water.

Denali Mine, Alaska. Ground investigation, rock support design, specification preparation, and cost analysis for a river diversion drop-shaft and tunnel in glacial materials and granodiorite, with permafrost horizons. Valdez Creek Mining Co.

American River Crossing Project, California. Feasibility study, probabilistic risk analysis, and cost estimates for three alternative highway and rapid-transit tunnel routes below American River, Folsom, California. For Harland Bartholemew and Associates.

Montana Tunnels Project, Butte, Montana. Review of development blasting practices in a mine access drift with severe water ingress, over-break and misfire problems. Provided advice on blast design modifications including smooth blast design, and diagnostic monitoring to identify blasting problems, improve productivity and reduce costs. For New Butte Mining Co.

New York Low-Level Radioactive Waste Repository Project:

o Conceptual design and long-term stability assessment for mined low-level radioactive waste repositories at five candidate-sites in New York State, including review of failure mechanisms, creep closure, and waste package design.

o Feasibility study and cost-estimates for Mined Repository Option, New York State low-level radioactive waste disposal facility, including development and application of screening criteria for abandoned and operating mines, conceptual level study of potential new mine sites, development of a mining cost model, and probabilistic assessment of excavation system performance.

Elmhurst Quarry, Illinois. Review of blasting procedures in an underground limestone mine. Advice on blast design modifications for improved stability/reduced pillar damaged, and improved dimension-stone quality. For Chicago Stone Co.

San Raphael Quarry, California. Review of geotechnical information for a proposed sub-marine extension of an underground quarry in sandstone

Yucca Mountain Radioactive Waste Repository:

o Preparation of Test Support Requirements Document. Involved coordinating technical input from a multidisciplinary group, and defining support and interface requirements for a major underground in-situ test program. Los Alamos National Laboratory.

o Participated in workshop on excavation method selection for the Yucca Mountain Project. Involved presentation on the impacts of different excavation methods (drill & blast, roadheader, TBM) on geologic mapping data quality.

Wells Creek Hydroelectric Project, Washington. Site investigation, feasibility study and preliminary rock support design for underground power station, shaft and tunnel. For Hosey and Associates Engineering Company.

Republic Mine, Washington. Preliminary geotechnical assessment, rock-support design and cost-estimates for a mine access shaft. Advice on blast design modifications to improve productivity and reduce production costs in a narrow-vein slusher operation. For Hecla Mining Company.

Monarch and Dominion Mines, Oregon. Advised on excavation and ground-control methods including smooth-wall blasting, bolting and shotcrete support systems. For Western Consolidated Mines Inc.

Owyhee Hydroelectric Project. Resident Rock Mechanics Engineer for construction of an underground power house, shaft, penstock and tailrace tunnels. Supervision of curtain grouting. Installation and monitoring of piezometers, extensometers and convergence arrays. Advise on dam abutment stability and remedial measures. Design of blast rounds for close proximity blasting adjacent to existing reservoir valve tower and control gear. Responsible for all geological and rock mechanics aspects during construction. For Owyhee North Board of Control.

Laurie Sheds Tunnel, British Columbia. Feasibility study for a railway tunnel invert lowering project including analysis of lining and subgrade response, estimation of groundwater inflows, and investigation of concrete cutting technologies. For Canada Pacific Railroad.

San Manuel Mine, Arizona. Blast diagnosis and optimization studies in an underground block-caving mine, using advanced blast vibration monitoring techniques. This project involved instrumentation of test and production blasts in the trench cut and development headings (trench and draw drifts), development of blasting patterns and practices, and optimization of the drilling and blasting programs for this large block-caving operation. For Magma Copper Company.

Cannon Mine, Wenatchee, Washington. Blast monitoring studies for a sublevel blasthole stoping and backfilling operation. This project involved monitoring of underground bench blasting operations using instrumentation installed underground and at the surface. The objectives of minimal rock wall damage and far field vibration reduction were achieved along with drilling and explosives consumption. For Asamera Minerals'

Deaf Smith High-Level Radioactive Waste Repository, Texas.

o Preparation of Test Interface Specifications for the proposed salt high-level waste repository ESF; involved defining subcontractor support and interface requirements for shaft and at-depth study programs.

o Thermomechanics Team Leader. Design of instruments, instrumentation systems, ADAS, and test procedures for use in high temperature, corrosive environment; including thermal conductivity probe, rock and lining temperature monitoring; bitumen pressure cells, and shaft rock mechanics instrumentation (MPBX, convergence, steel and concrete stress measurement).

o Co-Author of Data Management Plan. Included development of QA/QC procedures for managing multi-media data flow from a diverse range and large number of in situ tests and demonstration projects.

Pen-y-Clip A55 Road Tunnel, Wales. Field mapping, site investigation and field testing; preparation of factual, interpretative and engineering reports; design of tunnel and portal rock support; rockfall hazard assessment; comparative assessment of costs, quantities and project duration for alternative tunnel alignments. For Welsh Office.

Penmaenbach Railway Tunnel, Wales. Mapping and inspection of lined and non-lined sections of a 19th century railway tunnel. Assessment of pre-reinforcement and monitoring required during the driveage of an adjacent road tunnel. Design of blast monitoring programme. For Welsh Office.

Solva Sewage Treatment Works, Wales. Access tunnel rehabilitation and widening project including assessment of remedial measures, excavation methods, support requirements, cost and quantities. For Welsh Water.

Greater Athens Liquid Waste Disposal Project. Feasibility study for tunnelling in a drowned karstic rockmass, Keratsini to Psitallia Island submarine sewer tunnel. For World Bank/Ministry of Public Works, Greece.

Chania II Project, Kenya. Supervision of tunnelling and civil works; engineering geological mapping and instrumentation of tunnel headings and dam foundations; stability analysis and rock support detailing; supervision of support installation and lining operations and dam curtain grouting; establishment of inspection procedures with special reference to tunnelling machine performance and groundwater. For Nairobi City Council.

Dinorwic Pumped Storage Project, Wales. Engineering geological mapping of shaft, tunnels and caverns in-line with heading and benching operations, stability analysis and rock support detailing; testing and monitoring of support systems and blast vibration monitoring; surface site investigation and mapping, and rock slope stability analysis. For CEGB.

PUBLICATIONS

Breeds, C.D., Mills, R. and Conway, J.J. Mine Subsidence and Rockfall Hazards: A Case Study from Northwest Colorado, Paper presented at the 1997 Annual AEG Conference, Portland, OR.

Conway, J.J., Breeds, C.D., and Hammett, R.D., "Optimization of Underground Blasting", Intermountain Mining Symposium, North West Mining Association, Elko, Nevada. October 1989.

Breeds, C.D., and Conway, J.J., "Rapid Excavation", Chapter 22, SME Mining Engineers Handbook, 2nd Ed. American Institution of Mining Engineers. 1993.

Littlejohn, G.S., and Conway., J.J., "A Simple Device to Control Rockbolt Tensioning" In Tunnels and Tunnelling

Conway, J.J., "Application of Risk-Assessment In Tunnel Feasibility Studies" In 'Risk and Reliability in Ground Engineering', ICE, London, 1993.

Conway, J.J., Goodfellow, R.J.F., and Bowers, K.H., "The potential application of risk analysis to highway tunnel construction", TRL Project Report PR/CE/110/95.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 301 to 350 of 4814)

Go to Search Parameters...

Brief Description

MEP Professional Engineer with advanced Management Knowledge For High Rise Building

I have 20 years of experienced in the field of Quality Control, Material Engineering and Construction Supervision in Heavy Construction such as: PetroChemical industries, Pipelines, Infrastructure, Highrise Building, Commercial Mall, Sewage Treatment Plant, Pumping Station, Milk Processing Plant etc

Extensive experience in project mgmt, tool,fixture, & machine design

I am having vast experience (22 Years) in Maintenance & Projects and in diverse fields. I am suitably qualified (BE, ME, PGDM, PGDIT) to take up any challenging assignments across the globe.

Civil Engineer. Management in RCM Reliability centred Maintenance.

Electrical engineer - building electrical design and rapid transit systems; proposals and specifications; CAD.

Senior mechanical engineer with experience in engineering for material handling, industrial installations and conveying machines in steel industry, mining, cement & chemicals. Start-up assistance for steel industry.

Close supervision of projects handle and monitoring

I have masters in Water Resources Management followed by Bachelor of Engineering. Skills in Construction management,people management,sub conatractor mangment,quality control,health and safety

A result oriented and self-motivated M.Tech Civil Engineering Professional with over 18 years of rich & qualitative experience in Project Management, Civil Engineering and Construction Management of infrastructure projects including Airport Terminals, Buildings Roads and Flyovers.

Engineer Graduate with 09 years experience in Automotive Field as Sales ,Warranty, Technical Engineer

Over 25 years in the construction industry

HEALTH, SAFETY & ENVIRONMENT SPECIALIST WITH 20+ YEARS OF EXPERIENCE

Senior structural engineer with 15 years experience. National Diploma (Civil Engineering)Bachelor of Technology (Structural)

Auto Electrical / Mechanical/ heavy vehicles, Cat, Deutz, Comatsu, Man, M/Benz, Feul rail engines, Airconditioning, Hydraulics, Electrical repair on all types of vehicles, Mining vehicles.

B.Sc.1977, V.G. Honours, M.Sc.1985. Consultant and Executive Director (> 40 Transport & Railway projects). Teach Transport Planning, Railway Eng. & Applied Statistics & Eng. Systems for undergraduate, Faculty of Eng., Cairo Uni. DOS, Win., AutoCad, MSOffice. Organizing the 3rd CODATU-III Conference

APPLIACATION FOR THE POST OF JUNIOR CIVIL ENGINEER.

I am a creative civil engineer and construction inspector, with diverse multi disciplinary experience in reinforced concrete, pre-stressed concrete, precast concrete, structural steel and timber construction. I am well versed with all aspects of project management from inception to completion.

Project Manager: Responsible of the coordination and execution of the following projects: • Warehouse Management System (Oracle WMS) • Overall Revision to the actual ACP Master Catalog . Inventory Re-engineering Program

Welding(certificates). Electrical, mechanical, hydraulic and pneumatic equipment, installation, (30MPa certificate). Workplace Safety & Health field (Certificates). Staff training and retraining. Drawing and reading blueprints and schematics. Robotics. Repair. Maintenance. Management. Sales.

A specialist in rock mechanics and engineering geology. 26 years tunnelling and mining experience. Expertise in stability analysis, support design and monitoring; blast design and optimisation; TBM and road header performance; risk analysis.

25 YEARS OF MANAGING & BUILDING A/E PROJECTS EXCEEDING $ 600 MILLION BS & MS - CONSTRUCTION MANAGEMENT - MINOR IN CIVIL ENGINEERING - 4:00GPA FORMAL EDUCATION IN ARCHITECTURE -QUALIFIED WITH A.R.E IN THREE STATES

I am an experienced AutoCAD operator / draftsman with expertise on mechanical, structural, civil and electrical drawings, using Autocad 2009. I have eleven years of extensive hands-on work experience in a manufacturing as well as construction set-up.

I have vast experience in the Safety related field.

Installation of electrical pipe,electrical wiring,electrical controls,electrical panel board.Installation of main over current protection,lightings,switches.Banking of transformers and splcing of wires.Installation of A.C. electric motors,magnetic contactor.Installation AHU,ACU,FCU,colling tower

 Project Management; Demand Forecasting; Simulation & Analysis Packages/Models

I am a professional Mechanical Engineer with 20 years Gulf experience with MEP services in building construction..

PROFILE:A Piping/mechanical superintendent with 13 years experience in the petrochemical & construction industries in Middle East. Proven leadership skills involving managing, developing and motivating teams to achieve their objectives. First-class analytical, design and problem solving skills. Good

Welding Technologies, Technical assistance, Workshop, site, AutoCAD, Tekla Structures, XSteel, SolidWorks, MS Project

Looking for a long term contract or permanent challenging position worldwide, utilizing broad - based experience in projects maintenance– Maintenance manager, Supervisor, Team leader – Air Traffic Control, Industrial projects, Telecommunications.

CM Support of (3) State and Federally funded highway projects (2) Govt./Military Construction Projects; (1) Hi-Tech Facil. Control Upgrade; (3) Hospital Projects. (2) New civil underground water, gas, sewer and (3) major telecommunications infrastructure proj (2) Environmental – Remediation projects

Senior Hydrogeologist

Formal studies in civil engineering, information systems, business management and project management have provided me with extensive technical and financial expertise together with proven planning, coordination and control skills.

Twenty-five years in quality management including operations management, budget and manpower planning, supervision, project execution, quality system implementation, auditing, coordination and training during design, procurement and construction of international energy and petrochemical projects.

Senior Mechanical Engineer (M.Sc.) having experience as plant manager and project manager, specialist in mining, safety glass, manufacturing plant and brewery investments.

Mechanical engineer with design and project engineering experience. Proficient Designer with over 10,000 hours total CAD experience including Autocad 2002, and some Microstation. Extensive experience in mechanical systems design, product design, as-builts, and fieldwork.

I have over 15 years of experience in construction management. I have expertise in contract negotiations, budgets, multi-tasking, leading teams of employees, EPA and OSHA, and many other areas.

Commercial Real Estate Agent, Construction Project Manager, Business Development Director

My education qualifications, career training, knowledge and acquired skills would be suited to position in your company (Former Soviet Union: Kazakhstan, Russia).

Qualified & Experienced Design Engineer Looking for New Challenge.

A reliable, enthusiastic and confident candidate with post graduate qualification of Project Management and experience with various property development projects in Vietnam.

Iam expert with health and safety practices

Electrical/electronic engineer. Autocad design engineer.

More than 25 years experience in the Project and Detailed Designs and Management of Water & Wastewater Treatment Systems, Pumping Stations and Sewerage Reticulation Systems

A Chartered member of Institution of Engineers (India), Project Management credential holder from PMI, USA and Post Graduate in Civil Engineering with specialization in Soil Mechanics and Foundation Engineering with over 21 years of professional experience in infrastructure projects including constr

Project Manager 20 yrs experience Oil/Gas from Ground Up. Objective supported by: INTERNATIONAL PM MBA Ceng INSTRUMENTATION AND CONTROL HNC PROCESS CONTROL CONSTRUCTION SUPERVISION COMMISSIONING / AUDITING FISCAL MEASUREMENT SYSTEMS ENGLISH / SPANISH

Master in Construction Management. Hands-on experience in the field and in the office in the three basic specialties: civil, electric and mechanical. Computer skills with: Expedition and Primavera /Suretrack, Windows, Excel, Lotus etc.. Prepare the WBS, OBS, budget control etc..

Throughout my Professional Career and experiences being a GC, one of my duties was Estimating, which I did learned and had to do from ground Up, on most of the Projects I did Participated in, from simple Electrical Ductworks up to Special Warehouses at Industrial Division.

I have been employed in the field of Power Engineering, Industrial Installations, Cement Industry and Sewage Treatment Plants at all stages, covering turnkey projects: erection, starting - up, commissioning, running and all kinds of maintenance.

A highly skilled industrial project construction & facility equipment installation management professional who has worked on projects from "cradle to grave" for various major companies. Over 15 years project management experience.

First 1 2 3 4 5 6 [ 7 ] 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out