Resume - Over 14 years working experience 3 years experience in design office and 11 yea...

Misco Jobs

Resume #57202

CONTACT INFORMATION:
View contact information...

Summery

Over 14 years postgraduate working experience 3 years experience in design office and 11 years experience in the construction and supervision of major prestigious international projects.

I first joined Dar Al Handasah Consultants (shair and partners) in 1994 as Structural Designer Engineer, Left in 1997 then rejoined the firm on 2001 as Site Structural Engineer on Dar's prestigious projects undertaken at Egypt and Saudi Arabia.

Fields of Expertise

* Construction Management * Structural Design Review * Technical Coordination
* Technical Management * Site Preparation * Safety Procedures
* High rise building construction * Industrial construction

Professional Experience
1. Review the structural drawings and specifications submitted by the design consultant(s) at each stage of the design to ensure completeness, correctness and compliance with the scope of work and agreement requirements.
2. Review and assess contractor's alternative proposal, calculations and liaise with the designer for final approval/comment.
3. Review the contractor's requests for information (RFI), material submittals, shop drawings…..etc.
4. ööAttend technical meetings with the contractor and client team.
5. Knowledge of ACI,BS,UBC design standards
6. Familiar with FIDIC conditions.
7. Lead, direct and monitor the performance of all site engineers and support staff under my charge.
8. Supervise and remain vigilant regarding all aspects of the construction activities
9. Advise and assist the contractor on construction procedures through method of statements.
10. Coordinate the construction work with different disciplines.
11. Prepare site work instructions to the contractor and the relevant verifications including cost estimate for the client's approval.
12. Observe the safety procedures followed by the contractor. Issue instructions as necessary to correct safety violations.

Experience

DAR AL HANDASAH (shair & partners)
Al Qasr Project
Riyadh, Kingdom of Saudi Arabia 2006 - Present
Senior Structural Engineer
Al Qasr project is 400 million US$ project located in the heart of Riyadh, aims to deliver high quality housing for Saudi citizens. With a projected 4,000 units over 816,000 square meters, the development is one of the single biggest real estate projects of its type in the Middle East. The project consists of a plot area for 4 types of 2-storey private villas and 16 types of 5 storey apartment buildings
* Managed crew of 11 field engineers and 5 surveyors
* Review all correspondence to the contractor to ensure its compliance with contract conditions including shop drawing, material, and method of statements…etc.
* Reviews contractor's correspondence on contractual issues and prepares drafts of replies for RE's signature.
* Reply on contractor's quires through Request for Information RFI and solving arising site problems.
* Participates in reviewing and assessing all claims submitted by contractor.
* Participates in the progress meetings and other technical meetings.
* Issue Site work instructions and nonconformance reports to the contractors.
* Solving raised site problems during stages of construction.

DAR AL HANDASAH (shair & partners)
Abraj Al Bayt project (King Abdul Aziz Endowment Project)
Makkah, Kingdom of Saudi Arabia 2003 – 2006
Senior Structural Engineer
The prestigious 2 billion US$ Abraj Al Bayt project (King Abdul Aziz Endowment Project), being built close to the holy mosque in the holy city of Makkah. Spread across a 1.5 million square meter area, The project also features a massive 70,000 square meter shopping mall targeting the millions of pilgrims who throng the holy city; a car parking facility that will accommodate 1,500 vehicles and a mosque that will hold 25,000 worshippers.
* managing the construction of Hajar Tower form the foundation level, Podium and typical floors.
* Supervision for the execution of the in situ post tension slabs.
* Inspection of all daily site activities including steel reinforcement and formwork inspection and monitor the concrete casting on site.

DAR AL HANDASAH (shair & partners)
San Stefano Complex
Alexandria, Egypt 2001 – 2003
Structural Engineer
A high-rise building built on an area of 30000 m2, including a hotel, apartments, offices, shopping mall and a marina. Being 35 floors tall, it is one of the tallest buildings in the city. It was opened in 2006.
* Review of the contractor's shop drawings for steel reinforcement.
* Review of the contractor's method of statement and alternate proposals.
* Coordination with other discipline engineers for any discrepancies in the design drawings.
* Technical support for the site staff in solving any raised problems during construction.

Electricity DE FRANCE 2000 - 2001
Ain Sokhna Power Plant
Ain Sokhna, Suez, Egypt
Structural Inspector
The project consists of the development, construction and operation of a 682.5 MW steam generation plant, which will be fueled with natural gas with residual fuel oil (mazout) as backup fuel.
* Responsible for the construction of boilers foundation, main electrical building, Transformer foundation and pipe racks.
* Perform daily inspections for the steel reinforcement, formwork, Anchor bolts fixation and concrete casting through inspection requests submitted by the contractor.
* Prepare weekly report to the construction manager including the progress on site and the site problems.

KAISER ENGINEERS
Ezz Flat Steel (EFS),
Ain Sukhna, Suez, Egypt 1999 - 2000
Structural Inspector
The new minimill complex of Ezz Flat Steel (EFS) is designed to produce 1.2Mt/y of hot rolled coils. This is one of the most modern and competitive minimills for the production of coil and has the ultimate aim of rolling Ultra Thin Strip.
* Representing the client as an engineering consultant for construction supervision.
* Inspect of all the reinforced concrete work including the machine foundations and the Anchor bolts details for various equipments to ensure conformance to design drawings and specifications.
* Provide technical support to solve construction problems and design modifications.
* Monitor the progress on site according to schedules and report to RE.
* Control the third party laboratory on site.
* Attend the crushing of concrete cylinders.

Alexandria National Iron & Steel Company S.A.E. (ANSDK) 1998 - 1999
ANSDK CSP hot-strip mill
Alexandria, Egypt
Steel Structure Inspector
The project was the construction of a flat steel project which is a compact hot-rolling mill with skin pass mill, a pickling line and a coil service center designed for a capacity of 800,000 tones/year.

* Monitor the progress of construction as client representative during the stages of construction.
* Review the fabrication and installation shop drawings provided by the contractor (Ferro Metal co FMC)for structural steel buildings
* Weekly visits to the steel fabricator factory to monitor the progress of fabrication and the delivery status and define the priority in delivery according to the site progress.
* Inspection of the delivered steel and monitor the installation sequence.

BALFOUR BEATTY & ARAB CONTRACTORS JV 1997-1998
Alexandria's New Library
Alexandria, Egypt
Field Engineer
The library building is supported on a reinforced-concrete raft supported on piles, The design of the new library incorporates four basement levels and six floors under the highest point of a dramatic sloping circular roof, The roof structure is composed of precast girders of reinforced concrete and a diagonal secondary steel system to support the roof glazing and cladding.

* Working as field engineer for the execution of the reinforced concrete work.
* Prepare the cut and bent lengths for the steel reinforcement according to the approved shop drawings.
* Check the steel fixers work and the carpentry work prior to casting concrete.
* Manage and direct foramens, Steel fixers and carpenters for daily work activities.

DAR AL HANDASAH (shair & partners)
Head office
Cairo, Egypt 1994 – 1997
Structural Designer
Joined Dar Al Handasah structural department as structural designer for reinforced concrete and structural steel design where I participated in the design of various prestigious projects and gained good experience in using deign softwares like: SAP90, STAAD III and in applying international codes like: ACI, BS & AISC

EDUCATION

Alexandria University, Alexandria, Egypt
Faculty of Engineering
Bachelors of Science in Civil Engineering, 1993

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 751 to 800 of 4805)

Go to Search Parameters...

Brief Description

Extensive background in Program/Project Management.

i am working as an electrical site engineer in ETA at dubai.I am working in dubai metro project.

3 years of professional experience (after Post Graduation) in Highway Engineering (Expressway, National Highway, Hill Roads etc.).

Proe , Autocad, Unigraphics (Modeling,Drafting,Assmbling)

Project Execution : HVAC / PLUMBING / FIRE FIGHTING

I have spent nearly four years as a Geotechnical Engineer and have gained an immense variety of knowledge from running numerous and varied site investigations, which has given me strong skills in writing interpretive ground investigation reports for foundation design and slope stability, supervising

Structural engineer with 4 years experience and Master of Science in Construction management.

I am an architect and urban designer practicing in the Middle East for over thirteen years. I have held design and project management responsibilities at senior positions with international British consultants and Government organizations wherein I handled wide range of building types such as commer

Over ten years of experiences in various sectors of the residential and commercial building industry.

Civel engineer ,with a experience of 8 year in highway construction

Proficient in Microstation,Autocad,Photoshop,and Corel Draw.Knowledgeable in HVAC plans, architectural plans, structural plans.Proficient in English.Time Management, Teamwork, Team Building and Management, Motivation.

Position as Safety Supervisor to achieve ZERO ACCIDENT goal of the company to serve,I have a total of 22 years of work experience 15 years in Indian Navy and 07 years in Oil, Gas, Petrochemicals and Construction field in Gulf and India.

Cost Engineer for 11 years. Has adequate experience in a multitask discipline as planning, project management and supervision, quantity survey. Proficient in SAP and microsoft software applications. Team player, diligent and hard working.

SCADA, DCS, CCMS, BMS, DDC, power, lighting, grounding, ...

Masters degree in Highway/Structural engineering, 14 years of professional experience - working in the department of roads, good skills in CAD application (eg. SAP2000) and other computer applications (eg. spreadsheets)

Presently I am working in Saudi Arabia. I have nearly 17 years experience. From 1996 November I am using Microstation. I can work in Microstation & AutoCAD. I have experience in AutoCAD 2006 from my personal PC. Mainly I am working in architectural discipline. I can do structural & civil work also.

Mechanical Engineer having 14 years of experience in the field of construction in Refinery, Petrochemicals & Power plant mainly focussing on Piping, Reformers & Heaters. Has been worked with major international companies like TEchnip, Technip KTI etc.

Dear Hiring Manager

Btech MBA with 3 yr exp -business analyst

27 year veteran contracts manager , civils and epc specialist

cv for civil foreman

Lead Document Controller, strong interpersonal skills, highly motivated, able to work in multinational companies

Innovative career in the field of electrical power engineering: Installation, Service and Commissioning

B. Sc. in Civil Engineering, 6 years in ERicsson & Nokia, Construction, QA, Documentation, Telecom power management

Fully equipped Mechanical Engineer doing Quantity Surveying

I have more than 6Yrs Exp. with oil and gas field on piping work like Installation,Spool fabrication,Hydro testing,Red line and Asbuilt making,Pumb house,Tie-in area, Receving basin area,etc..work in Abroad and India,

A proactive, versatile and committed Executive Manager with extensive experience spanning throughout the world and accustomed to project and people management, coordinating resources effectively to achieve targets often within stringent deadlines. A skilled problem-solver

HSE Officer with a background of over 19 years in handling safety, Health and Environment in large multi international Oil & Gas, Chemical and Construction Companies (industrial, power plant, petrochemical, marine facilities and heavy fabrication).

Responsible for Receiving, Storing, Issuing, Stock Inventory for all types of Materials for M/s TECHNIP, BECHTEL, GASCO, NPCC (Piping, Instrument, Electrical, Structural steel, Equipments etc. Maintaining uptodate stock Records updating stock

Auto Electrician, Auto Mechanic, Heavy Equipment Mechanic

Document Controller

Over 14 years working experience 3 years experience in design office and 11 years experience in the construction and supervision of major prestigious international projects .

An engineering position in the emphasis of tool design, opto-mechanics, manufacturing, liaison, stress analysis, aircraft interiors or structures.

13+ years geological/geotechnical/GIS international hands-on experience in the construction & energy industries. MSc/BSc/PgD in the geosciences. Excellent software skills. Contractual or permanent post sought. Available now.

I have extensive hands on experience of more than Eight years, including Six years in the Middle East, in the field of Mechanical Engineering for Building Services, working with reputed Engineering and Consulting Services houses in KSA and UAE.

Site Engineering, Autocad & Estimate

Inasmuch as the position would requires strong degree of integrity, plus high level of motivation and assertiveness, I shall be very glad to be a part of your company.

Safety Manager

Quality control inspector

•Experienced Mechanical Engineer with over 8 years experience in HVAC Engineering.

17 years in the field of construction, Experience Architectural Works and Interior works in the construction of the following building such as: Five Star Hotel, Convention Center<Condominuim, High rise Offices, Commercial and residential ,Civil Defense Mass Rapid Transit and chemical Plant.

•Strong knowledge of engineering design principals and methods necessary to adequately dimension and detail complete design concepts. •A thorough knowledge of mechanical, pneumatic, hydraulic components and electrical systems. •Experience with Classification Society Rules and Regulations.

I am seeking a responsible position that is both challenging and an opportunity to share in the rewards of successful performance in an area where creativity and business experience will be of an immediate value to the organization. I have 25 years of electrical experience

Cost Engineer/Estimator with supervisory experience. Responsible for budgeting, estimating, budget coordination and total cost management. Identified systems and procedure that are necessary to ensure that the engineering, procurement, construction and start-up phases are properly planned.

ENGINEERING MANAGER / CIVIL ENGINEER Specialized in Tunneling utilizing EPBMs and SEM / NATM. Holding a Masters Degree in Civil Engineering with 8 years experience in working overseas for leading Construction Contractors, 6 years in tunnelling.

Civil Engineer / MBA with 14 years of international construction project management experience.

Dear Sir / Madam, I’m interested a job opportunity with your organization which would require my skills & qualifications. I have 24 years experience Oil/gas & Power Industry, Construction Management/Supervision & QA/QC, Domestic & Overseas.

I am 37 Y rold, have 17yrsp.,after pass Dip. in Mech.engg., and 9yrs exp., after pass Dip. in Industrial safety from reputed institute in India, in Intl. standard Companies like CCIC-Qatar& Kuwait, L&T ECC-India, UB Engg ltd-India& Kuwait, Enelpower s.p.a.-Qatar.My Exp.

Project Engineer To be a member of a company that designs and builds large offshore and multi-purpose projects. Interests: Hydraulic Structures and Pipelines – Project Execution and Construction Management.

Remote Site Expert : Global Experience.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 [ 16 ] 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out