Resume - 11 years of experience in Erection & Installation, Engineering, Design, Commissi...

Misco Jobs

Resume #57999

CONTACT INFORMATION:
View contact information...

SUMMARY:
Versatile, capable with abilities to analyze, coordinate and execute job. Enjoys working with challenges and maintains the rapport of the company working with.
Responsibilities:
* Responsibility of Site Execution work including communication with Customer, Engineering Contractor and PMC. All these tasks involve work force Management and Material Management.
* Estimation and Survey for New Project Proposal including preparation of Instrument Scope Bill of Material, Engineering drawings, Vendor Quotation and Technical review.
* Coordination with Vendor for commissioning assistance.
* Design of Wiring Drawing, Junction Box Schedule, Cable Gland Schedule, Cable Schedule, Installation Layout, Cable routing & Layout.
* Well conversant with the study of P&I diagram, preparation of I/O Lists from Functional Schematics, Control Panels, Installation drawings, Cable Schedule, Tray calculation.
* Preparation of Instrument Index, Loop Diagram, Instrument Hook up Diagram, Instrument Data Sheets in ISA Format, Cause & Effect Diagram, Junction Box Wiring Diagram.
* Carried out erection, installation and commissioning of GE Fanuc PLC System.
* Carried out Installation, Erection, Pre Commissioning and Commissioning of
Acoustic Pilot Flame Monitoring System, ROV, PD Meters, Strainer Cum Air- Eliminators, Set Stop Valves, RTD 's, Batch Controllers, Remote Interaction Terminal, Card Readers, ESD PB, Earthing relay, Density Meters, Barrier Gates, MOV, Servo Level Gauges, Float & Tape Gauges, Radar Gauges, Tank Side Indicators, Coriolis Mass Flow Meters, Gas Detection System, PLC, System Networking, PT, DPT, LT, TT, ESD Valve, Pressure Control Valve, Flow Control Valve, Slam Shut Valve, Weigh Bridge, Electronic Display Unit, Turbine Meter, Orifice Meter, CCTV, Leak Detector System.
* Apart from Instrumentation activities installed, erected and assisted in Commissioning of UPS Systems with batteries.
* Integration of Pumps, Instrument Air Compressor, MOV, DG, LT/HT Status, ROV with PLC System.
* Proper documentation at Site has minimized time and energy. As built documents prepared at site as soon as changes are done thus providing information easy for access.
* Involved in Networking of Instruments, PLC with Automation System. Knowledge in RS 232, RS422/485 communications and other testing tools.
* Carried out Calibration and Weights & Measures stamping.
* Involved and Performed SAT for Terminal Automation System.
* Third Party Inspection, its coordination and direct inspections at Vendor's place.

Skills:
* Project Management, Technical assessment, Teamwork, Troubleshooting, Communication, and Networking.
* Capable to work in Engineering, Design, Construction, Commissioning and Customer Support.
* Design, Installation, Testing and commissioning of various instruments.
Other Skills & Training:
* Worked with GE Fanuc's 90-30 series PLC DOS based, Versapro and Versamax.
* Completed successful Training of "PLC PROGRAMING & IT'S APPLICATIONS" at Advanced Training Institute, Hyderabad in Allen Bradley's SLC 500.
* Completed successful training in "Serial Data Communication Standards" at Daniel Measurement & Control (India) Private Limited, Baroda.

Computer Skills:
* MS Windows XP OS.
* MS Office.

Membership:
* ISA Member till March 2010.

TECHNICAL EDUCATION
B.E. (Electronics & Instrumentation) with 75% Shanmugha Arts Science Technology and Research Academy, a deemed University, Tanjore. (Previously Shanmugha College of Engineering, Tanjore affiliated to Bharathidasan University) by May 1996.

EXPERIENCE:
Almeer Technical Services Co Ahmadi – Kuwait. Till date

Instrumentation Engineer (October 2005 onwards)

As Instrument Engineer, was leading the Instrument Team in Proposal, Engineering and Construction for various KOC Projects.
Represented the company for Technical Discussions with M/s. Pibiviesse Valves and M/s. Biffi Actuators in Italy.

KNPC – SHUAIBA REFINERY:
* Successfully completed GRTA 2006 for KNPC Shuaiba refinery as Instrumentation Engineer in "Provision of ROIV & Up gradation of Safety Interlock project".
* Assisted construction execution team. Pre commissioned and commissioned Instruments. Honeywell FSC system commissioning for Remote Operated Isolation Valves and ABB August DCS system hardwire integration for upgradation of Safety Interlocks in Various Process Units. Involved in SAT and assistance for start up.
* Single handedly commissioned Micro motion CNG050, CMF400 Mass flow meters and integrated with DCS system in GRTA 2006 in Unit 05 & Unit 07A/B.
* Single handedly commissioned Leak Detection System installed in Vent ROV's at Unit 03.

KOC – Gathering Centers:
* Currently working as approved Instrumentation Engineer for Corrosion and Scale Monitoring and Inhibitor Injection Package for S.E.K GC's (14 Nos.). As a Key person monitoring Survey activities and involved in Detailed Engineering for Instrumentation Package.
* Carried out Engineering of PLC system loops for "Replacement of Fire Water Pump and Prime Movers for KOC in GC - 16, GC – 17 & BS – 170".
* Single handedly carried out complete assembling, wiring and successful testing of GE Fanuc's LM 90-30 Versamax PLC in IP 65 Panel – 3 sets.
* Installation and Commissioning of "Acoustic Pilot Flame Monitor" with M/s. John Zink for KOC in GC – 27 & GC – 28.

Project 18: KOC approved Lead Instrumentation Engineer for "Corrosion and Scale Monitoring and Inhibitor Injection Package for S.E.K GC's (14 Nos.)".
Project 17: "Installation of Remote Operated Isolation Valve and Up-gradation of Safety Interlocks of various Process Units in KNPC, Shuaiba Refinery".
Project 16: Engineering & complete wiring, Assembling and testing of IP 65 Panel for "Replacement of Fire Water Pump and Prime Movers for KOC in GC - 16, GC – 17 & BS – 170".
Project 15: As Instrumentation Engineer - Installation & Commissioning assistance of Acoustic Pilot Flame Monitor for KOC in GC – 27 & GC – 28.
Project 14: Kuwait Oil Company (KOC) approved Instrumentation Engineer (Part Time) for "New 52" HP and 42" LP Fuel Gas Lines from Shuaiba M/F (M/F SH01) To M/F "X" In Burgan".

M/s. Daniel Measurement & Control (I) Pvt. Ltd., Baroda – India. 14.06.00 to 09.09.05
Senior Engineer (2003 – Sep 2005)
As Site-in-Charge involved in Erection, Installation, Pre-Commissioning and Commissioning of Terminal Automation Systems and Gas Metering System.
* As Senior Engineer headed the Installation Team, Coordinated with Customer for Site activities, Manpower planning, Sub Contractor Finalization, Preparation of BOM, Review of Installation & hook up drawings, Sub Contractor Bill Approvals etc.
* Executed successfully Instrumentation activities, Calibration of Instruments, Functionality tests of Control Valves, Pre-Commissioning and Commissioning of Gas Metering System at GAIL, Mumbai as Site-in-Charge.
* Single handedly commissioned FMC System and LM90-30 (DOS based) PLC at BPCL Secunderabad site. Successfully completed Site Acceptance Test and system hand over to the Customer of IOTL Manali as well as BPCL Secunderabad.
* Engineering done at site to suite the site condition for Power Distribution to all Automation Equipments at IOTL site. LM90-30 (Versapro) PLC I/O wiring done as per the site condition for ROV at IOTL site. Successfully completed Site Acceptance Test and system hand over to the Customer of IOTL Manali
* Trouble shooting of instruments in the absence of Customer Support Engineer at IOTL Manali as well as BPCL, Ongole.

Inspection:
Undergone inspection of materials coordinating with Third Party Agency for:
1.G.I. Cable trays approx. 2.5 Kms of 50mm, 100mm, 150mm, 300mm and Ladder Trays at M/s. M.M. Engineering Works, Baroda for BPCL, Karur Project.
2.Float & Tape Gauges, Tank Side Indicator and its associated hardware 12 sets each at M/s. Nivo Controls, Indore with M/s. Tata Projects Limited for BPCL, Karur Project.
3.Power, Control, Signal and I.S. Cables approx. 25 Kms. at M/s. Associated Cables, Chiplun with M/s. Tata Projects Limited for BPCL, Karur Project.
4.Panel 2 Nos. at M/s. Rittal India, Bangalore for IOTL, Dumad Project.
5.Power and Control cables approx. 5 Kms. at M/s. Suyog Electricals Private Limited, Halol with M/s. SGS India, Baroda for GAIL, Mumbai Project.
6.RTD – 4 Nos., Temperature Gauge – 2 Nos. and Thermowell – 8 Nos. at M/s. Altop Industries, Baroda for GNFC, Bharuch Project.
7.Digital Indicators – 6 Nos. at M/s. Pantech Instruments, Baroda for GNFC, Bharuch Project.
8.SS Fittings and SS Tubes at M/s. Aditya Engineering, Baroda for GNFC, Bharuch Project.
9.869M Flow Computer at Daniel works for M/s. Essar Power, Hazira.
10.Spectra-100 Flow Computer Inspection at our works for M/s. GAIL, Bharuch.
11.Junction Boxes at Baliga, Chennai for M/s. Nipco plc.

Project 13: Meter Run & FloBoss 503 at GAIL (I) Ltd, Dhuwaran - Gujarat.
Project 12: Gas Metering of GAIL (I) Ltd, Mumbai.
Project 11: Terminal Automation of Bharat Petroleum Corporation Limited, Cherlapally - Secunderabad
Project 10: Ethanol blending of Bharat Petroleum Corporation Limited, Ongole – Andhra Pradesh.
Project 9: CPCL Bulk LPG Terminal of Indian Oil Tanking Limited, Manali - Chennai.

Engineer (June 2000 to August 2003)
Responsible for Techno - Commercial, Procurement, Manpower, Material, Erection, Approvals, Payment, Coordination with Customer and other Contractors for smooth execution of the project.
* As Site-in-charge successfully completed installation & erection and Pre-commissioning activities of Indo Burma Petroleum.
* Pressure leak test was carried out for the entire skid and Valve passing at Gujarat Powergen Energy Corporation was identified. Hydro testing of tubes was carried out as per the standards ensuring safety. Gas metering system was installed after disintegrating the spool and assembled as a skid at site.
* As Site-in-Charge successfully installed and erected the Bharat Petroleum Corporation Limited Terminal, Karur. Commissioned the 25KVA UPS system and pre commissioned the Tank farm System.

Project 8: Gas Measurement System of M/s. Gujarat Industries Power Company Limited, Baroda.
Project 7: Terminal Automation of M/s. Indo Burma Petroleum, Baroda.
Project 6: Ethanol blending project for M/s. Indian Oil tanking Limited, Baroda.
Project 5: Filtration, Metering skid erection & Installation for M/s. Gujarat State Petronet Limited at Bharuch.
Project 4: Orifice meter, Turbine meter Skid Installation for M/s. Gujarat Powergen Energy Corporation at Bharuch.
Project 3: Terminal Automation of M/s. Bharat Petroleum Corporation Limited, Karur.

M/s. Protech Controls Private Limited, Chennai April 1998 to June 2000

Assistant Engineer (April 1998 to June 2000)
* Coordinating with Client and Customer through Material management.
* Direct handling of Manpower.
* Total coordination is extended thereby commissioning the entire system.
* Extended support for successful Site Acceptance Test.

Project 2: Terminal Automation of M/s. Indian Oil Corporation Limited, Bangalore.
Project 1: Terminal Automation of M/s. Hindustan Petroleum Corporation Limited, Bangalore.

M/s. Silicon Valley Corporation, Chennai August 1997 to Feb 1998

Business Development Executive (August 1997 to Feb 1998)
* Enhanced Onkyo Audio Communication System to market through Road shows Exhibition and direct marketing with customer.

M/s. Reed Relays and Electronics India Limited, Chennai Oct 1996 to April 1997

Production Engineer Trainee (Oct 1996 to April 1997)
* As Production Engineer involved in Key switch Production handling a Single Semi-Automated machine producing 5000 keys per shift.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2351 to 2400 of 4803)

Go to Search Parameters...

Brief Description

Experienced Autocad drafter with 5 yrs. structural steel detailing experience seeking employment.

Highly experienced Project Mgr in construction and environmental projects. Extensive experience in Federal & State projects, contaminated soils & groundwater, demolition. Hands on and takes ownership. Extensive experience in massive soil relocation and placement. Available for overseas projects.

Construction verification, Cost estimation for mechanical systems involving process piping, heavy civil structures, Plumbing, and fire protection. Project management with Profit-Loss responsibility, Project cost control, Project execution, project control & close out.

I am Danish construction engineer. I have worked as a construction manager for about 3 years. The projects have been large infrastructure projects, commercial, and industrial projects. I have experience in site management and project management,

6+ years of software design and development experience with specialization in Client/Server programming, Object Oriented Analysis and Design. Proficient in, C/C++, MFC, Visual C++, Win32 API, COM/DCOM, multithreading.

Curtain Wall Civil Structural Engineer Manager

A structural engineer with experience in design, construction and inspection of buildings and bridges.

11 years of experience in Erection & Installation, Engineering, Design, Commissioning, Inspection and other Management activities in the field of Terminal Automation, Gas Metering, Refinery, Gathering Centers and others.

Engineer with practical business, design and management experience in the areas of Civil and Geotechnical Engineering. Educated professional, committed to continuous improvement, ethics, teamwork and quality service. Detail oriented, excellent communicator, and capable of managing multiple projects

16 years in Engineering, Procurement and Construction projects associated with cost control, planning and scheduling fields. Project categories includes petrochemical, gas and oil refining, power, and industrial, buildings, roads and a sports complex. Conversant with project cost control s

Willing to accept challenging career in telecom Development Equipment Environment with management and seeking for a position where I can utilize my technical skills and professional experience, to provide the best of mine for the success and growth of the organization and gain satisfaction thereof.

To obtain Position in Project Management or Project Engineering in an International Environment

SAP knowledge,Material engineer,controller.Thorough knowlege of Isometric drawing,fabrication,material manual,and inventory.oil and gas field,gulf and offshore experience.

Senior Project Coordination/Management Engineer-Oil Gas Petrochemical Energy & Infrastructure

Chartered Electrical Engineer and Member of the Institution of Engineering & Technology (IET).

I am having Five years of experience in the field of Refinery construction, petrochemical shutdown job and steel erection. I was done courses in IOSH Managing safety, fire fighting, Industrial safety course, MS office etc.

Instrumentation / Control System Engineer

Crawler Crane Operator

Mechanical Design Engineer: Design of Sanitaiton, Water Supply & Treatment, Fire Fighting, HVAC Systems, etc. Capable of Working both as a design engineer (consultancy companies) + Contractor office Engineer + Management & Proposal Writing

Experience- Over 10 years as Mechanical Engineer engaged in Oil & Gas Petrochemical Industries and Refineries, providing Engineering, Fabrication, Pre-commissioning and Commissioning Services.

Diesel Mechanic

High qualification in construction site management

industrial maintainence/electrician

Graduate Engineer with 1.5 years professional experience. Degree in Civil Engineering. Masters Degree in Water & Environmental Engineering.

Design urban infrastructure, industrial, power, airports Techno economic feasibility studies Project Management Bid evaluations, price analysis, preparation of technical specifications Design review Site Review Business Development, client interaction, presentation

material controler for production using and new project material handling.

Total 8 yrs experience in construction field (both mechanical & civil) including LNG storage Tanks, various areas of power plants & played a Key role in coordinating with Occupational Safety, Health & Environmental activities in a uniquely knowledge-based & innovative work environment.

Over 6+ years experience in Content Management. Professional Proofreading, Editing, Writing, Documentation using various editing tools as Framemaker, Latex, MS-Word.

LSIT, US Citizen, Willing to relocate

I see myself as a highly talented Health Safety & Environmental Management professional with extensive experience ensuring compliance with the Health, Safety & Environment rules, regulations and policies & standards in the OIL & GAS SERVICE INDUSTRY in China/ Singapore with leading companies. Have i

15+ years of heavy equipment experience on all sizes and pieces of equipment

Twenty+ years of Materials and Procurement Management experience including supervision and management of warehouse contractors, material control, procurement activities including vendor sourcing, requisitioning, procurement and expediting, warehousing including receiving and issuing.

HSE-Process Safety Manager/Specialist with wide experience of petrochemicals HSE management, PSM (Process Safety Management) including Permit to Work, Accident Investigation, etc., Environmental Management System/ISO 14001 implementation, Capital Projects Safety, Environment, and Fire protection

My major responsibilities are Core Photography, Core Slabbing ,Core reservation and Storage Services ,Lithology rock description ,Real time monitoring of drilling parameters, preparation of formation evaluation logs, identification and classification of samples

I have 25 years experience operating all types of heavy equipment used in mining, mass excavation construction, fine grading, and underground utililities.

I am a diesel mechanic by trade in the mining and constuction industry. I have 13 years experiance in repairs field service and setting up and running full on maintenance worshops. I am a hands on person getting involve in anything to get the job done properly.

I can work as a Administrative Clerk, Logistic Co-Ordinator, Computer Operator, Secretary

Working towards CSO designation, WHMIS trainer, Aerial Work Platform trainer

Demonstrated expertise in the life cycle of software development. Proven success track in managing people, resources and processes within a worldwide organization while effectively building internal and external relationships. Have a credible track record in resolving customer-related issues

Senior-level Turbine Specialist/Technician eager to contribute comprehensive mechanical acumen as well as dynamic supervisory, safety management, and troubleshooting talents toward actively supporting a progressive organization in optimizing results.

Very committed and responsible. Always catch-up with technologies update.

-AUTOCAD 2D MORE TO ARCHITECTURE( RENOVATION HOUSE,SECTION PLAN)

Operate excavter and haul trk experiance loading haul trks as well as some dozer exp also have Pa class A CDL

B.S Industrial Engineering capable of Production Planning and Controlling

CIVIL ENGINEER(BSc. Civ. Eng., Cape Town) Resident Engineer / Project Manager Fluent in English, French, and Portuguese

Looking for a challenging position in the areas of Electrical with Interest in PCB Board Design, R&D Engineering or Power Plant.

Bachelor of Engineering. Public Sectors, Industries, Calibration and Standard Lab, Power Sector, IT Industries, Engineering Institution, Defence centre, R&D centre.

QA/QC Inspector (Welding/Piping)

Enthusiastic And Self Determined Engineer Focused In Construction Management

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 [ 48 ] 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out