Resume - About 9 years+ experience in cement industry in mechanical maintenance (preventi...

Misco Jobs

Resume #6074

CONTACT INFORMATION:
View contact information...

SAMPATH KUMAR DANUGURI
Objective: Looking for an exiting and challenging career, which helps in reduction of the overall production cost through good maintenance, thus improving Plant efficiency and nation's interest
Experience
( 9 years + in Cement industry)
„X 1994-1997 Kesoram Cement Factory, BasanthNagar,
Maintenance of Crushers, ballmills, kiln, mechanical and pneumatic conveyors, bagfilters, ESP, Cyclones, fans.
* Analysis of process parameters and fans performances.
* Alignments and balancing of fans
* Shift maintenance of the plant.
* An internal auditor for ISO-9002 certification.
* 1997-2000 Coromandel Cements Ltd. Ramapuram, AP
Asst. Mechanical Engineer (including Costing techniques)
* Implemented costing techniques for the first time.
* In-charge for kiln section
* Cost Analysis of entire cost of production per ton of Cement for the reduction in cost.
* Inculcating cost awareness among the employees - Resulted in minimization of wastages.
* Budgetary system for the succeeding financial year has been introduced - For better planning, procurement of spares and other advantages.
* Preparation of cost sheets, Variance analysis, Saving Schemes etc. -
for overall improvement of plant performance.
* Optimization of manpower - Better utilization of human resources.
„X 2000-2002 Innovation Software Exports Ltd. Chennai.
Software programmer
* Developed Software for Apollo hospital on VB/ORACLE platform.
* Developed software for process parameters for cement plant in VB/ORACLE platform.

2002-Till Date Coromandel Cements Ltd. Ramapuram, AP
Mechanical Engineer (incl. Predective maintenance Cell)
* In-charge for predictive, preventive, and corrective maintenance cell and reporting to SR.DGM(T) / Managing Director
* Simultaneously working in parallel with Asst. Manager (Mech.) in all the maintenance activities.
* In-charge for Ball mills (Raw Mill and Cement Mill)
* Successfully Implemented computerized maintenance System including the maintenance work order system.
* Responsible for overall reduction of stores and spares cost per MT
* Certified by SKF in Root cause failure analysis of Bearings
* Certified by SKF in Maintenance of Bearings
* Undertaking in house training classes to workmen
Achievements
* Reduction of power consumption by about 100 KWH
* Reduction of stores and spares cost from Rs.80.00 to Rs.70.00 per MT
of cement.
* Fine tuning of equipments from Unsatisfactory condition to Satisfactory condition has resulted in smooth running of equipments and about 80% of unplanned stoppages are reduced.

Education
Graduate in Mechanical Engineering - from Kakatiya Institute of technology and science, Kakatiya University, Warangal - Andhra Pradesh.

Interests
Working on Computers, playing and watching cricket, Group discussions,
Browsing educational web sites.
Personal Information

Father Name: D. Eshwaraiah
Date of Birth:30.07.1968,
Sex: Male
Marital status: Married
Nationality: Indian
Present Salary: 14000.00 (incl. perks) + Free accomodation
Expected Salary: Negotiable

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2551 to 2600 of 4812)

Go to Search Parameters...

Brief Description

I am a BS Mechanical Engineer who had served primarily as a Senior Fire Protection-Applications and Design Engineer for around 17 years plus and 5 years as an Occupational, Health and Safety practitioner in a petrochemical industry with a primary function as Fire Safety Engineer. My specialty profe

Business planning, estimating, planning and scheduling, cost control and reporting, contract management, earned value, productivity monitoring, claims disputes and resolution, lean construction, high level presentations, multi tasking, meeting deadlines, and creating win-win situations.

20 years of experience (Eight year in Gulf) in varied discipline of Engineering i.e. Quality Control and Assurance, Inspection and Expediting, Piping Specification, Material Handling equipments & system specification, Shutdown maintenance Inspection, Construction Site Inspection(Piping,PV)

Experienced frame and finish carpenter with cabinet experience and management experience

Engineer with well developed analytical and research skills. Possessing expertise in Electrical Demand Forecasting, Power Flow Analysis, Fault Analysis, Stabilities Studies and Economic Load Dispatch. An innovative, dynamic, confident and articulate individual

I have electrical trade certificate holder, and I have more than ten years of experience in maintenance, installation, repair, fault finding of electrical equipment, laying UG cable to connect main switch gear, and maintenance of HT LINE transformer line

A graduate in biomedical engineering with over 5 years of experience in Medical equipment planning, procurement, design assisstance, primary level maintenance in Health Care/Hospitals and developing Management Information System of Biomedical Department

Mechanical Engineer, pipe stress, pressure vessel, compress, caesar

1) Graduate in Mechanical Engineering with 12 years experience in Construction Planning in the power, petrochemical, oil & gas, chemical and industrial sector 2) Proficient in Primavera, MS Project, 3) Strong project management, technical, communication and leadership skills

Ten years experience in Mechanical engineering / Project Engineering of EPCM companies.

I have eight years experience in major civil works projects such as,bridges and metro rail projects.

I am a highly experienced and skilled senior service person. I have many years experience as a expatriate including working in what are considered 'hardship' postings. I am Caterpillar dealer trained, but have recently been working in open cast mines, both coal and gold, in Africa and Asia.

I am HSE professional having work experience of chemical industry and drilling , my education level is masters also completd courageous leadership course in health and safety,management of change, IOSH managing safely,ISO internal audit course,OSHA 18001 internal audit course.

Document Controller, Coordinator, Hr, Admin, IT

High-energy administrative, dependable professional with good judgment and wisdom. Excellent knowledge of principles and procedures for personnel recruitment, selection, training, compensation and benefits, HR information systems, human resources modeling, leadership technique,

Over 17 years of rich & effective experience in Instrumentation maintenance of DCS based controls & instrumentation. Core competence in installation & commissioning field instrumentation, design & logics/programming of DCS / PLC- Honeywell make & Modicon make

E&I Superintendent with a broad spectrum experience of electrical, instrument, and mechanical engineering acquired throughout a thirty year career. 27 years of my experience represents working directly for the Client within the O&G industry, on multi-discipline task force projects, including PMT.

QC, NDT, PIPING & WELDING INSPECTION, RTFI, MT, PT, PMI, FERRITE NO,H ARDNESS TESTING, PWHT, PRE HEAT, HYDO/PNEUMATIC TESTING, LINE CHECK, FABRICATION, ERECTION,C OMMISSIONING

Nineteen (19) years experience in the construction industry including two (2) straight years in Saudi Arabia with an outstanding performance. Exposed to various fields (Construction of Roads & Bridges, Hotel, Residential, Commercial and Industrial buildings including Oil & Gas Industry) in Civil En

To work at Corporate Level with Hard Work & Honesty

Versed in Production and Manufacturing of MIG wire as well as hands on experience in Planning and Manufacturing for turnkey Projects.

Diploma in Quantity Surveyor

Focused well-defined skills in engineering, program/project management, industrial and commercial construction, financial systems, profit and loss, proposals and negotiations.

Recruitment Specialist/HR Generalist

SDS2, Xsteel, AutoCAD Steel Detailer.

Telecommunication, Health, Safety, Environment and Security Coordinator

ITI in Draughtship

Create learning opportunity to work in architectural firm and deal with many graphic jobs.

ASE CERTIFICATIONS: Drive Train / Engine Repair / Manual Drive Train / Axles / Suspension / Steering / Brakes / Fuel Line Distribution / Heavy / Medium Truck Technician.

HVAC Skills

Project Engineer (Instrumentation & Control)

System Administrator, Server Support, Network Administrator, Desktop Support, ADS, DHCP, CCNA, MCSE

Construction Electrical and Instrumentation Engineer

Qa/Qc Inspector

I am a highways designer, designed more than 50 link roads, 2000 kms length all over Egypt, Yemen repuplic, & KSA.Using thelatest versions of Autodesk, Also I have a good expeience in the field of design Water & Waste Water networks

Professional Engineer experience in cleanroom design, construction, installation, testing and commissioning of cleanrooms (HVAC and architectural) for semi-conductors, pharmaceuticals and laboratories.

I describe myself as Sincere and perseverance to Hard work. I had completed my Bachelor of Civil Engineering in First Class From a reputed institution in Tamil Nadu, India.

Bridge Design / Bridge Management Sysytem

An electrical engineer, having 4 years of experience in high voltage side and have got testing and commissioning,design and maintenance experience. i am an indian and would like to get an oppertunity in reputed companies.

About 9 years+ experience in cement industry in mechanical maintenance (preventive, predective and corrective maintenance, compterised maintenance system), worked as section incharge for mills,Kiln, energy conservation, costing techniques.

Greetings, I'm available to provide survey services. I'm experienced in "base camp" situations and logistics.

10 plus years in construction from heavy civil, to residential. MAinlt bridge and highway building

Geotechnical Engineer

I have recently finished my undergraduate study in Mechanical Engineering, Institute Technology of Bandung, Indonesia. I am looking forward to having a career which has strong relation with my educational background.

I have over ten years in the asphalt plant field. I am willing to relocate to just about anywhere in the world for the right job

Company Accountant with ten years experience including chartered accounting, manufacturing and construction including three years experience in Papua New Guinea. Looking for another "expatriate" company accountant position. Available March 2004.

Working in the Kingdom of Saudi Arabia for the last 9 1/2 years. Well experienced in the design and execution of all types of HVAC systems, plumbing systems including water supply, Sewage/drainage system and Fire fighting system.

Results-oriented, Construction site Engineer with 7 years of experience in all facets of the Industry. Verifiable track record for successful completion of many projects.

Red Seal/Interprovincial Journeyman Welder with B-Pressure equivalent & CWB certification

First Prev 51 [ 52 ] 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out