Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #62153 next resume »»
CONTACT INFORMATION:
View contact information...

Education

01/2008 - present Masters of Science, Mineral Economics, Colorado School of Mines, Golden, Colorado, USA
* Includes 6 transfer credits from the University of South Florida (Tampa, Florida, USA) completed between 2005-2006.

02/2007 Construction Project Manager Course, The Associated General Contractors of America, Dallas, Texas, USA

02/2004 GIW Slurry School, Augusta, Georgia, USA

08/1997 – 12/2002 Bachelors of Science, Mining & Minerals Engineering, Virginia Tech, Blacksburg, Virginia, USA
Additionally completed courses in Accounting & Economics

09/2001 – 04/2002 European Mining Course (EMC), 48 ECTS credits

2 months Helsinki University of Technology, Finland
4 courses, among 'Mining Technology and Economics'

2 months Imperial College, London, England
4 courses, among 'Mine Project Evaluation and Financing'

2 months RWTH Aachen, Germany
4 courses, among 'Environmental Issues'

2 months University of Technology, Delft, The Netherlands
4 courses, among 'Industrial Minerals'

Final group case study: 'Pre-feasibility study' for an iron ore project in Minnesota, USA under supervision of Corus Steel Ijmuiden, The Netherlands

Working experience

10/2006 – present HARRISON WESTERN (Lakewood, Colorado, USA)
Project Manager, Underground Mining
* Effectively managed all aspects of engineering, safety, personnel, budgeting, cash-flow forecasting, and scheduling
* Springer Mine, Golden Predator Mines Inc., Imlay, Nevada, 1/08 – present o Tungsten Narrow Vein o Adit rehabilitation, hoist re-certification, etc.
* Henderson Mine, Freeport-McMoRan, Empire, Colorado, 10/06 – 1/08
o Molybdenum Block Caving o Responsible for contract underground construction activities

05/2001 – 10/2006 MOSAIC FERTILIZER, LLC. (Mulberry, Florida, USA)
Permitting Engineer, 2/06 to 10/06
Operations Shift Supervisor, 2/05 to 2/06
Operations Engineer, 1/03 to 2/05
Mine Planning Co-op, 5/01 to 8/01
* Completed mine-wide permit mods for the Army Corp of Engineers and Florida Dept. of Env. Protection
* Frontline supervision of mining & processing of a 60M / 7M TPY union mine / plant with 250+ personnel
* Performed metallurgical test work and analysis on screens, hydrosizers, and misc. flotation equipment
* Identified material handling systems efficiency opportunities yielding annual savings over US$7M
* Invented software widely used to design, evaluate, and optimize series pumping systems (patent-pending)

01/2001 – 12/2002 MINERALS & COAL TECHNOLOGIES INC. (Blacksburg, Virginia, USA)
Part-Time Research & Development Engineer
* Conducted flotation and dewatering analysis of various mineral samples using novel reagents

05/2000 – 08/2002 ILUKA RESOURCES INC. (Stony Creek, Virginia, USA)
Mine / Process Engineer Co-op, 5/02 to 8/02, 5/00 to 1/01
* Carried out test work, mtce, & repair on Kelsey jig, spiral, magnetic, & high-tension separation circuits
* Gained experience with Datamine, ArcView, & AutoCAD with the development of short and long term plans
* Provided engineering assistance on a US$32.4M expansion project increasing plant throughput by 50%

06/1999 – 12/1999 GRANITE CONSTRUCTION COMPANY (Sacramento, California, USA)
Mine Engineer Co-op
* Managed construction and operation of a union sand & gravel and asphalt batch plant with 15 employees
Presentations / Publications

10/2004 "New Pit Pump Development and Field Experience", by Richard E. Bishop and Graeme Addie (Vice President Engineering and Research & Development, GIW Industries, Inc.). Paper presented at the 19th Annual Regional Phosphate Conference, (October 14-15, 2004), Lakeland, Florida, USA.

09/2004 "Improving Slurry Transport through Computer Simulation", by Richard E. Bishop. Paper presented at the September Florida Section SME Meeting, (September 7, 2004), Bartow, Florida, USA.

Language skills

English: mother-tongue
German: moderate
Spanish: fair
Slavic languages: working knowledge

Computer skills

Office Programs: Word, Excel, PowerPoint, Access, Visio, FrontPage, Project, Outlook, Publisher
Programming: Visual C++, Turbo Pascal, Visual Basic
Software: ArcGIS, AutoCAD, Minitab, Primavera, Stata, Vulcan

Memberships & Positions of trust

2008 – 2009 Chairman: SME Young Leaders Committee
2007 – 2008 Vice-Chairman: SME Young Leaders
2006 – 2008 Vice-Chairman: SME Young Leaders Selection Committee
2006 – 2009 Member: SME Young Leaders Committee
2006 Chairman: Regional Phosphate Conference (Lakeland, FL)
2005 – 2006 Chairman: SME, FL Chapter
2004 – 2005 Vice-Chairman: SME, FL Chapter
2003 – 2004 Vice-Chairman: SME, FL Chapter
1998 – present Member: SME
1996 – 1997 Class Vice-President
1995 – 1996 Class President
1994 – 1995 Class President

Activities & Honors

2006 SME M&E Division - Outstanding Young Professional Award
2005 DSK Underground Coal Training Mine: Herne, Germany
2002 Mine Rescue Course: Saarbrücken, Germany
2002 Who's Who Among American College Students
2001 WAAIME Student Award
2000 WAAIME Student Award
1998 – 2001 Virginia Tech Mining Competition Team
1999 Pit & Quarry Student Award

Certifications

2003 Six Sigma Green Belt
2001 Engineer in Training (EIT)

Other activities & interests hiking, investing, mining history, running, skiing, travel

View contact information...
«« previous resume next resume »»
Search Results (Resumes 3851 to 3900 of 4814)Go to Search Parameters...
Brief Description
A high qualified mechanical engineer, Looking for challenging and rewarding career. My major Industry experience has been with a CAT Dealership in KSA; however my Sales & technical skills give me versatility within any Business which seeks excellence in product support functions.
Expediting Supervisor, Oil and Gas, Marine, Petro Chem
I am an Environmental and Chemical Engineer, working in an oil and gas sector as an EIA specialist at Kuwait
I am a Canadian, "Hands-on", Project Manager/Superintendent interested in International work again. My extensive experience is in Heavy/Civil and Oil & Gas Pipeline Construction. I have a reputation for completing on-time, safe and cost-effective projects in various climates and nationalities.
licensed automotive technician(redseal endorsement)other skills, welding, autobody, automotive electrical
Apprentice Heavy Equipment Operator available for immediate Employment. Current Class A License. Trained in several types of Heavy Equipment. Some training in Grade checking/surveying. HAZWOPER Certified.
Multi tasked in the construction filed. SAP 4.6, Lotus Notes, Act, JD Edwards, Microsoft, Access, Material handler, Tool-Room, A/P & A/R, Procurment, Human Rescources duties
HSE Manager, Advisor for International Oil/Gas Company, Led Assets to top quartile performance. Graduate engineer and Certified Safety Professional
I have 8 Years exp in Oilfields & industrial: as an instrument forman to maintain all process erlated instrumentation works includes automation
QA/QC in Air cooled Heat exchangers, Boiler,Structurals, Wind mill tower, Mines equipments,etc..
Very experienced in Logistics, Procurement, Warehousing, Material Control.
Barge Master, Barge Superintendent, Rig Mover, Marine Coordinator, CSR, Operations Manager 24 years experience in offshore Construction and Drilling
Vast Experience in Document Control, Administration, Human Resourses and IT
I have previously worked as a Mechanical Engineer for a Japanese EPCC Company (Shinryo Malaysia Pty Limited) for five (5) years specializing in Quality Assurance / Quality Control. My last project for Shinryo Malaysia was for Malaysia’s largest Oil & Gas Company Petronas in Helsinki, Finland.
Hands-on engineering and construction individual with extensive experience in all stages of the industry, project & site support, field & maintenance engineering, technical expertise and interpersonal skills in order to function within a multi-discipline team or operate within a stand-alone environm
W/WW industry: 28+ years experience in construction & operations and maintenance; electromechanical and site management skills; specialist in process component of W/WW systems
Mining Engineer with surface, underground, contracting, industrial minerals, metal mining, hard rock mining, block caving, narrow vein, cut & fill, dragline, international, process, frontline shift supervisory, mine planning, & permitting experience
Licensed professional civil engineer. Have worked mostly in construction as either an owner or an owner's representative. Enjoy doing field work and would like to work in a foreign country.
HR, Payroll, Operations
Professional Engineer, MBA, offshore oil & gas, Quality management, 11 years
Extensive experience in supervision and inspection of structural and architectural works for high rise buildings, residential, commercial, industrial, roads and bridges and large infrastructure with an over all responsibility for successful and timely project delivery
I am an Multi Skilled Engineer Currently working at Road Development Authority, Sri Lanka
MIT educated program manager/engineer seeks full-time employment in engineering, financial modeling/investing, or engineering management involving optimization, system identification, simulation, graphical user interface design/implementation, and/or control system design/analysis.
I am Diploma Engineer with total 6+ Years of experience in various engineering field, particularly 5+ years of experience in piping/pipeline Design Engineering for Onshore projects. Presently working as a Pipeline Designer for M/s. Worley Parson Engineering LLC., Oman
Bachelor of Engineering_3 years experience in petrochemical construction field
A position where I can use and enhance my Linux/Unix, POS, PKI, Smartcards and network security skills in a company where I can contribute with many years of hands-on experience
Systems Engineer - Project Planning & Control Specialist. Oil & Gas / HVAC / Construction
Hand and computer skills+designs, calculation and workshop drawings+site coordination
Project Manager (Electrical, Alarm Applications, Construction,Safety)
Perform environmental / safety audits Perform industrial hygiene surveys industrial processes, sewers, wells & tanks air, soil, solid waste, wastewater and water minimization and disposal of non-hazardous and hazardous waste potential or existing hazards for a wide variety of manufacturing OSHA
AUTOCAD
Civil engineer with 7 years experience.
Mechanical CAD Design Product and Tooling Development Engineeer
Extensive experience in Civil Engineering CAD Designer/Drafter field, in positions requiring supervisory, administrative, analytical and IT skills
Skills in various disciplines such as Welding Inspection, Plant Inspection which includes static equipments and piping, Material Testing, Failure Analysis and Lifting Inspection.
Long term experienced : wanted , Painting Inspector , Paint Superintendent or Technical Sales
•Fabrication, Erection & Inspection of piping using CS, SS, GRER. •Preparation of Piping Test Packages, Mechanical Clearance Inspection & Pressure Test Inspection with Client. •Controlling of test packs from Site & QC department.
Extensive experience in Engineering, Scheduling, Cost Control and Quality Assurance in Power Generation, Bio-technology and Manufacturing industries.
I have been trained and have experience integrating the spectrum of the logistics processes within the operational, acquisition, and wholesale environments. The major logistics processes include distribution, materiel management and contingency operations. Duties included directing and managing dis
Sr. Planner, Scheduler, Risk Management using Monte Carlo Simulation
Design and Construction, Engineering, Calculations, Quality control, Installation and Start Up of new Equipment, Electrical and Electronics Repair and Maintenance
Hands-on skill in Allen Bradley PLC, SLC, Panel Builder 32, RS logix, Frequency Drives,HMI software, SCADA-DCS, Industrial Mechanics and in Broadcast Transmitter.
Bachelor of Engineering (Electronics & Instrumentation) & Master of Technology (Process Control & Instrumentation). Experience in Advanced Process Control & Instrumentation. Total years of experience: 3 Years
Over 20 Years Experience Process Operator,Commissioning and Start Up Heavy Oil ,Oil and Gas Production
Trucking experience 20 plus years, good on tools, excellent mechanical understanding
15-years of experience as Document Controller for vendor & design documentation in gas and oil industry.
Experienced electrical sales, buyer, customer service,contract negotiations,job bidder
I am Aldrin Entac, male, single and 26 years old. My Present work Exposed me in Construction Site, working on ELV system Company as a Site supervisor for BMS (Building Management System) Structured cabling System,Security System, Audio Video System, Broadcasting System, GSM System, TETRA System etc
Land surveyor with over 30 years experience
Electrical, Instrumentation, SCADA
First   Prev   51   52   53   54   55   56   57   58   59   60   61   62   63   64   65   66   67   68   69   70   71   72   73   74   75   76   77   [ 78 ]   79   80   81   82   83   84   85   86   87   88   89   90   91   92   93   94   95   96   97   Last
Seach Parameters

Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com