Resume - More than 13 years post qualification experience out of which 7 years in Occupat...

Misco Jobs

Resume #6271

CONTACT INFORMATION:
View contact information...

Profession: HSE ADVISOR
Date of Birth: 31st May 1972
Nationality: Indian
Languages known: English, Hindi, Malayalam and Arabic
Driving License: Holding Valid UAE Driving License

Marital Status: Married

Education And Professional Status:

ƒ³ Diploma in Civil Engineering (First Class Passed in the Year 1991).
ƒ³ NEBOSH National General Certificate in Occupational Safety and Health.
ƒ³ NVQ - Level 2 (National Vocational Qualification Level-2 in
Scaffolding) Certified by C.I.T.B. Reg. No.: 1018167
ƒ³ Doing NVQ 4 in Occupational Safety and Health from Institute of
Occupational Safety and Health and achieved 3units.

Additional Qualification:

ƒ³ Well conversant with ADCO and ADMA-OPCO Das Procedures, Safety Regulations and Work Permit System.
ƒ³ Holder of Valid Permit Signatory Card from ADCO and ADMA-OPCO.

Safety Courses Attended:
ƒ³ First Aid Course ƒ³ Basic Environmental Awareness
ƒ³ General Safety ƒ³ Breathing Apparatus
ƒ³ New PTW DAS Procedure ƒ³ Basic Fire Fighting
ƒ³ P.T.W. System ADCO ƒ³ ADCO Document for Safe Driving (ADSD)
Course

Scaffolding Courses:

ƒ³ Scaffolding Induction Course by Arabian Bureau Of Services

Key Professional Experience:
More than 13 years post qualification experience out of which 7 years in Occupational Safety and Health, (4.5 years in oil and gas sector) interested in the development of modern techniques in the construction and oil field industry.

10/04/2003 To Date:

Company: HILAL BIL BADI & PARTNERS CONTRACTING COMPANY

Position: Safety Engineer

Project: Construction of North East Bab Phase-1 Development
Infrastructure- Al Dabbiya. The project consists of construction of 53km roadway and 5 cause ways

Client: ADCO

Profile: ADCO is a unit of Abu Dhabi National Oil Company (ADNOC)
and it is located at 89 Kilo Meter away from Abu Dhabi.

Job Description:
ƒ³ Develop and Implementation of ADCO Health Safety Environment
Management System Procedures, Rules and Regulations.
ƒ³ Preparation of HSE plan, Waste management plan, Emergency evacuation plan and procedures, and Traffic management plan for the project.
ƒ³ The above plans were prepared for other tendering works.
ƒ³ The documentation work for the project.
ƒ³ Dealing with major hazards like road traffic; underground and overhead
11 Kilo Volt power lines; environmental aspects, heat stress and vehicles sinking/ overturning in water logged areas etc.
ƒ³ Conducting HSE inspections and recommendations on daily and weekly basis, taking actions to follow-up.
ƒ³ Fulfills ADCO requirements from time to time.
ƒ³ Traffic diversion- getting approval from the client; provide guidance to control traffic on narrow roads, proposing alternative roads to reduce the high potential risk etc.
ƒ³ Follow method statement, identification of hazards, risk assessment-
passing corrective actions required.
ƒ³ Conducting onsite and in house training, enhancing the HSE knowledge among employees.
ƒ³ Conduct safety induction, toolbox talk to encourage all personal to take active participation in HSE programs.
ƒ³ Advise the management to upgrade safety standards.
ƒ³ Advising project manager and other site managerial personnel about workplace safety, and precautionary measures to be taken.
ƒ³ Monitor daily work activities of site with the assistance of two Safety Officers.
ƒ³ Attending weekly progress meeting with client, conduct monthly HSE meeting
ƒ³ Carrying out accident investigation, cost analysis and advise management with corrective measures to prevent the recurrence
ƒ³ Regular audits on P.T.W. system and maintain records.
ƒ³ Conduct emergency evacuation training and drills
ƒ³ Encourage employees to raise Near Miss reports
ƒ³ Assessing employee's awareness on HSE and conducting incentive award program with the help of management etc.

July 2001 To February 2003:

Company: Impregilo Rizzani Deeccher Joint Venture
Position: Scaffolding Safety Advisor
Contract: The Grand Mosque for Sheikh Zayed Bin Sultan The Second Abu Dhabi
Profile IMPREGILO is one of the leading multinational company¡¦s, which constructed the 3rd largest mosque (Area- 70000 Meter2) in the world in Abu Dhabi.
Job Description:
ƒ³ Development and implementation of company safety plans, policies and procedures, and will report back to management on a routine basis of findings.
ƒ³ Conduct Training and maintain records.
ƒ³ Monitor safety compliance on site on a daily basis.
ƒ³ Coordinate with Management and safety personnel on safety issues.
ƒ³ Assist with accident investigations.
ƒ³ Develop; motivate all personnel on Health and Safety aspect.
ƒ³ Provide safety advice for project management.
ƒ³ Acting as member of emergency response team.
Types Of Scaffolding Erected:
ƒ³ DOKA Heavy duty Tower Scaffolding with PERI girder platform work of height 75 Meter for Domes (6000 Meter2 area)
ƒ³ Heavy Duty Circular Praticus Scaffolding with PERI girder platform work of height 35 Meter for Domes.
ƒ³ General purpose Independent Praticus Scaffolding of height 25 Meter.
ƒ³ General purpose Cantilever Praticus Scaffolding of height 9 Meter.
ƒ³ Cantilever Bracket platform with PRATICUS Scaffolding work for Minarets of height 104m and area 45 Meter2

January 1998 To May 2001:

Company: Costain Abu Dhabi Company
Position: Civil & HSE Coordinator
Contract: ADMA-OPCO Municipal Maintenance Contract Das Island, Abu Dhabi.
Profile: ADMA-OPCO is a unit of Abu Dhabi National Oil Company (ADNOC) and it is located at 181 Km away from Abu Dhabi.
Job Description:

ƒ³ Prepare and conduct internal HSE audit for company site, review, take corrective actions on shortfalls, participate on task risk assessment.
ƒ³ Prepare and conduct Safety training sessions.
ƒ³ Participate in ADMA-OPCO HSE - Management System meeting, company monthly HSE meeting
ƒ³ Conduct toolbox meeting.
ƒ³ Carryout regular audits on PTW system (cold work, hot work, excavation, confined space work), maintain and control daily HSE practices with regular checks in all working locations, ensure that hazards are identified and precautionary measures are taken both in plant area and municipal area.
ƒ³ Conduct accident/ incident investigations, reports on major accident, minor accident/dangerous occurrence, and near miss situations, submit findings and recommendations to management to prevent recurrence.
ƒ³ Conduct safety induction for new personnel and visitors.
ƒ³ Prepare safety questionnaire and conduct quiz competition to the employees in each weekly safety meeting and award the prizes for the winners as a motivation
ƒ³ Encourage to raise Near Miss reports and award prizes for identifying 8 number Near Miss Reports
ƒ³ Responsible for the Civil Engineering Construction, Maintenance, Repair Works and HSE aspects on Das Island.
ƒ³ Directing and supervising through the Foremen, the work of skilled tradesmen in providing a Civil Engineering Construction, Maintenance and Repair Services throughout the Das Island. Performing Supervisory functions at a level established by management for this position.
ƒ³ Receiving work orders and requests for work, checking what is required, estimating materials required, approves store requisitions, as necessary arranging for work and following new Permit To Work DAS Procedures, deciding upon priorities and passing work orders to the Foreman for execution.
ƒ³ Approving stores requisitions, signs purchase requests and passing them for further approval and assisting the Civil Supervisors and with amendments to the materials vocabulary and discussing minimum stock levels.
ƒ³ Performing other related duties such as ensuring compliance with safety regulations, preparing special reports, preparing Hot Work Permits, Excavation Permits, Entry Permits, Road Closure Permits, Cold Work Permits etc.
ƒ³ Work carried out at Process Areas such as Zakum, Ummshaif, Bunduq, Plant Control Rooms, Dehydration/Desalting Plants, Flares Area, Oil and Water Separation, Storage areas, Electric Power Distribution Areas, Utilities, Telecomms, Airport, Harbour, Tanker Berth, Accommodation Areas, Government Offices, Police Station, Sheik Palace, Restaurants, Guest Houses etc. preparing daily reports to the Civil Supervisor on activities.
ƒ³ Frequent contacts with all branches and sections on the Island Including, with Government Officials and with Contractors at equivalent and often more senior levels.
ƒ³ Reporting to Civil Supervisor within these parameters planning and organizing work in deciding priorities in setting standards and in checking and accepting completed work.
ƒ³ Supervising 6 Foremen with 80 subordinates.

January 1996 - January 1998:

Company: AL SAFA Contracting Company, DUBAI.
Position: Civil Engineer
Project: Extension of library building at Hor Al Anz, (Dubai Municipality work).
: Ground+4 - Residential Flat at NAIF
: Villas construction at Jumairah
Job Description: Estimation, Quality Control, Site Supervision of Civil Works, Plumbing, Painting, Electrical Works, False Ceiling, Fire Fighting Works, Foam Concrete, Water Proofing Works.
July 1994 - July 1995:

Company: Hajies Rashid. Al Subeie Establishment Kingdom of Saudi Arabia.
Position: Site Engineer
Client: Arabian Oil Company Limited.
Profile: Arabian Oil Company, Al -Khafji is one of the highest oil producers in Kingdom of Saudi Arabia. Hajies company is one of the reputed contracting companies based on Arabian Oil Company tendering jobs.
Job Description:
Tender works: Analysis of rates for tenders, estimation, tender submission - Site Supervision of all civil along with sub contracting works, Material Approvals, Quality Control, Fulfillment of Client Requirement, Certification of Running Bills, Office Correspondence and Handing Over Sites etc.
Performing other duties such as ensuring compliance of safety rules and regulations, preparing Hot Work Permit, Cold Work Permit, Excavation Permit, Entry Permit etc, and training of manpower for awareness on safety.

Nov 1993 - July 1994:
Company: Shapoorji Pallongi & Company Limited, India
Position: Junior Engineer
Client: Engineers India Limited, Delhi, India
Project: CDU/VDU units for Mangalore Refinery and Petrochemicals Limited. (MRPL).
Profile: Mangalore Refinery & Petrochemicals Limited (MRPL) is located at 35 Kilometers away from Mangalore City (Onshore) and it is one of the biggest Refineries in Karnataka, India.
Job Description:

For Technological Structure - Inspection and Supervision of Civil Works, Surveying, Construction of Imported Machinery Foundations and Quality Control etc.

July 1991 - July 1993:
Company: General Construction Company, India
Position: Site Engineer
Client: Kasturba Medical College Planning Division Manipal, India
Project: Manipal Academy of Higher Education -University Building.
Job Description:
Estimation, Quantity Survey, Quality Control, Material Approvals, Inspection and Supervision of Civil Works, Plumbing, Electrical, Certification of Bills and Office Correspondence etc.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1551 to 1600 of 4498)

Go to Search Parameters...

Brief Description

is a supply professional in mining and construction. He has a proven track record of fulfilling all facets of procurement, material handling and inventory procedures.

EXPERIENCE PROFILE (7 YEARS)

I am a Full Member of International Institute of Risk and Safety Management (MIIRSM) and Technician member of Institute of Occupational Safety and Health (Tech IOSH) .Have expertise in working in ISO-9001, IS0-14001 and OSHAS 18001 environments.

MEP Manager with 14 years of int'l exp. in construction. Verify design, construct and commission. Executed prestigious & high rise buildings project which MEP works value in excess of US$380 M. Supervise and coordinate work acc. to contract ,budget, time, co. procedures & ensure client satisfaction.

site engineer for a land development project that covered earthworks and HE utilization, roadworks, driange, waterline and housing projects on mass housing and medium scale units

i have passed Degree(B.E.) in mechanical engineering with spl. in welding technology and now i am working as a welding engineer in boiler making company from 2 and half year. my job profile is making WPS,WPQ,PQR, TDC, and shop floor inspection.

i am 25 and in sydney on a 12 month visa im from England,i have a NVQ level 2 in bricklaying and concreting i have 5 years experience.

MECHANICAL ENGINEER WITH EXPERIENCE IN DESIGNING

VP metallurgist with MBA. Extensive experience with 20+ years experience in manufacturing and operations, working in the USA, Canada, and Australia.

A proven Boiler Maker/ Combination Welder highly skilled in the areas of aluminum, ferrous and non-ferrous(CS, SS), exotics(Alloys), and next generation metals. Qualified under ABS, AWS, ASME, NAVSEA and Mil-Standard 248 to do all plate and pipe welding on non-nuclear systems.

I have 4 years experience as a document controller with Al Ghandi & Consolidated Contractors International Company (L.L.C.) in U.A.E. and 1 year experience as an Assistant Accountant with World of Martial Arts in Pakistan.

Aspiring to achieve a good position in the hi-tech industry as a Reliability Engineer, which encourages learning, creativity that provides exposure to new ideas and that stimulates personal and professional growth.

12 years experience in painting working with contractor also at bnfl working closely with chemicals

3 years of solid experience in all formwork designs.

I am working with ABB LTD. as a project engineer, looking after the erectioon and commissoning of Electrical equipments.I have completed my graduation from KUK Univ in 2003 in Electrical.

A Certified Human Resources Professional with practical and progressive experiencein Africa, Central America, Canada, USA, Central Asia and the Asia-Pacific region.

A Wide experience in drafting in major of civil works, structural, mechanical, Piping & Instrumentation and architectural drawings, 8 years of overseas experience,Overall 15 Years of working experience in civil, structural, mechanical, piping, and architectural firms

More than 13 years post qualification experience out of which 7 years in Occupational Safety and Health, (4.5 years in oil and gas sector) interested in the development of modern techniques in the construction and oil field industry

Welding all rod types: M.I.G., T.I.G, all plastics, oxyacertylene. Equipment repair and maintenance of all machinery for use in metal working shears, brakes, manual cutting, machine cutting. All machine shop equipment, lathers, radial arm, drill presses, and iron works.

Electrical Engineer ( project & design) with more than13 years of experience with MNC in India, Japan , Middle East for Oil and Gas, Petrochemical, Chemical, Power.

PROFILE: Proficient in shuttering works, Steel reinforcement & fabrication, pipe fittings

I am a Senior Planner/ Project Controller with certified versatile capabilities and experiences in different fields of construction, including, but not limited to, Building construction, massive civil work, industrial construction, petrochemical construction, commercial complex and high rise buildin

Administrative, Sales, Strong Customer Service

15 years Accounting / Administrative experience in Australia. Currently visiting South Africa but ready to move on and explore more of the world.

Extensive management, administrative, financial and contractual experience.

To secure a position with a progressive firm utilizing my diversified material management capabilities.

Having six years of experience in managing various geotechnical projects with expertise in planning and execution of geotechnical investigations for mega industrial project sites incorporating all significant aspects.

Objective: To find a position to utilize and challenge the skills, which I have acquired, with the opportunity for advancement.

Fifteen years experience in Process Plant Construction in the UK, Europe, Middle and Far East with regards to QS duties and Contract Administration on behalf of the Contractor.

I am looking for the right company to commit to long term. I am willing to work overtime and travel. I have my own tools and transportation.

have skills and knowledge in science information technology and industrial engineering.

Qualified Welding Inspector

In my years of experience, I have gained a specific and wide knowledge of essential aspects of both the purchasing and distribution of products used in industrial environments that are essential to the growth of our market.

I graduated from universtiy in June and have been working as a quantity surveyor. I worked as a trainee M&E quantity surveyor for two years before university and worked my university placement in the Turks & Caicos Islands where I currently work.

Electrician 309A/fire alarm technician

I am a certified tool and die maker. I have design ability and 7 years hands on experience build automotive tooling. From design analysis to raw material to finished working/conforming automotive tooling.

Mechanical Enginner with two years experience in designs for commercial, domestic and retail buildings specialising in HVAC, water supply and waste reticulation.

Electrical & electronic trouble shooting, Sales

I have 25 years experience in hoisting & lifting operations within the oil & gas industry

35 years nursing experience in most disiplines

Engineering experience of construction projects; piping system and water resources

Erection, Calibration and Commissioning Engineer

B.E. Civil Engineer + PGDIDM, 2.7 Yrs Exp., Unitech Ltd.

Reciently graduated civil engineer looking for a position related to civil engineering, like construction, town-planning, transports, site engineering

Specliazation in 6g welder

Able to design using Prokon, Oaysys, Excel and Manual Design in both structural steelwork and Reinforced Concrete

I am willing to relocate my current company is closing. I love working on construction sites and prefer to stay in the mining or construction field

I am a Mechanical Engg graduate, with 9 years experience in various projects, out of which 7 years at Jacobs H&G Private Ltd. (an associate of Jacobs Engineering. Inc. USA), in ISO 9001 environment.

An Engineer with business acumen, client awareness, practical skills, overseas experience and sound engineering knowledge.

Construction Project Manager

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 [ 32 ] 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out