Resume - welding inspector structural,piping and coating inspector

Misco Jobs

Resume #65107

CONTACT INFORMATION:
View contact information...

Nationality: Indonesia
Place/Date of Birth: Medan/ Oktober 10, 1974
Sex: Male
Status: Married

SUMMARY OF QUALIFICATIONS:
------------
5.5 year working fabricator oil&gas as position QC welding inspector,3 month working as position Coating Inspector

------------

OBJECTIVE:
------------
welding inspector structural,piping and coating inspector
------------

WORK EXPERIENCE:
------------
* 22October 2007 Up to Present, QC Welding Inspector Stuctural.PT Oil & Gas Technologi PTE LTD
Tasks & Responsibilities:
* QC Structural Inspector
- Handling In Progress inspection of Structural & Fabrication Shop Including Material Tracebility
- Handling Welding Inspection Fit-Up,Visual Inspection,Dimensional spool
- Cek NDT requirement and material take number report of the assigned project
- Ensure All NDT carried out as per specification and coustumer requirement
- Laison with client and all Quality matters
- Release Inspection.
- Prepares necessary documents and Quality Control Inspection reports including punch list
- Witness of Material identification and Verification
- Handling in Welder test Qualification.

Project Handled:
ƒá MAARI FIELD DEVOLOPMENT FABRICATION AND INSTALLATION OF GRILLAGE & SEA FASTENING (CLOUGH PROJECT OMV NEW ZEALAND)

* Agust 2007 Up to 15 Oktober 2007, QC Welding Inspector Piping.PT Edaran Profab PTE LTD Mechanical Construction
Tasks & Responsibilities:
* QA/QC PIPING INSPECTOR
- Handling In Progress inspection of Piping & Fabrication Shop Including Material Tracebility
- Handling Welding Inspection Fit-Up,Visual Inspection,Dimensional spool
- Cek NDT requirement and material take number report of the assigned project
- Ensure All NDT carried out as per specification and coustumer requirement
- Laison with client and all Quality matters
- Release Inspection.
- Prepares necessary documents and Quality Control Inspection reports including punch list
- Witness of Material identification and Verification
- Handling in Welder test Qualification.
Project Handled:
ƒá FPSO BELANAK FIELD DEVELOPMENT, KBR AND CONOCOPHILIPS PROJECT
* June 2007 Up to Agust 2007, QC Coating Inspector.PT Cladtek International PTE LTD BI-Metal Pipe Clading
Tasks & Responsibilities:
* QA/QC COATING INSPECTOR
- Handling In Progrees auto blast machine,cek grit and temperature machine before blasting
- Witnees equipment blasting
- Cek Visual material before blasting
- During blasting cek wet and dry room with hygrometer and wet and dry digital
- Cek relative humidity with humidity digital equipment
- After blasting cek propile inteal and external pipe with comparator and boroskop
- Release pipe after blasting.
Project Handled:
ƒá HASDRUBAL ONSHORE &OFFSHORE PIPELINE (BG TUNISIA)
ƒá HARWEEL CLUSTER PHASE2 DEVELOPMENT PROJECT OMAN (PETROFECT)

* January 2006 Up to May 2007, QC Inspector ( Structural ) Dept,J Ray Mc Dermott Batam Fabricator Yard.Indonesia
Tasks & Responsibilities:
* QA/QC INSPECTOR
- Handling In Progress inspection of Structural & Fabrication Shop Including Material Tracebility
- Handling Welding Inspection Fit-Up,Visual Inspection
- Cek NDT requirement and material take number report of the assigned project
- Ensure All NDT carried out as per specification and coustumer requirement
- Laison with client and all Quality matters
- Release Inspection.
- Prepares necessary documents and Quality Control Inspection reports including punch list
- Witness of Material identification and Verification
- Conduct visual inspection of beam,angle and other material.
- Make workpack with compare to inspector realese.
Project Handled:
ƒá WOODSITE ENERGY LIMITED, FOSTER WHELEER PROJECT LNG PHASE V EXPANSION 75 MODULE BURRUP PENINSULA,WESTERN AUSTRALIA
ƒá CPP KERISI DEVELOPMENT PROJECT,CONOCOPHILIPS
ƒá ANGEL GAS PROJECT WOODSIDE

* Mei 28, 2003 ¡V September 30, 2004, as a QC Inspector Certification (NDT technicians, Piping, PMI, Material Traceability), Quality Control (QA/QC) Dept, J. Ray. McDermott Batam Fabrication Yard, Indonesia
Tasks & Responsibilities:
* QA/QC INSPECTOR
- Handling In Progress inspection of Structural & Fabrication Shop Including Material Tracebility
- Handling Welding Inspection Fit-Up,Visual Inspection
- Cek NDT requirement and material take number report of the assigned project
- Ensure All NDT carried out as per specification and coustumer requirement
- Laison with client and all Quality matters
- Release Inspection.
- Prepares necessary documents and Quality Control Inspection reports including punch list
- Witness of Material identification and Verification
- Conduct visual inspection of beam,angle and other material.
- Make workpack with compare to inspector realese.

* QA/QC Document Controller (Certification)
- Typing and generation of spread sheets.
- Prepare NDT drawing and filling NDT drawing As per project.
- Make report package,weld summary,NDT Joint, Hydrotes.
- Assures safe usage of radioactive equitment and personal whitin the yard.
- Pursues the acceptance of the Project Certification with the coustomer and Certifying Authority
- Cross checks Operators/Tecnicians.
* Material Inspector
- Cek heat number material,and compare to material receving
- number material,and compare to material receving
- Prepare Heat Number Material
- Make report material and bill off material
- Submitt to client report from material transbility
* Positive Material Inspector (PMI Inspector)
- Compare NDT Drawing Piping
- Inspection to joint and shot material with metorex
- Make report positive material identification and submit to supervisor
- analisis material indentification asper shot material

Project Handled:

ƒá FPSO BELANAK FIELD DEVELOPMENT, CONOCOPHILLIPS
ƒá DAN FG FIELD DEVELOPMENT, MAERSK OIL & GAS
ƒá RANG DONG FIELD DEVELOPMENT PROJECT ( NCWI & NULQ), JAPAN VIETNAM PETROLEUM COMPANY
ƒá BELANAK FIELD DEVELOPMENT ( WHP 'A' & WHP 'B'); CONOCO INDONESIA INC LTD

EDUCATION & CERTIFICATION:
------------
Educational background

1995 - 2001, " Electrical Engineering From Muhammadiyah Yogyakarta University" Consentrasi Control Engineering

Course Attended

* English Course Conducted by Learning Cottage Batam
* Positive Material Identification (PMI)/Metorex Condutected by J Ray McDermott Indonesia
* Traning Course Product by PT.Kawan Lama Sejahtera Batam
* Training Courses Coating & Painting Inspector by IKBAL-M-YOS BATAM approve by APITINDO & MIGAS Certificat No.60 CI-II/XII/2006
* Training MT/PT conduct by PT Mc Dermott Indonesia 2007
* Course Visual Welding Inspector CSWIP 3.0 Conduct The Welding Institute (TWI) Cert No:07/WIS1/BTM/282

ADDITIONAL INFORMATION:
------------
hiking,fishing

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 651 to 700 of 4363)

Go to Search Parameters...

Brief Description

MECHANICAL ENGINEER WITH A VAST EXPERIENCES IN REPAIR AND MAINTENENCES OF ALL CONSTRUCTION MACHINES AND PLANTS FOR ROAD MAKING INDUSTRIES.

Self-motivated, results-oriented professional with extensive international experience with multinational firms and government-owned facilities in the construction, shutdown, and refurbishing of oil, gas, petrochemical, and power facilities and plants.

Was employed in the capacity of safety and health officer in various project in Malaysia as well as India. With nearly over 15 years of experience in the construction industries

Civil Engineering and Land Surveying

Over 20 years in the Finance, Administration and Internal Audit Management

INDIAN LEGAL PROFESSIONAL (ADVOCATE) WITH 20 YEARS ADMIN/HR EXPERIENCE IN INDIAN AIR FORCE

I m land surveyor and my experience in all types of Survey work in road, Concrete structure, Buildings, Steel structure, Pipe lines, Drainage & Underground mines Survey.

Quantity and design engineering: which includes, quantity estimating for bidding purposes; claims preparation for project progress and accomplishments including quantity computations; plans and drawings preparation including designing; survey data computations; project scheduling; project monitoring

Internationally Experienced Heavy Equipment Mechanic - Workshop Supervisor

Young, energetic and high qualified engineer in construction works. Well experienced especially in Marine and Civil Construction in Midle East and Asia countries such as: UAE, Vietnam, Cambodia, Singapore, and Indonesia.

Quality Specialist experienced in Quality Management System, being aware of specific Inspection Techniques, including NDT Techniques and offering over 25 years experience in QA/QC environment acquired in Mettallurgy and Construction (Prestressed Concrete Cylinder Pipes and Oil&Gas Inst.)

Experienced heavy earthmoving machines and plant hire diesel mechanic with extensive knowledge of construction equipment, crusher plant, trucks and buses.

30+ years petro=chemical/construction QA/QC experience

MS in Civil and Mechanical Engineering, in Alaska, Russian and English language, experienced in Numerical Wave Modeling, Coastal Engineering, Hydrographic Survey, adaptable to changing projects and work schedules and have a proven ability to quickly train on different subjects.

Structural Engineer, Ph.D., P.E. 10 years experience in structural analysis/design of commercial and industrial buildings, and schools.

qa/qc engineer

Aerospace stress engineer with >5 years of experience with Static, Fatigue and Damage Tolerance Analyses of Boeing and Airbus Commercial Airplanes.

Mechanical engineering , designing equipments, welding engineering

Competent Project Controls specialist with Estimating, Claims Management and Risk Management skills. Experience spans 35 years in industries including Nuclear, Fossil and Hydroelectrioc power, Oil and Gas, Refinery and LNG plants. Multi-discipline estimating skills at all levels from FEL onwards.

M.S. Civil Engineering with an emphasis on Project Management. Skills developed while working as an Engineer with the South Carolina Department of Transportation and as Owner/Project Manager of multiple Residential Construction Projects

welding inspector structural,piping and coating inspector

A well versed user of AutoCADD 2208; Revit Architecture / Structural / MEP; Solid Works; 12d; Autodesk Viz

A challenging opportunity in the management, engineering or sales field

I have over 20 years experience in all aspects of electrical work i.e. construction, testing and inspection and commissioning both at home and abroad, onshore and offshore.

MOSCOW based all around professional with a solid track record in defining and executing project managements.

Qualified Civil Engineer-total of 16 years of experince in construction industry as Structural Engineer and Design Engineer in the filed of civil engineering and post tensioning of buildings ans bridges

Over 13 years of professional experience in all facets of highway engineering covering planning, design using MXROAD software and AUTOCAD, including widening of national highways and Expressways. Experience cover route selection of Highways, geometric design, pavement design of pavements etc.

I am a Civil Engineer with 8 years experience in executing several national constructional projects in Iran as a Quantity Surveyor, Site Engineer,Project Manager,Supervisor, Welding Inspector ans Surveyor.I am familiar with AUTOCD,SAP2000.WORD and EXCEL softwares.Also, I have the IELTS certification

Instrumentation and Control engineer

B.E MECHANICAL EQUIPMENTS AND HEAVY EARTH MOVING MACHNIRIES BATCHING PLANTS

I am working as a highway engineer from past 6 years. I have over 3 years of experience with MX design software, 2 years with Inroads one year with Land Development Destok. In my past experience I involved using Indian code, dutch codes and AASHTO codes.

Owned my own construction comany for 15 years, mostly excavation. had sole responsibility of all aspects on all projects. 1,000,000 to 2,000,000 range

My name Issam working as a civil supervisor , i was born in Latakia- Syria in 28/09/1975 . I worked in building site , pipeline , plant construction , break water construction ,jetty constuction ,

Consturction Safety

As a Land / Hydrographic Surveyor with 19 years experience covering a variety of harbour surveys, ocean, dredging, engineering, buildings, breakwater construction, jetty construction, roads and offshore construction surveys working with numerous projections and spheroids.

Establishment of Health, Safety and Environment Management function

I have two degrees, one in structure engineering and second in computer science. I have extensive experience in design and construction of civil structures. I have over three years experience in engineering analysis and design software development.

Seven year experience in HVAC design and maintenance

Demonstrated ability to build on a technical trade qualification applied in a teaching environment with strong skills in coaching, motivation and communication. I am now looking to combine my technical trade skills and strong inter-personal skills with opportunities in the resources sector.

Safety Director, Electrical Construction

Field and site experience, Ethylene Plant, Pipelines, Water treatments, Semiconductor tool upgrades, Refinery shut down, Jail, Clean rooms, Data center, Hospital, Schools, Substantial, Close-outs, MEP, Rotating and Static equipment, Process piping, Commissioing and startup, Schudling(P3)

BE (Electrical) from VJTI – Bombay with rich experience in Contracts & Procurement, MM logistics, EPC Project Management, Sales tender, Profit & Cost centre Operations in career spanning 25 years in India and Overseas for Oil and Gas Process, Petro Chemical, Metal, Power, Civil MEI Infrastructure BU

I have directed diverse construction sites, being in charge of but of 300 people, and controlling great projects of construction

I have 16 years work experience as Safety Director an Environmental Engineer maintaining compliance with all regulatory agencies , state and federal. I have 17 years experience in company management. I have various aspects of safety and public relations experience.

Experience in the Power, Water and Wastewater automation and process control. Designing and developing automation solutions for PLC/ SCADA systems. Project management of automation and Telemetry projects. Leading role in design, engineering, testing and commissioning

A senior in-house counsel and former legal practitioner with approximately 8 years experience in general litigation, banking, corporate and contractual matters. Considerate experiences in civil procedures of the Malaysian court and debt recovery process as well as the execution proceedings. Invalua

B.E., MECHANICAL ENGINEER

I am a four year complited degree civil engineer and i had worked in two prestigious Delhi metro rail project in India and since starting i am well experinced in Bridge const I am experinced in Well Pile foundation and all kind of sub and super structure activities i am exp in auto cad and MS off

HR specialist

Railway Management

First 1 2 3 4 5 6 7 8 9 10 11 12 13 [ 14 ] 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out