Resume - Safety Professional with over ten years experience in the EH&S field working on ...

Misco Jobs

Resume #6524

CONTACT INFORMATION:
View contact information...

OBJECTIVE
A/An Safety Coordinator/Supervisor position in construction with a company that will utilize previous experience and skills to meet business objectives and support commitments to customer service, employee development, and continuous improvement.

PROFESSIONAL EXPERIENCE
Safety Supervisor, Turner Industries, LTD / Harmony LLC. Sulphur, LA. (April 2003 to Present). Citgo Lake Charles Refinery COP/Tier II Project. Oversee and assist in implementing a successful safety program on the COP/Tier II new construction grass-root project which has achieved over 2.7 million safe work hours with no lost time or recordable injuries. Project scheduled for completion to gross 4 million man hours. Project manpower exceeds 1200 sub-contractor employees. Project involved major civil infrastructure work, structural steel erection of the crude and vaccum heater structure and associated piperacks. Heavy lifting and rigging setting crude, vaccum towers and flare stack involving critical lift planning, largest lift of crude tower exceeded 800 tons. Role as a lead safety representative on site directed the safety team of 7 safety professionals in performing investigations and documentation of all incidents, injuries, property damage, and near-miss incidents on project. Involved in all phases of project from grass root to start-up and commissioning of completed operation units. Also, analyze circumstances for "root causes" and failure analysis. Provide site specific training and orientation for new employees. Assist in the evaluation of injured employees and ensures that the appropriate medical attention is received. Ensure that the company health and safety programs complies with client, local and federal regulations. Coordinate with client and jobsite personnel to implement compliance programs for OSHA regulations, such as: benzene, respiratory protection, assured grounding, hearing conservation, fire protection safety and lock-out/tag-out, including monitoring, training and documentation.

Safety Supervisor, James-Timec International Inc. Baytown, TX. (February 2003 to March 2003). Mobile Exxon Baton Rouge, LA. PCLA #3 and HHLA Turnaround - Directed site safety over the exchanger bundle extraction and installation work, along with associated piping equipment. Conducted daily safety meetings with company personnel, clients, and subcontractors. Reviewed and documented JSA's and Toolbox safety meetings. Ensured that good safety performance was maintained throughout project.

Safety Coordinator, Turner Industries, LTD / International Maintenance Corporation, Sulphur, LA. (October 2001 to February 2003). Overseeing the safety program for special projects/turnarounds, outages throughout Texas, Louisiana, Arkansas, and Oklahoma. These projects included Citgo Refinery, Conoco/Phillips, Louisiana Pigments, Basel, Entergy Power Plant and Dupont. During this time for approximately 8 months was assigned as site safety manager for the Entergy Lake Charles Nelson Plant to assist in preparing the power plant to meet OSHA-VPP approval while going through the application process. Overseen the safety during all boiler revamps, outages and maintenance by sub-contractors at the Entergy Power Plant. Also Safety supervisor over the Dupont SRW Orange, Tx. plant for 3 month duration on the Ethylene Shutdown overseeing 6 safety technicians and ensuring the safety performance of approximately 500 construction employee's. All projects were completed with no lost time incidents/injuries.

Safety Supervisor, J.V. Piping Specialty Welding & Turnarounds Services, Inc. La Porte, Texas. (September 2001 to October 2001). Paulsboro, New Jersey - Valero Refinery, Crude Unit # 7 Turnaround- Directed site safety on the revamp of the vacuum towers and associated piping installation. Conducted daily safety meetings with company personnel, clients, and subcontractors. Wrote and issued work permits for safe work, hot work, and confine space entries. Reviewed and documented JSA's and Toolbox safety meetings. 20,000 + man-hours worked with no lost time incident/recordables.

Site Safety Manager, POWERHOUSE SERVICES, INC. Beaumont, TX. (January 1999 to September 2001). Specialty service contractor specializing in the fabrication, construction, revamp and maintenance of power plants, boilers, cogens and furnaces in the power utility and petrochemical industry. Manage all site safety activities including new hire orientation, employee safety training and pre-employment drug screening. Along with managing the safety department assist in human resource activities. Update and revised all company safety programs in accordance with OSHA and current regulatory revisions.

Saint Croix. Virgin Islands - Hovensa Refinery Bechtel International. Inc Delayed Coker Unit Project - Overseeing the construction of the Delayed Coker Heaters. Also working in a safety partnership with Hovensa, Bechtel, and OSHA for the duration of the project. Project completed with 98,000 man-hours worked with no lost time injuries or recordables.

Port Comfort, Texas - Formosa Plastics Extruder Expansion project- Worked 45,000 man-hours with no lost time injuries. Conducted routine safety inspections and PPE assessments for required job task in operating process units. Obtained and issued proper work permits for specific job task. Performed all job duties in compliance with OSHA regulations.

Sweeney, Texas -Phillips 66 SCLP Expansion Project - Worked 67,000 man-hours on the construction of the HRSG Cogen Boiler and Steam Turbine Generator with no recordables and no lost time incidents.

Port Arthur, Texas - Clark Refinery HOUP Project - Worked 55,000 man-hours with no recordables or lost time incidents.

Orange, Texas - DuPont SRW Ethylene Unit - Conducted routine compliance audits on contract construction personnel. Lead safety team on accident investigation and near misses. Work in relation with DuPont safety department to provide a safe and accident-free work place.

Beaumont, Texas - Mobil O&A BOE. USC-1 Furnace Expansion Project - Ensured regulatory compliance with OSHA construction standards CFR 1926. Conducted site specific job duties under the direction of Bechtel safety department. Worked 270,000 man-hours with no lost time injuries. Worked day to day with client to provide a safe and accident-free work environment.

Occupational and Environmental Health Manager, SAFETY MANAGEMENT TECHNOLOGIES, INC. (September 1998 to January 1999). Managed departmental services overseeing environmental, industrial hygiene and safety programs. Provided consultation and recommendations to company clients on EH&S matters pertaining to OSHA and EPA regulations. Directed and coordinated industrial hygiene surveys and negative exposure assessments for various clients in the petro-chemical and ship building industry. Trained in-house employees on current regulations and standards. Knowledge in RCRA, CERCLA, CAA and CWA. Extensive record keeping for data management and report development. Sales and marketing of company services for new business growth. Ensured that all company services provided were done within compliance of federal, state, and local laws.
Colby Rhodes, 2 of 2

Project Manager, CAM ENVIRONMENTAL SERVICES, INC. (January 1997 to September 1998). Involved in all phases of industrial hygiene monitoring for asbestos, lead, benzene, and other environmentally hazardous chemicals. Conducted noise, lead, and asbestos survey sampling Ground water monitoring and analysis. Involved in safety inspections and emergency response procedures. Also worked as safety compliance officer overseeing contractors on major refinery turnarounds to ensure that all work practices performed were done within compliance. Report development and data management. Performed job duties in compliance with EPA, OSHA, and all state regulations. Assist in marketing and sales of company services. Worked day to day with client to provide continued service-client relationship.

Field Coordinator, Environmental Analytics, Inc. Houston, Texas. (December 1995 to June 1996). Field coordinator for major tagging projects of process components and fugitive emission monitoring throughout various refineries and chemical plants. Extensive record keeping and data management for emission reports. Ensure quality assurance and quality control of projects. All job duties performed in compliance with state and federal regulations.

Industrial Hygiene Technician, Health and Safety Management, Inc. Beaumont, Texas. (April 1995 to December 1995). Responsible for providing a healthy and environmentally safe working atmosphere. Performing various types of monitoring for measurements and control of noise, asbestos, benzene, silica, lead, and other environmental hazardous chemicals and conditions. Also, performed respiratory fit testing and protection. Involved in safety inspections, audits, and emergency response in compliance with OSHA, EPA, and state regulatory requirements. Implemented and start-up of new company services involving air quality control and fugitive emission monitoring program. Extensively involved with calibration and maintenance of various industrial hygiene instruments and monitoring equipment.

Fugitive Emission Technician, ARI Environmental, Inc.Sulphur, LA. (July 1993 to April 1995). Onsite plant coordinating for fugitive emission monitoring of valves, flanges, process instruments and other components throughout various chemical refineries within the Golden Triangle area. Performing all job duties by EPA and state regulations to ensure that client meet all required compliance standards. Involved in all phases of fugitive emission; report development, management, monitoring and maintenance on all leaks found. Assure that all facility's air quality requirements are achieved and a good continued service-clients relationship.

EDUCATION
Associate of Applied Science, Environmental Technology, Lamar University, Orange, TX, 48 credit hours earned toward degree.

Certificate, Hazardous Waste Operation and Emergency Response for Supervisors, Lamar University, Orange, TX, December 1996

Certificate, Supervisor and practices of asbestos Abatement Projects, University of Texas Health Center at Tyler, June 1997

Certificate, 24-Hour Air Sampling Accreditation, University of Texas Health Center at Tyler, May 1998.

Certificate, Medic First Aid Certification January 17, 2001

(CHST) Construction Health and Safety Technician, Cert No: C696, CCHEST A JOINT VENTURE OF AMERICAN BOARD OF INDUSTRIAL HYGIENE, BOARD OF CERTIFIED SAFETY PROFESSIONALS

OSHA 10-hour Occupational Safety and Health Training Course in Construction Safety & Health, February 13, 2004

RELEVANT COURSES
Programs and Administrations in OSHA
Health Hazard Recognition
Safety and Health Standards
Special Topics in OSHA
Environmental Science
Waste Water Treatment
Safety and Emergency Response
Air Quality and Air Monitoring
Biology
Environmental Regulations

REFERENCES
Available upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2001 to 2050 of 4411)

Go to Search Parameters...

Brief Description

Construction verification, Cost estimation for mechanical systems involving process piping, heavy civil structures, Plumbing, and fire protection. Project management with Profit-Loss responsibility, Project cost control, Project execution, project control & close out.

I am Danish construction engineer. I have worked as a construction manager for about 3 years. The projects have been large infrastructure projects, commercial, and industrial projects. I have experience in site management and project management,

6+ years of software design and development experience with specialization in Client/Server programming, Object Oriented Analysis and Design. Proficient in, C/C++, MFC, Visual C++, Win32 API, COM/DCOM, multithreading.

I'm looking for a job as machinist. My field of interest is to repair, rebuilding, fabrication and/ or finishing of replacement parts for large and small mechanical equipment including pumps, valves, shafts , sleeves, bushings, rollers and other special items.

Curtain Wall Civil Structural Engineer Manager

11 years of experience in Erection & Installation, Engineering, Design, Commissioning, Inspection and other Management activities in the field of Terminal Automation, Gas Metering, Refinery, Gathering Centers and others.

Skilled IronWorker, general labor, maintenance and delivery

Construction Superintendent Electrical Instrument

Conversant in handling of sophisticated chemical engineering process design simulator, (HYSYS 2006;etc).

Willing to accept challenging career in telecom Development Equipment Environment with management and seeking for a position where I can utilize my technical skills and professional experience, to provide the best of mine for the success and growth of the organization and gain satisfaction thereof.

Planning Engineer, Certificate of degree Dr. of Philosophy

An independent and self-motivated professional, with over 10 year’s experience of administrative support.

Crawler Crane Operator

Mechanical Design Engineer: Design of Sanitaiton, Water Supply & Treatment, Fire Fighting, HVAC Systems, etc. Capable of Working both as a design engineer (consultancy companies) + Contractor office Engineer + Management & Proposal Writing

Experience- Over 10 years as Mechanical Engineer engaged in Oil & Gas Petrochemical Industries and Refineries, providing Engineering, Fabrication, Pre-commissioning and Commissioning Services.

Diesel Mechanic

High qualification in construction site management

industrial maintainence/electrician

Graduate Engineer with 1.5 years professional experience. Degree in Civil Engineering. Masters Degree in Water & Environmental Engineering.

Design urban infrastructure, industrial, power, airports Techno economic feasibility studies Project Management Bid evaluations, price analysis, preparation of technical specifications Design review Site Review Business Development, client interaction, presentation

2 years of engineering and drafting at vocational school, osha 10 lead card, hazmat training certified in asbestos removal

MSc (Mech Eng). Project Mngmt - waste, power, steel. Currently working in China (6 years), have previously worked in Netherlands, England, Canada, Germany. Currently Project Director, responsible for multi-million $ projects. languages fluent Dutch, English, German, good French, basic Chinese

material controler for production using and new project material handling.

Total 8 yrs experience in construction field (both mechanical & civil) including LNG storage Tanks, various areas of power plants & played a Key role in coordinating with Occupational Safety, Health & Environmental activities in a uniquely knowledge-based & innovative work environment.

I have been working as a cook for many years now and I possess over 25 years of experiences in the domain. Just to give you a brief idea, I worked as a cook for over ten years in a bush camp with over 40 people to my charge (for treeplanters, hunting and fishing resort and for a Mining Exploration

Qualified Fitter and Turner / metal machinist

I am working at different projects in the capacity of Protection/Coordination/Follow-up Engineer. The projects include the Design of schematics, Network parameters calculations, Fault Analysis etc.

Bachelor of Mechanical Engineering, Construction Manager, Sound Project Management Knowledge, Prima Vera, MS Project, MS Office.

Welding, Cutting and Fitting Structural Steel, GMAW,FCAW, SMAW ALL POSITIONS

I have an experience as a supervisor for the erection works of Heat Recovery Steam Generators and High Pressure Drums. As well, I have extensive experience in metal welding. Motivate, serious with open mind that’s how I am, I’m a bite new but I continue learning.

Control & Instrumentation Engineer with 17 years of experience in Projects, Manufacturing, Operations, Technical

I have ability to Design & Draft ARC. STRUCT. & M.E.P works

I can work as a Administrative Clerk, Logistic Co-Ordinator, Computer Operator, Secretary

Excavator operator

Experienced in plant O & M(power plant/LPG Terminal),execution of expansion/greenfield projects,material procurement,tendering/contracts management as well as statutory compliance

Proficient in the use of specialized engineering software includes AutoCAD2006, Tekla Structures (X-Steel), STAADPro2005, ETABS (CSI software) PCA Software (PCAbeam, PCAcolumn & PCAmat), and Profis (Hilti Anchor Bolt design software). Has basic knowledge in frameworks (PDS).

Enthusiastic And Self Determined Engineer Focused In Construction Management

Experienced Civil Engineer Technician. Proven professional. Highly efficient, confident communicator with both clients and on-site staff. A team player, not easily flustered, who enjoys the challenge of on-site problems.

A versatile Civil Engineering and Project Management Masters graduate with proven track record of management of complex engineering projects pursues a career in the Project Management field.

have experience in plumbing,welding,heating,airconditioning,boom trucks,forklifts,mechanic,coreing machine,construction and fabrication,and have experience on a bobcat around 40 hours

Electrical power sales engineer, building &construction projects, ATAP division-LVS, ABB Arab S.A.E.

Instrument Construction, Comissioning of DCS & ESD

Graduate electrical engineer with masters in energy management ; twenty-four years experience in EPC / diversified multidisciplinary project management, energy management, electricity regulatory functions

Civil Engineer With Project Management & Primavera, MS Project, Auto CAD & STAAD Skills

install engineer of refrigeration and air conditioning systems, also general plumbing

MBA, PMP Certified, PE(Texas), looking for a senior management position in a oil & gas company.

Design Engineer

Safety Professional with over ten years experience in the EH&S field working on major construction projects, turnarounds, expansions, revamps, startup and commissioning and maintenance in the oil/gas, petrochemical, and power plant industry. Hold professional certification as a CHST.

Afifi A/C Establishment Al-Khobar, Saudi Arabia as a Project Engineer.

SUMMARY · Bachelors Degree in Engineering Technology · 5 Years Commercial Project Management Experience · Previous to securing my degree I have 15 years experience in construction accounting and management.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 [ 41 ] 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out