Resume - To obtain a professional career in a challenging environment and be able to cont...

Misco Jobs

Resume #65451

CONTACT INFORMATION:
View contact information...

EDUCATIONAL ATTAINMENT:

College (vocational): Central Luzon Institute 1990-1992
Olongapo City, Zambales
Course: Basic Seaman

Secondary: St. Nicholas Academy 1986-1990
Castillejos, Zambales

Primary: Del Pilar Elementary School 1980-1986
Castillejos, Zambales

WORK EXPERIENCE:

Welder/Wheel Loader National Building Ind. Co. Feb'05-present
Operator Al-Ain, U.A.E.

(Calcium Silicate Bricks Factory – Hydraulic Curbstone Factory – Inter Lock Factory)

Operates straight or articulated rubber-tired tractor-type vehicle equipped with front-mounted hydraulically powered bucket or scoop to lift and transport bulk materials to and from storage or processing areas, to feed conveyors, hoppers, or chutes, and to load trucks or railcars: Starts engine, shifts gears, presses pedals, and turns steering wheel to operate loader. Moves levers to lower and tilt bucket and drives front-end loader forward to force bucket into bulk material. Moves levers to raise and tilt bucket when filled, drives vehicle to work site, and moves levers to dump material. Performs routine maintenance on loader, such as lubricating, fueling, and cleaning.

Selects the proper range, coarse setting, and filler wires for the appropriate metal and sizes being welded. Examines weld for bead size and other specifications, basic quality control, familiar with magnetic particle and dye penetrate testing methods. Lays out, positions and tracks welded work piece.

* Ability to operate power tools such as grinders, pneumatic busters, chipping hammers, and drills.
* Skill to use oxygen-acetylene cutting equipment. Assist in clean-up.
* Ability to operate shop machinery such as drill press, rolls, shears, burning tables, etc.
* Selects the proper range, coarse setting and filler wires for the appropriate metal and sizes being welded.
* Develops templates and other work aids to hold and align parts.
* Cuts work piece, using powered saws, hands shears, or chipping knife.
* Melts lead bar, wire, or scrap to add lead to joint or to extrude melted scrap into reusable form.
* Removes rough spots from work piece, using portable grinder, hand file, or scraper.
* Welds components in flat, vertical, or overhead positions.

Waiter/Assistant Cook Café Moka July'00-Sept '03 Abu Dhabi, U.A.E.

JOB SUMMARY

Under direct supervision; assist in the preparation and serving of food in a cafeteria; maintain food service facilities and equipment in a sanitary condition; and do related work as required.

QUALIFICATIONS

1. Experience in quantity food preparation and kitchen maintenance.
2. Sufficient education to assure the ability to read and write at the level required for successful
Job performance.

KNOWLEDGE AND ABILITIES

1. Knowledge of sanitation requirements in food preparation and storage.
2. Knowledge of methods of preparing, cooking and serving food.
3. Knowledge of the uses of kitchen utensils and equipment and the operation thereof.
4. Ability to work under direct supervision and cooperate with other staff personnel.
5. Ability to follow oral and written instructions.
6. Ability to assist in the preparation of various foods.
7. Ability to establish and maintain effective working relationships with others.

ESSENTIAL FUNCTIONS

1. Prepares vegetables, fruits, salads, and foods for cooking.
2. Prepares sandwiches, coffee and desserts.
3. Washes pots, pans, dishes and utensils.
4. Cleans work area and disposes of refuse.
5. Assists cook as directed.

Driver/Splicer Oasis System & Services Mar'98-Apr'99
Incorporated
Paranaque City, Phils

Responsibility to make sure the truck is properly inspected and ready for travel. Check fuel levels, oil and other applicable gauges and perform a series of inspections to ensure safety on the road. Adjust the mirrors to guarantee maximized visibility. Anything that is not correct on the vehicle is then reported to the dispatcher who then makes a report. Can spend long hours on the road and are responsible for maintaining integrity while on the thoroughfares. Alert and aware of all situations in order to prevent an accident.
* Strip, clean and terminate cable onto cable box terminal strips and/or blocks.
* Drop wire, house cable, construct am phenols and install/replace telephone equipment.
* Complete field assignments under minimal supervision.
* Take the initiative to learn new equipment, technologies, and troubleshooting procedures.
* Willing to work long hours and additional shifts to complete a job.
* Exercise independent judgment; take measures to ensure on-the-job safety.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1601 to 1650 of 4363)

Go to Search Parameters...

Brief Description

Looking for a bright career in the field of Supply chain Management.

Proficient in Document Management System & Secretarial Functions

Mechanical Engineer with 3 years of experience in electrical instalations

Summary of Qualifications. Eighteen years of documented success in the design, oilfield and construction industry. ·Experience on project and design working extensively with the Designers and Engineers.

Senior Electrical/Design/Project Engineer for HV and MV substations

Proficient in drafting submittals (2D & 3D) and/or shop drawings prior for construction up to As-built Drawing. Multi-disciplined: Architectural, Structural, Mechanical (including Plumbing & Piping, HVAC, and Fire Fighting), Electrical (including Lighting, Grounding, Telephone & Data, Fire Alarm, a

About eight years of solid experience in designing and implementation(execution) of structural works

Reviewing the scope of work & technical specifications, checking detail projects schedule plan for construction and delivery of equipment, analyzing the projects progress and monitor the site progress and look after the safety and quality issues and more.

A 34 year old project manager with 14 years experience in mechanical, industrial and commercial projects. 15 years experience in all realms of contract engineering & QA/QC. Overseeing projects up to 36 million dollars. Project estimations.

Experience in Construction of Power House, Highway Roads, High-rise Buildings, Canals, Air Ports, Aero Bridge ,Delhi Metro Rail, Commercial and Residential Multi Story Buildings ,Water Tank, Guest House , Domes. Familiar with ISO 9001,ISO 14001 and Safety systems.

30 year old dynamic electrical power systems engineer available for immediate relocation.

Worked as an Auto Diesel Mechanic over four years, which included supervises the troubleshooting and replacing of major components i.e., engines, transfers and transmissions. Operated vehicles weighing over 3 tons. Able to type 33 words per minute.

Recently I have completed a BSc. in Mechanical Engineering at the Near East University, graduating in 2008, Cyprus.

Rig electrician/ technician

Fresh Graduate. Civil Engineer. Interested in construction management and structural enginnering.

Proe, autocad.

Licensed Master Electrician, Licensed Electrical Contractor. 20 plus Industrial experience. Factory moving and inital setup experience seeking next project.

analyze and making risk assesstment. trained the workers for safety works and making safety reports.

An international, multi-lingual, technically proficient Sales & Marketing professional

Senior management consultant with 15+ years of progressive experience and with a results-driven approach for project and program management, including the use of first-rate skills in directing full cycles for high profile, multisite, international programs and initiatives.

I wish to apply for the post of Supervisor Warehouse /Material Specialist or (Buyer) Procurement.

To obtain a professional career in a challenging environment and be able to contribute my knowledge and be able to gain experience in a fast growing industry.

Reinforced Concrete, Steelwork, Structural Timber, 3D structural Modelling

Chemical Process Engineer,Simulation Design, Process Control Automation,Project Development-Conceptual,Feasibility,FEED,Project Mgr,Coordination_EPC,PMC,Licensor,investors;techno economic financial analysis,Mid Downstream Refining, Petrochemicals,Gas Processing/Treatment,Q-HSE,Business Head (P&L)

Microsoft project, scheduling, budgeting, estimating, superintendent background

Construction Manager - Worked as Architect, Interior Designer and Civil Engineer

Application for the Post of Structural Designer/Project Engineer for building structures in your esteemed Company or for any position applicable to my qualifications.

Senior Level Assignments in the realms of Procurement / Documentation with a reputed organisation

AutoCAD Operator

16 years in Planning/Scheduling/Project Controls for Power/Waste Water/Mining & Metals/Oil, Gas and Petrochemicals projects from concept to commissioning, particularly in multinational, multi cultural and consortium environment in India, Indonesia, Saudi Arabia, USA, Singapore, Bahrain and Canada

Having 11+ years professional experience in the EPC Contract for turnkey Projects handling Installation of Instrumentation and Industrial Process Control Systems in both green field and brown field area in India & Middle East, gaining experience ranges from Site Management & Administration

Specialized in the Hydrographic Survey, Topographic Survey, GPS / Total Station Survey, Dredging and Off Shore Construction Survey, GIS and CAD data integration, Data Processing and fair sheet production.

I am holding B. Sc in Quantity Surveying from University of Moratuwa, Sri Lanka. I have over eight years employment in the construction industry as a Quantity Surveyor. Employed by International Contractors

Have experience Road Design, MXROAD Software and AutoCAD Software. Total experience 7 Years 11 months in Road Department.

Monitoring and Scheduling the Projects

I have Diploma in industrial safety ASNT LAVEL II RT UT 3. QMS ISO 9001-2000 Internal Auditor Course BY TUV India Pvt Ltd and having a nine years experince in construction civil as well as mechnical five years with thired party inspection agency

Mechanical Subjects Lecturer & Senior Engineer in an Industrial & Commertial Projects

Power Plant Mechanical Engineer / Site Supervision of Mech. Work & Commissioning

Manufacturing Engineering Expert with 8 years of Experience in Tooling / Manufacturing Arena, Post Graduate in Mechanical Engineering & Management

Maintenance, Computer Hardware, Calibration,

Knowledge of design and analysis of steel and concrete structures. Special knowledge of finite element analysis(GTSTRUDL/SAP2000). Experience with all phases of building projects from drafting and design to execution and inspection.

Over 7 years of overall experience

B.E MECHANICAL(2007/76%/Skills in-AutoCAD,Pro-E,catia-V5,very good seminar & demonstrative

005- April 2008. Bachelor of Geomatic Engineering, :Industry training for 6 months in Jurukur Titiwangsa Temerloh Pahang .Learn more about Software’s (AutoCAD, CDS,MAPINFO and TRPS). Work as draught man after industry training for 3 months.

.E Electronics & Communication,

Having more than 8 years of extensive professional experience in project management, construction supervision of internationally aided highway projects including major and minor bridges, cross drainage structural works, assuring the quality of construction as per the approved drawing etc

creative thinking and good communication skills thats makes me successfull mechanical engg. always keen to apply these qualities to increase companies production and achiveing goal.

I AM IN SEARCH OF MECHANICAL ENGINEERING JOB IN PRODUCTION FIELD

Licensed civil engineer and one year contstruction experience

I am a licensed land surveyor in the Philippines. I was able to practise my profession for 2 years and 11 months. My experience enhanced the knowledge and skills i learned from my university. I worked well with people and enjoyed getting the work at hand completed.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 [ 33 ] 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out