Resume - I&C Specialist with 20 yrs experience, Navy Sub Vet, PLC/DCS and project managem...

Misco Jobs

Resume #65906

CONTACT INFORMATION:
View contact information...

Objective

To obtain a position as an instrumentation and control systems technician

Work Experience

Timec Inc. Vallejo Ca. Feb. 2007- Present
Instrumentation and CEMS Technician

1. Working at Conaco Phillips Refinery troubleshoot and maintain CEMS emissions analyzers, all refinery instrumentation including Rosemount
3051 smart transmitters, level, temperature,pressure and flow instruments. Perform calibration to ISA and NIST standards.Acting as an I&C
specialist train and mentor other technicians.Validate 3051 and modbus/fieldbus controls loops using Hart 375. While plant I&C supervisor is absent took his position and supervised seven other technicians.
Took and passed N.C.C.E.R. Level 5 I&E test during this period.

Caltrol Emerson Process Controls, Hawaii /El Segundo Ca. Oct. 2006-Feb. 2007
Field Service Specialist Reliability Analyst

Provide technical support in plant instrumentation for wastewater facilities, power plants and refineries in the Hawaiian Islands and at the Chevron El Segundo refinery. Provide design analysis and MOC's to address problem areas. Supervise contractors in design rework and installation. Troubleshoot, install and repair a wide variety of analytical instrumentation including VFD.s, emissions analyzers, lab equipment, and CEMS systems according to CFR 60/75 Provide startup assistance and loop calibration and certification. Calibrate various types of flow, temperature and pressure transmitters. Install and calibrate Limitorque MOV.s, and Fisher control valves. Provide design and technical support after hours for various refinery shipping terminals. Train personnel in valve maintenance and tuning. Provide support for Honolulu wastewater plant upgrade to Rosemount 3051 field bus transmitters. Calibrate and tune PID and various control loops to DCS and SCADA.Train other CEMS techs in gas analysis principle, CEMS troubleshooting procedures and analysis. Used Passport, Maximo, and MP3 work order systems.

Napa Sanitation District Napa Ca. Dec. 2003 - Dec 2006
I/C Maintenance Specialist

Maintain wastewater treatment plant instrumentation and electrical controls. Maintain pump station VFD.s, PLC.s, and remote telemetry RTU's. Calibrate plant analyzers including, PH, ORP, Turbidity and Conductivity Analyzers, CEMS/NOX/Oxygen and GCMS. Supervise and schedule maintenance contracts, provide direct oversight of contractors and plant operations staff on analyzer maintenance and calibrations. Submit monthly emissions compliance reports to the applicable state and federal agencies. Maintain Factory link SCADA and Rugid remote I/O telemetry that interface with pump station level, station controls or alarms. Maintain, and calibrate all flow, pressure and temperature transmitters to NIST standards. Maintain accurate calibration database. Perform yearly state mandated mag flow-meter calibrations. Maintain protocol 1 and 2 calibration gases to EPA and CFR 60/75 standards. Set up and program HMI interfaces, smart transmitters, and field bus devices using the Rosemount 375. Maintain digester Waukesha Cogen engine controls and emissions analyzer. Rebuild and calibrate Fisher control valves and Rotork MOV.s. Provide rotating 24/7 on call support.
Supervised plant staff in the correct methodology for calibrating and reporting for state and BAAQMD plant compliance analyzers Acted as I/E supervisor during primary supervisor's absence.

Foster Wheeler Corp. Martinez Ca. Oct. 2001. Nov. 2003
Senior Instrument Technician

Maintain GE Frame 5 Gas Turbines. Calibrate, troubleshoot or repair plant instrumentation and electrical control systems. This included all systems and sub-systems hydraulic, pneumatic, or electronic. Maintain CEMS Cirrus PAI emissions monitoring system. Perform monthly backup of DAHS and file. Prepare and submit compliance reports to state agencies. Troubleshoot, program and maintain a Bailey INFI 90 DCS and Modicon PLC controls. During turbine outages calibrate all field devices associated with turbine control, providing written calibration reports, documenting accuracy according to IAS, NIST and ISO 9002 standards. Supervise staff in correct monitoring of NO, NOX emission monitoring and data acquisition analyzers according to CFR 60/75 standards. Maintain plant LEL and explosives monitoring MSA analyzers. Supervise all plant control valve and actuator maintenance, order and maintain Fisher parts inventory. Maintain all plant safety equipment including portable gas detectors, fixed gas detectors and confined space entry equipment and rescue devices. Trained in confined space entry and rescue.

Central Contra Costa Sanitary Dist Martinez Ca. June 1996. Sept. 2001
Senior Instrument Technician

Maintain wastewater treatment plant electrical and instrumentation systems. This included plant CEMS analyzers, PH, Opacity, conductivity, turbidity and resistivity analyzers. Troubleshoot DI water and filtration plant. Troubleshoot 480 3 phase motors and controls including 200-600 HP VFD's. Design and implement new instrumentation control schemes. Implement plant wide PM schedules and provide improvements to promote greater reliability and equipment performance. Worked rotating on call for emergencies. Maintain Cleaver Brooks boilers and waste heat boiler controls. Rebuilt plant control valves. Maintained plant air and gas compressors.Maintained waste heat boilers, Solar gas turbine and cleaver brooks boilers.Maintained plant calibration standards to NIST and ISO standards. Maintained protocol calibration gas standards. Led continuous improvement teams plant wide, performed process evaluations. Provided agter hours on call support.

Education

Tullahoma High-Tullahoma, TN.
Graduate

U.S. Navy 1976-1982
Graduated Basic and Advanced Instrumentation Schools

Qualified USS Benjiman Franklin SSBN 640 and USS Dace SSN 607 Nuclear Powered Submarines
Attended numerous technical schools during crew off periods

California Water and Environmental Association
Attained I/E Technical Certification Level 2

Trained CEMS/DAHS CFR.s 60/75 Cirrus / PAI
Certified on Factory Link S.C.A.D.A.
Member confined space rescue team.
CPR and First Aid Certified
BATC Certified. Respirator certified.
SCBA certified and SCUBA certified
NCCER level 5 certification
Professional Memberships

California Waste Water and Environmental Association, Instrument
Society of America, ASHRAE. Submarine Veterans Society-USSVI
Hobbies Sailing, diving, camping, fishing and church

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2051 to 2100 of 4409)

Go to Search Parameters...

Brief Description

Have working knowledge of all aspects and stages of a construction project. Know what it takes to meet safety demands, schedules, productivity, and quality. Bechtel trained and certified in many fields, for example, certified rigging and crane instructor.

Post Graduate in Advanced Construction Management from NICMAR, Hyderabad. 1 year of work experience,8 weeks of managerial summer internship in a construction firm. I can work on Primavera P3e/c and Expiditation.

I am graduated civil Engineer, has worked in two countries (Nigeria and Pakistan) before. cv can be sent as attachment.

5 years of experience in the field of civil construction and Designing , Estimation of Under Ground Drainage system , Water supply distribution , feed mains, Storm water drain , Road and Drains. Presently working for M/s NCPE as project Engineer

14 MONTHS EXPERIENCE IN BELLELI SAUDI HEAVY INDUSTRIES, SAUDI ARABIA AS PRIMAVERA PLANNER. 5 YEARS EXPERIENCE IN RIYADH CABLES GROUP AS PLANNING ENGINEER

Breakdown Quantity for Project Construction, Mining and Project Control specialist.

X-STEEL OPERATOR, DETAILING, CIVIL DRAFTSMAN

Huamn Resource, Microsoft Works, Excel, and Word, Adobe Illustrator and Photoshop, Ouark Program and Act, Quickbooks, PeopleSoft, Tri Com, Bull Horn,Data Entry, 50wpm

Diesel technican/mechanic/ Technical Trainer in Iraq/ all heavy duty trucks, trailers vehicles, engines etc/Supervising experience, Excellent organising and admin skills, excellent people skills

GA class III wastewater license, 40HR HAZWOPER certified, excellent computer skills, Does have a valid US passport

Scaffold Inspection and Co-ordination

As an experienced civil/Building engineering (more than twenty years) I am willing to participate in your construction projects.

Licensed Journeyman Electrician

Electrical Engineer

7 yrs experience Generator Maintenance

in june 2006 i was specialized by safety marine service,when i worked in belleli energy spa u.a.e., as a rigger and sliger.this specialized included:shakels,lifting&towing slings,hooks,eye bolts,master links,damaged lifting gear&unsafe ropes,choosing the correct lifting equipment,practical training&

Teaching in College and Research work in Nuclear Electronics. Familier with Disital Oscilloscope, microprocessor 8085-86, antenna design( low frequency), DSP,and other elctronic circuit.

Telecom, RF, Wireless, LF, HF, VHF, UHF, BTS, Cell Site, Fiber Optics Engineer

I HAVE ALMOST 20 YEARS OF EXPERIENCE IN THE ELECTRICAL FIELD RANGING FROM DOMESTIC, HEAVY INDUSTRY, MINING AND OFFSHORE DRILLING INSTALATIONS.

Discovered 2 World Class & 2 Medium Size ore deposits - base and precious metals, gold, platinum, iron, open pit, under developed contries, Spanish, Portuguese, English, reg mining engineer & geologist USA & Brazil, Central & South America, Africa, Amazon, excellent Vice President, General Manager

17-year Multi-Skilled Construction Worker in the Construction Industry (4yrs. Manager;

B.E. in Civil Engineering under Bangalore University from Ramaiah Institute Of Technology scoring a percentage of 71.85.(1995-1999)

Degreed HSE Supervisor with 8+ years: refinery, buildings, sawmill, and manufacturing. Certified instructor.

Preparation of tender document, issuing tender, evaluation of tenders, submitting recommendation to tender committee for award of contract, preparation of contract document, administration of contract, corresponding with contractors on contractual matters, finalyzing variation PRPSL. from employer

Contract negotiations, contract drafting, contract analysis and legal risk management.

An Civil Engineer with 9 years of experience in the oil & gas, infra structure, marine structure, pipeline and construction industry. Able to work on own initiative and part of a team, to provide full support to the project with regard to all civil construction aspects, in addition to the engineerin

I am a 26 year old graduate who holds a Bachelors Degree in Computer Science from the National University of Science and Technology in Zimbabwe. I am very much interested in working in Botswana and South Africa.

Respected Sir/Madam, I have around two years of experience in construction from design phase to the project closeout with client interface.

Energetic young able body man to work for great company that wants to please their customers

I started my career as a structural engineer for more than 10 years. After some years on the field of Information Technology I want to go back to Civil Engineering. I prefer a position in Northern NJ or New York City, but I will consider relocation. I don’t mind some travel.

-Primavera Scheduler -SAP Experience -MS Office SME

I am a qualified and Certified RED SEAL ELECTRICIAN / E&I Lead Hand with a broad background within the Petro-Chem industry both on and offshore. Experienced in leading teams, self-motivated with excellent communication skills,

ZTE Pakistan (Pvt.) Limited: - Currently I am working as MSS Engineer in the O&M Team in the Telecard CDMA WLL Project .Installed & Commissioned ZTE ZXC-10 MSC, HLR..Operation & Maintenance of ZTE CDMA Network Elements like ZTE MSC, HLR and VLR.

7 Year experience in working as a laborer and carpenter for various construction companies.

B.Sc. in Civil Engineering (CE), Bangladesh University of Engineering & Technology (BUET), Merit scholarship recipient in every under graduate level (Second grade)

Quantity Surveyor (Civil OR Joinery), Site Supervising, Read Drawings, Design for Interiors, Computer knowledge.

Diesel Fitter, Welding, Electrical, Pnuematics, Hydraulics, Horizontal and Vertical Boring, Precision machining, Earth moving Equipment, Crushers, Power screens, Fenner boxes, Jaw crushers, Pneumatic, Plumbing.

I&C Specialist with 20 yrs experience, Navy Sub Vet, PLC/DCS and project management

I have over thirty years experience working in the oil, gas & petrochemical industries on the maintenance, construction & commissioning of various rotating & mechanical equipment. The positions I have held have been hands on and supervisory, in both the UK and overseas, working onshore and offshore.

Accounting packages known: Daceasy, Tally, ATG (KSA), Digitek (KSA)

I have wide experience (more than 22 Years) in Maintenance & Project field in Ammonia Refrigeration Plant, ice-cream, Dairy & Pharmaceutical Industries.

I am a QA/QC Civil Eng. with experience in the Kuwaiti Oil Sector.

Financial Controller or Accountant

Automobile Engineer with more than 12 years expertise in Maintenance of HEMM, with MBA and MS(Software) qualifications

Qualified and certified electrician, intensive troubleshooting skills

Heavy Equipment Operator

Experience: Contract Management: Lining up contacts, Qualification: M.Tech.

Near 13 years of professional work experience in the oil and gas industry, working experience on the on/off shore in Iran and extensive experience in oil and gas unit processing, reservoir engineering and well completion engineering.

Electrical Installations and Commissioning Engineer in Low/High Power Distributions

Experienced in Construction of Offshore/Onshore Oil &Gas plants in the field of Fabrication, Installation, Hydrotesting & Pre-commissioning of In-plant/Well Head Piping and cross Country Pipe Line. Qualification: Bachelor of Engineering (Mechanical)

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 [ 42 ] 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out