Resume - Experience in designing various types of transfomers including regular transfome...

Misco Jobs

Resume #66586

CONTACT INFORMATION:
View contact information...

Objective:To seek a position that is challenging and give allowance for accumulated experience as well as accumulated knowledge.
Experience:9/1969-12/2001, Westinghouse Electrical Corp./ABB Transformer Division, South Boston,VA.
Senior electrical design engineer:
* Primary function: To design various sizes of transformers ranging in KVA size from 50 KVA to 37.5 MVA.
* Voltage range:125 volts to 69,000 volts.

* Various types of transfomers:
* Pad mounted transfomers per ansi C57.12.22 and ansi C57.12.26 (where voltage and KVA would allow.)
* Pad mount range covered: 500 KVA to 15,000 KVA
* Voltage range: 480 volts to 52,000 volts (the above pad mount standards were applied where applicable).
* Under Ground Submersibles per C57.12.24.
* Network transfomers per ansi C57.12.40, both part ¡* A¡¨ and part ¡* B¡¨. Utilities that employed the part ¡* B¡¨ design were Public Service Electric and Gas of NEW JERSEY, and Consolidated Edison of NEW YORK.
* Substation type transformers per ansi C57.12.00 and ansi C57.12.10. These included transfomers with primary fuses, lightning arresters, and secondary breakers to render the transfomer self-protecting.
* Under the design umbrella included designing special units:
* Some of which are listed below:
* Station Auxiliary Transformers,Station Service Transformer,Phase Shifting Autotransformer,Motor Starting Autotransformer,Rectifier Type Transformers,Three Phase to Two Phase Design(Scott Connected),Grounding Transformers per IEEE 32.
* Dry Type Transformers
* Other functions included teaching and instructing people in the design of transformers and fuse application.
* Designed units for short circuit testing both for standard design and special customer requirements.
* This experience includes designing for utility customers, industrial type customers, OEM, Canadian customers, and international customers.
* Another function included lead design engineer.
* Technical Advisor
* Function: Marketing-Customer Application Engineer.

Education: 1961-1963, Prairie View A&M Univ., Prairie View, TX.
1967-1969, Prairie View A&M Univ., Prairie View,TX.
* BSEE, Electrical Engineering.
* Various in house courses in transfomer theory.
* Various in house courses in supervision.
* Military status: Veteran
* Interests: keeping abreast of changes in transfomer design.
* Miscellaneous:
Marital status: Married
* License Professional Engineer (PE)

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 51 to 100 of 4496)

Go to Search Parameters...

Brief Description

PROJECT PLANNING MANAGER

I am a person with tertiary degree in economy. For 18 years I have been involved in tunneling operations (drill & blast, auger drilling, hand excavation, pipe jacking and culvert jacking pipelaying including hands on experience. I did prepare SWMS and OH&S plans as well.

Dir of Construction / Project Manager / Owner's Rep.

vast experience of more than 30-Years in the field of Project Management, Execution, Supervision, Operation/ Maintenance & Construction, witnessing of commissioning test, making/ improving/ modification/ review of schemes of 380/220/132/11KV Grid System in Pakistan & Saudi Arabia

B.E. Civil with 37 years experience. SPECIALISATION : Water Resources Development, Irrigation, Dam, Canal, Dam safety, Flood Management, Quality Assurance, Geotechnical, Feasibility reports, Project reports for financial assistance, Researcher, Trainer, Experience with International Donor Agencies

CURRICULUM VITAE

Structural/Civil Designer 25 + years experience Do Sub Contracting from all over the world!

Strong and efficient HR Generalist/Strategist with an excellent seasoned background in HR.

Project Manager in Port Sector

Accomplished Art Director/Sign Designer/ Structural Sign Designer with over 18 years experience working closely with creative teams in the concept through production of commercial signs.

Safety Manager with strong safety skills. OSHA 500 certified.

Professional having over 25 years experience in EHV Substation & Transmission Projects Management

In my 26 years of working in the consultancy, construction and engineering field, I have gained enough experience to offer my services in the areas listed below. My experiences range from design, engineering to field operation and contract management and business management including business dvm't

Design, Design Review, Shop Drawings and Project Management

Mechanical engineer expert in product design and moulds expert Catia5

Power Project Management (EPC basis), Transmission & Distribution, Coordination, liaising, inspection, procurement of material/equipment through competiive bidding, vendor development and quality control

20 years working experience , including 7 years in oil & gas in construction, installation, testing and commissioning of power generation plants and distribution network in oil & gas fields, various commercial and industrial construction projects in Canada and Asia.

Professional Civil &Structure Engineer Of Taiwan

25 years experience in construction management of mining operations, highways, dams, site preparations, environmental, airports and petrol – chemical projects. Management assignments in 12 major projects.

Recently had the M.Sc. degree in electrical engineering from University of Technology

Innovative procurement department head with a high level of integrity and more than 20 years experiences at engineering & construction company.

Experiienced in estimating, forensically challenged change orders, cost analysis, bid analysis and project supervision. I have accreditation for osha 10, 30, and osha 500(certified to teach the osha 10 & 30 hour classes)

Project dreging engineer

I have 23 years of experience in my Engineering Career. 14 years of experience in Operation and Maintenance of 9.5 MW to 25 MW THERMAL POWER PLANTS and 9 years of experience in Erection and Commissioning of HIGH PRESSURE BOILERS. I am currently associated with M/s Enmas O&M Services Private Limited,

Experience in designing various types of transfomers including regular transfomers, specialty transfomers, phase shifting autotransformers as well as other types of transfomers.

Chief Finance Officer of Group having One Islamic Investment Bank in Dubai and Asset Mangement Company in Malaysai,

Seasoned Procurement and Materials Management professional with leadership qualities and multifaceted experience in excess of 29 years, seeks managerial position where knowledge, skills and experience are considered an asset.

Shipbuilding, Boats/Yacht construction and Shiprepair marine Industry

INSPECTION & EXPEDITOR, MECHANICAL ENGINEER

Senir Electrical Engineer-Installations and Maintenance

Over 20 years of extensive experience as an international consultant. Provider of structural software for the analysis and design of concrete & steel according to ACI, AISC & API codes of practice. Expert in; structural systems & forensic investigation. Professional in; STAAD III & MS office Suite.

Graduated in B.Eng civil 1976 and Post grad Hydraulic in 1982, total 28 years experience in civil, infra such as steel, timber, road, car park structures and sewer and pipe laying as well as tunnels and pipe jacking works.

End to End Project Management for the Construction of EHV Transmission Line

Transmission Engineer for Fiber Optics, Microwave & VSAT System w/ 20 yrs experience

Proficient in Microstation triforma 2d and 3d

More than 20 years management experience in power plant design, construction, operations and maintenance. My experience includes work in Canada, Australia, Taiwan and Indonesia and covers the full range of issues from strategic planning, project conception, finance and environmental compliance.

Structural/Geotechnical Engineering jobs such as Pile design, Retaining wall design and project management

Engineering and construction executive with MS in civil engineering and construction management and BS in general engineering, with extensive hands on and executive level experience in project, construction, and contract management in multi-deceiplinary projects in the international arena.

Having 11 years of UAE experience in international consulting , contracting companies in the field of civil, infrastructures, interested to advance my career to utilise my skills and strength

Over 30 years of experience in manufacturing/quality control operations with rich exposure to Product Development, SCM, Quality Assurance & Profit Centre Operations

I am a Professional Engineer with broad experience in construction; field Inspecting, Managing and supervising different types of projects ranging from infrastructure, Residential, Industrial, Institutional and Commercial. Administered contracts, evaluating contract proposals, material procurement,

Navigational Aids System Engineer

all-round civil engineering background with experience in traditional building constructions and special structures, such as bridges, tunnels, towers, piers and offshore structures including design, planning, project management, quality assurance and supervision.

Extensive experience and skills to help industrial organizations improve their effectiveness through better use of processes and systems. Also very proficient in development and use of integrated improvement teams.

My experience in the Middle East and Philippines has developed an expertise of Building Services

Knowledgeable and experienced Design Procedures with 15 years road construction experience

Over 18 years in the government service as Fire Safety/Fireman/Arson Investigator in the Philippines

Experienced in all phases of electrical engineering.

More than 20 years of exposure and experience in the construction, repair and maintenance of lighting and electrical power systems, and communication cables of buildings, yard lights, electrical motors, appliances, pumps, electrical equipment, transformers and gadgets;

I am a mechanical engineer holding a diploma specialised in ship construction and naval architect later converted to a safety personnel i have experience in high rise building, quay rivertment construction and with in airport building apron services construction works

First 1 [ 2 ] 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out