Resume - Experiienced in estimating, forensically challenged change orders, cost analysis...

Misco Jobs

Resume #67211

CONTACT INFORMATION:
View contact information...

QUALIFICATIONS

Self-motivated and focused professional with 20 years experience in the construction industry. Committed team player and problem solver with the ability to work with contractors, clients, and labor. Capable of written and verbal communication skills. Accustomed to living abroad such as: Malaysia, Indonesia, and Singapore.

PROFESSIONAL EXPERIENCE

Parson's Corporation USPS LSAP Program (ADA) 7/9/2007-Present
Senior Construction Engineer
Project Manager and Lead Estimator for 7 cluster's in South East Region of the United States; each cluster had between 15-25 job sites with contracts totaling 5 million dollars
Developed and redesigned conceptual estimating sheets and costs for the "Leased Spaced Accessibility Program" that are current with today's standards for remodels and new construction
Generated plans for new United States Postal Service construction and American Disabilities Act compliant work orders
Prepared: RFI's, invoicing, bid analysis, cost analysis, scheduling of projects, pre-bid and pre-construction meetings
Solved forensically challenged change orders

K & K Design Build, San Luis Obispo, Ca 1999-Present
Owner
Managed all aspects of business, including marketing, estimates, project planning, and installation.
Supervised crews and provided job planning for all projects.
Specialized in remodeling, small additions, repairs, and landscaping carpentry.

Warner Builders, Santa Rosa, Ca 1996-1999
Journeyman Carpenter/Lead Carpenter
Developed construction schedules on large-scale multi-disciplined projects.
Reviewed drawings to determine scope of project, design challenges, and to create an effective game plan.
Worked with other contractors to maximize crew efficiency and minimize job setbacks.

Stokes, Russell, and Hayden, Berkeley, Ca 1996-1986
Apprentice Carpenter/Journeyman Carpenter

*Continuously employed since age 8 and through college

EDUCATION
California Polytechnic State University
Bachelor of Science, Construction Management, Graduation, June 2007
Additional course work in Physics and Architectural Engineering.
Architectural engineering course completed: Static's, Mechanics of Structural Members, Structural Systems, Steel Structural Systems, and Soils
Physics completed: General Physics and University Physics for Scientists and Engineers.
Vice President for Sigma Lambda Chi, The International Honor Society for Leaders in Construction Management
OSHA 10 hour and 30 hour courses completed
OSHA 500 completed teacher certified course to instruct the OSHA 10 hour and 30 hour safety classes

COMPUTER SKILLS

AutoCAD Microsoft Word Microsoft Power PointMicrosoft Access Microsoft Excel Microsoft Front PagePrimavera WinEst

ACTIVITIES
Vice President for Sigma Lambda Chi; the International Honor Society for Construction Managers

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 101 to 150 of 4757)

Go to Search Parameters...

Brief Description

Master Plumber/ Master Pipe Fitter & Gas Fitter, Cert. 6G Welder

Engaged in major project execution of ROADS & HIGHWAY, AIRPORTS , COMMERCIAL PORT & POWER PLANT

Highly adaptable, mobile, positive, resilient, patient risk-taker and is open to new ideas. Productive worker with solid work ethic and exerts optimal effort in successfully completing tasks. Versatile all around worker which can handle multitasking

Experienced in Structural Steel Detailing. Highly proficient in AutoCAD, Capable to produce quality Erection plans and Shop Drawings.

I have over 20 years of specialised experience with varied role players such as Consultant, Contractor and client in the area of Project Control & Management. My experiences cover full range of services on the following categories • Business Process Engineering and Re-Engineering • Business Automat

Experienced CAD Technician with an excellent work ethic; loyal, and a team player.

Resourceful Project Superintendent and QA Supervisor with expertise in oil and gas industry project installations and industrial construction; focused on positively impacting cost control, resource maximization, timeline management, and team performance.

Over 25 years in the Construction Field

I've experienced for the boiler and energy sectors, in the commercial management and the site execution.

INSTRUMENT AND CONTROL ENGINEER, DCS SYSTEM AND CONVENTIONAL SYSTEMS EXPERIENCE.

I have over 18 years in experience in the construction,design and administration of large projects.

Diplam in civil engineer

+20 years work experience in fire alarm life safety, special hazards and low voltage industry. Bachelor of science in electrical engineering. NICET certified engineering technologist (Level 3 in fire alarm systems).

Construction management, and design of roads, infrastructure, utilities, pad sites, drainage and storm water management facilities.

Project Construction Management Professional have built High rise,Low rise,Industrial ,Infrastructrure and hospitality projects

Port Planning, Construction, project Management

An affiliate member of the Institution of Civil Engineering Surveyors. Experience of close liaison with the Client, Supervisor / Consultant Engineer, Contractor and Sub-contractor’s representative. Proficient in the management of keeping detailed records .

Responsible for maintaining mining equipment and responsible for performing safety Plant Operations, repairs and preventive maintenance and follow the procedures carefully reports to the supervisor any problem or trouble on his area of responsibility.

Facade Design, Curtain walling, cladding design

Civil/Structural engineer

Installation of electrical control,installation of electrical pannel board,installation of equipment overhead crane,trouble shooting,electrical control/machine,termenation of low/high voltage cable jointer

40 Years experience as a welder, 15 Years Sub-arc

Dedicated, creative individual with broad experience in project controls and project administration demonstrating interpersonal and organizational skills, with a proven ability to learn and adapt to change efficiently.

Engineering Technician/ Facility Manager

Knowledge in repair, rewinding, servicing and maintenance of electrical equipment such as AC/DC motor and generator ranging from fractional horsepower up to 8000 HP low and high voltage, wet and dry type transformer, coils and etc.

Fifteen years progressive experience in Construction Management and Engineering, Experienced in building and civil engineering works namely, roads, drainage, sewer and water networks, earth works and deep shaft construction, Full Member of the Charted Institute of Building UK (MCIOB)

Free! Welder

A hard-working and dependable Professional Quantity Surveyor with with the ability to work well both independently and in a team. My fifteen years experience in the construction industry has resulted in a well rounded confident and experienced Professional Quantity Surveyor.

Special Inspector CWI/ICC, Bolting, Fireproofing, B1 Inspector

Construction and Maintenance Mechanical Manager / Superintendent / Supervisor

Construction HSE proffessional residing in Canada. I am looking for over seas employment on a major Construction project. I am a board certified health and safety consultant and Safety officer as well as having over 15 yrs of construction expeirence as a journeyman tradesman.

I am a highly competent person, trained and experienced in all facets of construction, construction management and leadership.

25 years experience in construction management of mining operations, highways, dams, site preparations, environmental, airports and petrol – chemical projects. Management assignments in 12 major projects.

Experienced structural engineer (US and Australian experience)

Mechanical Enginner with more than 16 years of experience in the field of Construction, Maintenance of Petrochemical, Chemical and Power plant

Acquire 17 years of experience as Mechanical Construction Field Engineer in Oil & Gas (Upstream & Downstream), Chemical, Petrochemical & Pharmaceutical projects. Experienced in Planning, Organizing & field monitoring activities related to Piping and Equipment (Rotary & Static) installation.

Career minded Hands on Professional with over 30 year’s industry experience which includes Project Management, Health Safety and Environmental Management along with Anti Terrorism Security Design within various Industries and Governmental Organisations.

Recently had the M.Sc. degree in electrical engineering from University of Technology

Experiienced in estimating, forensically challenged change orders, cost analysis, bid analysis and project supervision. I have accreditation for osha 10, 30, and osha 500(certified to teach the osha 10 & 30 hour classes)

Construction project manager

Ase Master Mechanic 22 years

Result-oriented leader with more than 20 years experience, intuitive manager with a strong technical attitude, self-confidence and change catalyst, specialist with experience in TQM, process improvements and process mapping.

B.SC. ENGINEERING, PROACTIVE TECHNIQUE,ISO9001:2000 & HSE

17 years in procurement, project management, planning

electrical/mechanical superintendent/ project manager

Civil Engineer with 17 years experience

Chief Finance Officer of Group having One Islamic Investment Bank in Dubai and Asset Mangement Company in Malaysai,

Expert in managing conglomerates and applying strategic planning and control instruments

Civil Engineer. Formwork Specialist. Experience: 14 years. Mounting, Scaffolding, Precast Concrete.

Fujitsu LV-III Installer, OSP Field Engineer, Structure Cable Lead Installer, Fiber and Copper Splicer, Network Tech, Antenna Tech

First 1 2 [ 3 ] 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out