Resume - Certified journeyman plumber/pipefitter with overseas experience willing to trav...

Misco Jobs

Resume #67586

CONTACT INFORMATION:
View contact information...

OBJECTIVE: To obtain employment, within the plumbing and pipe fitting industry with a reputable contractor

QUALIFICATIONS
Licensed journeyman plumber/pipe fitter, nine years in the piping trade, worked in numerous capacities including foreman, lead man, and as a worker, experienced in all aspects of plumbing and pipe fitting installation, exceptional worker, work well with others, will go the extra mile to make sure job is correct on initial install

EDUCATION
1998-2002 Plumber/Pipe fitter, UA certified
1994-1995 General studies, Tennessee State University
1994 General studies, Volunteer State Community College
1989 United States Marine Corps Electronics School
1987-1989 High school diploma, Antioch High School

EMPLOYMENT
2006-2007 Plumber, United Association
Worked as Journeyman Plumber and Lead Plumber on several projects within Las Vegas and
Tennessee, domestic water systems, drain,waste and vent systems.

2006 Liaison Coordinator, Al Sámi Group
Responsible for making sure employees were taken to their destination throughout Iraq

2005-2006 Plumber, Readiness Management Services
Worked on installation of sewer and water lines throughout the base, repaired and replaced existing lines as needed, also worked in maintenance in the repairing of buildings

2005 Plumber, Kellog Brown and Root
Worked on all aspects of plumbing; installed numerous septic tanks, water tanks, sewage mains, water mains, lift stations, and water pumps; was able to install each of these systems during employment in Iraq while helping to create man camps and other portable housing units and buildings that were existing as well; gained great knowledge of what type of system works in this type of environment

2004 Plumber/pipe fitter, NPS Energy Services Inc.
Worked on TVA outage on all coal piping, was also available to work on plumbing during outage, rebuilt several parts on eight different coal burning units

2004 Plumber, Tri-State Plumbing Inc.
Worked at the Fed-Ex forum in Memphis TN, was responsible for the installation of all domestic water and waste piping throughout the Fed-Ex forum, helped install rain water piping

2003-2004 Plumber, Gipson Mechanical Contractors Inc.
Worked on the construction of a radiology laboratory-installed domestic water, waste piping, and medical gas piping at the Hendersonville TN Hospital

EMPLOYMENT continued
2002-2003 Plumber, FM Sylvan Inc.
Worked on all plumbing and medical gas piping for the Vanderbilt Children's Hospital in Nashville, TN, was able to excel in different capacities while employed at the children's hospital, after several months on the job was made a Duarte foreman, in which I was made readily available for a crew, responsible for the layout and supervision of these men.

1999-2001 Plumber, A-H Mechanical Contractors Inc.
Worked on numerous projects for this contractor, worked on a service truck making repairs on commercial buildings as well as family dwellings

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1151 to 1200 of 4371)

Go to Search Parameters...

Brief Description

Transmission line / Substation Construction supervision

I can easily get along with my co-employees and having a good interpersonal skills like communicating to other people. I can drive. I can surf the internet / ms-office.

Presently working as an Electrical Engineer Professional

Bsc (Hons) Civil Engineering. Incorporated Engineer and Member of the Institution of Civil Engineers.

20 yrs exp residential contractor

Interest in Architectural/Construction Design and Engineering Document Control - Background experience in Aluminium Company and Electronics Production and Engineering - With excellent knowledge in Excel, Word, Powerpoint. Basic knowledge in Autocad

Professional-2 yrs experience

Graduated from ESITC Metz, a leading french civil engineering school

I Hold a BSc in Quantity Surveying and am working towards a Masters Degree in Project Management. In terms of skills, i do Assisting projects manager in overseeing the whole construction process from site acquisition, contract documentation, tendering, adjudication, award, supervision, commission a

I am a CNC Operator and I can work through master cam or manual programming

T&I, Commissioning, scheme verification and Maintenance of Switchgear and Protection system in Refineries, Power Plant, NGL plants, Gas and Oil Exploration/producing/Separating Facilities, Oil and Gas well areas.

M.E. Civil in Transportation Engineer with I-Class

Master of Engineering degree (Civil), Canada, Interim member of P.eng and OSPE, member of ITE(USA).I also completed real estate examination from Onatrio Real Estate Association. Extensive experience working with wide range of local & international consultants, contractors,municipal &, semi

Passed out Diploma in Instrument Engineering through NATIONAL POLYTECHNIC from July’ 1993 to May’ 1995

Heavy equipment operator over 20+, Body Work and Custom Paint 20+ and Welder 10+

Sales, Client Development, Recruiting, Human Resources, Customer Service

Implementation Manager or Technical Project manager

Interprets plans, conducting quality control as inspector, preparing welding procedures as a welding engineer, and controlling/monitoring project activities/ preparing documents for the fabrication of boiler components shall hopefully contribute to your requirements.

I am Design Engineer. My most recent experience was design an automatic steel strip coil tensioning and recoiling line . I was responsible for the overall product design, workshop drawings and hydraulic and pneumatic circuits. I developed the first draft of the operator's guide.

for a vacancy in your organization for Quantity Surveyor / Civil Engineer.

Five years experience as a Journeyman Boilermaker, working as a welder, rigger and mechanic. I also have 18 yrs. experience in glass manufacturing where I started as a maintenance mechanic and worked my way up to batch and furnace Dept. manager.

With more than 12 years in Petrochemical and Paper industry and in various positions and discipline.

I have been in electrical construction for 12 years, 3 years in management of electrical construction. I am interested in working overseas for short or long term projects. Please call with any interest.

12 YEARS EXPERINCE IN CIVIL/STRUCTURAL ENGINNERING EXPERIENCED IN USING BS AND US STANDARDS. POWER PLANTS, OIL AND GAS, DE-SALINATION PLANTS, SUB-STATIONS, SVC PLANTS, TANK FARMS, AND VARIOUS OTHER INDUSTRIAL STRUCTURES.

Hard working person can easily adopt the environment and fast learner can also learn different fields of work and I am also willing to learn more for me to grow more as an individual

GIS,Automated Mapping and Drafting; Mastering GIS principles and techniques

As a Laboratory Technician I have learned and trusted to operate the On-Site Analyzer machine, a first of its kind in my previous company. I also had an experience as a Vehicle Inspector Technician of both Heavy Equipment and Light Vehicle. From this, I become accustomed to maintain equipment and v

CAD Software : SolidWorks, AutoCAD, Pro-E, WildFire, Ansys, SolidEdge, Revit,TurboCAD

Certified journeyman plumber/pipefitter with overseas experience willing to travel

ELectrical Design Engineer

I have experience in handling personnel working on distribution lines. I can easily adopt to work environment related to Electrical Engineering.

Department of Translation, Qualification of Interpreter –Translator; IT Application Specialist

Telecommunication & IT Engineer

Professional Electrical Draughtsman with excellent Gulf experience in several Electrical Projects in various positions.

HND Architecture, PGD Architecture, MBA

Chartered Safety and Health Practitioner (CMIOSH) working lately as High Risk HSE Consultant in the Oil and Gas Industry

Welder-Fitter, CWB Supervisor, Millwright, CPR, First Aid,

IT Manager

marine chief engineer with 12 years experiance at sea, one year experiance as new ship building supervisor.

sr;mechanical engineer /project engineer/construction engineer/manager/engineer

Program/Project Manager

Civil and structural design engineer (3 years experience ) with knowledge of STAAD Pro, ETABS, STAAD foundation and internation standards, codes such as ACI, AISC, ASCE and BS

Qualified Boilermaker/ Welder, with over 25 years experience, mostly on mines and construction.

Technical Office Engineer

SAP Plant Maintenance, Supply Chain Management, Canada

Over 15 Years of Management in Operations, Manufacturing, Installations, Utility / Facility Maintenance, Repairs, Distribution, Capital Equipment Purchasing, Equipment Maintenance, Transportation Maintenance, Minor/Major Construction and Fixed Firm Price/ Contracts

Field Construction Engineer

I would like to further my career in maintenance and would enjoy the opportunity and challenges that this opportunity would offer. I believe I have the skills and knowledge that would be an asset to any operations.

OBJECTIVE Senior site agent/ project manager within the commercial construction or civil industry. Remuneration negotiable (from € 50000 p.a. plus benefits), depending on position and region where contract is offered. Would consider any international placement.

A 3year Diploma Civil Engineering with more than Ten+ years experience which includes Four Years Gulf (2 year's U.A.E) Experience in High Rise Building Shop Drawings and Site Inspection, buildings likes tower's and oil field surveying/inspection and make co ordinate drawing and as built drawing's.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 [ 24 ] 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out