Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #68267 next resume »»
CONTACT INFORMATION:
View contact information...

2005 – till present running my own business (Restoration of stained-glass and supply support and advice for Oil & Gas projects
Working on projects for various E&P Companies and Contractors,
Total E&P Yemen as Construction Superintendent
At the North Sea and onshore as an (Ops./Instr./Elec./Inspect/Mech-Engineer/OIM/Client-Rep/RPS)representing Total for execution and advice on Projects, Simops operations Safety, Hook-ups and Commissioning of new platforms (Focus Oil&Gas), Transition from Carrier to Pipe layer "Audacia" (Allseas), Drilling, Production, Well-Testing (Total), Risk-Assessment and Work-Overs(Total). Radiation safety Rep. for Vermilion Oil&Gas (Six-year survey). For Total E&P Angola on Drill-ships (Pride-Africa&Angola) and on the Semi-Submersible (M.G.HULME) at the" Dahlia-Project" and at Site in Soyo Angola for Methods Technical-Safety Department for benchmarking, and also performed Rig inspection on two Land-Rig (KB700/IDECO350).
2002 – 2005
For Fabricom Oil &Gas (Super-Intendent) with-in Total E & P Netherlands acting as an OIM, Production/Company-Rep./RPS/PIC to Manage/Supervise/Control/Review/Advice/Plan in Liaison with all Disciplines and Parties on a daily base.
On Simultaneous Operations (SIMOPS) Maintenance, Emergency-Control, Safety, Drilling, LSA Control & Awareness, Site-Survey's for Production, Projects, Work-Over's (Slick/E-line/Coil-Tubing/Rig and Rig less), performed Major Plant and Process modifications, also writing and executing Work & NORM programs including JRA's on Tie-Ins, Pipelines(ridged and conflex) repairs, Commissioned/Witnessed for DNV and or Client: on Structural, Piping, Control System's(PSC/DCS/PSS/(HIPS "First approval on electronic system")/F&G),
(Pressure/Leak/Load/Acceptance/Function-Testing), and had the opportunity to perform an (Bracing Repair by Cofferdam method) Rig less, and also acted as a Mentor providing support and knowledge to Total E&P contracted Satellite-Intervention & Maintenance-Teams.(Disciplines E/I/M/Op/Cr).
1993 – 2002
For M.O.S./Maintec-Project-Services acting as a Lead Process-Engineer on ENI's/Lasmo's Gasproductionplatform Markham J6-A. Responsible for the daily J6-A gas and condensate production, including the three satellite platforms and Sub Sea wells. Acting as OIM/Production-Rep. on Simultaneous Operations, Drilling, Production, Projects, and Work-Overs. Strongly involved in daily safety, maintenance, planning, PTW system, Work-programs, Lifting Plans, (re)engineering (at site) E/I/O/M, and participated in Adverse Weather Policies(Dutch/UK legislations), also represent Lasmo at the first "Tripod" (safety benchmarking North-Sea) NOGEPA wise, and was involved in creating the Ops manual, Safety Case, environmental plan and in the certifying process qualifying for ISO 9001 & ISO 14000 and in gaining for a Operating-license for the Norwegian Government.
1991 – 1993
For A Hak Offshore as Material Coordinator responsible and accountable for buying/rentals/certificates logistics/custom's clearing and coordination of all material's and equipment for On- & Offshore projects, keeping the registers update for (Platforms, Satellites, Compressor Stations, Receiving facilities, Mix stations, and as Mechanical-Electrical Engineer on several On & Offshore locations perform trouble shooting on Temporary power and air-supply, cranes, welding and preheat treating equipment)
1988 – 1991
For A Hak Offshore on several platforms performing Plant-modifications, Six-year surveys, Hook-up major structural modifications as a Mechanic, Materials Coordinator and as an Electrical/Mechanical Engineer responsible for the power-generation of the Gas treating centres.
1986 – 1988
For A Hak Pipeline as a Mechanic/Electrical engineer responsible pilot-valve, leak, and pressure testing and Debottlenecking/Dewatering of the incoming pipelines and receiving-facilities for the Gasunie and responsible for the maintenance of the rotating equipment at the Gas De-sulphuring-Plant (NAM) in Emmen, and for checking the equipment of the Contractors.

Summary per discipline:

E & I. DCS and Fire and Gas systems like ABB, Modicon, Triconex, Foxboro, Delta-V, Invensys, various PLC's with all the ins & outs, Commissioning and Flawless Start-ups, MCC Modifications, Revamping, Implementing Crew finder & PLB system, Transition from Pneumatic to Electronic, fault searching in complex systems, as well as repairing and maintaining UPS, welding machines manipulators, machining & production tools portal cranes civil installations. Supervise and Tutor newbie's
.
Mechanically Maintain repair and revamping of various Diesel/Gas/Petrol Engines Brands:(RR/Cat/VBV/Scania
/Daf/Mercedes/Deutz/Hatz/Lombardini/Jamaha/Johnson/Mercruiser/GM/VolvoPenta/AmstrongSiddenly/Perkins/Cummings/Ford Mermaid) and. Hydraulic and Wire Crane's and Diggers, Side-booms, Air-Compressors/Dryers, Shovels, Generators, Dozers, Snow-Cats D3 to D6, Pipe-Benders, Geho-pumps, Welding-Diesels In and Outside Pipe-Clamps, Jacks and Winches, High and Low pressure pumps up to 3500 bar, All types of Valves from 1/2 to 36 inch, Submersible Pumps, Gas-Compressors (Nuovo Pignone, Siemens), Power generation, Turbines (Angstrom, Kongsberg, Dresser, General Electric), Pump's al type's, N2-Skits, Instrument/Work-air systems, Hypo-chlorite and Reverse Osmoses Skits, building Hydro/Vibration/Power/-Packs, Hydro, Helium. Leak and Pressure Testing of Installations and pipelines, rigging plans, as well as Supervising and of Contractors.

Operationally Supervising Hook-up's, work-over by means of slick/wire line and Coil-tubing, executing Well-testing and Well-Completions programs and trouble-shooting on well problems and prod. tubing, casing, packer, Gauges flow conditioners or DHSV exchange, performed major modifications on Gas-production-platforms like (Compression, Meoh recovery, WHRU, LQ extensions), connecting and repairs of Pipelines (Ridged & Flexible) and Dune crossings, Treating Centre's, Offshore as well Onshore, Commissioning systems as Compression, Meoh-Recovery and Training, implementing divers new facility's, writing and executing Flawless Start-Up programs, also was I involved in Hydrate-Prevention Plans, Hazop Study's, Adverse Weather Policies, Implementing PLB system, Strongly involved in Risk Inventory and assessment, writing laboratory programs and training, ISO 9001, ISO 14000, Waste Management, implementing Gas-Contracts, LSA Work-Program's, Shutdown-Program's, writing Job-Instruction as well as Job Task Risk Assessments for all disciplines. Reporting/Planning by means of divers computer programs like, Amos-D&(W), Elise, PI, Primavera, MS project, Sap, cc-mail, Lotus notes, Word, Access, Excel, Lotus 123, Monte-Carlo and various Corporate Management Systems.

Summery Projects Laying Pipelines on Land, River/Canal/Road and Coastal/Dune crossings. (In various grades steel/plastics for Water, Gas, Oil, and Chemicals, in various size up to 56 Inch). Installing Freefall Life-boat frames, process utilities and upgrade's like water-separators and structural extensions on Nam, Amoco and Total platforms, Hook-ups/Revamping and Flow/Pipe-line connections(Placid Oil). Flawless Start-ups and (De) Commissioning of Platforms and pipeline's (P15 Amoco). Drilling or Work-over on Wells on (total)K5ENC HZ 8km /K4BE HZ 7km /K5B prod-tubing exchange /J6A(Lasmo/ENI) 5 wells/ST-1 5 wells/Windermere 2 wells/K4ad sub-sea(Total) K1A 4 wells (Rig stuck with leg in soil for 6 month)/L7H sand lift..

Course / Training Attended during the last 10 years:

Dangerous Goods Management (IATA, IMO),
Vibration-monitoring & Analyses (Bentley-Nevada),
Maintenance Gas-Turbines GE-LM1600 (Thomassen/General-Electric/CCC/Woodward Motor-Management),
Compressor Course (Thomassen-GE),
Crane-driver Offshore Stage-3 (OPITO),
Gas-Measurement (OPITO),
NEN-1010(VEV)/3140/Nen-3410/50110-1/60079-17(Explosion-Safety)
Self-Assessment Course (Schouten & Nelissen)
OIM RSE emergency Control Certificate (STC)
IAEA/EPA Member regarding Decomm.
Prof-member AAAS and Member of the American Society of Chemical Engineers
And studying for the NEBOSH National Diploma.(Grad IOSH MIIRSM)
Delta-V and Invensys Foxboro DCS-systems.
VVA1 (PBNA/DNV) and VOL-VCA (Safety),
Fire Controller/Emergency Management (Brand-Consult)
Fire & Rescue Team-Leader/Member (MTC)
Radiation-Hygiene/Control (ECN)
Coxswain/Member Freefall& Common Lifeboats (MTC)
Helicopter Underwater Disorientation & Escape training (RUTH)
Survival at Sea (DHTC)
Helicopter Landing Officer,(KLM)
Marcom-B
Man-Overboard/FRC Team-Leader/Member(DOTC&MTC)
FRC/MOB- Crew-Finder/Member

Academic Qualifications (copies attached to CV's):
Diploma Level-5b Radiation Open Sources (TU-Delft)

View contact information...
«« previous resume next resume »»
Search Results (Resumes 3651 to 3700 of 4798)Go to Search Parameters...
Brief Description
Purchasing/Logistics/Supply Chain Expert for more than 12 years of solid experience
1991-2002 : Diploma in Building Services Engineering Place : Shah Alam Polytechnic CGPA : 2.85 out of 4.00 1997-1998 : SPM Place : Sekolah Menengah Teknik, Kuala Terengganu Grade : Grade 2, 31 Aggregate
Customer service, clerical, dental, medical
Hull / fields/site engr. structural detailer have an experience in shipyard industries.
Strategic Planning • Program Management • Budget Analysis • Client/Employee Relations • Estimating
After having the highest level of exposure in Project Planning for the past Eight years in one of the fastest growing companies in Dubai. I am looking for a challenging and creative position that will set new standards in Project Planning. And to obtain a challenging position.
Over 20 years of diversified management experience with an extensive background in the management, selection and maintenance of vehicle fleets, over the road and off road construction machinery.
BE in Electrical and Electronic Engineer. Training in PSS/E Software. Able to perform Load flow analysis using PSS/E software and intepreat result.
Having 4 year exp. in automotive sector.
Communicator, negotiator, manager, natural leader
20+ years in culinary field,client pleaser,professional with a sense of humor
IT PROJECT MANAGEMENT
Well versed with ISO-9001:2000, ISO/TS-16949:2002 QMS, MS-OFFICE
Total 11 years of experience for Instrumentation and control related design and detail engineering activities for Petrochemical refineries, Ammonia Fertilizers, Cross country Pipelines, Offshore and onshore gas processing facilities and power projects.
Information and Communication Technology Support and management - LAN/WAN Management, Email systems management,server administrations , systems administration, Database Backups,Network Security etc
Set-up, operate & maintain Document Control Area required for distribution, storage, retrieval & management of Vendor documents & dwgs, Proj. documents/drwgs; Electronic Document Management Systems Design, Operation & Maintenance; Supervision of Doc. Control Group & Precedures devt./implementation.
Graduate + Diploma in Materials Management, 12 Years exp., working as Purchaser in a Global Leading EPC Company in Qatar
Safety/Env (HSE) post sought (Will also accept Quality related positions) Reliable/Flexible/Language proficient - Willing to work worldwide, available from June 2009
After completing my Degree in Mechanical Engineering, I have worked in Diagnostician company providing NDT services on pipelines across Russia. Later I joined GAZPROM’s Subsidiary “Stroytransgaz” in Syria where 36”x319km Gas Pipeline Construction Project gave me a solid background in many QC aspects
GIS Expert (Esri & Geomedia)
Recent graduate with a Bachelors Degree in Mechanical Engineering looking for entry level position
I have a bacheors in engineering sciences, this is a relatively new discipline , which is essentially electronic engineering with a specialization in solid state physics and instrumentation
To obtain a full time job position in Mechanical Engineering ( Product Design engineering, Sales eng, HVAC, Analyst eng and Consulting)
Registered Architect (License No. 19900) since February 2005 issued by Professional Regulation Commission (PRC) of the Republic of the Philippines. Proficient in AutoCAD Program & MicroStation software. Familiar in using Autoplant 3D Structural, Microstation Geopak & 3D Studio Max.
Ingénieur en CVAC/ Mécanique du bâtiment et énergie
Control & Instrumentation Engineer with 5 years experience in erection, commissioning and maintenance of control systems and field instruments.
Logistics Manager, Rig Manager, Materials Manager
Bachelors - B.A., Applied Mechanical Engineering
A position with a construction company which requires skills in field engineering, cost controlling, planning, scheduling, and estimating
willing to work in a challenging Electrical carrier
Working on projects for various E&P Companies and Contractors
Project Controls, Cost Engineering, Procurement
A Credit Analyst and an Administrative Officer for more than 2 years, experienced in Accounts Receivable Management and other Administrative works.
To assist the Board in complying with current health and safety legislation and/ or regulations with the objective of ensuring that all reasonable & proper measures are taken to protect the safety and specific training programs;
Safety Manager/Auditor with Fire/Security and Enviromental experiance
Qualifications- NEBOSH Certification, OSHA-510 Certification and OSHA-500 Trainer Certification. Skills- HSE Mgt System, QA/QC Mgt System, Contractor HSE Mgt, Project Mgt, Personnel HSE Training, Regulatory Compliance Mgt, Resource Management, Sustainable Development & Conflict Resolution.
Chemical Engineer working on Process & Projects Engineering with 5 years of experience
Totally, more than 18 .6 years of experience in Diversified Fields, of which 15 years in Retail Trade in a Service-Related industry & 3.6 years in Wholesale Trade.
VBA Programmer for Microsoft Access and Excel
Mechanical Engineering Technologist
I am proficient in Timberline, Gradebeam, Suretrak, Primavera, Prolog, Viewpoint, Microsoft Office, Word, Excel, Works, Quattro Pro, Outlook, OneNote, and PowerPoint. I have also completed my 30 hour OSHA course and LEED AP certification.
Provide Project Control Scheduling Support
Project Recruitment Specialist
Over 14 years of professional experience of Design, Draughting and Checking of Plant layout and Piping System.Conceptual & detail engineering like Preparation of Plot Plan, Equipment Layout, Piping Layout, Piping Isometrics, Nozzle Orientation & Bill Of Materials preparation.
LANGUAGES Basics of C & C++, OPERATING SYSTEMS MS-Office, Windows 2000, XP. APPLICATIONS MS-OFFICE
Electrical instrument enginer, Prject engineer, maintenance, Loop checking, testing, operation, elctromechanical, F&G, ELV, MV ...etc
As an Electrical Engineer with some Experiences and Qualifications, include Instrumentation, PLCs, Control and Automation, High Technology Machineries and Equipmens Applications Skill, Engineering & Project Management, Computer Applications, Communications, and Leadership Skill.
Pressure Vessels; Package Equipment; Static Equipment; Compress, PV Elite, Auto cad Software
Solid Waste Management, Health, Safety and Environmental Management, Fumigation, Site Inspection, First Aid Service etc.
SALES , MARKETING AND PROPOSALS ENGINEER.
First   Prev   51   52   53   54   55   56   57   58   59   60   61   62   63   64   65   66   67   68   69   70   71   72   73   [ 74 ]   75   76   77   78   79   80   81   82   83   84   85   86   87   88   89   90   91   92   93   94   95   96   Last
Seach Parameters

Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com