Resume - Quality Specialist experienced in Quality Management System, being aware of spec...

Misco Jobs

Resume #68718

CONTACT INFORMATION:
View contact information...

- QA/QC Engineer -

PERSONAL PROFILE

Quality Specialist experienced in Quality Management System, being aware of specific Inspection Techniques, including NDT Techniques (UT, MT, PT) and offering over 25 years experience in QA/QC environment acquired in Metallurgy (Rolling Mills for Steel Products) and Construction (Prestressed Concrete Cylinder Pipes and Fixed Offshore Structures).

EMPLOYMENT

PETROM SA, Romania (Member of OMV Group) / IMPaC Offshore Engineering GmbH Germany – Petromar Offshore Upgrade & Development Programme (Black Sea).

Project Quality Coordinator (Client Representative) (May 5, 2008 to present)
* As part of an Integrated Project Management Team of Petrom SA I am responsible for capturing and reporting all Quality issues requiring resolution, being the primary offshore interface with contractor.
* Liaising with the Contractor's/Supplier's representatives for scheduling all witnessing and inspection activities as identified within the Programme Quality Plans and Inspection & Test Plans.
* Monitor inspections during operations (onshore and offshore) to ensure these activities are completed in a safe and efficient manner and meet both technical and contractual requirements.
* Perform Site inspection by visiting suppliers/plants, being responsible for expediting completion and delivery of materials and equipment to ensure conformance with purchase order agreements and project requirements.
* Witnessing the construction of Jackets, Platforms, Modules, and offshore hook up at EPC Contractor and Subcontractors sites.
* Maintain Quality audit schedule and perform Contractor Quality audits as required, ensuring timely closeout of audit findings.
* Responsible for establishing and ensuring that preventive actions are implemented and corrective actions are taken within my area of responsibility.

SAIPEM S.p.A. Italy – Kashagan Offshore Project on Caspian Sea, Kazakhstan - Piles and Flares Installation.

QA/QC Supervisor (May 8, 2006 to September 30, 2007)
* Reporting to the QA/QC Project Manager, maintaining liaison link between Barge Superintendent and Field Engineer, I supervised all the quality matters of the Offshore Installation of Piles, Flares Process and Utility Barges;
* Prepared the Project Quality System procedures and Quality Plans in San Giuliano Milanese Office, Italy;
* Maintained an update status of progress against the installation plan by checking completion and signing off;
* Monitored the collection of "As built" data for project;
* Surveyed and verified that scheduled testing and inspections were performed and documented during the execution of work as required by site Quality Control Plans and reference standards;
* Supervised the work of the Quality Inspectors team (Welding Inspectors and NDT Inspectors);
* Coordinated quality meetings with the Client, construction contractors, and site supervision personnel, in order to analyze and contribute to the solution of quality-related problems;
* Temporarily deputised in the position of QA/QC Supervisor - Client Site Representative in Kuryk Yard, surveying the construction works for offshore activities at ER SAI Caspian Contractor LLC (Subcontractor of Saipem).

SC VEMA&COMP SA Deva - Romania: Manufacture of Steel Components by cutting, welding and machining for various branches of equipment, railroad car and road vehicle building industry.

QA/QC Manager (November 1st., 2005 to April 7, 2006)
* Reporting directly to the General Manager, provided leadership for developing and directing Quality Management System and quality improvement for all products and services;
* Maintained all the necessary documentation related to Quality system, ISO and other industry guidelines;
* Organized and implemented the internal audits and supplier audits;
* Managed and maintained the Company's Quality inspection and product release programs for incoming and in-process materials and components, machined products, and finished goods;
* Conducted in-house training and awareness programs for QA/QC Inspectors;
* Managed Customer Complaints;
* Monitored Non-Compliance reports and took corrective actions to assure timely completion.

SNC LAVALIN INTERNATIONAL Inc. Canada/ SARIR PCC PIPES PLANT Libya (Great Man-Made River Project – Phase 1): Manufacture of Prestressed Concrete Cylinder Pipes.

QA/QC Engineer (May 1st., 2003 to December 10, 2004)
* Reporting directly to the QA/QC Manager for all project tasks and approvals, involved in all major areas of Pre-stressed Concrete Cylinder Pipes and Special Pipes Manufacture, I planned and supervised shop inspection program to ensure that products comply with contractual requirements;
* Established and maintained a close working relationship with all project inspectors, the Client and Lead Discipline Engineers on all quality related matters towards the success of the project. Fully knowledgeable on the application of construction codes and standards and Quality Management Systemm based on ISO 9000 series;
* Developed Quality Inspection and NDT procedures and contributed in the implementation of the Quality System;
* Evaluated deficiencies and issued nonconformance reports when applicable;
* Monitored the everyday schedules of final inspections with the Client witness;
* Prepared final quality record documents for the Client.

SC SIDERURGICA SA Hunedoara - Romania: steelworks, foundry, rolling mills for round and square bars, steel wire, sections.

QA/QC Engineer - Rolled Steel Products (November 1st., 1990 to March 3rd., 2003)
* Supervised the work of a Quality Inspectors team (20 to 30 Inspectors);
* Responsible for the application of Quality System (in respect of procedures) in the site and developed Quality Inspection Procedures;
* Systematically recorded and handled nonconformity reports issued on site, ensuring that the resolution of nonconformities met the acceptance criteria and that timing complied with site requirements;
* Adjusted and decreased complains referring to unsuitable quality of several products, by visiting or talking to clients about technical issues or problems;
* Defined and put in practice corrective actions for the improvement of products' quality;
* Operated nondestructive ultrasonic testing for special products;
* Prepared and presented technical and program information to the QA/QC Manager.

SC SIDERURGICA SA Hunedoara - Romania: steelworks, foundry, rolling mills for round and square bars, steel wire, sections.

Quality Inspector (November 15, 1980 to October 31, 1990)
* Inspected the rolled steel products (visual inspection and nondestructive ultrasonic testing);
* Administrated and registered Quality Documents (typing quality certificates, document's archive).

EDUCATION

* Bachelors Degree in Metallurgy - Plastic Strains and Heat Treatments - Polytechnic Institute "Traian Vuia" of Timisoara / Engineering Institute of Hunedoara, Romania (1985);
* High School Diploma in Metallurgy - Rolling mill Operator - Nr.1 Industrial High School of Hunedoara, Romania (1979);
* NDT Courses: Ultrasonic Testing Method, Liquid Penetrant Method and Magnetic Particle Testing Method (level II);
* Course Certificate – Quality Management System Documentation (ISO 9001:2000) – Chamber of Commerce, Industry and Agriculture Timisoara, Romania / (2005);
* Course Certificate - Internal Auditor for Quality Management System (ISO 9001:2000) - SIMTEX Certification Body of Bucharest, Romania (2005);
* Specialization Course – Quality Specialist - Chamber of Commerce, Industry and Agriculture Timisoara / Ministry of Labour, Family and Equal Opportunities & Ministry of Education and Research, Romania (2008).

MISCELLANEOUS

* Mother tongue: Romanian
* Foreign languages:
- French (advanced level);
- English (advanced level);
- Italian (medium level, in course of perfecting);
- Spanish (beginner level, in course of perfecting)
* Computer skils: Word, Excel, Internet
* Driving licence: B
* Personal Safety Logbook – Basic Offshore Safety Introduction and Emergency Training (BOSIET), Air Pocket Plus Training, Properties Danger Aspects and Measurements of Hydrogen Sulphide – NUTEC Rotterdam, The Netherlands B.V., (August 2006)

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 501 to 550 of 4758)

Go to Search Parameters...

Brief Description

I am a fully qualified Cost Engineer and Estimator and have contract claims experience. Please see resume for details.

Senior Executive with verifiable performance in the fields of Project / Operations Management and Techno-Commercial management in Shipyards and Oil & Gas industry.

Experienced General Manager with Emphasis on Sales and Operations

Quality Specialist experienced in Quality Management System, being aware of specific Inspection Techniques, including NDT Techniques and offering over 25 years experience in QA/QC environment acquired in Mettallurgy and Construction (Prestressed Concrete Cylinder Pipes and Oil&Gas Inst.)

I am a grduate in Civil Engineering and an Exprerience of 34 years as Civil Engineer (5years work experience at El Kufrah, Govt. ofLibya). I have acquired Diploma in Computers in Office management in the year 1991 & utilised M.S. Word & Excel while sending formats to the World Bank, New Delhi.

Over 28 years in the engineering construction industry including more than ten years on international assignments

Seeking a job of Resident Engineer in Middle East (hoghways,infrastructure,buildings)holding more than 20 years experience in international companies.

Structural designer and progect engineer experienced in designing , supervising and progect management on large residental and industrial projects in Libya and Bulgaria,elegible to be member of Professional Engineers Association of Ontario, Exelent skill in desigh and inspection of steel and RCS

BS Business Administration Major in Accounting graduate and presently a Materials Management Manager

Estimating project managing scheduling coordination with general owner to make sure schedule can be met purchasing preparing submittals laying out preparing ASI's RFI's RFP's completing project from start to punch list.

I have more than 15 years experience in safety and environmental policy implementation for construction sites , drilling , workovers and explorations, refineries, pipelines, shipyard and offshore/onshore oilfields installations.I worked with clients Bechtel, Technip, Chiyoda, Brown and Root, Flour D

I'm a civil engineer andhad worked in different countries. I've been in this field for about 20 years.

Skilled building Quantity Surveyor with a degree and over twenty years of experience both as a PQS or Contractors Qs. Fields of performance include preparation of bills of quantities, bid documents , valuations, final accounts, claims, cost estimates, pricing, material schedules.

20 years of progressive EPC project contracts experience. Recent refinery up-grade construction contracts work in the arena of contracts administration are detailed on a comprehensive resume available upon request.

Thorough knowledge of all aspects involving residential,commercial and Industrial HVAC and Electrical systems. Extensive sxperience working and leading project teams worldwide in challenging technical environments and different cultures. Understanding and ability to work with other disciplines.

PMI and CMAA Certified Project Manager with a BSME avilibile for large scale Mechanical/HVAC Projects as a Senior Project Manager or Owners Rep. Willing to work Agency, Contract, Direct Hire and International Projects.

VP Sales used strategic planning to increase annual profit by $13 mm and sales by 17% in a declining market. Proficient in marketing and sales management (direct, business-to-business, consultative, & value added). Negotiated contracts in excess of $1 mm. Record sales in 5 of the past 9 years.

heighted , office oriented, global person

CNC Service Manager and Technician / Building Project Manager

Preparing Concrete profiles. „« Preparing P.T. Design Drawing and Shop Drawing as per the Engineers Design (ADAPT or RAM Programs).

Seeking for a position of Store Keeper where I can leverage my valuable experience of management skills with potential of growth and challenging environment. Confident and have potential to directs the work or other communications.

SAP Procurement

Welding Inspector 3.1, Welding Engineer

Postgraduate in Civil Engineering with specialization in Infrastructure, Highways & Bridges, Soil & Materials engineering & Project Management Systems with about 17 years of professional experience in construction supervision, design of Highways & Infrastructure projects

Construction/Commissioning Instrumentation & Control Superintendent, or Project Management (PMC-role), or I & C Field Engineer/Supervisor, or I & C Maintenance Engineer

I am civil engineer, working as consruction planning engineer at Mott MacDonald India from India And seeking job at Austrilia with visa support from employer.

heavy equipment mechanic

CAD Drafter with 14 years of experience in most commonly used software for Architectural and Civil Engineering Firms.

run different types of cranes. friction, tower, experience in pile driveing. 30 yrs.e xperience

The maintenance of comprehensive accident and dangerous occurrence statistics for the Project

22+ years of professional knowledge and experience in QA/QC Engineering and Field Civil Construction on EDPC onshore oil/gas/petrochemical plants, defense, infrastructure projects in the Middle East, UAE, Iran and North Africa.

Engineering/Management professional offering expertise in domestic and international construction management and engineering support. Demonstrated proficiency in managing schedules, budgets and personnel for multiple projects with an emphasis on profitability in a variety of environments.

Entrepreneur; international construction materials trader; international business developer; real estate projects developer; building materials exporter; purchasing and sales of construction materials; manufacturer's representative; international contracts negotiator.

Licensed Civil Engineer with BS degree in Civil Engineering; over 20 years experience in Land Surveying and Civil Engineering in government projects (irrigation, dam, reservoir, roads), construction and surveying firms in the Philippines and abroad.

• Perspective gained through advancement from field operations, through front-line supervision to senior staff management and administrative positions.

HNC Qualified Engineer with an extensive experience in a broad cross-section of engineering, predominantly structural/mechanical civil/building services, familiar with all aspects of project management. I.e. planning, cost control, tender evaluations, contract law, health and safety.

I have over 35 year's experience in the Cement Industry, Machinery Manufacture, Refractory Technology, Large Projects Execution and Commissioning,

Over 25 years of experience of which have more than 15 years of experience in Developed Countries.

ELECTRICAL-MECHANICAL TECHNICIAN CONSTRUCTION – INDUSTRIAL & MANUFACTURING OPERATION & MAINTENANCE – COMMISSIONING – CONTROLS – LO-MED-HI VOLTAGE ELECTRICAL INSTALLATION & MAINTENANCE – HVACR – WATER AND WASTEWATER TREATMENT PLANT.

Responsible for all accounting activities from trial balance to financial statement and balance sheets and financial report from time to time, supervision & control of financial, cost & management accounts of the company up to finalization

Project Superintendent, Instrumentation, Piping, Civil, Electrical

Procurement & Supply Chain Management

Has twenty one (21) years of experience in the Field of Engineering, Design and Construction. Experienced in Front End Eng’g, Preliminary Eng’g & Detail Eng’g / Design Phase Work-share Execution, and Construction / Final Design / Eng’g Support for Construction / As-built Phase & Quantity Surveying.

I can run just about any kind of equitment you have To do a job in construction, I ran a crew of 20 men for 6 year's and built forms, poured concrete,built house's and metal buildings I can read blue print's I do have about 2 year's of oil field exp. Motorman and Floorhand, Some Driller asst. exp.

Executive Director, Operation In Charge, Managing Director

CAD Technician

Free! Experienced Project Manager, Divisional Manager, with a proven track record of success in Construction, Interiors and Finishing works. MEng Degree Mechanical Engineering, ILM level 5 Diploma in Management,CITB Appointed Persons.IOSHI Certified.B S Construction Health and Safety

Skill : Computer microsoft office, Auto CAD, GPS application and Mapping

Graudation in Political Science and Post Graduation

Survey and layout subdivision lots for rural and urban development and established and marked legal boundaries of properties using different kinds of surveying instruments.

First 1 2 3 4 5 6 7 8 9 10 [ 11 ] 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out