Resume - I am a bachelor of engineering degree holder, with vast experience in oil and ga...

Misco Jobs

Resume #69415

CONTACT INFORMATION:
View contact information...

1. October 2007 Till date: Daewoo Nig. Ltd
LOCATION: DN-54 INTEGRATED OIL AND GAS PLANT PROJECT
GBARAN UBIE SHELL PROJECT.
POSITION: Equipment Supervisor
FUNCTION:
*Maintenance planning and scheduling for all plant equipments
*Monitoring of daily plant equipment operations
*Preparation of maintenance checklist and preventive maintenance checklist for all plant equipment.
*Preparation of JHA for all maintenance operations
*Ensure safety compliance in all maintenance work as specified in work procedures
2.Jan. 2003 Till Sept. 2007: DAEWOO NIG. LIMITED
LOCATION: DN-48 NLNG PLUS/NLNG SIX PROJECT, BONNY ISLAND
.
POSITION: Crane/Equipment Inspector

FUNCTION:
Calibration of the following load moment indicators models in cranes:
*Load wise 500 series
*Pat. Kruger mark 3E/2
*Pat. Kruger mark 4E/2
*Pat. Greer LALT-11511L
*Pat. Greer DS350GW
*Pat. Greer DS350/1319
*Pat iflex 5
*Wylie systems W1250 Load indicators.
.
Inspection of Lattice, Telescopic and Tower cranes, lifting beams, Gantry and overhead cranes base on American and British standard in conjunction with Nigerian regulations on crane inspection.
*Review of rigging plans for heavy lifts including cryogenic heat exchangers
*Maintenance planning and daily monitoring of all the cranes and equipment
*Supervision of all heavy lifts on site
*Preparation of job safety analysis for lifting operations.
*Training of operators in the use and setting of load moment indicators, reading of load charts, duty charts and deduction charts as applied to safe lifting operations.
*Preparation of inspection reports and specific maintenance checklist for cranes and equipment.
*Training of crane operators, riggers and operators of articulated vehicles and issuance of certificate of competency.
*Daewoo nominated competent person to TSKJN(NEP) for lifting and rigging equipment.
*Assist equipment manager in the administration of equipment section
* Daewoo contact person to TSKJ and NLNG for all shutdown equipment and inspections.
*Preparation of Environmental activity checklists and environmental aspects and impacts analysis in equipment workshop in compliance with ISO-14001.
*Monitoring of environmental compliance with ISO-14001 in equipment workshop.
3. JUNE 2000 TILL JAN 2003: DAEWOO NIG. LIMITED
LOCATION:DN-45/DN-48 NLNG PROJECT/NLNG EXPANSION PROJEC/NLNG SIX PROJECT,BONNY ISLAND.
POSITION: Piping Engineer.
CO-ORDINATE FABRICATION SHOP AND FIELD PIPING PROCESS
FUNCTION:
*Study and interprets Isometric drawings
*Check spools dimension, Spool orientation and fit-up.
*Check edge preparation, welder qualification, electrode and filler metal use.
*Visual inspection after welding and selection for NDT.
*Application codes ASME Section 1X, ISO 9000.
*Preparation of test packs and punch out of items.
*Supervision of pipe spools fabrication.
*Work with group of welders and fitters.
4.Jan 1998 Till JUNE 2000: DAEWOO NIGERIA LIMITED
LOCATION: DN25/DN-34 NLNG PROJECT, BONNY ISLAND
POSITION: Quality Assurance /Quality Control Inspector
CO-ORDINATE QC NDE TEAM.
FUNCTION:
Compilation of NDE request spools to SGS Inspection Services with accordance to:
*Spool location (Areas/Bunker)
*Isometric number
*Pipe class
*Spool number
*Inspection class of pipe
*Train number
*Diameter and schedule
*Welders Number as per joint welded
*Weld number (Shop weld and field weld)
*Percentage NDE type (RT, MT, PT, UT, and PAMI)
*Compilation of back log weld after NDE test.
*Applicable codes ASME Section V NDT and ASME Section 1X
CO-ORDINATE QC NDT TEAM
FUCTION:
*Check all NDE result with SGS
*Reviewed of radiographic films from SGS
*Update summary NDT report
*Follow-up of outstanding result
*Update backlog
*Confirm result with NDE request

CO-ORDINATE QC TEAM (FABRICATION SHOP)
FUNCTION:
*Study and interprete isometric drawings
*Check spools dimension, Spool orientation and fit-up.
*Check edge preparation, welder qualification, electrode and filler metal use.
*Visual inspection after welding and selection for NDT
*Applicable codes ASME Section 1X, ISO 9000.
5. MAINTENACE ENGINEER(N.Y.S.C), WORK DEPARTMENT IKENNE LOCAL GOVT. Ogun state(Nov. '95-Nov.'96)
FUNCTION:
*Overhauling of diesel engines of tractors, bulldozers and graders.
*Servicing of transmission and gear box for tractors, bulldozer and graders.
*Rehabilitation of steyr tractors.
*Servicing of cooling systems of bulldozer.
*Overhauling of rice milling machine
*Corps Liason Officer, Ikenne Local Govt. Area
.6. TECHNICAL OFFICER-ENGINEERING WORHSHOP CROSS RIVER AGRIC. DEV. PROGRAMME CALABAR(JUNE, '93-MARCH'94)
FUNCTION:
*Rehabilitation of planters and cultivators
*Supervised the cultivation of 25 hectares cassava farm.
*Supervised the construction of feeder roads, culvert and drainage systems
*Orientation on engineering safety in the workshop.
EDUCATIONAL BACKGROUND AND QUALIFICATION:
1. Universty of Agric. Makurdi, 1995 B.Eng.(Hons) Second class
Lower division
(Power &machinery option)
2. Federal School of Arts&Sciences, Ogoja
3. Mary Knoll College, Okuku-Ogoja 1987 SC/GCE
PROFESSIONAL QUALIFICATION:
1. ASNT-LEVEL 11 Certificate in Radiographic test(RT) OCT. 2001
2. ASNT-LEVEL 11 Certificate in Magnetic test(MT) OCT. 2001
SPECIAL ATTRIBUTES: Computer Literacy in;
*Microsoft office
*Microsoft excel
*Microsoft word
*Powerpoint
COURSES AND SPECIFIC JOB TRAINING ATTENDED

*Safe Task Assignment and Re-enforcement Training (START) TSKJ NLNG Bonny
*Safety Training Observation Programme (STOP) TSKJ NLNG Bonny
*Confined Space Training TSKJ NLNG Bonny
*Defensive Driving Training TSKJ NLNG Bonny
*Scaffolding Safety Training /inspection. TSKJ NLNG Bonny
*Leadership training course TSKJ NLNG Bonny
*Shell HSE competence Level 111 Portharcourt
QA/QC COURSES

*Weld repair status
*Weld defect analysis
*Causes and prevention of weld repair
*High repair rate welder
*Welding material control
*Welding procedure specification (NLN-IPI-GT13(ER-70s-G)
NLN-IPI-GSTM-12(ER71s-G +E7016G)

HOBBY: Swimming, reading watching movies

REFEREES:
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 351 to 400 of 4331)

Go to Search Parameters...

Brief Description

OBJECTIVE :- To strive and achieve excellence in functional areas , constantly strive and create value, and attain higher benchmarks. EMPLOYMENT EXPERIENCE: Over two decades of experience in the field of various Civil Engineering Projects.

More than nineteen years in the field of construction,some engineering & design works for oil& gas, petrochemical, power plant, expansion, revamp projects.

Over 20 years of experience in diesel engines ,marine propulsion system and generator set working in the middle east and gulf region for more than 15 years U.A.E and Saudi driving license a valid resident in U.A.E read ,write ,speak English , Arabic ,German

Senior Project Architect with extensive construction supervision and design experience willing to relocate to overseas/Middle East

-Mechanical Engineering, member of ASME, PMI, -computer skills include Primavera Project Planner & MS Project. -Sr. Maintenance/Project Planning/Scheduling Engineer -long experience in Oil & Gas Industry -Project Controls Engineer/Manager. -Fluent in English & Arabic. Canadian Citizen.

I'm presently working as Planning/Scheduler and at the same time Quantity Surveyor here in Yanbu, Saudi Arabia. Our on going project is the Royal Commission Field Office and 4 bridges.

Hard dollar Mechanical Estimator/Project Manager experienced with Estimation and Quick Pen seeks West Coast Position.

21 year professional with experience in safety/operations turn arounds, business development, strategic planning, government regulations, P&L, Construction Equipment Operations/Maintenance and Construction Management.

Represent corporation at the regional / local level. Administer local contracts, interface with clients, assist with field issues, transportation, housing, energy. Fluent in ARABIC, ITALIAN, GREEK, SPANISH, ENGLISH. Knowledge on Libyan culture, customs, religion, geography, and geopolitics.

Am immediately available. I have 23-years Safety and Health experience, including: * 12-years in Production * 20-years Consulting/Training * 6-years in Construction Other experience: * 7.5-years Criminal Justice/Anti-Terrorism. * 26-years Emergency Medical Technician (EMT).

Performed conceptual design, design devel, work drawings, specs. Recent emphasis has been more on managing teams of architects and engineers, coordinating documents and specifications. Major strength is producing quality documents and teaching others to produce high quality work.

Experience and skills: 1) Electrical Engineering, HT & LT systems, power systems, instrumentation and control. 2) Projects' management. 3) Service and customer support. 4) Sales and marketing. Worked for 3 years in Nigeria in various construction projects.

20+ years Civil Engineering experience on Public Works, Utilities, Industrial, Commercial and Residential projects. Experienced in streets, highways, water systems, sanitary & industrial sewers, airports, site development, grading, drainage, underground piping and specifications

Professionally qualified Civil Engineer with a PG degree in Construction Management with over 20 years experience in Asian Development Bank, World Bank and Other Internationally funded road projects in South East Asia and Pacific region.

I have educated all levels of staff, lowered lost time cases and injury rates, reduced workers' compensation costs and resulted in positive inspections on many levels - OSHA, EPA, DOT, ANSI, JCAHO and DOH.

Professional Electrical Engineer with 30+ years experience. In the latter 20 years my experience has been in a wide range of areas of project engineering predominantly in heavy industry. Looking for new challenges any location

EMI, EMC, Signal Integrity,Compliance and Regulatory

Mechanical engineer having 6yrs construction experience in the field of oil and gas.

Purchasing and Materials professional with over 35 years experience worldwide. Career minded and adaptable individual always interested in a responsible position in the Engineering, Construction and Mining industries.

Manager for techno commercial jobs in mining machinery

Business Plan Modeling, Project Management, Motivational Team Leader

I am a grduate in Civil Engineering and an Exprerience of 34 years as Civil Engineer (5years work experience at El Kufrah, Govt. ofLibya). I have acquired Diploma in Computers in Office management in the year 1991 & utilised M.S. Word & Excel while sending formats to the World Bank, New Delhi.

Over 28 years in the engineering construction industry including more than ten years on international assignments

Seeking a job of Resident Engineer in Middle East (hoghways,infrastructure,buildings)holding more than 20 years experience in international companies.

Structural designer and progect engineer experienced in designing , supervising and progect management on large residental and industrial projects in Libya and Bulgaria,elegible to be member of Professional Engineers Association of Ontario, Exelent skill in desigh and inspection of steel and RCS

BS Business Administration Major in Accounting graduate and presently a Materials Management Manager

Estimating project managing scheduling coordination with general owner to make sure schedule can be met purchasing preparing submittals laying out preparing ASI's RFI's RFP's completing project from start to punch list.

I have more than 15 years experience in safety and environmental policy implementation for construction sites , drilling , workovers and explorations, refineries, pipelines, shipyard and offshore/onshore oilfields installations.I worked with clients Bechtel, Technip, Chiyoda, Brown and Root, Flour D

I'm a civil engineer andhad worked in different countries. I've been in this field for about 20 years.

Skilled building Quantity Surveyor with a degree and over twenty years of experience both as a PQS or Contractors Qs. Fields of performance include preparation of bills of quantities, bid documents , valuations, final accounts, claims, cost estimates, pricing, material schedules.

20 years of progressive EPC project contracts experience. Recent refinery up-grade construction contracts work in the arena of contracts administration are detailed on a comprehensive resume available upon request.

Thorough knowledge of all aspects involving residential,commercial and Industrial HVAC and Electrical systems. Extensive sxperience working and leading project teams worldwide in challenging technical environments and different cultures. Understanding and ability to work with other disciplines.

PMI and CMAA Certified Project Manager with a BSME avilibile for large scale Mechanical/HVAC Projects as a Senior Project Manager or Owners Rep. Willing to work Agency, Contract, Direct Hire and International Projects.

VP Sales used strategic planning to increase annual profit by $13 mm and sales by 17% in a declining market. Proficient in marketing and sales management (direct, business-to-business, consultative, & value added). Negotiated contracts in excess of $1 mm. Record sales in 5 of the past 9 years.

13 years of Land Surveying with 9 years in a Party Chief Position and 8 years experience with GPS

heighted , office oriented, global person

I am a bachelor of engineering degree holder, with vast experience in oil and gas construction projects, i have experience in crane and equipment inspection, plant maintenance and supervision, quality control welding and fabrication and piping process. I am fluent in english .

19 yr. construction manager that started when I was 18 yrs. of age working for my families land development and construction company. I consider myself to be best in this industry.

10 years of total experience in engineering geology & rock engineering in site investigations, slope stability, foundations and risk assessment of structures of Civil Infrastructure projects like Tunnels, power station, underground Chambers, Dams, bridges, road cuttings.

Senior mechanical engineer with experience in engineering for material handling, industrial installations and conveying machines in steel industry, mining, cement & chemicals. Start-up assistance for steel industry.

Construction/Commissioning Instrumentation & Control Superintendent, or Project Management (PMC-role), or I & C Field Engineer/Supervisor, or I & C Maintenance Engineer

22+ years of professional knowledge and experience in QA/QC Engineering and Field Civil Construction on EDPC onshore oil/gas/petrochemical plants, defense, infrastructure projects in the Middle East, UAE, Iran and North Africa.

Engineering/Management professional offering expertise in domestic and international construction management and engineering support. Demonstrated proficiency in managing schedules, budgets and personnel for multiple projects with an emphasis on profitability in a variety of environments.

Entrepreneur; international construction materials trader; international business developer; real estate projects developer; building materials exporter; purchasing and sales of construction materials; manufacturer's representative; international contracts negotiator.

Licensed Civil Engineer with BS degree in Civil Engineering; over 20 years experience in Land Surveying and Civil Engineering in government projects (irrigation, dam, reservoir, roads), construction and surveying firms in the Philippines and abroad.

• Perspective gained through advancement from field operations, through front-line supervision to senior staff management and administrative positions.

HNC Qualified Engineer with an extensive experience in a broad cross-section of engineering, predominantly structural/mechanical civil/building services, familiar with all aspects of project management. I.e. planning, cost control, tender evaluations, contract law, health and safety.

I have over 35 year's experience in the Cement Industry, Machinery Manufacture, Refractory Technology, Large Projects Execution and Commissioning,

Over 25 years of experience of which have more than 15 years of experience in Developed Countries.

ELECTRICAL-MECHANICAL TECHNICIAN CONSTRUCTION – INDUSTRIAL & MANUFACTURING OPERATION & MAINTENANCE – COMMISSIONING – CONTROLS – LO-MED-HI VOLTAGE ELECTRICAL INSTALLATION & MAINTENANCE – HVACR – WATER AND WASTEWATER TREATMENT PLANT.

First 1 2 3 4 5 6 7 [ 8 ] 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out