Resume - QUALIFICATIONS SUMMARY: Eleven years experience in Generator mechanical, electri...

Misco Jobs

Resume #69632

CONTACT INFORMATION:
View contact information...

QUALIFICATIONS SUMMARY: Eleven years experience in Generator mechanical, electrical troubleshooting, and repair. Six years experience as quality control inspector for the United States Navy. I have experience with all types of generators from 2k to 635k both civil and military. I can read all schematics and effectively isolate and troubleshoot components and circuits in both AC and DC systems.
I have experience with LSI job packets and QAQC inspection process through training with QAQC.

AREAS OF PERTISE:
-Digital meters -Schematics -Fork lifts -Hydraulics

-Troubleshooting -AC/DC Motors -Tractors -Mobile Facilities

-Gasoline Engines -Cranes -Two Stroke Engines

-Diesel engines -Cryogenics

And extensive knowledge on the following test equipment:
-Oscilloscopes -Power Meters -Load bank
-Frequency Co -Cylinder pressure gauge -Timing gun
-Multi-meters -AC/DC Voltage Standards -Power Supplies -Resistance Standards

JUN 1999 April 2006Quality Control Inspector U.S.N
Duties: Inspection, Quality Control, and Safety of eight separate work centers. Monitored the Safety, hydraulic testing, Cryogenic storage and training programs to insure program integrity was being met.
1 Performing material acceptance inspection, entering system database, assigning it to a work center, and issuing priority to all aircraft sub-systems that are sent to logistics squadron for repair.
2 Approving, issuing priority, and tracking through requisition numbers, all parts needed for aircraft sub-system repair.
3 Collecting, screening, and ordering approximately 5,000 dollars of maintenance support supplies making a safer more productive environment.

JUL 1996 - APR 2007 GENERATOR MECHANIC U.S.N

Duties: Inspecting, testing, maintaining, and repair of diesel, gasoline engines, hydraulic components, assemblies, sub assemblies, modules, cards, printed circuit boards, and ancillary equipment whose aggregate constitutes a complete mechanical system or subsystem.
1 Repair and maintenance on all generators from 2k to 635k both electrical and mechanical.
2 Break down and repair of all aspects of diesel and gasoline engines from regular maintenance to the complete repair or replacement or major or minor parts including engine swaps.
3 Applies the theory of impedance, resistance, capacitance, and inductance to Support Equipment Starter and Test systems.
4 Uses electronic schematics, block diagrams, wiring diagrams, color codes, and other technical publications.
5 Uses technical and supply publications to obtain accurate data for supply purposes.
6 Isolates and diagnoses Power Plant systems and subsystems for errors and failures in the operation to quickly and efficiently correct the problem.
7 Performs the necessary corrective action prescribed in applicable maintenance instructions for corroded and deteriorated mechanical and Electronic components.
9 Master trouble shooter in all aspects of my rating including: Hydraulic systems, cryogenic systems, mobile maintenance facilities, turbines, and gas and diesel engines.

JUNE 2001-JAN 2007 Work Center Supervisor; U.S.N.
1 Effectively run the day to day operation of my work center in the completion of daily tasks in support of the current Navy mission objectives.
2 Supervised the installation and maintenance of A/C and D/C industrial motors, control panels, conduit.
3 Operated and Licensed on all equipment in my job field: 20ton and 6ton fork lifts, mobile electric power +/plants, hydraulic power plants, crash cranes, fire trucks, and tractors.

MAY 2007- CURRENT GENERATOR MECHANIC (LSI)
Duties: Inspecting, testing, maintaining, and repair of diesel, gasoline engines, assemblies, sub assemblies, modules, cards, printed circuit boards, and ancillary equipment whose aggregate constitutes a complete mechanical system or subsystem.
1 Repair and maintenance on all generators from 2k to 1000k both electrical and mechanical.
2 Break down and repair of all aspects of diesel and gasoline engines from regular maintenance to the complete repair or replacement or major or minor parts including engine swaps.
3 Applies the theory of impedance, resistance, capacitance, and inductance to Support Equipment Starter and Test systems.
4 Uses electronic schematics, block diagrams, wiring diagrams, color codes, and other technical publications.
5 Uses technical and supply publications to obtain accurate data for supply purposes.
6 Isolates and diagnoses Power Plant systems and subsystems for errors and failures in the operation to quickly and efficiently correct the problem.
7 Performs the necessary corrective action prescribed in applicable maintenance instructions for corroded and deteriorated mechanical and Electronic components.
8 Complete all packet paperwork before and after job is complete to get equipment back in the customers hands within an acceptable time frame.

APRIL 2005 - APR 2007: General Manager; Domino's Pizza
1 Controlled sales food and labor of a 20,000 a week store.
2 Hired and trained Quality team members with one of the lowest turn around on employees on the east coast.

SUMMARY OF WORK HISTORY
JUNE 1996- APR 2007, U.S.N. Aviation Support Technician
APR 2005- Current, Domino's Pizza/ General Manager

SPECIAL LICENSING AND CERTIFICATIONS
10-June-2001 EPA Universal certification for purchase and maintenance of refrigerant: USN Certificate of training
21-Nov-1997 Maintenance, isolation, and diagnoses of Mobile Power Plants: USN Certificate of training
06-SEP-2000 Individual component trouble shooting and repair: USN Certificate of training
04-Feb-2002 Diesel, gasoline engine repair for ground support equipment: USN Certificate of training.
12-JAN-2000 Microsoft word and excel certificates. USN Certificate of training

EDUCATION
1996- High school diploma
1998- 24 credit hours from Texas A & M
2000- 18 credit hours from University of Oklahoma
2006- 22 credit hours from Colorado state university

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1001 to 1050 of 4371)

Go to Search Parameters...

Brief Description

Electrical Power Engineer (Project and Planning)

Project Manager over $28 million project

Working in Saudi Arabia I gained valuable practical experience, I also developed my project management, communication and organizational skills, essential attributes in order to lead in my field by building a solid technical and theoretical background.

6+ years Programming and Drawing experience in CAD with a broad understanding of Java, Visual Basic 6, Developer 6i, Java Servlet, Java Networking, Perl, C Language, Iappli, MIDlet CATIA,I-DEAS, UGS-NX, Inventor, AutoCAD 2007, Mechanical Desktop, Pro/E , J2ME, JSP,ODBC, SQL, Oracle, Postgre SQL, RDB

Diploma in Industrial Safety Management , COMPUTER HARDWARE, SOFTWARE TROUBLESHOOTING AND NETWORKING

Estimator

Certified Project Management Professional (PMP), and very organized, articulate and detailed-oriented professional architect, with a strong educational background and more than twenty years of professional experience, a superior work ethic, developed skills and commitment to excellence.

have plenty of site experience .always worked with big organizations. well computer literate. worked on power station ,industrial and residential buildings

I am a diploma holder in mechanical engineering having 7 years experiance in metalic /non metalic piping both above and under ground

Mechanical Engineer - Inernational Purchasing - Project Management

A competent engineer with a broad range of skills and experience in civil and structural engineering works. Highly self motivated and capable of working under pressure. Seeking employment to broaden my skills and experience with a view to developing a career in construction management

Experience mostly in construction Company, Infrastructure Project, Power Plant, and Railway Project.

More than 10 years as an AutoCAD Draftsman in construction firm.

Piping Supervisor / Piping Area Team Leader / Sr. PDS Pipe Designer / PDS Instructor / Piping Field Engineer

MEP engg in ETA ASCON group of company at Dubai .UAE.

First class marine engineer

Ø Seeking a challenging and responsible job as a Civil Engineering professional where I could utilise my diversified experience of 12 years in construction industry of multi-storeyed residential, commercial and Industrial projects Petro-chemical Refinery Oil and Gas Field etc.

In the last 18 years, I have directed activities and managed more than 36 long-and short-term projects valued at $200,000 to $20 million. My range of activities have spanned from staffing to contract negotiations to OSHA inspections to client interaction to project turnover and completion.

Civil Engineer and Engineering Geologist (Experienced in Geotechnical Investigations and Designs)

Heavy equipment workshop or field manager supervisor seeking overseas position anywhere in either construction, tunnelling, or oilfields. Available immediately, short term or long. Prefers demanding position.

Iam a Mechanical Engineer with Technical sales experience in various industries . I am having good communication skills and flair for sales. I like challenging jobs with a target oriented approach. I am sincer, hardworking,and a honest guy. My hobbies include socialising ,travelling,reading

I am a skilled and experienced heavy equipment operator with years of experience on various machine types. I have had asbestos training and would love to receive on the job training in crane operation..

Structural & Misc Steel Detailers

I have passed MSc in Geology from Nepal and Professional Master Degree in Geological Engineering from the Netherlands in 2003. I have about 10 years work experience. My experience is especially on core drilling and tunnel excavation. A present, I have been looking for a job in Australia.

Knowledgeable in Procurement, Materials Management and Piping.

Mechanical Engineer(Diploma) Around 20 yrs experience of Erection, commissioning & Maintenance work at 4 different modern continuous process Cement Plants up to 10,000 TPD and LOESCHE Germany India office.

Planning Engineer Infrastructure ,Oil & Gas & 5 years

DCS APPLICATION ENGINEER WITH 4 YEARS EXPERIENCE

I HAVE BEEN WORKING IN LABELLING, MIXING, QUARRY MATERIALS, ROAD OPENING, MINOR MAINTAINANCE OF THE MACHINE,.

ERP, Consultancy, Movex, HumanResources Implementation, Payroll Implementation, Managment, Consulting Services, Independent

Presently Working with Samsung Engineering in Seoul Head Office as Lead Project Controls Since Nov 04 Trend/TIC program Implementation Contracts Management & Control

Highly effective Program Manager with 15 years experience successfully implementing multi-million $ capital investment projects with GE / Toshiba for industrial customers worldwide. PMP 2006, MBA 2003 plus Engineering degree. Holds P&L responsibility for $25 million of global turnkey projects.

Safety Management

QUALIFICATIONS SUMMARY: Eleven years experience in Generator mechanical, electrical troubleshooting, and repair. Six years experience as quality control inspector for the United States Navy. I have experience with all types of generators from 2k to 635k both civil and military. I can read all s

Architect and Interior Designer

Over six years of extensive experience in Planning of a large Infrastructure & Commercial Development Project

HVAC Engineer,Project Engineer,Mechanical Engineer,Commissioning

Extensive diverse EPC Management, Operations, Consulting - domestic & world=wide, all disciplines Refinery, Petrochem, Chemical and Pharm. projects, operations and plant trouble shooting with associates power and infrastructure.

Capable of handling independently & professionally all finance and accounting functions of any manufacturing organization. Have expert knowledge on requirement planning of ERP software and any other business software.

Quality Assurance, Quality Control, Construction, Project, ISO 9001, System Development, Implement, Audit, Corrective & preventive actions, Continuous improvement, Oil & Gas, power & petrochemical industries

Area of expertise is ranging from Preliminary and Details Design, Construction

Over 15 years exp in construction company as Technical office Engineer, Document controller, Quantity Surveyor etc

A well experienced senior level QA/QC Engineer, Welding/Coating inspector

truck driver,heavy truck driver

Five years experiance in this civil engineering .

Multi-talented/Multitasker - Facility / Safety Management, Hazardous materials Paramedic, trainer, Construction/General Industry background, Environmental compliance

currently located in Milan, Italy. I have all documents to work here in Italy. I am looking for job related to CAD, MICROSTATION, FRAMEWORKS. I have good experience in CIVIL RCC, STEEL, Underground drafting & detailing. I have good experience in 3D Modelling using PDS, FRAMEWORKS.

Possess ten (10) years of experience in design of various civil engineering facilities providing shelter and access to fellow humans in Pakistan, Yemen and Oman.

Thirteen Year of experience in the construction and project management of oil and gas projects.

Interested in Construction jobs.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 [ 21 ] 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out