Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #69666 next resume »»
CONTACT INFORMATION:
View contact information...

ACADEMICAL FORMATION

Degree: Civil Engineering (conclusion 1996) at FAAP (Fundação Armando Álvares Penteado)
Post graduation in Environmental Engineering (2002)
Civil Eng license (CREA): 5060798606/D

OBJECTIVE:

PROFESSIONAL OBJECTIVE

Continue acting in pipeline engineering construction and assembly independent of the site job and challenging new experiences.

WORK EXPERIENCE:
PROFESSIONAL BACKGROUND

I have been active for more than 13 years in the pipeline construction and assembling. Summarized below some of the most important developments; I have worked in:

* CGA – AMAZONIAN PIPELINE JV
Post: Senior Production Engineer. From 04/2007 up to the present date

Main activities developed in the project: Coari – Manaus Pipeline Spread B2.

Responsible for the construction and assembly of the pipeline in the Amazon jungle Coari - Manaus - Ø 20" Spread B2 Caapiranga - Anamã, totalizing 661 kms of pipelines installed. Also responsible for the logistics of all activities related to the field of production including coordination of heavy watercourse transport but also the formation of teams and other activities related to the construction and assembly of a pipeline. Parallel responsible also for the construction and assembly of branches of Ø 6"and also of Stations of Bombardment of gas and City Gates to the long one of the line.

SINOPEC INTERNATIONAL PETROLEUM SERVICE OF BRAZIL LTDA.
Post: Construction and Assembly Coordinator From 07/2006 to 04/2007.

Main activities developed in the project: GASENE (Pipeline Southeast / Northeast).

Responsible for the construction and assembly of the pipeline GASCAV ( Cabiúnas-Victoria Terminal) Ø28" being a total of 300 kms of pipelines installed. Responsible also for the implementation of all activities related to the field of production including up to the formation of teams and other activities involved in the construction and assembly of a pipeline.
Implementation of welding school Inner-shield type (half-automatic weld) and too much activities related to the construction and assembly of a gas-line of great transport.

* NEDL CONSTRUÇÕES DE DUTOS DO NORDESTE LTDA.
Post: Senior Production Engineer From 04/2005 to 07/2006.
In charge of Nordeste Gas Network II (Bahia, Sergipe, Alagoas), Catú-Pilar Ø 26"
– Sub-section Carmópolis-Pilar, of 176 kms pipelines installed.
Simultaneous field coordination of two pipe distribution teams, three special constructions teams (including hydrostatic tests and tie-ins), three welding teams, three lowering-in teams, and Right-of-way opening, launching of corrosion tests, valve areas, valve assembling, compression stations (including the assembling process), as well as the follow-up of the HDD work under the São Francisco River.

* TECHINT ENGENHARIA S/A
Post: Field Engineer. From 09/1998 to11/2000

Responsible for the execution of the construction works and assembly of the Bolivia-Brazil Gas Pipeline at stretches 5, 6 and 7 as well as, at stretches 10 and 11 (sub-stretches E and F) - PETROBRÁS/SEGEN/GASBOL project, totaling 912 km of pipeline installed.
Main developed activities:
Coordination of specialized team in the execution of the drainage operation (Removal of the water inserted into the pipelines for the hydrostatic test) and the passage of the "Geometric Pig" (intelligent Vehicle for internal inspection of pipelines to verify the thickness, ovalties and dents) in a total of 546 km of extension.
Responsible for the assembly of block valves along the gas pipeline in 2 stretches and also of the right of way restoration phase (Restoration of the right of way as the pre-existent conditions in the search of the environmental quality of the job).
Responsible also for the execution dam works; soil cement drains; planting of grama grass (hydro-seedling); execution of level curves as well as fish spines, signaling of the main right of way and obtaining of anything consists.
Responsible for the civil implantation and assembly of the Stations of Compression of São Carlos, Penápolis and Rio Verde.

EDUCATION & CERTIFICATION:
LANGUAGES

Spanish: advance reading, conversation and writing.
English: advance reading, conversation and writing.
Chinese: learning

COMPUTER SCIENCES

User of most common applications & autocad

SEMINÁRIES AND EXTERNAL COURSES

* English course at New York University (May to October 2000)
* Rationalizing in the Construction of Pipelines and Offshore structures
* Specific course on Natural Gas
* Building Hydraulic Installations
* Course in the Installation and conversion of equipment to Natural Gas

View contact information...
«« previous resume next resume »»
Search Results (Resumes 1701 to 1750 of 4321)Go to Search Parameters...
Brief Description
CATIA 5 , ABAQUS, and Hydraulic system
Geologist, supervision on drilling and grouting
Preparation of plan, profile, detailed engineering drawing using AutoCAD, AutoCIVIL,Word and Excel etc including Construction supervision for road and bridge works.
Professional Engineer with 8 years experience in construction/ project management; mainly field engineering, scheduling, equipment procurement, project control, contract administration, constructability review and on site project coordination for EPC projects with industrial contractors.
Profile: • Multilingual French MSc. student in mechanical design and production. Able to work on own initiative or as part of a team. • Seeking a full time position in the field of mechanical design and willing to be relocated in USA.
I would like to continue working in the safety and environmental field. My stronger attributes are in the safety field, but I do have several years experience dealing with environmental issues.
A proven professional with the ability to grasp new tasks quickly and efficiently.
Seeking a career with a company, that will utilize my skills. I have been with Nooter for 13 years and feel it is time to move on to a company that is looking for a fresh mind. I feel that being a 33 year old Project Manager on a $36 project has to say something about myself and my work performance.
To obtain employment in the construction industry.
Experience is most heavily focused on concrete from construction and placement in several different types of structures. I am currently finishing a University of Washington program in Construction Management
I am an experienced Geotechnical Engineer with a five-year track record in the field of Geotechnical investigations for various projects like Railways, Express Highways, Power Projects, Transmission lines, Airports, Marine Structures etc.
I am seeking a position as an Electrical Project Manager/ Estimator
A Fresh Graduate of Bachelor’s Degree in Civil Engineering (Hons). from Universiti Teknologi MARA Pulau Pinang.,
Instrumentation engineer have complite my 4-yr degree in the year 2007. and upgread myself after compliting my degree in automation
Employed by Centex Homes in the Land Acquisition department. Established a track record for securing quality land development opportunities for Centex. Participated in more than $40 million in development land transaction closings since 2004. Consistently delivered great sites.
Heavy Equipment Operator/ Oilfield Construction Foreman, offering more than 8 Years Experience in Oilfield and General Construction. My specific proficiencies include Oilfield and General Construction using Heavy Equipment, Project Management, and have a recognized committment to Safe Work Practice
• Project Management, Financial Control Budgets and Planning, Petroleum Economics, Oil sands, Heavy Oil, Geology, Advanced Petroleum Technology,
Operating System: Windows 95, 98, XP & 2000, Computer Literate with Knowledge of MS-Office 2000, Knowledge of AutoCAD Rel. 14, 2000, 2002 & 2007
Tasks-oriented, analytical professional civil engineer with MBA. Well diversified background in civil & structural engineering consultancy, property development and construction with solid experience in ISO9001 QMS.
Results oriented International Project Manager (IPM) with extensive development experience and strong concentrations in the Telecommunication (s/w and h/w development), Electronic, Automotive and Construction Industries.
I am a planning engineer, having good working experience in primavera 3.1 and microsoft project. I am a civil engineering graduate and took post graduate diploma in Advanced Construction Management from NICMAR, Pune
Civil Engineering graduate with 5 + years experience in sales of specific products like Geo-Synthetics and Gabions
I have a Diploma in Mechanical and 12 Yrs Experience in QC related jobs like Oil, Gas, Power, Refinery Constructions. In addition to I have ASNT RT,UT,MT,PT Level-11 and CSWIP 3.1 Welidng Inspector certificate from TWI UK.
Civil Engineer
HSE professional,Hands on 10yrs experience in process and construction projects
IT Specialist with emphasis on Project Management, Technical Services and International Project Coordination
MBA, 100% Spanish and English.
Executive management, business development, supply chain, IT, embeded system
Retired diesel mechanic, safety rep. for field, carpenter - 23 years of service to Shell Offshore Inc.
Design of Horizontal, Vertical Road alignments, at grade intersections, at grade separators and highway components as per site conditions in line with the IRC, ASHOO,BIS and international standards, using MOSS (MX Road) & Auto cad Software’s.
Experience in Construction Management, currently employed as Estimator/Planner. Underground Utilities.
Around 9 years of work experience in EPC Project Planning, Monitoring and Control functions. Possess a strong working knowledge of several Scheduling software applications including PRIMAVERA P3 3.1, MS PROJECT, SURETRAK, EXCEL, POWER POINT etc.
Civil Engineer experienced in buildings, Roads and Power projects.
BS Mechanical Engineer with 7 years experience, familiar with ASME, API, ANSI, TEMA, etc. specifications and industry standards in mining, petro-chem and power plants. Strong background in Piping. Single, willing to relocate, fluent in Spanish & understand Bahasa Indonesian.
Post Applied Document Controller
1- ) Possessing the knowledge of both Construction & Maintenance Planning.2-)Cost Estimation , Analyzing & Controlling ( Cost Tracking , Cost Variance – CV , Cost reports ) ( using different tabular & Graphical forms ) 3-) Resource Planning & Schedulling using Software aid like Prima Vera & M.S.P
Continue acting in pipeline engineering construction and assembly independent of the site job and challenging new experiences.
I have gained knowledge in the areas of construction and project management.I have had considerable experience with the use of spreadsheets and word processing programs.I am a motivated learner and I can work well in in a team.I consider my communication skills,both written and oral of high quality
Mechanical piping supervisor
Excavation civil earthworks operator foreman
Plc, scada & dcs programmer.
Planning, Primavera, scheduling
Diploma In Instrumentation Engineering In Aug 1988 (3 Years Duration) +Amie Eqvt To B.E
DCS Engineer With Yokogawa CS3000 experience
An effective engineer possessing good communication skills, combined with proven technical and organizational abilities. Education, qualifications and experience gained through significant design applications and management positions performed in the US and the Middle East.
Project Leadership: project development, estimation, engineering, installation, field start-up and commissioning.
Mechanical engineer striving for excellence and challenges
Microsoft enterprises systems, Great Plain ERP, SharePoint services SQL Server 7\2K\2k5, Exchange Server 2k\2k4, ISA Server 2k\2k4, IIS 6.0, Manufacturing (Planning ERP, Execution MES, SCADA, Process Controlling) Active Directory, DNS, Windows Servers, Desktop, POS, PDA NT\2K\2k3\XP\Vista VBA\Access
Obtained Greenbelt Certification from DaimlerChrysler and Black Belt Steering Committee for solving a complex rear door window noise issue on Dodge Durango by using Shainin methodology.
Highly organized, self-motivated individual with experience in the Automotive Electronic Equipments maintenance, repair and troubleshooting, Computer and Data/Voice Communication industry.
First   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   [ 35 ]   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2008 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com