Resume - Over thirty-five years experience in electric power utility equipment, SCADA, me...

Misco Jobs

Resume #69785

CONTACT INFORMATION:
View contact information...

OVERVIEW OF EXPERIENCE

Background & Experience:
* apparatus (breakers, disconnects, arrestors, station service, DC systems, capacitors, power & auto plus GSU transformers up to 500kV and 450MVA;
* protective relaying (IED to multivendor IEC61850 & DNP3.0 standards);
* SCADA (EPCOR Master and RTU) including NERC/CIP knowledge;
* telecommunications (substation LAN, fibre, PLC, microwave, trunking radio, satellite, telephony, marine & Telehealth);
* energy management/metering (AMR) system development & implementation;
* Telecommunications & SCADA for 1500km oil pipeline engineering project
* project Management and contract experience along with detailed design is a strong area
* mentoring of junior engineers (EIT) and technologists/technicians is always of keen interest
* Incorporated consulting company, Aurissa Enterprise Inc., registered in Alberta, Canada.

EDUCATION & AFFILIATIONS

* Certificate, Bournemouth College, Hampshire, England
* Bachelor of Applied Science (Honours) University of Waterloo, Waterloo, Ontario
* P. Eng., APEGGA, Association of Professional Engineers, Geologists and Geophysicists of Alberta
* P. Eng. APEY, Association of Professional Engineers of Yukon #1399 (and Council Director)

EXPERTISE

* Electrical Substation System Design Development
* Substation Transformer & Breaker Apparatus: Design, Specification & Documentation
* Substation Network LAN Communication design including IEC 61850
* Substation HV Power Cables & Bus Duct: Design, Specification & Documentation
* Generation, Substation & Transmission MultiVendor Protective Relay Systems
* SCADA Electric Utility & Oil Pipeline Systems
* Automatic Meter Reading AMR Systems and Electrical Metering

* Telecommunications Strategic Planning
* Fiber Optic Transmission Systems & Studies/ PON's
* PLC (Power Line Carrier) implementation
* Microwave (Analogue & Digital) Systems
* VHF/UHF Data/Voice
* Aeronautical and Marine Radio Systems
* Cellular & Mobile trunking Radio Studies
* PABX Telephony Integration
* Solar Power UPS Engineering

* Project Management (PM)
* Supervising, Hiring, Mentoring Technicians, Technologists and Engineers
* Business Process Re-engineering (BPR)
* Industrial Engineering (IE) Studies

EMPLOYMENT HISTORY

2006 – 2008 Stantec Consulting, Senior Electrical Engineer (Apparatus plus P&C)
2005 – 2006 Orbis Field Engineering Services Ltd., Senior Electrical Engineer
2004 – 2005 Sinai Engineering Ltd., Relay & Communication Substation Engineer
2003 – 2004 Yukon Energy Corporation, Electrical Engineer & Supervisor
2000 – 2003 Dorward Engineering Services Ltd., Project Engineer
1998 – 2000 ACM Automation Inc./OGP Inc., Telecom & SCADA Engineer
1997 – 1998 EPCOR Utilities Inc., Telecommunications Architect Manager
1996 – 1997 EPCOR Utilities Inc., Customer Services Network Project Manager
1986 - 1996 Edmonton Power, Protection and SCADA Manager/Director
1984 - 1986 Edmonton Power, Senior Protection & Telecontrol (P&C) Engineer
1975 – 1984 Edmonton Power, Generation Protection Engineer
1971 – 1975 Northern Canada Power Commission Apparatus Electrical Engineer

SYNOPSIS OF EXPERIENCE

INDUSTRIAL & UTILITIES

POWER-SENIOR ELECTRICAL ENGINEER
STANTEC CONSULTING (Edmonton, Alberta)
EDMONTON, ALBERTA

* Lead Design Senior Electrical Engineer for substations, apparatus, telecommunications and SCADA
* Mentor, lead and coach a group of technicians and engineers reporting to engineering manager; participate in employee and contractor selection, interviewing and hiring
* Responsible for substation philosophy by preparation of a SDD (system design document) using modern substation techniques, researching alternatives, utilizing state of the art IEC 61850 communications with cost considerations
* Interface as specialized consultant between clients engineering group and substation design group with justifications of specialized design alternatives
* Coordinate with specialized consultants and client in preparation of specifications for a 10.3km 240kV underground 1000A three single phase cables between key and outlying substation using state of the art temperature ('Raman effect') monitoring for every three meters using multistranded multimode fibre optic sensing and communications for each conductor
* Supply DBM, detailed budgetary costing for installation, engineering, change orders, design scope, building and other electrical equipment
* Prepare and review SLD (single line diagram) showing buswork, protection, control, metering, intertripping and inter-intra substation communications for two main voltage levels
* Responsible for detailed conceptual design, technical specifications, contractor pre-qualification, and bid evaluation for all apparatus in substation including:
* GIS-SF6 Gas Insulated HV switchgear to 240kV
* AIS-Air Insulated HV switchgear and equipment such as CVT's, PT's, disconnects, breakers, layouts, buswork, protection & telecontrol, DC and AC station service design
* High current capacity buswork rated 3000 and 4000 amps for 72kV using IBP (insulated bus pipe), XLPE (cross linked polyethylene), GIS buswork and air insulated three phase and single phase bus duct
* Provided engineering and support for the design, specification, factory drawings and documentation of the main autotransformer comprising 325/375/450MVA rating at 240-72kV OLTC (on load tap changer) including Hydran (dissolved gas & moisture analysis online) and network communications through Beckwith using Qualitrol and other modern communicating IED (intelligent electronic device) sensors
* Provided engineering and support for the design, specification and evaluations for CT's, PT's, CVT's, station service transformers
* Provided engineering and support for the design, specification and evaluation for MOD's, (motorized disconnects) and non-MOD's for ring bus design breaker isolation
* Provided engineering and support for the design, specification and evaluation for dead tank low temperature (-50*C) 260kV and 72kV breakers
* Review equipment layouts, lightning spires, concrete transformer equipment pad and piles, fencing and grounding details with transformer oil containment to regulations
* Design and coordinate requirements for indoor AC and DC panelboards plus control cabling selection and routing including marshalling junction boxes and CT and CVT interfaces
* Review grounding studies
* Prepare SCADA and DFR with SOE with communications and telecommunications design philosophy
* Coordinate building specifications including HVAC with civil engineering on building parameters
* Review and prepare all specifications and evaluate protective relaying and philosophy for substation including retrofits and upgrading at adjacent substations connected by oil filled pipe type 72kV cables
* Design, prepare, issue and evaluate station service supplies for UPS, DC system and battery bank sizing including emergency power
* Guide the design of task lighting and substation building lighting
* Prepare and review DC, AC and transformer schematics, panel layouts, protective relaying DC schematics, telecontrol schematics
* Responsible for conceptual design, technical specifications, contractor pre-qualification, and bid evaluation for all apparatus in substation including:
* Review of GIS-SF6 Gas Insulated HV switchgear to 240kV
* AIS-Air Insulated HV switchgear and equipment such as CVT's, PT's, disconnects, breakers, layouts, buswork, protection & telecontrol, DC and AC station service design
* High current capacity buswork rated 3000 and 4000 amps for 72kV using IBP (insulated bus pipe), XLPE (cross linked polyethylene), GIS buswork and air insulated three phase and single phase bus duct

POWER-SENIOR PROJECT AND ELECTRICAL ENGINEER
ORBIS FIELD ENGINEERING INC. (Edmonton, Alberta)

* Coordinate technicians and engineers and report to CEO of company
* Interface as technical consultant between client and design group with consideration for operations and maintenance
* Supply detailed budgetary costing for all types of electrical equipment
* Provide detailed cost estimates for $50Million expansion based on present Diavik mine growth electrical power requirements based on actual site metering data
* Responsible for conceptual design, technical specifications, site inspection for Diavik Diamond mine for all apparatus in a new substation
* Prepare and update SLD (single line diagram) showing buswork, protection, control and metering
* Prepare business development plans and meet with existing and prospective clients ranging from $25k to $300k engineering manpower proposals
* Review and prepare documentation for multiunit diesels at Ft. Simpson powerhouse in the Northwest Territories for communication and plant automation system
* Review and revise documentation and evaluate protective relaying for substation
* Review DC, AC and three line transformer schematics and panel layouts
* Prepare a detailed report on actions required to upgrade existing power plant to a safe and reliable operating system
* Prepare detailed specifications for a 72kV substation expansion for a 8Mvar capacitor bank expansion with the addition of a new 72kV outdoor circuit breaker with associated protective relaying and layout
* Prepare and review DC, AC and capacitor and breaker schematics, panel layouts, protective relaying DC schematics while extending bus protection and power (CT, PT and control) cabling
* Attend Doble Engineering annual conference on power apparatus, Western Protective Relay conference and Doble "Life of a Power Transformer" seminar

POWER-ELECTRICAL ENGINEER
TRANSALTA ENERGY CORP. / SINAI INC. (Edmonton, Alberta)

* Substation and Apparatus Engineer
* Senior Telecommunications and SCADA Engineer
* Manage group of technicians and engineers and interface to project manager
* Supply budgetary costing for equipment

ATCO POWER GENERATION (for Battle River, Alberta)

* Analyze retrofitting of 300 MW coal fired generators with modern digital protection compared to existing protection

DIAVIK DIAMOND MINE (Lac de Gras, NWT)

* Analyze addition of load flow and requirements for existing power plant for expanded underground and overhead mining
* Adding five 2.2MW diesel generators, power plant, switchgear, Delta V SCADA and fuel facilities using digital protection estimated at $70Million overall
* Liaison between Vancouver, BC; London, UK Rio Tinto; Yellowknife, NWT and Edmonton for various vendors and end users of equipment
* Prepare as built documentation for Ft. Simpson power plant and recommend improved operations and safety requirements
* Review automation, grounding and protection for Ft. Simpson powerhouse including PLC automation of entire power plant facility

DORWARD ENGINEERING SERVICES (Yukon and Northwest Territories):

Project Manager for $25 Million Yukon Territorial Government project to upgrade analog microwave to digital microwave including implementation of fibre optic system including telephony, high speed Internet, xDSL, presentations & training of First Nations
* Site supervision and inspection of Yukon Energy Corporation (YEC) Mayo hydro, switchyard and Dawson substations for a 72kV intertie transmission line

EPCOR (Edmonton, Alberta):

* Participated in the Power Pool of Alberta System Coordination AESO Technical Committee.
* Project manager for automatic meter reading pilot project using existing telco phone lines in conjunction with gas, electricity and water investigation improvement project.
* Project engineer for coordinated transmission and sub transmission protective relaying upgrades, replacements and substation interfacing.
* Vice Chairman CEA (Canadian Electrical Association) for electricity metering equipment and systems including legal requirements and protocol development standards for electronic metering
* Conducted technical presentations on protective relaying, digital fault recorders and sequence of event analysis systems.
* Member of CEA Protection Section participation as presenter of 72KV Pipe Type Cable Protection using power line carrier and Phase Modulation Techniques for communications
* Energy Telecommunication Association of Canada team member for optimizing data and voice network
* Transmission, Distribution and Substation protective relaying engineer designing SLD's for AIS and GIS terminals and substations with group of engineers, technicians and draftsman (several substations designed and extended)
* Expert Witness for 50MVA 260-13.8kV power transformer failure and forensic analyst for the protective relaying representing the Insurance company for EPCOR
* Generation Protection Engineer for designing, specifying, testing in Sweden and commissioning all protective relaying for Units 3 and 4 at the Clover Bar power plant using second generation solid state relaying
* Protection and Telecontrol Manager including Energy Metering Capital and Operating Budget Analyst

NORTHERN CANADA POWER COMMISSION (Ottawa, Ontario for NCPC):

* Electrical design engineer for diesel electric power plants, automation and remote control of sites
* Metal clad switchgear/ protection equipment
* Load forecasting and fault studies with field construction/ commissioning over five years

PROJECT EXPERIENCE

INDUSTRIAL-OIL AND GAS PIPELINE

ACM AUTOMATION INC./OGP INC. (Calgary, Alberta & Buenos Aires, Argentina and Sudan, Africa)

* Sr. Telecom & SCADA Engineer for 250,000 BPD (barrels per day) pipeline
* Prepare, issue and evaluate all telecommunications for Sudan, Africa pipeline including onsite testing and commissioning and factory acceptance testing covering:
* Fibre optic cable (1500km)
* Trunking radio system including towers and vehicle radio with handheld units
* Satellite backup communications
* PABX telephony communications between main site and all pump stations
* Marine radio communications
* Construction power communications using satellite radios
* Prepare, issue and evaluate all telecommunications for Sudan, Africa pipeline including onsite testing and commissioning and factory acceptance testing covering SCADA system
* RTU and PLC specification and review for SCADA system
* Master Station software and hardware based on PC platform for pipeline control, leak detection, pump station control, security and Internet access
* Supervision and mentoring of professional engineers and EIT (Engineers in Training) and technical staff on an ongoing basis

TELECOMMUNICATIONS

EPCOR (Edmonton, Alberta)

* Project Pilot Manager, Automation and Automatic Meter Reading Trial Telecommunication Specialist
* Implemented a pilot project in two areas of the City of Edmonton for remote electrical, water and partial gas metering (copartner with NW Utilities) consolidation
* CSN (Customer Services Network) Project Manager for an integrated revenue metering & telecommunication system via CATV & fiber infrastructure projects with trunking mobile and cellular utilization analysis recommendations.
* Conduct business assessment and survey to analyze projected revenues and viability of entire system.
* Study and investigate Fibre optic cable deployment between City of Edmonton and Genesee power plant at estimated cost of $1 Million in 1996
* Mobile Radio and Data System (1995-1998) – EPIRS or Edmonton Power Integrated Radio System
* Studied and recommended optimum solutions to consolidate all wireless communications for utility electric and water
* Investigated and prepared specifications and received quotes from four major vendors consisting of Motorola, Ericsson, DataRadio and TAIT Mobile Radio ranging from $1.5 million to $3.5 million.
* Conventional and trucked radio were studied.
* Studied and experimented with PCS cellular communications. TDMA cellular use and CDMA communications for both data and upcoming digital alternatives using public systems.
* Studied public radio systems of Telus Mobility (WATERS, CDPD and digital cellular) and Rogers/Cantel/AT&T using Mobitext data technologies
* Staffing levels for this project were projected at 3-5 engineering personnel and vendor support plus use of a consultant, Deloitte-Touche, Vancouver for radio mapping and project management under my jurisdiction
* SONET Single Mode Fibre Optics System (1990-1997)
* The SONET (synchronous optical network) system comprises an OC-1 (50-megabit) JungleMux system from Nortel, Vancouver operating between 11 'panel' device locations carrying administrative/accounting and engineering process control traffic.
* This system required the engineering services of 2 to 3 full time staff plus field construction (fibre optic cable pulling and panel installation) personnel or a total of 5 staff full time.
* There is network-monitoring software at the key control centre location running over Pirelli and Phillips single mode fibre optic cable.

PROJECT EXPERIENCE

PROJECT MANAGER

LIFE CYCLE MANAGEMENT SYSTEMS SCADA SYSTEMS

EPCOR (Edmonton, Alberta)

* Project manager for a replacement electrical distribution SCADA system.
* Has successfully managed individual projects of CAD$12,000,000 in SCADA, multimillion annual budgets in protective relaying with added responsibility for electric revenue and non-revenue metering, annual capital budgets exceeding CAD$3,000,000
* Prepared strategic objectives in telecommunications infrastructure covering point-point and mobile wireless (both voice and data) systems and assets exceeding USD$21,000,000.
* Completed five-year plans, e.g. metering systems covering CAD$90,000,000 five-year budget.
* EMS and SCADA Project – Energy Management Systems & Supervisory Controls for third generation consolidated SCADA system-replacement third generation system from VALMET
* EMS/SCADA Budget CAD$5 Million-second generation system
* System size of 20,000 points including instantaneous and revenue metering; breaker control for group trip, trip, close, reclose resetting, power transformer tap changer control, 1 millisecond sequence of event recording, general setpoint alarming, analog measurements, fault recorder input, teleprotection alarms, three state devices, underfrequency load shedding control, and SF6 substation annunciation. Remote consoles for LRT and three power plants plus addition of AIS interface for possible later integration into ICCP communications
* Vendors were Valmet, Matrikon, Hathaway and DEC (Compaq)
* $2 Million Hardware and Software contract awarded to Valmet in Calgary, Alberta in late 1995 based on OaySys DEC (Digital Equipment) Alpha Workstations product line after intense negotiations between ABB (Asea Brown Boveri) who were the incumbent SCADA system in place.
* Other prequalified vendors included Landis & Gyr and Harris Systems Inc.
* Original budgeted price to Valmet included only the MTU hardware site equipment and software to connect to 50 RTU's (remote terminal units).
* A dual redundant Protocol translation PC Workstation to translate the Indactic 33 protocol to the Valmet OaySys operating system was implemented.
* The project was 'kicked off' on September 21, 1992 and Mr. Cooke was the project manager until resigning in April 1996 to the Improvement Team to consolidate EPCOR telecommunications and Automatic Meter Reading project estimated at $90,000,000.
* Staff included 4 senior personnel, drafting technicians from engineering (7 staff not all full time) and six field personnel plus control operators plus an average of four consultants part time.
* Total staff throughout organization approx. 17 impacted on the SCADA Team.
* Completed initial LRT and DC Transit SCADA system for the City of Edmonton Transportation system for several portals

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1901 to 1950 of 4371)

Go to Search Parameters...

Brief Description

Qualified and well experienced Piping Engineer; availing in excess of 25 years of experience in the full spectrum of engineering, design, detailing, fabrication, erection, retrofitting, testing, QC, commissioning, maintenance and demolition of Process/Power Plant and Piping.

I have 23 years of experience in a combination of skills including electrical troubleshooting, installations and repairs, PLC programming (AB, GE, Siemens) and installations, HMI programming and installations, Supervision and Project Management.

PRODUCTION PLANNER,PRODUCTION CONTROL 25+YEARS EXPERIENCE

Strategic marketing, business development and executive search professional with strong record of implementing sales and strategic plans that support corporate and financial goals. An effective executive search director & professional.

A highly talented and accomplished Electrical Design Specialist with skills and experience in Electrical and Protection systems for EHV/HV substations (AIS/GIS) and MV Power Distribution systems.

* Exceptionally qualified Professional with more than twenty years of experience as a Field Engineer in the industrial and power industry

Accomplished technical and managerial career qualified by 24 years of measurable achievements in the construction and mining industries. Highly skilled in identifying, evaluating and negotiating joint venture and other international business opportunities with government officials, the private sect

Structural Design Engineer with more than three years of experience in the field of design of bridges, underpasses, buildings and other highway related structures.

Bachelor of Civil Engineering from Jawaharlal

Any Job Opportunity in Contract Administration and Quantity Surveying

I would like to associate myself with an organization that provides ample scope to hone my skills and turn into versatile architect.

A self motivated metallurgist who is presently working with Ispat Metallics India Ltd (Ispat Group) as Engineer production, has wide range of experience in commissioning and Operations including excellent exposure to Level 2 models, wishing to pursue his career in an environment where his technical

Structural Engineer with 2.5 year work experience and Master Degree

Filing all documents and maintaining.

Diploma Computers

Quality and Welding engineer with rich experience over 12 years in oil and gas/petrochemical sector for most of years in offshore, I am looking for challenging position in international multi-cultural environment in QA/QC field.

To be part and considered to be an asset of a company where I can render my knowledge, skills, talents and expertise productively and effectively.

DCS/ESD - DESIGN,FAT,SAT,POWER_UP ,COMMISSIONING,HOT/COLD CUT OVER & MAINTENACNE

Piping and Pipe Stress Engineer with wide range of experience in industries Petroleum Processing, Power, Chemicals, Petrochemicals Polymers and Steel Production. Able to work on own initiative and as part of a team. Proven leadership skills involving managing, developing and motivating teams

Over thirty-five years experience in electric power utility equipment, SCADA, metering, telecommunications plus project management and international engineering from South America, Europe and Africa.

Journeyman Electrician with experience in commercial and industrial

I can effectively run pretty much anything with a Caterpillar logo except for a bulldozer... (sorry... haven't had the chance to learn just yet.) Otherwise, very skilled, capable and eager.

SKILLED / EXPERIENCED I & C TECHNICIAN, SEEK APPROPRIATE OPENINGS AS LEAD TECHNICIAN/SUPERVISOR

Project engineer-Mechanical, HVAC, Utility equipmets-Operation and maintenance

BE in Computer Engineerng from uet taxila paksitan

Structural Steel & RCC Designs in the fields of Oil & gas, Power, Steel and Aluminum Plants and other Industrial Structures

Hysis, Aspen plus, PRO-II, HTFS, HTRI, Flare net, Auto-Cad & Microstation and APIs, ASME, IS, Ghost Std.

I have followed the four-year degree program leading to the B.Sc Engineering Degree specializing in the field of Civil Engineering, and have obtained the B.Sc Degree with Second Class Honors (Lower Division) Pass.

Thirteen years of total experience in Project Engineering, Tendering, Cost Control, Material Procurement, Execution and Supervision of heavy civil and marine construction of seawater power and desalination plants and wharfs/jetties/local fuel oil and lng/ngl terminals.

Experience of 16+ years of rich experience with EPC contracting company in Piping fabrication, erection, hydro testing and pre commissioning activities for Refineries, Oil & Gas plants/facilities, Paper Mill, Water Treatment Plants, Effluent Treatment Plants and Power Plants

Process Engineer / Commissioning Manager

10 Years Experience in Lifting Equipmet Inspection, Maintenance,Trouble shooting and Repairs. Saudi Aramco certified Lifting Equipment Inspector.Diploma In Mechanical Engineering (3Years). ASNT Level II in PT,MT,RT and UT.

I am well proficient in AutoCAD, 3ds Max and Photoshop

BSc CEng with over 6 years of experience in huge excavations & earting works, specialized in earthquake retrofitting of industrial, public buildings,Thermal PP,Pipe Line projects.

A self-motivated, highly disciplined and hard working graduate electrical engineer with over 26 years of extensive experience in various disciplines such as Specifications, Tendering, Design & Engineering, Construction, Project Management and O & M.

20+ years in Control Systems Engineering/Design. Experienced Intools user.

I have 12 years experience in Installation, Commissioning & Operation of HVAC and Plumbing systems of any capacity

Free ! YOUNG POTENTIAL in FINANCE & ADMINISTRATION

An Engineer + MBA from Mumbai University and having good experience in Construction Industry

To meet the needs of your company by incorporating project management, estimating, and scheduling experience, with a diverse project background.

Construction Manager Ranging from Field Design, Construction Management, Engineering and Project Engineering Management of Contractors and Inspection. Results-orientated with an ability to stimulate work, reduce costs and

Proven Project Manager who excels in communication and leadership. Experience in commercial and residential construction. Understands the value of ahead of schedule and under budget.

Emad Toubar is currently employed by Saudi Consolidated Engineering, SA as a senior mechanical piping engineer, where he provides engineering design services for Saudi ARAMCO and other major petroleum companies in Saudi Arabia including design of piping systems and petroleum pipelines for new wells.

Electrical & Instrument Designer

Mechanical draughtman

A professional Electrical Engineer with skills and expertise in project, engineering and maintenance management spanning 20 years hands-on and managerial experience in a Petrochemicals Company and an EPC company. Seeking a rewarding position as a Project Manager/Leader/Sr. Project Engineer

I am a National Construction Safety Officer and am currently a HSE Coordinator for a large corporation.

am working as an Sr. CAD Engineer, presently working with Aker Kvaerner powergas Ltd at Mumbai. I have been till date worked with Major Pharma, Semiconducters & Engineering Design Consultants firms and Construction Companies at Middle East (8-year) & Bombay (10-years) for world wide various project

21 years post graduate experience in the Construction Industry with 7 years exposure to Engineering, Procurement & Construction (EPC) activities in the oil & gas industry both as the client/operator and EPC Contractor & 7 years in the Project Management Team / Consultancy (PMT / PMC) role

Structural Engineer +3 Years EXP.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 [ 39 ] 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out