Resume - Control and Instrumentation Engineer

Misco Jobs

Resume #70554

CONTACT INFORMATION:
View contact information...

Years of Experience: Ten Years

Qualifications Summary

Power plant control and instrumentation Engineer experienced with strong organizational, technical, and interpersonal skills. Trustworthy, ethical and discreet, committed to superior customer service.

Capabilities include:
* Good team-working ability
* Result-oriented problem solving ability
* Orientation towards customer satisfaction

Career Summary

* Interaction with the Customer, Consultants and contractors for getting the job done at site.
* Exposure to Ovation System, Max DNA, Mark V, Mark IV, Woodward Governor and Procontrol system.
* Working experience in Combined Cycle Power Plant projects
* Conducting Factory Acceptance Test for integrated control systems
* Conducting Performance Guarantee Test for the Combined Cycle Power Plants.
* Steam Turbine system Engineering from the P&ID to the control logics.

Job Profile

* Commissioning of Gas Turbines, Steam Turbines, HRSG and Balance of Plant controls.
* Configuring interface between DCS and other controllers through Modbus protocol like Max DNA to Mark V and Bently Nevada.
* Software testing (with customer at site).
* Conducting Factory Acceptance Test using Virtual controllers.
* Ensuring timely completion of the project.
* Meeting the customer requirements and handing over the complete system after making necessary protocols.

Software knowledge:

1. Basic programming in C, Fortran and Basic.

Employment

Emerson Process Management:

From September 2006 onwards with Emerson Process Management, New Delhi in the Control Design and Tuning Department as a Deputy Manager.

The job responsibilities include:
* Sketching Control Logics and Graphics for Power Plants.
* Tuning of auto loops for Power Plants.
* Providing technical support to Proposal team.
* Conducting Factory Acceptance Test.

1. Presently responsible for sketching and implementation of logics for 240 MW Coal Fired Power Plant – Nueva Ventanas, Chile (Ovation Control System)
2. Migrated logics for two Westinghouse Gas Turbine units for Pesanggaran at Indonesia, Bali.
3. Migrated logics for three Westinghouse Gas Turbine units for Spectrum Power Generation, India.
4. Responsible for migration of Gas Turbine Logics, Heat Recovery Steam Generator and BOP Logics from WDPF to Ovation system.
5. Sketching of simulation logics for Gas Turbine, Heat Recovery Steam Generator and Balance of Plant for testing the entire system using virtual controllers.
6. Conducted software FAT using virtual controllers for Gas Turbine, Heat Recovery Steam Generators and Balance of Plants.

Tools used for building the logics:

1. Ovation control builder along with Autocad.

Alstom Projects India Limited:

From January 2006 to September 2007 worked in Alstom Projects India Limited, New Delhi as Lead Engineer in Turbo Machinery Group – Controls and Instrumentation.

The job responsibilities includes:
* Designing of project specific Steam Turbine Logics
* Standardisation of GT26 logics.
* Site support – giving solutions to the site problems.

From July 2006 to March 2007 - worked with TSN – Steam Turbine System Design, Switzerland.

The job responsibilities includes:
* Engineering of Steam Turbine system and the auxiliaries.
* Generation of Control Logics in Aucoplan for the Steam Turbine.
* Generation of P&ID
* Generation of Instrument list for the Steam Turbine.
* Selection of Instruments and the ranges.

Tools used for preparing Steam Turbine Logics and standardization of GT26 logics:

1. Aucoplan.
2. Advabuild

Bharat Heavy Electricals Limited:

From Jan 1998 to Jan 2006 with Bharat Heavy Electricals Ltd. (BHEL), Power Sector (Southern Region), India as Controls and Instrumentation Engineer – Technical Services.

The Career Path

Joined as Engineer Trainee in 1998
Promoted as Engineer in 1999
Promoted as Sr. Engineer in 2002

Projects Executed in India:

TNEB, Kuttalam:
* Responsible for commissioning, operation and maintenance of Mark V control system for controlling Frame 6FA Gas Turbine (DLN II).
* Responsible for commissioning, operation and maintenance of the DCS system supplied by BHEL, EDN "MAX DNA" for controlling HRSG, Steam Turbine and BOP.
* Also involved in the operation of the Combined Cycle Power Plant for about a period of one year.

TNEB, Perungulam:
* Responsible for commissioning, operation and maintenance of Mark V control system for controlling Frame 6FA Gas Turbine (DLN II).
* Responsible for commissioning, operation and maintenance of the DCS system supplied by BHEL, EDN "WSPOSE" for controlling HRSG, Steam Turbine and BOP.
* Involved in commissioning of Procontrol Panels for controlling HRSG, Steam Turbine and other BOP controls.
* Also involved in the operation of the Combined Cycle Power Plant for a period of one year.

TNEB, Kovilkalappal:
* Responsible for commissioning, operation and maintenance of Mark V control system for controlling Frame 6FA Gas Turbine (MNQC).
* Responsible for commissioning, operation and maintenance of the DCS system supplied by BHEL, EDN "WSPOSE" for controlling HRSG, Steam Turbine and BOP.
* Involved in commissioning of Procontrol Panels for controlling HRSG, Steam Turbine and other BOP controls.
* Also involved in the operation of the Combined Cycle Power Plant for a period of one year.

BSES, Cochin:
* Responsible for commissioning, operation and maintenance of the DCS system supplied by BHEL, EDN "WSPOSE" for controlling the HRSG, Steam Turbine and BOP.
* Involved in commissioning of Procontrol Panels for controlling HRSG, Steam Turbine and other BOP controls.

Pondicherry Power Corporation Ltd, Karaikal:
* Responsible for commissioning, operation and maintenance of Mark IV control system for controlling Frame V Gas Turbine.
* Involved in commissioning, operation and maintenance of DCS supplied by Tata Honeywell for controlling HRSG and BOP.
* Involved in commissioning of Procontrol Panels for controlling the Steam Turbine.
* Also involved in operating the Combined Cycle for a period of about one year.

Key Responsibilities:

* Commissioning and maintenance of Mark IV and Mark V system for Gas Turbine controls.
* Commissioning and maintenance of DCS supplied for the power plants.
* Modification and implementation of logics for various steam turbine control systems such as turbine oil/ vacuum system, governing system, protection, and automatic run-up system.
* Erection and commissioning of instruments in Power Plant by reading the PID drawings.
* Tuning of several auto loops for steam Turbine control system such as, Gland steam control, hotwell level control and Deaeraor pressure/ level control.

Personal Details

Date of Birth: 16th October 1976
Sex: Male
Marital Status: Married
Nationality: Indian

Academic Record:
Qualification Institution Year of Passing Credentials
SSLC St. Marys High School, Karaikal 1991 92.4%
HSC Fatima Higher Secondary School,Pondicherry 1993 88.5%
Bachelor of Technology (Electrical & Electronics Engineering). Pondicherry Engineering College, Pondicherry University 1997 83.5%

Academic Achievements: Received Gold Medal for standing first in B. Tech.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 551 to 600 of 4411)

Go to Search Parameters...

Brief Description

Seeking to apply my skills as a Planning & Scheduling Manager; QA/QC manager; Document Control Manager; Assistant Project Manager; Superintendent; Consultant. Great organizational and computer skills. MS Office, Excel, Word, MS Project, P3, Project Manager, and more.

Chartered Builder (MCIOB) Graduate Diploma in Building Management Clients Project Manager / Property Development Manager

Manager of proposals and technical support to marketing experience 5 years. Experience in Latin America and Middle East. Previous Project manager experience 15 years: wastewater treatment plants, power plants, solid waste facilities. Excellent technical writing, computer literacy.

Management experience in Russia

I would like to apply for a permanent job position in Construction Engineering and Project Management to solidify and enhance my qualifications. Roles could include Project Planning, Scheduling and Controls, Quality and Safety Controls.

Job Title : Software Enginer Education : Ordinary Degree in Bachelor of Science Previous Employer: Motorola Australia Software Centre

Proficient in effectively priorities tasks and manage a full support team

Quantity Surveyor having more than 15 years experience

11yrs experienced (2yrs in Gulf) quantity surveyor from india, having knowledges in Quantity Surveying, Contract Administration and Claims (Variation & EOT) job. Using POMI, CESMM and FIDIC contract.

14 years of Project Management Skill

I am a Filipino Citizen currently working in an Airport Project in Doha, Qatar. My contract ends in May 2008 and I am looking for a job in the US.

Versed in accounts.

A keen HSE professional with NEBOSH (U.K) International General Certificate & IOSH-Managing Safely course with Mechanical Engineering background. The experience profile ranges from: Ensuring internationally accepted Best HSE practices across Process Plants, Construction Industry, Oil & Gas EPC Proje

Construction Management of Roadways, Bridges and Buildings. Roadway Design.

Expert Layout Designer of PCB, HMC and 3D Packages using VISULA Layout Edit, CADStar, OrCAD and AutoCAD. Experience in Production of PCB, HMC and 3D Packages.

I am working since 22 Years - 9 Years in Karachi - Pakistan and since last 12 Years I am working in Saudi Arabia as a Quanity Surveyor.

Two Degrees from USA Currently Working as Project Manager in Saudi Arabia

CONSTRUCTION MANAGEMENT Managed major construction projects for established General Contractor. Projects include site development, water and sewer utility work, road, paving, concrete, and wastewater plants for Municipalities, Penndot, Commercial, Industrial, and Institutional owners.

I am proficient in the preparation of contractual documents, RFP's, RFI's, bid analysis, bid negotiations, subcontractor selection, buyouts, conceptual budgets, construction estimates, value engineering, constructability and code compliance reviews.

My employment at present involves preventative maintenance, fault diagnostics and repairs on loading equipment and terminal automated system (TAS) within a fuel storage area.

I am a Canadian citizen having 17 years solid building construction, Civil and structural design, quality Management, project management, construction Management. a dedicated team player/leader exhibiting a high level of energy and initiative under pressure.

Authorised to do switching linking safety testing and earthing upto 132kv. indoor swith gear upto 22kv

Control and Instrumentation Engineer

Extensive background in Program/Project Management.

Crane Operator with 14 years experience in Off-shore Operation, Drilling and Construction, and 6 years experience in On-shore Construction Oil Industry.

NDE Project Manager, III Ultrasonics ASNT/ACCP/EN473, Phased Array, TOFD, API 510 (lapsed), CWI (lapsed)

I am an architect and urban designer practicing in the Middle East for over thirteen years. I have held design and project management responsibilities at senior positions with international British consultants and Government organizations wherein I handled wide range of building types such as commer

Masters degree in Highway/Structural engineering, 14 years of professional experience - working in the department of roads, good skills in CAD application (eg. SAP2000) and other computer applications (eg. spreadsheets)

CPR/First Aid certification (American Red Cross), ISO 9000 Training, Computers knowledge, Spanish, Overhead Crane, Boom Truck, Forklift Operator, HyTork certification.

Lic Plumber, Boiler installer, Gas pipe installer, Basic electrical

25kv railway electrification designer. diploma in mechanical engineering from india, 3 years full time course.

Electrical Design Engineer for 10 years experience in detailed knowledge of control system engineering in conceptual, FEED, detailed design, calculation, testing, installation commissioning and operating phases of project

Mechanical Stress Engineer

Experienced Leader and Project Manager

Complete knowledge of Mike 21

*Qualification : 1) Bachelor of science in civil Engineering ) Job responsibility :

Presently I am working in Saudi Arabia. I have nearly 17 years experience. From 1996 November I am using Microstation. I can work in Microstation & AutoCAD. I have experience in AutoCAD 2006 from my personal PC. Mainly I am working in architectural discipline. I can do structural & civil work also.

Mechanical Engineer having 14 years of experience in the field of construction in Refinery, Petrochemicals & Power plant mainly focussing on Piping, Reformers & Heaters. Has been worked with major international companies like TEchnip, Technip KTI etc.

Dear Hiring Manager

Over Seven years of experience in the construction industry serving in the areas of Highways Construction, Project Management, Telecommunications, and Field Engineering.

detailed deisgn of building services,project management and execution

Bachelors in electronic engineering. Managing a group of technical staffs for maintenanace, repair and installation of weighing equipments

Heavy Equipment Operator -- Management.

Extensive experience in managing complex construction and service projects with the knowledge to balance the requirements for functionality, quality, timeliness, and safety.

Over twenty years in the engineering and construction industry, having been assigned supervision and management positions on various worldwide projects. In addition to strong technical skills across multiple disciplines, I strive to develop cohesive teams by fostering and maintaining good rapport w

Over 14 years working experience 3 years experience in design office and 11 years experience in the construction and supervision of major prestigious international projects .

An engineering position in the emphasis of tool design, opto-mechanics, manufacturing, liaison, stress analysis, aircraft interiors or structures.

13+ years geological/geotechnical/GIS international hands-on experience in the construction & energy industries. MSc/BSc/PgD in the geosciences. Excellent software skills. Contractual or permanent post sought. Available now.

17 years in the field of construction, Experience Architectural Works and Interior works in the construction of the following building such as: Five Star Hotel, Convention Center<Condominuim, High rise Offices, Commercial and residential ,Civil Defense Mass Rapid Transit and chemical Plant.

•Strong knowledge of engineering design principals and methods necessary to adequately dimension and detail complete design concepts. •A thorough knowledge of mechanical, pneumatic, hydraulic components and electrical systems. •Experience with Classification Society Rules and Regulations.

First 1 2 3 4 5 6 7 8 9 10 11 [ 12 ] 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out