Resume - Planning Engineer with more than 5 years local and international experience in t...

Misco Jobs

Resume #70695

CONTACT INFORMATION:
View contact information...

PROFESIONAL EXPERIENCE – Dennis Pantig

Feb 2008 - Present
Planning Engineer – Projacs Int'l (Project Management Consultancy)
Client was Qatar Olympic Committee (QOC) under Sports Facilities Department (SFD). Doha was one of the applicant cities in the 2016 Olympic Games. Therefore, QOC has to rebuild and construct additional sports facilities using the latest state-of-the-art designs that are necessary requirements for the 2016 Olympic Games.
* Reports directly to the Project Manager of QOC for the project schedule.
* Presently handling the sports facilities project in the preparation, update and submission of monthly progress reports in pre-design and studies stage, detail design stage / tender and award, and construction stage.
* Consolidate and update all projects using the latest software in planning Primavera Project Management version 6.0.
* Assist the Project Coordinators in analyzing the baseline schedule submitted by the Contractor for any inaccuracy, illogical sequence, unreasonable time / duration and dead activities that are important to establish the correct critical path.
* Coordination between Contractors to standardize the methods of planning such as: report submissions, progress calculations, progress evaluation (actual), and orient to use the standard report layouts.
* Check and verify the progress reports submitted by the Contractor.
* Provide any recommendations when actual progress deviates from the scheduled progress so that work may be re-scheduled or accelerated to provide on-time completion.
* Maintain project schedules and changes.
* Participate in coordination meetings and minutes of meetings as required.
* Undertake other tasks assigned by Project Coordinators and Project Managers.
* Attend to other general and administrative staff duties.

Aug 2006 – Nov 2007
Planning Engineer / Site Coordinator – Saudi Oger Ltd. (General Contractor)
Client was KJO (Khafji Joint Operations) a joint operation between ARAMCO and KGOC (Kuwait Gulf Oil Company) to construct approximately 400 plus family villas, government offices, mosques, site development, electro-mechanical facilities, mid-rise buildings, sewage treatment plants, water supply piping networks for KJO employees and local citizens.
As Planning Engineer
* Reports directly to the Site Project Manager for the project construction schedule.
* Responsible for preparation of EPC (Engineering, Procurement & Construction) planning, scheduling & control of the project as per contract, plans & specifications.
* Responsible for preparation of Bar Charts and S-Curves, Resource, Network Diagrams, Updating Forecasting Cashflow Diagrams, Comparison to Targets with Current Schedule and forecasting Tracking Critical Path and Monthly Reports organizing Sequencing Activities using PRIMAVERA Reports.
* Responsible for the updating progress of planning schedule using Primavera 5 thru ARAMCO server. Close monitoring and checking progress schedule. Participate in staff meetings and prepare and update manpower & equipment forecast vs. actual schedule. Determine if manpower deployment are sufficient enough to complete their tasks in strict compliance with schedules.
* Responsible for developing and maintaining baseline schedule as per established project procedures and methodologies. Reviews and forecasts contractor work front availability and coordinates with field engineering and material groups to ensure problems are identified to Project Management for further action. Responsible for compilation of weekly status report.
* Reviewing and evaluation of budgetary cost estimates, Inspection of client construction sites, construction cost analysis, cost reporting and monthly progress report.
* Conduct weekly meeting and discuss the potential delays that affect the progress.
* Prepare and update weekly manpower report for close monitoring of manpower status direct and indirect.
* Prepares Daily Construction Activity report, 2 Week Look-Ahead Schedule, Weekly Progress report as per planned schedule, Monthly Progress Report.
* Coordinate with other department through briefings and conferences as the works progresses.
* Prepare and update of weekly meeting agenda / minutes of meeting.
* Filing and documentation
* Review tender and contract documents.
* Prepare interfacing works schedule and ensure that the flows of work is fully achieved.
As Site Coordinator
* Conduct regular coordination meetings with contractors / sub-contractors to avoid and identify potential problems that may arise from work interfacing.
* Review details of construction plans and coordinate with the designers when conflict arises between mechanical and works.
* Evaluate variation orders, various claims as well as regular monthly progress billing of sub-contractors and suppliers and the same shall be forwarded to the owner for payment.
* Preparation and consolidation of all trades and general construction monthly progress report.
* Prepare estimates for material take-off.
* Close coordination with all sub-contractors (Architectural, Plumbing and Electro-Mechanical works), starting from issuance of plans, actual site mobilization, and work completion.
* Prepare schedule of material delivery to ensure that the work is completed as per schedule.
* Conduct coordination meeting on site with the presence of the quality control in a particular discipline and recommend variation order should it be necessary.
* Prepares as-built drawings in AUTO-CAD.
* Implementation of jobsite safety.

Aug 2002 – June 2006
Planning Engineer – EEI Corporation (General Contractor)
Was assigned in various projects industrial, mid-rise building, power plant and in steel fabrication
* Reports directly to the Project Manager for the project construction schedule.
* Responsible for the planning, scheduling & control of the project as per contract, plans & specifications.
* Conducts actual inspections for the progress monitoring of works as per planned schedule, quantity tracking, material estimates & introduce measures for better workmanship & strict compliance with the planned work schedule & implementations.
* Responsible for the preparations of Bar Charts and S-curves together with the applicable PERT-CPM for the scheduling purpose of the project activities.
* Prepares/updates manpower & equipment loading
* Responsible for the preparation, submission of progress billings, claims / additional works including reconciliation with clients and bill as agreed.
* Prepares Daily Construction Activity report, 1-3 Week Look-Ahead Schedule, Weekly Accomplishment report as per planned schedule, Monthly Project Accomplishment Report & Monthly Review of Operations.
* Coordinate with other department through briefings and conferences as the works progresses.
* Any other duties and responsibilities that may be given from time to time.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1101 to 1150 of 4363)

Go to Search Parameters...

Brief Description

Planning Engineer with more than 5 years local and international experience in the field of mechanical / planner engineering from construction of Industrial, Building and Domestic Residential onshore project acquired extensively with past position handled on the above qualification.

Has an extensive experience of 4 years & 10 months in this trade of discipline from design to implementation of projects both Civil and MEP Works, wide scope of planning, quantity surveying, estimating, cost engineering, cost controlling and project management skills.

Planner & Contract engineer

Senior HSE Manager

Experience CNC Maintenance engineer including installation and troubleshooting. Familiar with Fanuc and Mitsubishi CNC control

Document Control & IT / IS Support Services. Defining and implementing the strategy for the Documentation Management System during the project phase up to the hand-over to Operation.

I work almost 15 years and I can Repair the following Equipment in my CV

A motivated, dedicated and technical expert in mechnical and electrical system

I am lead field engineer in Jubail 2 project, AVS with good managerial skills

Drafter

Electrical foreman, superintendent, master electrician. Very familiar with NEC

During 19 years, I have gained some practical field experiences & knowledge as a construction civil engineer/ manager which includes, projects construction supervision, project management, quality control, coordination & liaison in the project team, field survey

qualified to CSWIP 3.1 and AWS CWI, Knowledge of welding Inspection, piping and mechanical inspection.

I am seeking employment on construction/shutdown projects as a QA/QC inspector or planner.

Mechanical Cement & Power plant Projects Installation, Commissioning & Maintenance

I am 38 years old, good health and have 12 years solid experience on project management for several types of large, complex and fast track International projects.

Senior Construction/ Field Engineer/Superintendent with HND Mechanical Engineering and a member of the institute of incorporated engineers. I have 15 years of experience in Construction management in various roles and locations around the world, working for major EPC contractors.

5 Yrs plus experience in overseas construction project in Singapore

I have good command in field of erection,commissioning,Maintenence and inspection of mechanical equipments.

Computer Knowledge: AutoCAD, Power Point, Windows. Bilingual fluent English and Spanish, scale models confection, field inspection. Willing to offer a high quality work, very responsible. Professional license # 3435

Basic Knowledge in Auto Cad , Microsoft word &Microsoft excel

Electical, plumbing, carpentry, building and ground maintenance as well as hvac experience

Degree qualified Construction Manager with experience of working in wastewater treatment industry. I possess both Management and Design capabilities.

Extensive knowledge of structural design of boats and barges as well as general steel and aluminum construction, machinery, propulsion systems both conventional and water jet. Extremely knowledgeable in AutoCAD and Microsoft Office programs. Well versed in A.B.S., D.N.V., USCG rules

Mine Electricain

mig, 035 wire to 055 wire; fluxcore. 035 to 1/16 wire; stick. 7018 & 6011

Fiber Optic Technician, Troubleshooter of terminal equipments and links.

Hardware, Windows, Office-2007, Word, Adobe Acrobat Reader, Autodesk DWF Viewer, Internet Explorer, AutoCAD-2008, 3ds Max-9, Architectural CAD, Smart Draw & Photoshop

AutoCAD, Autodesk LandDesktop, Drafter, Designer, Architecture, Residential, Commerical, Building, Structure, House

i am a civil and water engineer by profession and i have a master's degree in water resources engineering

I am a licensed civil engineer with 5 years experience in Piping works using AutoCAD (2D & 3D)

Fabrication of structures,piping,ducting,pressure vessels,heat exchangers,storage tankages etc,Drawing interpretation,P &ID,Process development,Cost controll,QA,QC,Engineering coordination,Preparation of factory,tool room layouts,Client,Supplier negotion,Preparaion of BOQ

Offering Extensive Experience in Industrial Electrical/Instrument Equipment

Senior Welding Inspector

Pursue a career in the, Chillers Systems, Refrigeration, Air conditioning,

Camp Boss/Driver/Roust about

Recent MBA Graduate looking for entry level positions in finance and general business management – Financial, Commercial/Marketing and Project Controls Associate/Analyst. Excellent communicator with fluency in English and Russian. Solid academic credentials in business, economics, analytical finance

Knowlegeable on 2D&3D AutoCAD Drafting, ArchiCAD, Vectorworks, Photoshop, Office Apllication, - Word and Excel, Outlook , Internet, Manual and Computerized Rendering, Mechanical/ Conveyor Technology (as per ASTM, ISO, JIS, and Other Drawing Standards), well versed on the English System Units.

Electrical Project Manager 20+ years experience

Dear Sir, Since I am looking for an interesting job opportunity in line with the job recruitment that you have recently started, I have the pleasure to submit my Curriculum Vitae for your review. For the future I would like to work in a well-organized company in a position of planner engineer.

Have worked in all departments of construction project sites, well knowledge in computers

Licensed Civil Engineer, exposure to project / construction management for 8 years, assigned to do field and office engineering works like field inspection, work monitoring, and cost estimates for 3 years, familiar with basic forms of contracts-FIDIC, CIAP, computer literate - MS office application

I¡¦m a B.E.,(Mechanical Engineering) graduate, graduated from Bharathiar University, Coimbatore (South India) with First class during the year 1992. I have a rich 12+ years of experience in various fields mainly in the area of projects Execution.

I AM A MECHANICAL ENGINEER WITH 8 YRS EXP IN MANAGING PROJECTSITES AT BPCL,IPCL IN INDIA,FABRICATION AND ERECTION OF PIPELINE,MAITENANCE OF PIPELINE ERECTION OF EQUIPMENT PRESENTLY IN DUBAI ON VISIT VISA AND LOOKING FOR EMPLOYMENT IN UAE.CAN SPEAK BOTH ENGLISH AND RUSSIAN LANGUAGE.

Target oriented professional with excellent leadership skills, proactive attitude and mastering strong inter-personal relations with people of different cultures.

worked as junior engineer on various projects around the world. Adapt easily to harsh conditions.

I am searching for employment with a company that has satiability and longevity.

Total Experience is of twelve Years encompassing Senior Civil Engineer for Eight Years and Site Engineer for Five years and as a professional experience in Project engineering for Major Construction Projects in the Middle East & India.

To obtain civil engineering employment in an environment that will encourage the growth of a young, enthusiastic engineer.

Quality control engineer, welding inspector, level ii in rt,pt,mt,ut, and cswip 3.1

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 [ 23 ] 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out