CONTACT INFORMATION:
View contact information...
Australian Visa: Class BN Subclass 136 Skilled - Independent
Certificate of Competency #: 0513160338389
Issued: November 10, 2005
Driver's Licensed: N04-93-272560
SSS No: 33-6084913-1
Objective: To give superior service to the company and serve willingly for any job task assigned
License Attained
Title: BUILDING WIRING ELECTRICIAN
Certificate of Competency #: 0513160338389
Issued: November 10, 2005
License Authority: TECHNICAL EDUCATION and SKILLS DEVELOPMENT AUTHORITY [TESDA]
Location: TESDA Complex, East Service Road South Super Highway, Taguig, Metro Manila
Work Experience
AAC [Arabian Air-conditioning Contracting]
HVAC, Plumbing, Fire Fighting, Electrical & Maintenance Services
GRADE A Electro – Mechanical Contractors
P.O. Box 40688, Doha, State of Qatar
Tel. #: 4317488/ 4317489 / 4316345
Fax: (0974) 4317487
Email: arabianyork@qatar.net.qa or contracting@aac.com.qa
Web Site: aac.com.qa
October 14, 2006 – July 03, 2007
July 04, 2007 – October 16, 2007
Position: Electrical Foreman
Jobsite: Tower F, Parcel 2A Pearl Qatar Tower
Date: July 04, 2007 – October 16, 2007
DUTIES and RESPONSIBILITIES:
1. Supervise rough installation of RSC, IMC, EMT & PVC Pipes for power, lighting, telephone and auxiliary system (Fire Alarm, BGM/pa, Intruder Alarm, Clock, CATV & CCTV System) and installation of various types of devices such as power outlets/sockets, lighting fixtures, telephone outlet, wiring and auxiliary devices. (Smoke Detectors, F.A Bell F.A. manual station, Speakers, Door Detectors, motion detectors) from Level 4 - Level 15 Parcel 2A Tower
2. Plan, prepare daily task schedule, call meetings for distributions of responsibilities to each staff under my supervisory
3. Prepare materials take off prior to slab concreting
4. Coordinate through meetings with the Project Mgr, Project Engineer, Civil Engineer, Safety Engineer. and Project Consultants with regard to project development
5. Make daily, weekly and monthly written reports and submit to the Proj. Engr. with regard work status per floor bldg level basis
6. Coordinate via meetings with other trades: Steal Fixer Foreman, Post Tensioning Foreman, Carpenter Foreman and Project Consultants to avoid conflict and delays at work
Position: Electrical Foreman
Jobsite: Karh-amaa Substation [PSS2 and PSS5]
Date: October 14, 2006 – July 03, 2007
DUTIES and RESPONSIBILITIES:
1. Roughing – in layout of RSC, IMC, EMT & PVC Pipes for power, lighting, telephone and auxiliary system (Fire Alarm, BGM/pa, Intruder Alarm, Clock, CATV & CCTV System)
2. Wiring & termination works for power, lighting, telephone and auxiliary system
3. Installation of power outlets/sockets, lighting fixtures, telephone outlet, wiring and auxiliary devices. (Smoke Detectors, F.A Bell F.A. manual station, Speakers, Door Detectors, motion detectors)
4. Testing and commissioning of all system. (Installation test, continuity test)
5. Installation of low voltage Switch gears, Panel Boards, Distribution Board, Motor Control Center and low voltage distribution Transformer including its cabling, raceway and termination.
6. Installation of Cable trays including fabrication of its support system
7. Laying of High Voltage and Low Voltage feeder Raceway. (Laying of 2"0 PVC to 6"0 PVC)
8. Meeting and planning with the Project Engineer with regards the project status and activities
9. Supervise electricians and helpers in the jobsite
10. Make daily activity reports and accomplishment
United Neon Ever Corporation
4F HPL Bldg. 60 Sen. Gil Puyat Ave. Makati City
April 03, 2006 – September 23, 2006
Position: General Building Electrician/ Building Maintenance
DUTIES and RESPONSIBILITIES:
1. Develop as-built plans of the electrical system of the building
2. On call 24/7 on emergency electrical problem that may arise anytime
3. Determine proper balancing of load on 3-phase supply
4. Maintain all electrical apparatus of the building
5. Installation of Electrical Devices such as, convenience outlet switches and circuit breakers
6. Installation and repair of Lighting fixtures
7. Maintain and repair various types of electrical equipments such as fan blowers, A/C Motors and transformers air conditioning
8. Label all circuit breakers / panel boards
9. Lay out of cables and electrical conduits
10. Regular Monitoring of elevator controls
11. Replacement of busted light bulbs of the building's hallway
12. Rehabilitate existing electrical system that have been worn out due to wear and tear
13. Supervise other contractors that will perform repair
14. Monitoring of PABX
15. Termination of wires inside the panel boards
16. Regular check up of loading of electrical system
17. Daily check up and inspection of electrical rooms of the whole five floor building
RERA Material Handling Corp.
RERA Material Handling Corp. Molino –1, Bacoor, Cavite, Philippines
16th August 1999 up to March 24, 2006
Position: Senior Electrician
DUTIES and RESPONSIBILITIES:
1. Makes an ocular inspection of the Job Site
2. Consults and meets with the Project Engineer with regards to the Project Planning
3. Lists of Materials needed to be purchased for the said Project
4. Installs of Panel Board, safety fuse box, cut-out box and circuit breakers
5. Installs/Replaces/Repairs light bulb sockets, wall outlets and switches
6. Supervises in pulling of wires inside the Electrical Conduit
7. Rewires of grounded circuits
8. Measures the current, using clamp meter, make sure that each circuit is not overloaded
9. Replaces and repairs existing fuse box and circuit breaker
10. Make a final inspection before putting the main switch on
11. Rewinds of A/C motors/Replace capacitor and bearings
12. Installs Electrical appliances such as fans (all types), water pumps and A/C units
13. Conduit layout and wiring termination
14. Cable layout
15. Power Panel board wiring and termination
16. Cabling and conduit layout for Service Entrance
17. Cable splicing for Service Entrance
18. Wiring and perimeter lighting installation
19. Connects annunciator, telephone and intercom system
DM HERNANDEZ ENGINEERING
19th of June 1995 – 31st of July 1999
129 Lourdes dr. corner N. Domingo St. San Juan Manila
Position: Electrician
DUTIES and RESPONSIBILITIES:
1. For INSTALLATIONS
* Installs, replaces/ repairs of lighting fixtures
* Replacement of busted starter, ballast, fluorescent holder and light bulb
* Install, replace and repairs of lights switch and electrical sockets
* Mounting of panel boards, from 30-600 amperes
* Layouts of cables from #14 to #200 mcm
* Layouts of pipes from half inch (1/2 inch) to 4 inches
2. For HOUSE WIRING
* Layouts of electrical wiring
* Installs/Replaces/Repairs of safety switch and circuit breaker
* Installs/Replaces/Repairs fuse box, cutout box, circuit breakers
* Replaces/Repairs defective wall socket, switch, light bulb sockets and lights
3. For REPAIRS
* Repair of Electrical appliances
* Washing machine and Dryers – rewind of motors. Replacement of capacitor, repairs of switches, re-shafting and re-bushing. Change of belts and other spare parts.
* Electric Oven, Flat iron, Microwave – Trouble shooting and replacement of defective parts
* Water pump – Rewinding of motors. Replacement of capacitor, bearing, shaft seal
* Electric Fan and exhaust fan – rewinding of motor, re-shafting and re-bushing, replacement of capacitor, fan blades, repairs of switches, Change of gears and other spare parts.
* Pulling of cables inside electrical pipes
* Rewinds/Repairs/Installations of A/C motor from ½ horse power to 5 HP (horse power)
4. Makes a final inspection before turning the main switch on.
PSALMS 23 ELECTRICAL SERVICES
1st of April 1987 - 31st of May 1995
8th of September 1986 - 31st of March 1987
111 N. Domingo St. San Juan, Metro Manila, Philippines
Position: Electrician
Inclusive dates: 1st of April 1987 - 31st of May 1995
DUTIES and RESPONSIBILITIES:
1. Survey of location and planning
2. Install Panel board, safety fuse box, cutout box, and circuit breaker
3. Connection of wirings in Panel Board
4. Layout of wires and electrical pipes such as Conduit and PVC Pipes
5. Determine the route, number and connection of wires as per plans or drawing specification
6. Tightening, splicing copper conductors, weather proof switches, receptacles and plugs
7. Maintaining of meter base and services
8. Check all Electrical fixtures like lights, switch, wall outlet, circuit breakers and fuse box if properly installed and functioning
9. Install and repair fans (all types), A/C Unit, water pumps and other electrical appliances
10. Test ad correct circuit if it is grounded or not functioning
11. Replace defective fuses and circuit when discovered to be in malfunctioning status
12. Rewinding of A/C Motors and coils
13. Make a final inspection before turning the main switch on
Position: Apprentice Electrician
Inclusive dates: 8th of September 1986 - 31st of March 1987
DUTIES and RESPONSIBILITIES:
1. Prepare tools and material needed in the project.
2. Assisting in assembly of scaffoldings and ladders
3. Assist in layout of wires and electrical pipes such as Conduit and PVC pipes
4. Chisel walls in preparation for utility box, junction box and electrical pipes
5. Putting guide wires inside the electrical pipes
6. Assist in pulling of wires and cables (electrical)
7. Install lighting fixtures, switches and wall outlets
8. Disassemble appliances needed for repair and maintenance
9. Provide assistance like holding, lifting, pulling whenever needed by Senior Electrician
10. Make sure that all tools are kept, secured and cleaning the workplace before leaving the Job Site
Trainings/Seminars:
Title: OCCUPATIONAL SAFETY Date Taken: November 10, 2005
Institute: MERALCO Foundation, Inc. No of Hours: 3
Location: Meralco Foundation Inc. Building Ortigas Avenue, Pasig City, Philippines
Title: ELECTRICAL SAFETY Date Taken: July 19, 2004
Institute: RERA Material Handling Corp. No of Hours: 8
Location: RERA Material Handling Corp. Molino –1, Bacoor, Cavite, Philippines
Title: BLUE PRINT READING Date Taken: January 6, 2003
[A basic hands-on program for Electrical Plan Layouts & Schematic Diagram Familiarization]
Institute: RERA Material Handling Corp.
Location: RERA Material Handling Corp., Unit 302, Reans Bldg., #93C Jose St., Malibay, Pasay City, Philippines
Title: BUILDING WIRING INSTALLATION Date Taken: October 2, 2002
Institute: RERA Material Handling Corp. No of Hours: 96 [on the job training]
Location: Mornese Center of Spirituality, Mamon Road, Pansol, Calamba City, Laguna, Philippines
Tools Managed:
* PLIERS
* LONG NOSE PIPES
* SIDE CUTTER
* SCREW DRIVER
* PHILIPS SCREW DRIVER
* HAMMER
* HACK SAW
* ALLEN KEY
* OPEN WRENCH
* BOX WRENCH
* COMBINATION WRENCH
* VICE GRIP
* CHANNEL LOCK
* MULTI TESTER
* ADJUSTABLE WRENCH
* SOLDERING GUN
* SOCKET WRENCH
Skills:
Basic typing (MS WORD)
Basic Internet
Educational Background
Highest Education
Vocational Course Taken: BUILDING WIRING INSTALLATIONS and MAINTENANCE
Name of School: MERALCO FOUNDATION, INCORPORATED (MFI)
Year Taken: September 11, 2005
Year Graduated: October 30, 2005
Location: Meralco Foundation Inc. Building Ortigas Avenue, Pasig City
Philippines
Short Course Taken: CALL CENTER PROFESSIONAL TRAINING in
COMMUNICATIONS SKILLS and AMERICAN ACCENT
Name of School: Informatics Computer Institute
Date Taken: June 2006
Date Graduated: July 2006
Location: 2/F Security Land Bldg., 6797 Rufino St., corner Ayala Ave., Makati City
Philippines
Character Reference:
Will be provided
View contact information... |