Resume - Millwright Supervision

Misco Jobs

Resume #73192

CONTACT INFORMATION:
View contact information...

Objective
Desire to play a key role in ensuring quality, safety, communication and commitment.

Qualifications
Quality Control and safety management Familiar with regulatory and safety compliance (OSHA, HAZMAT). Site inspections, product acceptance, documentation and reporting. Skilled in the methods and practices of industrial maintenance and mechanical repair in the construction and in-plant maintenance industries. Preventive maintenance. Familiar with test equipment and precision test instruments. Interpret and work from schematic, isometric and orthographic projection blueprint drawings. Ability to draw field sketches to communicate ideas. Layout and setting base and sole plates. Pre-alignment for drilling and tapping. Installation, troubleshooting and repair of heavy equipment, precision coupling alignment and installation. Overhaul of pumps, steam and combustion turbines, fans, gear boxes, generators, and various rotating equipment. Replacement and installation of bearings, seals, packing and fabrication of shims and gaskets. Alignment, conventional, reverse, laser and optical. Design and fabricate specialty jigs and or tools. Installation, troubleshooting, repair and maintenance of hydraulic and pneumatic systems, repairs on compressors. Building and installation of conveyors, repair and maintenance of belt and chain drives. Vibration analysis and pipe stress. Use of SMAW equipment for welding, cutting, heating and tool fabrication. Rigging-light, chain hoists to more heavy complex rigging and gantries. Operation of forklift, small and overhead cranes. Own hand and precision tools. Good physical strength and co-ordination with sufficient strength and stamina. Professional, honest, organized, dependable and punctual. Valid Driver's license. Available for travel and flexible shifts.

Education
Attained Millwright Apprenticeship.
Certified with BE&K.
Certified with Fluor Daniel.
NCCER National Certification.
8 hour OSHA.
NCCER Craft Trainer
Attended AWS Seminar for D1.1 and API

Relevant Experience
Millwright Supervision for Fluor Corporation, Immediate supervisor Joe Perry (Construction Manager) for the Wateree Operating Station for the SCE&G S02Compliance Project located in Eastover, SC. My responsibilities included but were not limited to daily reporting and inspections on work in progress. Coordinate problems and solutions between the site supplier, equipment Vendors and contractor. Coordinate work with piping Superintendent and other area Superintendents. Ordering of tool crib and any necessary tools and supplies. Oversee BOP and other maintenance of all rotating equipment on project. Review and oversee the storage, preventative maintenance and cleaning equipment prior to and during installation. Work under supervision and direction of the Project Superintendent during the construction, testing and startup of S02compliance equipment.

Millwright Supervision for Fluor Corporation, Immediate supervisor Gary Dobbins (Superintendent ) The Oak Grove Project a 1,600-megawatt, lignite-fired power plant in Robertson County. Much of the infrastructure is already in place from 30+ years prior. Much of the equipment is from the previous uncompleted project. My responsibilities include but are not limited to the installation of 27 coal pulverizers; some are B&W and some are Alstom. Installation of various fans and 2 preheaters. Maintaining and filing written reports and documentation, troubleshooting and quality control.
I am also a craft instructor for the NCCER Millwright Apprenticeship program on site.

Millwright Supervision for The Shaw Group, Inc., Immediate supervisor Lee Dowdy (Construction Manager) Installation of two scrubbers and Installation of nitrogen oxide control equipment on three units at Chesterfield Power Station in Chester, Va. for Dominion Power. Chesterfield power Station is an eight-unit, coal and natural gas fired co-generating station in Va. with a capacity of more than 1,700 megawatts. This equipment will lower the station's nitrogen oxide and sulfur dioxide emissions. My primary responsibilities included but were not limited to maintaining and filing written reports and documentation. Workflow and scheduling, troubleshooting and quality control. Ordering necessary supplies and tools, setting up tool trailers and parts inventory controls. Working with engineers and construction manager on schedules and 3 week look ahead.

Millwright Supervision for The Shaw Group, Inc. phone, Immediate supervisor Leon Carpenter (Superintendent) Installation of flue gas desulfurization equipment-commonly know as scrubbers for Duke Energy's Marshall Steam Station in NC. Marshall Steam Station is a four-unit, coal fired generating facility with a capacity of 2,090 megawatts. This equipment will lower the station's sulfur dioxide emissions by approximately 95 percent. Projected scheduled completion in 2006. My primary responsibility is overseeing the building and installation of the ball mill for this project. Other responsibilities included but were not limited to; training and instructing others on precision equipment and techniques in other areas of the project where needed. Maintaining and filing written reports and documentation. Workflow and scheduling, troubleshooting and quality control. Enforcement of codes and safety regulations. Close to 2 million safe man hours and ahead of schedule.

Millwright Supervision for S&B Construction phone, Immediate Supervisor Lonnie Greene (Superintendent) S&B and Bibb and Associates, Inc. executed this combined cycle project as a joint venture for the Hines Energy Complex Power Block III for Progress Energy near Bartow, FL. The project comprised the installation of two Siemens Westinghouse 501FD combustion turbines, two Nooter/Eriksen supplementary fired heat recovery steam generators with SCR and CO catalyst, a Siemens Westinghouse HE steam turbine, and dual fuel (natural gas and light liquid fuel). S&B had overall project management, purchasing, and construction responsibility. My primary responsibilities were the installation of various components on the combustion turbines and final stages of installation of the steam generators.

General Foreman for L-Con a division of Lexicon Inc. phone, (Superintendent)
Installation of a new Flue Gas Scrubbing System, 2-140,000 #/hr CO boilers, Deareator, Boiler Feedwater System, Cat Feed Hydro-Treater, Gas Compressor, Make-up Water System, FCC Gas Duct System and many other modifications, expansions and additions to the operating Valero refinery in Ardmore, OK. My primary responsibilities were all aspects in the installation of the Gas Compressor and the Deareator and Make-Up Water System on the Scrubber. Other responsibilities included but were not limited to; interpreting blueprints and drawings and schedule assignments to personnel assigned to my crew. Working closely with company reps and quality control inspectors. Maintaining and filing written reports and documentation. Enforcement of codes and safety regulations. Completed project on time despite some unexpected changes in design on an operating facility.

Other Experience
I have over 20 years of experience working in the industrial construction industry, from shutdowns to rebuilds and expansion projects, including grassroot projects. This experience includes but is not limited to working in chemical plants, refineries, geothermal plants, paper, power industries, and various processing plants. Some of the larger companies I have worked for are, Fluor Daniel, KBR, SW&B, BE&K, Midsouth Maintenance and Southern Industrial. Some of the more notable projects have been the installations of WFGD wet flu gas desulfurization equipment and ball mills of coal fired power plants. These installations were for Duke Power, Dominion Power, SCE&G and Progress Energy. Another notable project was the installation of three Westinghouse Co-Gen units in Harquahala, AZ for The Shaw Group, Inc.

Prior to working in the industrial construction industry, I worked several years in Millwright Maintenance for Dayton Walther Corporation in Dayton, OH. This is where I received my millwright apprenticeship and training. Responsibilities for this position included but were not limited to, preventive maintenance, troubleshooting and correcting mechanical problems which include pumps, compressors, valves and various rotating equipment and isolating electrical problems, including switch gears, motors and wiring.

References Available Upon Request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1201 to 1250 of 4364)

Go to Search Parameters...

Brief Description

Mechanical design engineer

Construction Quality Control Manager/ Construction Observer Manager

I AM A PERSON WITH A HANDY KNOWLEDGE AND GOOD EXPERIENCE.

Sheet metal enclosure design with Pro-e

I have more than 8 year experience in Administraion & document control works related with construction, at present working as a document controller for Al Waab City Project Qatar with Arabtec Construction Co.

I have approx. 4 years relevet experience and sound knowledge in this field, i am hard working and self motivated,

A highly talented Heating, Air-Conditioning and Refrigeration Installer with huge experience in maintaining, installing, inspecting and repairing heating, ventilation, air conditioning (HVAC) and refrigeration equipment

Quantity measurements, Subcontractors / Clients monthly statements, value engineering, Contractual & commercial letter writng for variationsin work or EOT claims, etc. as per FIDIC conditions of contract,, Rate analysis, etc.

Detailed engineering of SLD for 400 KV Switchyard with one and half breaker scheme•HT/LT cable sizing, specification, data sheets•Equipment specifications & Sizing for Switchyard,400V LV switchgear Emergency Diesel Generator set, DC system, UPS•Short Circuit calculation for GCB using IEEE C–37.03

autocad operator

Qualified Electrician, have management skills, 22 years post apprenticeship experience.

1st class Mechanical Engineering diploma in the year 1986. Coordinating of Site Project Management staff for the construction of the Oil & Gas Project.

Millwright Supervision

Over 14 years of experience in the field of Welding Technology as Welding Manager / Welding Engineer in quality control activities of fabricated products such as Boiler & Pressure Vessels, Heat Exchangers, Columns, Storage tanks/spheres, Piping spools and Heavy structural steel items for petroch

My years of experience have equipped me with a multitude of skills, and I would like to continue my growth at a progressive organization. Additionally, I possess strong office/administrative, and good planning skills,

Project Manager

15 years in Fabrication, Construction, Installation, Hook-Up , Pre-commissioning, commissioning works of offshore Process platform, jackets,decks,bridges, modules, laying of sub-sea pipeline, Graduate Engg, Piping Engg,CSWIP3.2, B'Gas, API510, 653,570,ASNT LevelI, AUT Interpretor, IRCA Lead Auditor,

Construction Engineer with core skills in Project Management, Contracts, Facilities and Value Engineering

I have a lot of years of hands on experience in the plumbing industry I can lead large groups of technicians effectively through out all phases of any construction project. I strongly believe that I can easily handle any job regardless of size

Project Planning & Coordination, Cost Control & material Procurement

Resume consist of Personal Data, Employment History & Field of experience.

Many of my skills have been attained through hands-on experience gained whilst working through different the different regimes of the indusries in which have been employed. I attended University as a mature student.

Licensed Electrical Supervisor / Project Manager with 30 years experience

To Pursue a Challenging Career in Project Management, Engineering, Construction, Oil / Gas and Power Generation related work Offshore or Onshore.

Professionally qualified accountant in South Africa (CPA). Based in South Africa with work experience in Canada, USA and Mozambique. Varied industries include 10 years in engineering, construction and project management.

Tendering & Proposals, Estimation, Project Planning, Quantity Surveying

Diploma in mechanical engineering and having 7 year of experince in petrochemical, fertilizer, sugar plant and refinery field

Licensed Mechanical Engineer with special training and experience in design, estimation, material procurement, installation, testing and commissioning of HVAC system for both industrial and multi storey building in accordance with international standards and codes of practice such as ASHRAE Standard

I am a Civil Engineer, having more than 10 years experience in Construction Industry.

US citizen. Bilingual: Arabic, Interest in reading and research, Good organizational, analytical

Mechanical Engineer with 5.5+ years of experience in Project Planning

Materials Science Engineering, Physics, Polymers

Motivated,Experienced,

MEP Professional Engineer

Asphalt Plant Manager/Foreman 38 years in asphalt production field

AutoCAD, ADT,3 DS Viz, MSOffice, C, C++, Unix,ProE

I am certified in Heavy Equipment certified in Loader, Dozer, Backhoe (TLB) and Excavator other certificates were MSHA, First Aide and Flagger

Design, Commissioning and Installation of Devices of Building Management System

Free! Lead / principal instrument engineer, technical equivalent of a Bsc degree in Electrical engineering. My experinece in brief :14 yrs Petro-chem, 5 yrs Mining, 2 yrs Paper,4 yrs Beverages, 1 yr Smelter, 1 yr Boilers, 1 yr Power, 8 yrs Nuclear

A MECHANICAL ENGINEER having abilities such as Good Communicator, Smart Worker, Quick Learner, Result oriented and initiator

My qualifications are reinforced by over 20 years of Industrial Insulation as a front line supervisor. Multi-tasking for the past 5 years as a Painting Supervisor as well as Insulation Supervisor, has expanded my talents to a broader range that may well serve you better.

project in erection, maintenance and up gradation project of 40 MW power station and

structural supervisor for pre assembled structure,mining,field,operation,offshore,steel erection,

INSTRUMENT INSPECTOR IN GULF IN PROJECTS IN OIL AND GAS SECTOR

Architectural Draughtsman( I.T.I ) 2years. (auto cad r14 to 2008) 3d max & photoshop

an effective young graduate with the ability to work in all level of organisation.possessing strong interpersonal and influencing skills,and a high level of integrity in view to acquire more knowledge on the service are of my ideals date. B. eng

Good HR knowledge and background in HR and Administration compensation and benefit, outsourcing manpower and recruitment and selection training and people development, Performance Appraisal industrial relations and management system implementation.

Self-Motivated, extensive experience in design, Project management, Hospital Engineering, Renewable Energy, Teaching, Research and Development etc. Able to quickly identify root causes of problems and to create effective solutions. Have high level of oral and written ability. Fast learner, reasonab

Have facility engineering construction support experience as mechanical/ Electrical/ Plumbing (MEP Engr.) associated with construction of large commercial facilities. I can detail my own drawings using Microstation and/or AutoCAD software as required. I am alternate Site Manager for our team of en

Contract working, supervision of dam construction, geological worlks etc.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 [ 25 ] 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out