Resume - Operating Engineer

Misco Jobs

Resume #73486

CONTACT INFORMATION:
View contact information...

SUMMARY:
Veteran of the United States Navy Seabees (FMF), over 10 years experience as an Operating Engineer. During this time I have held several leadership positions including Petty Officer in charge of WESPAC Dozer Crew for the US Navy and foreman/temporary lead foreman at Browns Ferry nuclear plant for a TVA contractor. I have 5 yrs.+ experience as a radiation worker and operating engineer in the nuclear field.

ACCOMPLISHMENTS:
-Operating engineer for Holtec at Browns Ferry Nuclear in Athens, AL for Spent Fuel Storage project.
-Crane Operator for CR Meyers at SCA tissue plant in support of expansion project. 60-90 ton hydraulic and 100 ton Lattice Boom.
-Crane Operator for Craig Construction Co. at SCA tissue plant in support of expansion project. Operated large hydraulic cranes.
- Operating Engineer and design consultant for HOLTEC. Operated equipment and hydraulic cranes in support of Dry cask, which are the outside storage units for spent nuclear fuel. I also assisted in the design of a new plat form that could be installed on the HI STORM containers without the use of a crane, which saved the company thousands of dollars and several man-hours of labor on this particular project.
. Operating Engineer Supervisor at Browns Ferry Nuclear Plant in support of EPU project.
* Successfully completed outage on Unit 5 precip at Colbert Fossil Plant as Operating Engineer Supervisor.
* Operator for mobile Water Treatment System. Treated and neutralized over 1.8 million gallons of PCB contaminated water utilizing: Micron filters and Carbon filters and turbidity meters.
* Responsible for the operation and maintenance of 15 CAT D-8 and D-7G bulldozers for the Seabees. The dozers are a critical part of several naval operations including ELCAS, WESPAC, OPDS and BTU.
* Successfully completed 7 ELCAS constructions over a 3 yr. period for the US Navy. ELCAS is a 2500 ft. mobile docking pier and a critical step in getting supplies from ship to shore in a wartime situation.
* Was responsible for the setup and operation of beach transfer unit (BTU), which is the junction point for fuel coming onshore from the offshore petroleum discharge system (OPDS).
* As a civilian I have participated in the construction and completion of a new union hall for the IBEW L.U.558 and the construction of the Electrical Workers credit union here in Sheffield, AL.
* Have successfully completed 3 nuclear refueling outages at Browns Ferry nuclear plant both as an Operating Engineer and a Carpenter/Electrician helper.
* Held positions as Foreman/Temporary Lead Foreman on a security upgrade at Browns Ferry assisting in the excavation of over 5700 feet of duct bank, the erection of 15 security watch towers and the placement of over 350/ 33,000 lb concrete barricades and a pop up barrier.
* Assisted in the assembly of 73 mock up interceptor missile inside of a missile silo for Boeing GMD using a boom truck and supported combustion turbine rotor change out at Calpine Morgan Energy using 100T Linkbelt truck mounted crane.
* Excavated footing for an elementary school in Mombassa, Kenya during a humanitarian exercise with the US Navy.
* Excavated trenches for electric service lines for 25 HUD homes in Demopolis, AL.
* Worked as an Environmental Engineer and as a Water Treatment Specialist in the treatment of over 2 million gallons of PCB contaminated water and excavation and neutralization of over 750 tons of PCB contaminated soil.

WORK HISTORY:
-July08-Present, Operating Engineer and technician, Holtec, Browns Ferry Nuclear Plant
-June08-July08, Operating Engineer and Crane Operator, CR Meyers, SCA tissue plant in Barton, Alabama
-May08-June08, Crane Operator/Op. Eng. Foreman, Craig Const. Co., SCA tissue plant in Barton, Alabama
-May 08-May 08, Operating Engineer Foreman, Holtec at Browns Ferry Nuclear Plant
-Feb.08-May 08, Operating Engineers Lead Foreman, Shaw Group Inc. at TVA Browns Ferry Nuclear
-Feb. 08-Feb.08, Operating Engineer Foreman, Holtec at TVA Browns Ferry Nuclear
-Oct. 07- Feb. 08, Lull/Crane Operator Foreman, TVA Colbert Fossil Plant
-Sep.07-Oct.07, Heavy Equipment operator, Wheeler Dam/Bear Creek, AL
-Jul. 07-Sep. 07, Environmental Engineer, Clean Harbors, Waynesboro, VA
-Jun. 07-Jul. 07, Residential Electrician, T&J Builders, Huntsville, AL
-April 07- present, Freelance Close Protection Agent, Wade Executive Services, Florence, AL
-Oct. 06- Mar.07, Crane Operator, Operating Engineers LU 320, Florence, AL
-Jun. 06- Sep.06, Sales and Leasing Rep., Jerry Damson Honda/Nissan, Florence, AL
-Apr. 04-Jun.06, Carpenter/Electrician helper, Laborers International Union, Sheffield, AL
-May 98- May 06, Equipment Operator, United States Navy, ACB-1, NAB Coronado

EDUCATION:
-NCCCO through the International Union of Operating Engineers.
-Electrician Apprenticeship with T&J Builders in Huntsville, AL
-Successfully completed requirements for Engineering Inspector/Bridge Inspector for the City of Decatur, Alabama.
-Currently pursuing BS in Engineering
-Alarm Response Officer, BFNP, Apr. 2003
-NCTC Operator A school, USN, Oct. 1998
-NATTC Aviation Electronic Tech. A school, USN, Aug. 1998
-RTC Basic Training, May 1998
-Wilson High School, Graduated, May 1998 Florence, AL

ADDITIONAL INFO:

Environmental Equipment Operator: Frac tanks, Carbon Filters, and Micron filter baskets.
Close Personal Protection Specialist
Firefighter 1
Basic first aid/CPR
HAZMAT
OSHA-10
Equipment Operator: Dozers, Graders, Backhoe, Compactors/Compressors, Hydraulic and Pneumatic equipment, Dump trucks, Loaders/RT Forklifts, Low profile Forklifts, Rock Crushers
Crane Operator (up to 600T)
25T Tractor/Trailer operator
Radiation worker
Explosive Ordinance handler
Chemical, Biological, Radiological, Nuclear warfare decontamination
Surface Warfare, Seabee Combat Warfare, Marine Combat Warfare, Aviation Warfare

Affiliations:
Operating Engineers L.U. 320
Veterans of Foreign Wars Post #4919
American Legion post #11

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 3701 to 3750 of 4363)

Go to Search Parameters...

Brief Description

MBA with 5 Yrs of Pharmaceutical Experience in Sales and Marketing, Good Man Management skills, Team Management abilities, Target Oriented.

3 years of safety experience and seeking more.

Project Engineer Automation Controls Instrumentation PMP Certified 9+Years exp Plant Automation PLC SCADA DCS Project Manager CAP

Journeyed Industrial Electrician

Management, business, trading, oil and gas, adminstration, HR, petrolium

Experienced Electrical Superintendent seeking employment within the Australian construction industry, where hopefully my varied knowledge and experience can make a positive contribution to any prospective employers and also where I can continue to further develop myself within the business.

Project Engineer wit BSc of Chemical Engineering and experiences in oil and gas

Operating Engineer

Very good knowdledge in computeers and networking field. Good experience as Document Controller in Oil/Mechanical construction field.

Perform concurrent duties of a project manager which involve the management of several Aramco and non Aramco projects in close coordination with the client and/or his representatives and with the engineering design team

Mechanical Engineer with proficiency in IDEAS, Nastran

A dynamic accomplished Information Technology Professional with unique combination of experience in Networking and Hardware. Strong Analytical, Organizational and problem solving skills. Ability to identify Operational Deficiencies, skilled in applying Technology and Administration practices to impr

Mechanical engineering finite element analysis composites ansys Master's

3 Years of experience in Substation Automation field. Worked with Areva, ABB, Siemens & GE systems.

Time served pipefitter with 12 years experience.

PLANNER SMELTER

Very good exp on Document MAnagement, Administration and Trouble shooting.

Mud engineer/ mechanical engineer/ hse advisor/ compliance and standard/ maintenance supervisor/ general inspector and supervisor

I completed my Master in Business Administration, and have more than eight years working experience in the mining industry.

AutoCad Mechanical Desktop AutoCad Inventor 3D Modeler

PDMS-11.6, PDS-7.1, Autocad-2006, CAEPIPE 5.11, Pro-E Wildfire2.0

E&I Materials Coordinator

Quantity measurement by SMM7 in my spreadsheet program, BoQ maker, also Project Monitoring in Quantity and Costing.

analyst

certificate of proficiency in general construction carpentry[framework/formwork infastructers/ concrete finishing/ steel fixing

Skills summary: Gas and Oil Separation Plant (GOSP), Produced Water Treatment Plants, Installation of diesel Engine Power plants, Mechanical construction works such as Piping, tanks, Ducting, structurals, etc.

Recruitment, Performance Managent, Organizational Development, Manpower Planning, Training, Succession Planning, Employee Relations, Compensation and Benefits, Policies and Procedures and Grievance Handling, Labor Union Negotiation and Admin functions

Windows 2003 Server, ADS, DNS, DHCP, Unix Admin

BSc Computer Science (Mains :- Computer Science, Physics & Mathematics ),One Month Course in Fire & Safety Engineering from Bharath Petroleum Kochi Refinery,BCFE [Basic Course in Fire Engineering], Done 24 days training in Industrial Fire Fighting from Kerala Fire & Rescue Service (Kerala Fire

As an HSE professional of almost twelve years, along with my extensive Onshore Oil/Gas, power plants, fabrication shop, petrochemical plants background.

Bachelor of Engineering (Electronics & Communication) ,A.I.V.,A.M.I.E.

P&PCM, MBA, B.Arch

I am holding Diploma in Electrical engineering. In total have 7years of experience, 2.5years in Enginnering Industry and 4.5 years in Cement Industry

I am an Instrumentation Technician and Instrument/gas fitter with oil,gas, and industrial experience. Skills: AC/DC generator, chemical injection, I&C, PLC, panel tech, compressor, automation, integration, etc.

Degreed Electrical Engineer with Pro/E Wildfire 2.0 and Pro/Cabling training

My 19 years of experience reflect 13 years of project detailed engineering as a Control & Instrumentation Engineer and 4 years in maintenance and upgrade projects in a reliability based environment, applying amongst other the following typical standards and practices: ANSI, IEC, BSA, DIN, API

Piping, PDS, PDMS, PSDS Designer Over 9 years experience in the field of Mechanical, Piping Engineering Design / Drafting and Construction. A variety of successful projects for power, industrial, chemical, petrochemical, oil & gas, refinery, pharmaceutical and cement plants.

Security professional experienced in managing and leading national level preventive and response operations and operating as part of a larger international framework to manage complex events, travel and accommodation security details for VVIPs.

MSHA Certified, 5+ years construction trade experience, experienced heavy equipment operator, bilingual (spanish/english)

Skilled Communicator Seeks Marketing and Business Development Position

10 Years Working As A Cartographer For QARUN Petroleum Company

Pre-Commissioning of pipelines, Decommissioning Platforms GOM, Project Management

Electration Engineer Trainee

Electrical Engineering, Computer Hardware, Quality Assurance/Quality Control, CMMS

Professional career spans 12+ years in field of Construction,contract and project management, strategy formulation (for high spend areas), strategic sourcing and supply chain process reengineering.

Electrical Engineer

Instrumentation project management/Instrumentation designer

MBA, experience in Clients relations and mutual fund industry.

Passed Bachelor of Engineering in 2002 and then completed my MBA. I am working as a senior design engineer in Instrumentation & automation field of Larsen & Toubro Limited organisation.

Management Graduate with Bachelors in mining engineering, excellent knowledge of SAP, Internet, Microsoft office etc. Sales in Oil and Gas, Energy sector, Training Expert. Good experience of handling people.

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 [ 75 ] 76 77 78 79 80 81 82 83 84 85 86 87 88 Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out