Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #7430 next resume »»
CONTACT INFORMATION:
View contact information...

RESUME

Date of Birth: 15.06.1972
Nationality: Indian
Marital Status: Married

Languages Known: English, Tamil, Malayalam and Hindi
Professional Qualification: B.E. (Electrical & Electronics), 1St Class, ( 1994 ), Annamalai University, Chidhambaram, Tamilnadu, India
In-plant Training: Thermal Power Station-II (7x210MW), Neyveli Lignite Corporation Limited, Neyveli.
Computer knowledge: MS-Office, Prema Vera, MS Project, Basic, Forton, Cobal & C.
Work Experience:
10 Years in Electrical, Instrumentation & Cathodic Protection. Specially in Erection, testing, calibration of instruments, loop checking, sequence checking, pre-commissioning, Commissioning, Design verification, QA/QC, Project management, Billing and handing over of various projects like EHV Sub-Stations, Transmission Lines, Oil & Gas Industries, Power & Desalination Plant, Cathodic Protection of Oil / Gas well casings with flow lines & sea water pumping station as site engineer, Project Engineer & Project Management Consultant.
UAE Driving Licence No, Type & Validity: 394853/T, Light Vehicle, From 01/08/2004 to 31/07/2014

DETAILED WORK EXPERIENCE

September 2003 to till date: VECO Engineering, Abu Dhabi, UAE.

Position: Project Management Consultant ( Electrical & Instrumentation ) - PMC Team Member in a seven member team
Project Value: 57 Million USD
Job Responsibilities:
Permit to Work ( PTW ): Completed PTW course arranged by ADCO. Working as job originator for issuing/closing permit to work (PTW).

Design verification as per contract specification, Quality procedure/Inspection test plan evaluation / preparation comments & implementing, Verification for cable trench route/anode ground bed location, Inspection as per ITP, issuing & closing CAR, Quality control & Quality assurance in accordance with ISO: 9001 Quality system, schedule Implementation, Progress monitoring, Internal Electrical/Instrumentation Auditing ( Preparation of punch list & punch out after completion ) & Preparation of progress/technical reports/correspondences with contractor and client for Erection, Testing, pre-Commissioning, Commissioning, including handing over for Cathodic Protection of 1311 Oil & Gas wells with connected flow lines using Solar Panels & battery bank, Transformer rectifiers at ASAB, SHAH, SHAGIL, HABSHAN & BU-HASA Oil fields of Abu Dhabi Oil company for onshore operations ( ADCO ) in Abu Dhabi.

June 2003 to August 2003: Galfar Engineering & Contacting Co.L.L.C, Oman.
Position: Electrical & Instrumentation Engineer

Job Responsibilities:

Erection as per P&I/hook up drawings, Testing, pre-Commissioning, Quality control & Quality assurance in accordance with ISO: 9001 Quality system including Project Planning, Scheduling, Implementation, Inspection, Internal Instrumentation Auditing ( Preparation of punch list & punch out after completion ) & Preparation of progress/technical reports for 29 Bore well network with 3 ground reservoir, 2 pumping station, 12 elevated tanks Ash" Sharqiyah Sands Main Water Supply Project for drinking water distribution system at Al-kamil area in sultanate of Oman using PLC/SCADA system interconnected by 140 km FOC Cable.
Independently supervised the cable laying, straight through / end splicing, checking of FOC cables using OTDR & power meter & installation, termination, checking of float/ultrasonic/conductive level transmitters, flow transmitters, pressure transmitters, motor operated valves, PLC panels, SCADA panels & networking for SCADA.

Courses completed:
* CEP ( Competent Electrical Person ) Course
* HSE Induction
* H2S Awareness and Escape
* Permit to Work System (Signatories Course)
* Job Hazard Analysis
* Basic Fire Extinguisher
* Enhanced Site Supervision ( ESSW)
* Supervisory Safety
* Incident Investigation and Reporting
* STOP … for Safety
* H2S, O2, Hydro Carbon Gas Testing
* Refresher course on Quality Control / Quality Assurance in accordance with ISO: 9001.
March 2002 to May 2003: Hitachi Zosen Corporation, Oman.
Job Value: 175 Million USD
Position: Electrical & Instrumentation Engineer

Job Responsibilities:
Erection as per P&I/hook up drawings, final onsite calibration of instruments, loop check for instruments, sequence testing, Testing/Commissioning, Quality Control & Quality Assurance in accordance with ISO: 9001 Quality system including Project Planning, Scheduling, Implementation, Inspection, Internal Electrical & Instrumentation Auditing ( Preparation of punch list & punch out after completion ), Preparation of progress/technical reports for AES 20 MGD Desalination plant in sultanate of Oman with electro chlorination plant, Seawater Screening/Pumping Station, Acid cleaning, Chemical Dosing ( Inhibitor), 3 no Evaporators & Remineralization plant with the following equipments With 90,000 Metres of electrical cables & 60,000 Metres of instrumentation cable laying /termination work.
* 9X1000 kva, 11kv/415v Transformers for Auxiliary power supply.
* 3X1500kva, 11kv/288v Transformers For Chlorination plant rectifier (Toshiba)
* 6 No's 11kv panels (ABB)
* 7 No's LV Distribution panels (Togami-Japan)
* 2 Set's of Battery charger/Battery bank/ups (Guttor)
* 16 no's 11kv motors (Ansaldo)
* 8 no of Cathodic Protection Panels with anodes & reference cell.
* 45 No's of small control panels (Togami)
* HVAC for 4no's SWGR Buildings (Blue star)
* Fire fighting & Fire alarm installation for the whole plant.
* 1 No Local Control Panels with PLC (Siemens) & AC Drives (ABB) for sea water bar/band screening system with pumps for drainage/feed water pumps to chlorination plant.
* 3 no Local control panel with siemens PLC for evaporator tube cleaning system.
* Five No DCS Panels (ABB) for sea water pumping station, 3 no evaporators & remineralization plant.
* Pressure, flow, temperature, level, & position transmitters, MOV, Analyzers.
* Airline & Impulse line work.
November-2000 to January- 2002: BALMER LAWRIE & Co. Ltd. (A GOVERNMENT OF INDIA ENTERPRISE)
Corporate Planning & Project Division, Kolkatta, India.

Position: Site Engineer ( Electrical & Instrumentation ) for Total responsibility Consultancy Service

Job Responsibilities:

Design verification as per contract specification, Quality control & Quality assurance in accordance with ISO: 9001 Quality system, Project Planning, Scheduling, Implementation, Inspection, Internal Electrical/instrumentation Auditing ( Preparation of punch list & punch out after completion ), Preparation of progress/technical reports, erection as per P&I/hook up drawings, final onsite calibration of instruments, loop checking, sequence testing, pre-commissioning, testing / commissioning and assistance to get the CEA, Pollution control board clearance & State electricity supply As Total Responsibility Basis Consultant for the following Indian Oil Corporation EPC Projects.
( Independently completed the electrical & Instrumentation works in the following projects )
* IOCL LPG Bottling plant project at Mannargudi, Tamilnadu, India.

* IOCL POL Depot project at Gulbarga, Karnataka, India.

* IOCL AFS station project at Trivendrum, Kerala, India.

December 1998 to October 2000

:

Bombay Suburban Electric Supply Ltd (Contracts Division), Chennai, India. ( BSES )

Position Site In charge (NLC Sites)

Responsibilities:

Independent Complete Supervision for Erection, Testing & Commissioning of EPC contract 110 KV double circuit over head transmission tower line work with single poles and double pole structures ( Re-routing of 33 KV head lines at Mines – I ) including shut down & re-routing, Quality control & Quality assurance, project Planning, Scheduling, Implementing, Progress Monitoring, progress reporting, billing/following payments from client, checking sub-contractor invoice & handing over to client at MINES – I, Neyveli Lignite Corporation Limited, Neyveli, Tamil Nadu, India. (A GOVERNMENT OF INDIA ENTERPRISE)
Total Co-ordination like tender submission, Technical / Commercial bid evaluation, planning and scheduling, manpower/material arrangements to execute the project, overall erection supervision, Testing & Commissioning and handing over the project as per the EPC contract terms and conditions at Neyveli Lignite Corporation Limited, Neyveli, Tamil Nadu, India. ( A GOVERNMENT OF INDIA ENTERPRISE )

* 230 KV one bay expansion in thermal power station – II switchyard.

* Supply & Erection of 2 no of 750 KVA diesel generators at thermal power station I expansion site.

* Supply & Erection of 11 KV outdoor kiosks and 11KV XLPE cable laying in thermal power station I expansion site.

June 1994 to November 1998: TECHSER Engineers. ( ESA Contractors & consultants, Chennai, India )

Position: Project Engineer

Job Responsibilities:

Independent Complete Supervision for Erection, testing & commissioning of following projects including Quality control & Quality assurance, project Planning, Scheduling, Implementing, Progress Monitoring, progress reporting, tendering for further projects, billing, following payments & handing over for the following Projects at Neyveli Lignite Corporation Limited, Neyveli, Tamil Nadu, India. ( A GOVERNMENT OF INDIA ENTERPRISE )

* 230/11kv, 6x30MVA Sub-Station in Mines-I

* 33/11 kv, 4x20MVA Sub-Station in Mines –I

* 33kv O.H Line (10km) in Mines-I

View contact information...
«« previous resume next resume »»
Search Results (Resumes 2651 to 2700 of 4331)Go to Search Parameters...
Brief Description
Civil Construction & Contracts Manager
Experitse in geophysical surveys, geotechnical, hydrogeological investigations, environmental and engineering applications as well as software development using VB.
Seeking a responsible and challenging growth oriented position in the field of electrical engineering with emphasis on high voltage out-door substations including its preliminary design, selection of transformers, switchgears and other materials
Civil / Structural Engineer with various international exposure on Power Generating structures, knowledgable with design and detailing software such as StaadPro. and Tekla Structures.
Construction experience in the HVAC Mechanical field to include 2 years managing personnel in plumbing, heating, and sheetmetal. Lead multiple projects at a time ranging from $100K to $1M plus, from start to end with very positive outcomes.
Presently working as “Finance and Administration Executive ” in Saudi German Hospital Group, Construction Division, Jeddah KSA
SAP Basis Consultant 2. MS Exchange Administration
Electrician, Air Conditioning & Refrigeration Mechanic with Industrial, Commercial and Residencial Experience, Currently working for an Industrial Switchgear and Automation specialist in the Electrical Industry as a sales engineer.
Instrument Engineer / Supt
MECHANICAL ENGINEER WITH 2+YRS OFFSHORE EXPERIENCE IN SUBSEA PIPE LAYING,TIE IN AND RISER INSTALLATION,SBM AND PIPING INSTALLATION
Working as Engineer involved in Design and Commissioning of PLC/DCS Panels & logics and HMI/SCADA systems and Customize Reports. Engineering on multiple communication networks and protocols.
A mechanical design engineer, experienced in prototype packaging, embedded systems programming, optical integration, cryogenic environments.
A Senior Land Surveyor/ Data Manager with 17 years experience on large infrastructural projects. Diverse 3D mapping and engineering experience using MicroStation, AutoCAD, MX, InRoads and Surveying software packages. A provider of survey, design and CAD support services for tenders and projects.
Graduate Diploma In Materials Management. Warehouse & Purchase activities are handled by me indepandently.
D/MAN CIVIL., AutoCAD2D & 3D
Mechanical Engineer
Over 15 years of rich experience in Project Execution & Management, & Engineering in oil and gas.
Objective: To obtain a challenging PDMS / PDS piping designer position in energy industry.
PRO-E DESIGN ENGINEER
To peruse the growth enrichment of career in envious of professional with an emphasis on computer based “Planning & Construction Management”
New Graduate looking for a entry level position.
branch=EEE location=anywhere salary=asp per qualification jobs=permanent
Project Manager specialising in the shopfitting/fit out sector
Systems Engineer, Catia, Solidworks, stress calulations
Professional Heavy Equipment Operator rated with Class B+, Professional Driver for both cars and Heavy Vehicles, Knowledge in Purchasing, Surveying.
piping design, supervision on large projects, estimating/cost and budget control
More than 30 years experience in the field of General Engineering, Plant Maintenance Management, Project Management, Telecommunications, Electrical/Instrumentation and Process Control.
Mechanical Engineer, Project Engineer and Project Management Services
A highly educated and experienced project controls specialist looking for a position in project controls, planning and scheduling and cost estimating
Passionate, experienced and Qualified. Development and implementation of safety management systems. Skilled investigator with anlytical skills to achieve preventative outcomes. Behavoural management specialist with a hands on approach and background.
10 Years in Electrical, Instrumentation & Cathodic Protection. Specially in Erection, testing, calibration of instruments, loop checking, sequence checking, pre-commissioning, Commissioning, Design verification, QA/QC, Project management, Billing and handing over of various projects like EHV Sub-St
BS Mech/Indust Eng. Trade qualified: Marine Eng & HD Mech. Member: "Intl Assoc Airport Executives (Can.)" & "Inst of Transportation Eng (Can.)" Extensive o/seas experience as project engineer in frontier/conflict regions.
An experienced engineering manager, project manager, and program manager with Department and Division operations experience at engineering and construction, and consulting firms. Experience in multi-disciplinary infrastructure projects and environmental remediation.
Constructional Blasting, Quarry work, Coal Mines
Sr. Project Controls Specialist
Cad Engineer
Telecom,telecommunication,engineer,engineering,communication,telecom and IT,WIRELESS COMMUNICATION,OPTICAL FIBER
Six years of experience in execution of maritime jobs like Construction of Rubble mound breakwater (for Naval Base & LNG Project ) Jetty ( Ethylene Terminal & LNG project) and Berths ( for LNG loading )
Water & Wastewater Specialist searching for a challenging position overseas.
Ten years experience in design, construction, water, wastewater treatment plants, buildings, roads, Certified in Occupational Health and Safety Canada, AutoCAD, B.E. Civil, and ME Environmental (Public Health) Engineering, Valid Ontario class G drivers license, Water Treatment Plant, Water Distri
Objective: Team player on a challenging position with utilization of my skills and knowledge developed through trucking industry.
Basically I am a networking engineer. Can do any work related in computer field and can install most of the software, can assemble computer.
Production, Laborer, Auto Detailer, Assembly
Project Engineer, 3 years experience, previously a shop detailer, very competent in StruCad and Autocad. Have worked in remote location, on a 4 & 1 FIFO roster on night shift
Excellent theoretical and practical command of planning, performing, evaluating and controlling administrative and commercial activities of a public as well as a private order. Vast experience of administrative management of projects and construction of civil works.
Java Servlets, JAVA, ASP, VB, ASP.NET, C#.NET, VB.NET,JSP, JavaScript, XML, AJAX,Oracle, MS SQL Server, MS Access ,IIS, Apache
MEng. In Mechanical Engineering,career as a Sales Executive Manager,Capable of using Microsoft Word, Excel, Power Point, also Enterprise Resources Planning SAP R3, Graphic software Adobe Photoshop, Auto CAD. communication,leadership,work in both team-oriented and self-directed environments
Open Crane Operator and Advanced Rigger
Dynamic, self motivated and team player
Power Plant Operation And Maintenance Management
First   Prev   51   52   53   [ 54 ]   55   56   57   58   59   60   61   62   63   64   65   66   67   68   69   70   71   72   73   74   75   76   77   78   79   80   81   82   83   84   85   86   87   Last
Seach Parameters

Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help
» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email
» My Account
» Log In
» Log Out
 
©1999-2008 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com