Resume - Chartered Safety and Health Practitioner (CMIOSH) working lately as High Risk HS...

Misco Jobs

Resume #74437

CONTACT INFORMATION:
View contact information...

Personal Information
Date of Birth: 15 October 1950 Address: Supplied on request
Nationality: British
Driving Licence: Full Current Licence
Health: Good
Status: Married

Synopsis
My experience stems from high risk industries such as Offshore Oil and Gas, Land based Seismic, Construction build and roadwork's, Nuclear, Transco, Domestic Gas, Civils reinstatement, Grounds Maintenance and Electronics and Communications contracts.
After serving on a mobile Seismic Crew in Libya, I completed 2 years as the company's Corporate HSE Supervisor prior to becoming an HSE Consultant for the Oil and Gas Industry.
I am a Chartered Safety and Health Practitioner (CMIOSH) and a corporate member of IIRSM(MIIRSM).
Note: I have held Top Secret Clearances, and presently hold the following:
Clearance: SC Clearance Ref: 1222634/1 Expiry: 12/08/2014

Safety related Courses / Qualifications:
2008 Booked on an IRCA Lead Auditors course in September
2006 Qualified R.A.T.L.S (Remote Area Trauma Life Support)
2005 Qualified CSCS Platinum H&S Manager (Construction) NVQ level 4
2005 Qualified NVQ 4 in Occupational Safety and Health
2005 Qualified in Confined Space Entry - provider ALSTEC Training Services
2005 Qualified in Environmental Management Systems - provider CIEH
2005 Qualified as AP (Authorised Person) Permit Officer - provider ALSTEC Training Services
2005 Qualified in Manual Handling - provider ALSTEC Training Services
2005 Qualified as COSHH Assessor - provider ALSTEC Training Services
2005 Qualified Risk Assessor - provider ALSTEC Training Services
2005 Qualified LOLER Appointed Person - provider Onsite Training Services
2004 Qualified in Manual Handling Plus - provider Cardinus
2004 Qualified in Health & Safety Essentials - provider Cardinus
2004 Qualified in Fire Safety Plus - provider Cardinus
2004 Qualified in Workstation Plus - provider Cardinus
2004 Qualified in Manual Handling - provider MoveIT
2004 Qualified in Display Screen Equipment Assessment - provider Birbeck College
2004 Attended IS-195 Basic Incident Command System course
2003 Attended Accident/Incident Investigation course - provider Enterprise plc
2003 Qualified NEBOSH General Certificate (Overall Credit 3-4-2) - provider RGIT
2003 Qualified IOSH Managing Safely - provider Enterprise plc
2003 Qualified ECDL (European Computer Driving Licence / 7 units) - provider Inverness College
2002 Qualified NCFE NVQ2 Dealing with Accidents - provider South Tyneside College
2002 Qualified NCFE NVQ2 Risk Assessments - provider South Tyneside College
2001 Fire Safety course - including breathing mask 'team' escape through smoke filled building - provider RGIT
2001 Qualified Generel Certificate Global Maritime Distress and Safety Systems - provider Leith College
1988 Fire and Safety course
1975 HND Electronics & Telecommunications
1969 Fire and Safety course - intensive fire-fighting training including entry into a two story metal building (with breathing apparatus) in order to extinguish an oil fire - provider Royal Navy
1967 Gas Safety and NBCD (Nuclear Biological Chemical Defence) Training - provider Royal Navy
1966 Fire and Safety course (intensive fire-fighting training) - provider Royal Navy

Employment History:

2007 and 2008
Employed by HSE Consulting Companies – See page 3 for details of positions with various agencies as a HSE Consultant, I am able to provide HSE to any company that requires my assistance. This includes jobs such as HSE Client Representative; Audit planning, execution and report writing; Project Management; Implementation of HSEMS; HSE evaluation; Provision of HSE training (all subjects).
My construction build and roadwork's experience allows me to pursue a wider field if required.

2005 Employed by AGESCO
As HSE Supervisor at AG-01, Head Office – Tripoli, Libya (frequent trips to the field).
In charge of all aspects related to Health, Safety the Environment and Emergency Response including the provision of Safety Instruction.
Initial requirement at start of employment was to raise the standard of one mobile Seismic Survey Camp.

2004 Employed by ALSTEC Ltd
As Health and Safety Advisor for the Principal Contractor, this position required me to deal with all safety matters including the preparation of the Health & Safety Plan, during the Enabling Works and subsequent construction of a Containment Building at Dounreay.

2004 Employed by Marconi Government & Defence (CDM Regulations apply).
As Health and Safety Advisor, this position required me to visit multiple RAF sites within the UK in order to implement all aspects of Health and Safety.

2003 Employed by Rand Road Surfacing (Construction Company).
Updating and developing Health & Safety documentation for Rand Road Surfacing (construction company),
Netherton, Liverpool. This was an extensive duty and required me to develop their Health & Safety Management System, which included the following: Health & Safety Plan, Health & Safety, Environmental and Quality
Policy Statements, Method Statements, Risk Assessments, Gang Packs, Pre-contract package, Accident / Incident investigation and reporting package, and a full training package containing company induction, and over 60
toolbox talks.

2003 Employed by Lafarge Contracting (Construction Company).
Responsible for all Health & Safety duties, i.e. giving inductions, toolbox talks, safety audits, writing risk assessments and preparing the Construction Health & Safety file. I was involved in several road surfacing contracts in which heavy duty vehicles, machinery, equipment and plant were used for civils, planing, cleaning, tack-coating, laying of tarmac, road cutting, white lining and reinstatement of cats eyes and gully's. I assessed and rectified numerous 'Near Miss' reports and on several occasions, observed and initiated them myself.

2003 Employed by Enterprise as HSE & Q Manager for Scotland.
Responsible for all Health & Safety duties, i.e. giving inductions, toolbox talks, safety audits and writing risk assessments. I concluded around ten full accident investigations from notification of accident through to completion of the final report; On several occasions it was necessary for me to (also) complete and forward
RIDDOR reports to the Health & Safety Executive.

2002 Employed in the control room of jack-up rigs Rigmar 301 and Ensco 85.Responsible for marine and helicopter safety and emergency response.

2001 Employed on Ninian South, Beryl Bravo and Santa Fe 135.
Responsible for marine and helicopter safety, and involved in emergency response.

1998 – 2001 Employed by MOD
Telecommunications, teaching, laboratory work, analysis and technical report writing.

1996 – 1998 Seconded to the Foreign Office
Working in the Middle East as a security advisor including certain aspects of safety.

1975 – 1996 Employed by MOD
Telecommunications, teaching, laboratory work, analysis and technical report writing.

1974 Employed by Thomas Gill Yarn Weavers
Involved in all aspects of manufacturing and factory work during this short period.

1966 - 1974 Royal Navy – Frigate, Shore Based and Submarines.
Involved in communications, radar, working at heights, confined space entry, man-overboard exercises, submarine escape, fire-fighting, gas attack exercises, Nuclear Biological Chemical Defence (NBCD)
exercises and emergency response.

Detailed work as a HSE Consultant - Oil and Gas and Exploration.

February 2007 – March 2007
I audited the Health, Safety and Environmental Management Systems of a Chinese Seismic Crew in Syria, and completed a full audit and inspection report for their Head Office in Beijing.

April 2007 – May 2007
I served 4 weeks north of Palmyra, Syria and successfully raised the standard of HSE on a Croatian Seismic crew.
I wrote site-specific plans for the following:
1. HSE Plan
2. Emergency Response Plans (Fire, MEDEVAC, Emergency Spill Control and Man Missing / Lost Procedures).
Note: This plan was also written so that the last 4 chapters plus the Emergency Telephone numbers could be put into a soft-backed folder and left by the exit of all doors and also kept in vehicle glove compartments.
3. Environmental Management Plan
4. Waste Management Plan (the client wanted this separate from the Envirionmental Management Plan)
5. Sub-Contractor Mangement Plan.
Once these were written, my main job was complete, however, I was extended in order to train 3 HSE Advisors, raise the standard of safety on-crew, i.e. fencing, signage, emergency drills, and I gave 40 personnel Fire Theory and Practical Training in the use of CO2, Foam and Dry Powder extinguishers and I also demonstrated (with volunteers) the use of a Fire Blanket.

June 2007
I served 2 weeks in Area 186, Kufra, Libya working for a Croatian Seismic crew by bringing their HSE standards up to an acceptable level. Training was given in various HSE subjects including Fire Training (theory and practical), JSA's and site-specific Risk Assessments.

July 2007 – December 2007
I completed 2 hitches (13 weeks total) in northern Sudan working as a HSE QC for South African Oil Company while working on a Chinese Mobile Seismic Crew. This included Pre start-up audit, continual monitoring / review of contractor including 'working to their own HSE-MS', detailed daily reports and input to the final report.

February 2008 – March 2008
This was a 'one off' assignment in Chekovskaya, Siberia working for a Major Russian Oil Company while on a Mobile Seismic Crew. Environmental conditions to -20 degs C.

Detailed work as a HSE Consultant – Oil and Gas Industry (Land).

May 2008 - June 2008
I concluded the writing of HSE Documentation for an Oil and Gas Exploration and Production Company in the Sulatanate of Oman. This included two visits to the field to do both assessments and a subsequent Incident Investigation and Report. The documentation included a HSEMS (154 pages), HSE Plan (11 pages), HEMP (43 pages / 36 HEMP's), Emergency Response Plans (38 pages), Training Matrix (1 page) and various supporting forms and procedures.

July 2008
Completed a 3 week project in the Sultanate of Oman for a subsidiary of the same company. The project entailed work on a Drilling Rig and the writing and implementation of HSE documentation for Blocks 45 and 48.

Note: A further visit for another department within this company is scheduled for September / October 2008.
Note 2: During this period I will be taking the IRCA Lead Auditors examination.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1151 to 1200 of 4351)

Go to Search Parameters...

Brief Description

Pursue a career in the, Chillers Systems, Refrigeration, Air conditioning,

Knowlegeable on 2D&3D AutoCAD Drafting, ArchiCAD, Vectorworks, Photoshop, Office Apllication, - Word and Excel, Outlook , Internet, Manual and Computerized Rendering, Mechanical/ Conveyor Technology (as per ASTM, ISO, JIS, and Other Drawing Standards), well versed on the English System Units.

Electrical Project Manager 20+ years experience

Have worked in all departments of construction project sites, well knowledge in computers

Licensed Civil Engineer, exposure to project / construction management for 8 years, assigned to do field and office engineering works like field inspection, work monitoring, and cost estimates for 3 years, familiar with basic forms of contracts-FIDIC, CIAP, computer literate - MS office application

I¡¦m a B.E.,(Mechanical Engineering) graduate, graduated from Bharathiar University, Coimbatore (South India) with First class during the year 1992. I have a rich 12+ years of experience in various fields mainly in the area of projects Execution.

I AM A MECHANICAL ENGINEER WITH 8 YRS EXP IN MANAGING PROJECTSITES AT BPCL,IPCL IN INDIA,FABRICATION AND ERECTION OF PIPELINE,MAITENANCE OF PIPELINE ERECTION OF EQUIPMENT PRESENTLY IN DUBAI ON VISIT VISA AND LOOKING FOR EMPLOYMENT IN UAE.CAN SPEAK BOTH ENGLISH AND RUSSIAN LANGUAGE.

Target oriented professional with excellent leadership skills, proactive attitude and mastering strong inter-personal relations with people of different cultures.

worked as junior engineer on various projects around the world. Adapt easily to harsh conditions.

I am searching for employment with a company that has satiability and longevity.

Total Experience is of twelve Years encompassing Senior Civil Engineer for Eight Years and Site Engineer for Five years and as a professional experience in Project engineering for Major Construction Projects in the Middle East & India.

To obtain civil engineering employment in an environment that will encourage the growth of a young, enthusiastic engineer.

Quality control engineer, welding inspector, level ii in rt,pt,mt,ut, and cswip 3.1

Transmission line / Substation Construction supervision

I can easily get along with my co-employees and having a good interpersonal skills like communicating to other people. I can drive. I can surf the internet / ms-office.

Presently working as an Electrical Engineer Professional

Bsc (Hons) Civil Engineering. Incorporated Engineer and Member of the Institution of Civil Engineers.

20 yrs exp residential contractor

Interest in Architectural/Construction Design and Engineering Document Control - Background experience in Aluminium Company and Electronics Production and Engineering - With excellent knowledge in Excel, Word, Powerpoint. Basic knowledge in Autocad

Professional-2 yrs experience

Graduated from ESITC Metz, a leading french civil engineering school

I Hold a BSc in Quantity Surveying and am working towards a Masters Degree in Project Management. In terms of skills, i do Assisting projects manager in overseeing the whole construction process from site acquisition, contract documentation, tendering, adjudication, award, supervision, commission a

I am a CNC Operator and I can work through master cam or manual programming

T&I, Commissioning, scheme verification and Maintenance of Switchgear and Protection system in Refineries, Power Plant, NGL plants, Gas and Oil Exploration/producing/Separating Facilities, Oil and Gas well areas.

M.E. Civil in Transportation Engineer with I-Class

Master of Engineering degree (Civil), Canada, Interim member of P.eng and OSPE, member of ITE(USA).I also completed real estate examination from Onatrio Real Estate Association. Extensive experience working with wide range of local & international consultants, contractors,municipal &, semi

Passed out Diploma in Instrument Engineering through NATIONAL POLYTECHNIC from July’ 1993 to May’ 1995

Heavy equipment operator over 20+, Body Work and Custom Paint 20+ and Welder 10+

Sales, Client Development, Recruiting, Human Resources, Customer Service

Implementation Manager or Technical Project manager

Interprets plans, conducting quality control as inspector, preparing welding procedures as a welding engineer, and controlling/monitoring project activities/ preparing documents for the fabrication of boiler components shall hopefully contribute to your requirements.

I am Design Engineer. My most recent experience was design an automatic steel strip coil tensioning and recoiling line . I was responsible for the overall product design, workshop drawings and hydraulic and pneumatic circuits. I developed the first draft of the operator's guide.

for a vacancy in your organization for Quantity Surveyor / Civil Engineer.

Five years experience as a Journeyman Boilermaker, working as a welder, rigger and mechanic. I also have 18 yrs. experience in glass manufacturing where I started as a maintenance mechanic and worked my way up to batch and furnace Dept. manager.

With more than 12 years in Petrochemical and Paper industry and in various positions and discipline.

I have been in electrical construction for 12 years, 3 years in management of electrical construction. I am interested in working overseas for short or long term projects. Please call with any interest.

12 YEARS EXPERINCE IN CIVIL/STRUCTURAL ENGINNERING EXPERIENCED IN USING BS AND US STANDARDS. POWER PLANTS, OIL AND GAS, DE-SALINATION PLANTS, SUB-STATIONS, SVC PLANTS, TANK FARMS, AND VARIOUS OTHER INDUSTRIAL STRUCTURES.

Hard working person can easily adopt the environment and fast learner can also learn different fields of work and I am also willing to learn more for me to grow more as an individual

GIS,Automated Mapping and Drafting; Mastering GIS principles and techniques

As a Laboratory Technician I have learned and trusted to operate the On-Site Analyzer machine, a first of its kind in my previous company. I also had an experience as a Vehicle Inspector Technician of both Heavy Equipment and Light Vehicle. From this, I become accustomed to maintain equipment and v

CAD Software : SolidWorks, AutoCAD, Pro-E, WildFire, Ansys, SolidEdge, Revit,TurboCAD

Certified journeyman plumber/pipefitter with overseas experience willing to travel

ELectrical Design Engineer

I have experience in handling personnel working on distribution lines. I can easily adopt to work environment related to Electrical Engineering.

Department of Translation, Qualification of Interpreter –Translator; IT Application Specialist

Telecommunication & IT Engineer

Professional Electrical Draughtsman with excellent Gulf experience in several Electrical Projects in various positions.

HND Architecture, PGD Architecture, MBA

Chartered Safety and Health Practitioner (CMIOSH) working lately as High Risk HSE Consultant in the Oil and Gas Industry

Welder-Fitter, CWB Supervisor, Millwright, CPR, First Aid,

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 [ 24 ] 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out