Resume - Professional Engineer experience in cleanroom design, construction, installation...

Misco Jobs

Resume #7622

CONTACT INFORMATION:
View contact information...

RESIDENCY INFOMATION
------------
Permanent Resident of Australia
------------

SPECIALIZATION
------------
Design, construction, installation, testing and commissioning of cleanroom HVAC and architectural works.
------------

SUMMARY OF QUALIFICATIONS:
------------
- Certified Energy Manager, Energy Centre of Malaysia
- Bachelor of Engineering (Mechanical Engineering)
- Master of Science (Project Management)
------------

EDUCATION & CERTIFICATION:
------------
- Buxton University (1998 to 2000) Master of Science (Project Management)
- Monash University (1985 to 1988) Bachelor of Engineering (Mechanical Engineering)
------------

PROFESSIONAL AFFILIATION
------------
- The Board of Engineers, Malaysia, Professional Engineer (Registration number: 8140)

- Engineers Mobility Forum (EMF), International Register of Professional Engineer (Registration number: MY E88)

- Asia-Pacific Economic Cooperation (APEC) Engineers, APEC Engineers Register (Registration number MY A88)

- Asean Federation Of Engineering Organisations, Asean Engineers Register (Registration number 045)

- Fellow of The Institution of Engineers, Malaysia, (Registration number F11493)

- Corporate Member of The Institution of Engineers, Australia, (Registration number 2450323)

- Senior Member of Institute of Environmental Sciences and Technology, USA, (Registration 49589)

- Member of American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc, USA, (Registration number 05145772)
------------

WORK EXPERIENCE:
------------
Kejuruteraan Bintai Kindenko Sdn Bhd (May 1989 to May 1994)
Last position held: Senior Engineer

Kejuruteraan Bintai Kindenko Sdn Bhd (KBK) is a Japanese based MNC involved in the building and facility services. Before leaving KBK in 1994, I mostly was responsible for the conceptual design and system planning, project cost control, implementation and installations of mechanical and electrical as well as manufacturing process controls for commercial and industrial clients.

Mtract Development Sdn Bhd (June 1994 to June 1999)
Last position held: Head of Department, Assistant General Manager

Joined Mtract Development Sdn Bhd (MTDSB), a wholly owned subsidiary of Arab-Malaysian Corporation Berhad in the capacity as Acting Project Manager in 1994. I am instrumental in the development and support for engineering projects within the group. My core tasks assisted by our team of managers, engineers and executives are in development conceptual, planning, budget and cash flow forecast, capital and cost management, liaisons with authorities such as Ministry of Finance, Excise and Custom department and etc. Our tasks included analysis and evaluation in effectiveness and efficiency of processes as well as scheduling. We identify strength and weaknesses in strategies, structure and construction management. We also assist in implementing approved recommendations and changes in information technology, planning, organizing and managing.

Amongst the major projects carried out were Amcorp Trade Centre, a RM350 million mixed development that consisted of three office towers as well as a retail podium and hotel, a RM600 million Sibu Jaya township development, a RM135 million condominium development in Johor and RM45 million Offices development at Bandar Tasek Selatan. Some other works carried out for our associated companies, such as manufacturing process improvement in plastic injection, aluminum die cast, metal stamping, forming and environmental impact studies on our galvanizing facilities.

IAQ Technology International Sdn Bhd – (IAQ) (June 1999 to Current)
Current position: Operation Director

Joined IAQ in 1999 as Operation Director. I am entrusted to initially setup the organization business model, quality system as well as streamlining both internal and external processes in view of corporate direction on globalization and our in road into China. Being a premier cleanroom turnkey contractor in the region, we set our vision to ensure that we deliver quality products beyond our client's expectations. We set forth to commit our search for excellence by investing in human resources, research and development. We successfully promoted our eastern cultural background, work ethics and integrity to the highest level thus gaining the trust in us. I have also personally spearheaded and implemented our enterprise resources and information system for seamless integration and sharing of knowledge between our offices in China and Malaysia.

To avert the cyclical nature of the construction industry and its effect on the group profit and loss, we invested and started manufacturing of consumer electronics, air filters and industrial controls in China. We further secured exclusive dealership to represent products from China and Korea in Malaysia.

Other portfolios under my direct supervisions are purchasing, contract administration and logistic. We maintain a comprehensive databases on our activities and material purchased. This has enabled efficient cost analysis using methodology such as "Activities Based Costing" to drive down costs. The result of our aforementioned investment has escalated annual turnover for the last four years from a modest RMB2 million in 1999 to RMB250 million for last year.

------------

TECHNICAL PAPER PUBLISHED
------------
Federal Standard 209E For Cleanroom - An Obsolete Document!
International Seminar on "Development in Refrigeration, Air Conditioning Heating and Ventilation Systems"

SPECIAL SKILLS
------------
Proficient in Primavera Project Planner, MS Project, Microsoft Office (Words, Excel, PowerPoint and Access), AutoCAD, as well as specific engineering design software such as for CFD.
------------

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2551 to 2600 of 4814)

Go to Search Parameters...

Brief Description

I am a BS Mechanical Engineer who had served primarily as a Senior Fire Protection-Applications and Design Engineer for around 17 years plus and 5 years as an Occupational, Health and Safety practitioner in a petrochemical industry with a primary function as Fire Safety Engineer. My specialty profe

Business planning, estimating, planning and scheduling, cost control and reporting, contract management, earned value, productivity monitoring, claims disputes and resolution, lean construction, high level presentations, multi tasking, meeting deadlines, and creating win-win situations.

20 years of experience (Eight year in Gulf) in varied discipline of Engineering i.e. Quality Control and Assurance, Inspection and Expediting, Piping Specification, Material Handling equipments & system specification, Shutdown maintenance Inspection, Construction Site Inspection(Piping,PV)

Experienced frame and finish carpenter with cabinet experience and management experience

Engineer with well developed analytical and research skills. Possessing expertise in Electrical Demand Forecasting, Power Flow Analysis, Fault Analysis, Stabilities Studies and Economic Load Dispatch. An innovative, dynamic, confident and articulate individual

I have electrical trade certificate holder, and I have more than ten years of experience in maintenance, installation, repair, fault finding of electrical equipment, laying UG cable to connect main switch gear, and maintenance of HT LINE transformer line

A graduate in biomedical engineering with over 5 years of experience in Medical equipment planning, procurement, design assisstance, primary level maintenance in Health Care/Hospitals and developing Management Information System of Biomedical Department

Mechanical Engineer, pipe stress, pressure vessel, compress, caesar

1) Graduate in Mechanical Engineering with 12 years experience in Construction Planning in the power, petrochemical, oil & gas, chemical and industrial sector 2) Proficient in Primavera, MS Project, 3) Strong project management, technical, communication and leadership skills

Ten years experience in Mechanical engineering / Project Engineering of EPCM companies.

I have eight years experience in major civil works projects such as,bridges and metro rail projects.

I am a highly experienced and skilled senior service person. I have many years experience as a expatriate including working in what are considered 'hardship' postings. I am Caterpillar dealer trained, but have recently been working in open cast mines, both coal and gold, in Africa and Asia.

I am HSE professional having work experience of chemical industry and drilling , my education level is masters also completd courageous leadership course in health and safety,management of change, IOSH managing safely,ISO internal audit course,OSHA 18001 internal audit course.

Document Controller, Coordinator, Hr, Admin, IT

High-energy administrative, dependable professional with good judgment and wisdom. Excellent knowledge of principles and procedures for personnel recruitment, selection, training, compensation and benefits, HR information systems, human resources modeling, leadership technique,

Over 17 years of rich & effective experience in Instrumentation maintenance of DCS based controls & instrumentation. Core competence in installation & commissioning field instrumentation, design & logics/programming of DCS / PLC- Honeywell make & Modicon make

E&I Superintendent with a broad spectrum experience of electrical, instrument, and mechanical engineering acquired throughout a thirty year career. 27 years of my experience represents working directly for the Client within the O&G industry, on multi-discipline task force projects, including PMT.

QC, NDT, PIPING & WELDING INSPECTION, RTFI, MT, PT, PMI, FERRITE NO,H ARDNESS TESTING, PWHT, PRE HEAT, HYDO/PNEUMATIC TESTING, LINE CHECK, FABRICATION, ERECTION,C OMMISSIONING

Nineteen (19) years experience in the construction industry including two (2) straight years in Saudi Arabia with an outstanding performance. Exposed to various fields (Construction of Roads & Bridges, Hotel, Residential, Commercial and Industrial buildings including Oil & Gas Industry) in Civil En

To work at Corporate Level with Hard Work & Honesty

Versed in Production and Manufacturing of MIG wire as well as hands on experience in Planning and Manufacturing for turnkey Projects.

Diploma in Quantity Surveyor

Focused well-defined skills in engineering, program/project management, industrial and commercial construction, financial systems, profit and loss, proposals and negotiations.

Recruitment Specialist/HR Generalist

SDS2, Xsteel, AutoCAD Steel Detailer.

Telecommunication, Health, Safety, Environment and Security Coordinator

ITI in Draughtship

Create learning opportunity to work in architectural firm and deal with many graphic jobs.

ASE CERTIFICATIONS: Drive Train / Engine Repair / Manual Drive Train / Axles / Suspension / Steering / Brakes / Fuel Line Distribution / Heavy / Medium Truck Technician.

HVAC Skills

Project Engineer (Instrumentation & Control)

System Administrator, Server Support, Network Administrator, Desktop Support, ADS, DHCP, CCNA, MCSE

Construction Electrical and Instrumentation Engineer

Qa/Qc Inspector

I am a highways designer, designed more than 50 link roads, 2000 kms length all over Egypt, Yemen repuplic, & KSA.Using thelatest versions of Autodesk, Also I have a good expeience in the field of design Water & Waste Water networks

Professional Engineer experience in cleanroom design, construction, installation, testing and commissioning of cleanrooms (HVAC and architectural) for semi-conductors, pharmaceuticals and laboratories.

I describe myself as Sincere and perseverance to Hard work. I had completed my Bachelor of Civil Engineering in First Class From a reputed institution in Tamil Nadu, India.

Bridge Design / Bridge Management Sysytem

An electrical engineer, having 4 years of experience in high voltage side and have got testing and commissioning,design and maintenance experience. i am an indian and would like to get an oppertunity in reputed companies.

About 9 years+ experience in cement industry in mechanical maintenance (preventive, predective and corrective maintenance, compterised maintenance system), worked as section incharge for mills,Kiln, energy conservation, costing techniques.

Greetings, I'm available to provide survey services. I'm experienced in "base camp" situations and logistics.

10 plus years in construction from heavy civil, to residential. MAinlt bridge and highway building

Geotechnical Engineer

I have recently finished my undergraduate study in Mechanical Engineering, Institute Technology of Bandung, Indonesia. I am looking forward to having a career which has strong relation with my educational background.

I have over ten years in the asphalt plant field. I am willing to relocate to just about anywhere in the world for the right job

Company Accountant with ten years experience including chartered accounting, manufacturing and construction including three years experience in Papua New Guinea. Looking for another "expatriate" company accountant position. Available March 2004.

Working in the Kingdom of Saudi Arabia for the last 9 1/2 years. Well experienced in the design and execution of all types of HVAC systems, plumbing systems including water supply, Sewage/drainage system and Fire fighting system.

Results-oriented, Construction site Engineer with 7 years of experience in all facets of the Industry. Verifiable track record for successful completion of many projects.

Red Seal/Interprovincial Journeyman Welder with B-Pressure equivalent & CWB certification

First Prev 51 [ 52 ] 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out