Resume - Graduate Mining Engineer with MBA & First Class Mine Manager's Certificate havin...

Misco Jobs

Resume #76476

CONTACT INFORMATION:
View contact information...

Assignments in Mining Projects / Operations with reputed organisations in Metal or Coal Open Cast / OP Mining / Cement Industry.

B.Eng.(Mining), First Class Mine Manager's Certificate (Metalliferous), with MBA (Operations Management) with over 22+ years' experience in large highly mechanised Open Pit & Underground Hard Rock Mining operation. Working as consultant for Opening up of new Open Cast Mining Projects – General Mine Management, Due diligence, Mine Planning, Drilling & Blasting, Exploration etc. in Indonesia, Turkey, Chile, Zambia & India holding position of Consultant General Manager-Mines and previously worked as Dy.GM-Mining with Essar Steel Ltd., India, Manager (Mines) with National Mineral Development Corporation Ltd. (A Government of India Enterprise) (5.5 yrs.), India, Hindustan Zinc Ltd., India (14.5 yrs.) and JK Cement Works, Nimbahera, India (1 yr). Expertise in managing Operation, Production, Production Planning/scheduling, Mine Development, Short Term Mine Planning, Waste Dump Management, Large dia. Drilling & Blasting in highly mechanized large Hard Rock Open Pit & Underground Metal Mines; extensive experience in successful opening & development of new mines across assignments.

Experience in operation of highly mechanized hard rock, large Open Pit (Iron Ore, Zinc & Lead, Lime Stone and Gemstone) & Underground Metal Mines (Zinc & Lead) from project implementation stage to full production and managing independently opening & production of Iron Ore Mining in Chile & Gemstone mining in Zambia (Africa) and Iron Ore & Sphelerite and Galena mines in Turkey & India. The Job involved operation and maintenance of HEMM like 85t Dumpers, Electric Rope Shovel (4.5/5 cum capacity), hydraulic Excavators (6.1/4.8 cum capacity), Electric & Diesel Drills (250, 165, 100 & 57 mm dia.) etc. Knowledge in short term Mine Planning includes preparation of Monthly, Quarterly rolling plan, and Annual Mining Plans. Liaison with State & Central Government Departments / Authorities.

CAREER OBJECTIVE

To secure a senior management position in a high growth global company with considerable advancement opportunities. Ideally, in Mine Operation / Production requiring high degree Skill & Professional knowledge with an opportunity for professional growth linked to potential, knowledge & performance.

KEY STRENGTH AREA

Mine – Management / Leadership, Production, Open Pit, Drill & Blast, Mine Development, Short Term Mine Planning & General. Develop and Manage Open Pit operation, Mining Contracts Administration.
Team building; negotiation; change management and strong analytical skills.

ORGANISATIONAL EXPERIENCE

Feb 2008 to Continue as Mining Consultant

Various assignments as Mining consultants for leading MNCs for Opening up of new Open Cast Mining Projects – General Management, Due diligence etc. in Indonesia, Turkey, Chile, Zambia & India for developing brown field Base Metal Mine, short term exploration to production stage development of Iron Ore Mine which was previously worked by underground Mining method, due diligence work in Indonesia for Chromite & Manganese property etc.

Significant Accomplishments:
* Worked as Head of Base Metal Open Cast Mine brown field project, Magnetite Open Cast Mining Project near Copiapo.
* Co-ordination with the local Govt. authorities for startup activities of the O/C Mining Project, Military police for Explosives Magazine.
* Short term Mine planning for development of waste dump, Mine roads, dynamic stock pile to start ore production in 9 months.
* Correction work for conversion of previous underground Mining to O/C Mining.
* Re-aligning of Mine approach road.
* Clearance of pending old Forest land diversion proposals from Forest Dept. and preparation for submission of new proposal for additional forest land diversion for waste dump, tailing dam, setting up of beneficiation plant and other related infrastructure.
* Selection & Finalisation of parties to assign the work of O/C Mine Development contract, Hydro-geological survey for availability of water for beneficiation plant.
* Discussions with the various parties to setup beneficiation plant of 1000 tpd.
* Co-ordination for short term exploration activities and finalization of parties for drilling.
* Setting up of infrastructure at Mine site to cope up the requirements of Project activities.
* Co-ordination of Mineralogical testing activities from outside laboratory for finalization of beneficiation circuit.
* Advertising & making panel for selection of Mine Manager, Geologists, Surveyor, supervisory and other Operational & office staff.
* Involved in the settlement of old dues of previous owner.
* Planning for corrective actions for developing Iron Ore O/C Mines from the previous haphazard underground sublevel workings without any previous underground working plans.
* Inviting quotations from the parties and subsequent discussions with them for negotiation & finalization of the parties in connection with Mine Planning, setting up of Beneficiation plant, providing various services etc.
* Infrastructure development at Mine site like laboratory, Offices etc. and housing arrangements for various technical staff.
* Involved in the identifying, selection and motivating the right technical expats from India to work for the project.
* Over all control of exploration work through Manager – Geology by engaging three RC drilling through contractors. Total targeted exploratory drilling was 15000 m.
* Co-ordination with the outside laboratories for getting quick sampling results for speeding up of exploration activities.
* General assessment of logistics for shipment of concentrate and loading facilities, time studies at the nearby Caldera port.

July 2007 to Feb. 2008 with Essar Steel Ltd. as Dy. General Manager – Mining www.essar.com
Associated with Iron Ore Exploration & Mining related activities in India & abroad.

Significant Accomplishments:
* Worked as Project in-charge for Prospecting license applied for exploration and subsequent development of 4.5 million ton p.a. O/C Hematite Mines for Deposit No. 3, 6, 7, 8 in Bailadila sector of Chattisgarh State.
* Surveying work completed in the applied and surrounding area in liaison with state Forest & Mining Dept.
* Geological Mapping work completed through geologists, geological sections drawn for deciding the boreholes locations and prioritizing & sequencing the bore holes in such a manner so that decision for finalizing parallel Mine development activities is fastest.
* Contractor selection to start bore holes immediately after getting clearance from CEC.
* Liaison with NMDC Ltd. for getting details of old works done by NMDC in the PL applied area.
* Business development activities – evaluation of various proposals came from private parties from Karnataka and searching for new potential Iron Ore bearing areas for applying PL in Karnataka & Rajasthan.
* PL applied in Rajasthan on two potential Iron Ore area searched during meeting with state Mining Dept. officials and other sources, and collected old related important data / confidential reports from the GSI & State Mining Dept.
* Evaluating other Base Metal Mining proposals for O/C and Underground Mining received by the company for acquisition from various sources within the country & abroad.
* Inordinate delay in CEC approval resulted in delay in start of the project.

Nov. 2006 to July 2007 as private Mining Consultant
Consultancy work in India & overseas assignments in Indonesia & Zambia – for Iron Ore Mining, Lime Stone (cement grade), Base Metal (Zn-Pb, Multi-metal, Mn, Fe), Large highly mechanized hard rock Gem Stone Mining in Zambia etc. In connection with consultancy work two times visited Indonesia for Project evaluation for acquisitions of Mines, advising for Exploration, Production Planning, Quality Control and logistics for Manganese, Iron Ore and Base Metal (Zn & Pb) deposits. Actively involved for JV with Indonesian parties.
June 2001 to Oct. 2006 (5 yrs. 5 months) with National Mineral Development Corp. Ltd (A Government of India Enterprise), Hyderabad, India as Manager (Mining)
http://www.nmdc-india.com
Highest Iron Ore producing Mining company in India having Large highly mechanized hard rock Iron Ore Open Pits / Mines producing 27 million Ton Iron Ore with total excavation of more than 32 Million Ton per annum
Worked in the following different Open Cast Mining (OP) Projects of NMDC Ltd.:
August 2003 – Oct. 2006 at Donimalai Iron Ore Project, Location: Dist. Bellary, Karnataka, India
Integrated Highly Mechanised large Open Cast Iron Ore Project with total 9.1 Million Tonne Excavation target (5.9 MT ROM & 3.2 MT Waste), having two Mines (Donimalai Iron Ore Mine & Kumaraswamy Iron Ore Mine).
June 2001 – Aug. 2003 at Bailadila Iron Ore Project (BIOP) – Deposit No. 5, 10 & 11A, Location: Dist. Dantewara, Chattisgarh, India
Highly mechanised large Open Cast Iron Ore Mine (Hematite) with 10.0 Million Ton excavation target
Significant Accomplishments:
* Worked as Head of Kumaraswamy Iron Ore Mine (KIOM) of Donimalai Iron Ore project and handled the operations for mechanized opencast Iron Ore Mine by engaging contractor. The Mine is planned to produce 2.0 Million Ton excavation.
* Responsible for Mining / Excavation Contracts – Engineer-in-charge, Total Contract value INR 8,00,00,000 (US $1.6 million).
* Responsible for Mine Production which including Drilling & Blasting, Crushing & Screening Plant, Co-ordination in Production shifts, Safety, Quality Control, Deployment of HEM Equipments, Dispatches of finished product – Iron Ore Fines / Classified Lump Ore (CLO).
* Responsible for resourceful operations & maintenance of opencast mines including heavy mining machinery viz. Hydraulic excavators, Wheel Loaders, Trucks, Wagon Drills and other ancillary equipments at KIOM
* Job also involved mine planning, waste dump management and development of mine phases on monthly, quarterly, annually and five yearly planning at KIOM.
* Responsible for General administration, liaison with Government Departments viz. DGMS, IBM, Mines & Geology, Forest, State Administration at KIOM.
* Handled the operations for highly mechanized large opencast Iron Ore Mine having 8.8 Million Ton excavation target at BIOP Dep. 5, 10 & 11A.
* Responsible for resourceful operations & maintenance of opencast mines including heavy mining machinery viz. Electric Rope Shovels (3.3 KV) – 4.6 m3, Dumpers – 85 Ton, Single Pass (16 m mast) Electric Blast Hole Drills (3.3 KV) DMH USA make – 250 mm ô hole and other ancillary equipments like D 355 Dozer, Water Sprinkler, Grader etc.
* Achieved 12 % increase in production in a shift during the year 2001-02 at BIOP Dep. 5, 10 & 11A.
* Section in-charge for Long/Deep Hole blasting at BIOP Dep. 5, 10 & 11A & Donimalai Iron Ore Mine.
* Responsible for Multi-Skill Development & co-ordination of all types of training to the employees

December 1986 – June 2001 (14.5 yrs.) with Hindustan Zinc Ltd. (A govt. of India Enterprise), Udaipur, India http://www.hzlindia.com
- Joined as Engineer (Mining)
- Promoted to Manager (Mines) in Sept. 1996

Open Cast Mine (7 yrs., Aug. 1991 to April 1998) – Rampura Agucha Mine

Highly Mechanised Large Open Cast Mine – excavation target 24.0 Million Ton per annum (present) producing Lead & Zinc Ore (Sphelerite & Galena).

Significant Accomplishments:

* As Manager (Mines) handled the operations for large opencast Lead & Zinc Mine (Rampura Agucha Mine) including project commissioning in coordination with British Mining Consultant under Overseas Development Assistance (ODA) Project.
* Responsible for safe & resourceful operations & maintenance of opencast mines including heavy mining machinery viz. 85 tones Dumper, Hyd. Excavator (6.1 & 4.8 cum cap.), Blast Hole drill 150 mm hole dia., D 355 Dozer, Water Sprinkler, Grader etc. Total material handling at Mines is about 30,000 ton per day.
* In-charge for Deep hole blasting in shifts – explosives used – Site Mix Slurry (SMS), Cartridge and ANFO and charging with SMS Pump Truck & ANFO Mixing Truck.
* As excavation I/c – Job involved shift coordination, heavy blasting with SMS & Cartridge, Pit dewatering,
* Job involved mine planning, waste dump management and development of mine phases on monthly, quarterly, annually and five yearly planning.

Underground Mines (7.5 yrs., Dec. 1986 to Aug. 1991 & May 1999 to June 2001)

Worked in different underground Mines of Hindustan Zinc Ltd.:

Zawar Mines, Location: Dist. Udaipur, Rajasthan [May 1999 – June 2001]
Agnigundala Lead Project, Location: Dist. Guntur, AP [April 1998 – April 1999]
Rajpura Dariba Mines, Location: Dist. Rajsamand, Rajasthan [Dec. 1986 – August 1991]

Significant Accomplishments:

* As Manager (Mines) handled the operations for large underground Lead & Zinc mine (Zawar Mines – Balaria & Baroi Mine, Rajpura Dariba Mine & Agnigundala Lead ore Mine). U/G Mining methods used were – Cut & Fill, VRM, Sub Level Open Stoping modified to use Long Hole Blasting, Shrinkage & Brest Stoping.
* Responsible for safe & resourceful operations & maintenance of underground mines including mining machinery viz. Wagner diesel LHD (3.5 yd3), Electric Jarvis Clark LHD (2.2 cum), CAVO Loader, Alimak Raise Climber, Ring Hole Drill 150/110/57 mm hole dia., Diesel & Trolley Wire locomotives etc. Total ROM about 1200 ton per day.
* Responsible for Mine Development Contracts execution, Shaft sinking/deepening & Raising by Alimak Raise Climber through contractor, Drives, Sump, Crusher Chamber making etc.
* Achieved the ever highest Drilling & ROM Production during 1999-2000 with high quality control norms at Balaria Mine and ever highest ROM / Production during 1998-1999 at Agnigundala Lead Ore Mine.
* Job involved all three shift coordination, Crushing & Hoisting of Ore by Skip (Coepe Winder) Long Hole Ring blasting with Cartridge & ANFO (using ANFO Loader), Mine dewatering,,.
* Job also involved Blast Hole Ring Design, Stope Design etc.

January 1986 – November 1986 – J.K. Cement Works, Lime Stone Open cast (OP) Mine, Location: Nimbahera, Dist. Chittorgarh, Rajasthan, India
Significant Accomplishment:
* As Shift in-charge handled the operations for highly mechanized Lime Stone Mine
* Played a key role in the deployment of Heavy Earth moving Mining machineries to get optimum output from Dumper (50/35 tones), Hyd Excavator & Drill Machine (4"IR) and other ancillary equipments for cement plant of 3000 ton per day capacity.

PROFESSIONAL CERTIFICATIONS

First Class Mines Manager's Certificate of Competency (Metalliferous) - 1993
(Issued by Directorate General Mines Safety, Dhanbad, under Ministry of Labour, Govt. of India)
Recognised Qualified Person (RQP)
(Issued by Indian Bureau of Mines, Bangalore, under Ministry of Coal & Mines, Govt. of India)
First Aid Certificate (Medal)
(Issued by St. Johns Ambulance Association, India)
IT SKILLS

Proficient with MS Office, Internet & Email. Trained on Surpac Mine Planning Software

EDUCATION / ACADEMIC QUALIFICATION

B.Eng. (Mining) (5 year degree course followed by 11 years schooling) from M.B.M Engineering College, JNV University (Jodhpur) Jodhpur, Rajasthan, India in 1985
MBA (Operations Management) from Indira Gandhi National Open University (IGNOU),
New Delhi, India in 2001

PROFESSIONAL AFFILIATIONS
Life Member:
* Institution of Engineers (India), Kolkata – Fellow Member
* Indian Society for Rock Mechanics and Tunneling Technology, New Delhi.
* Mining Engineers Association of India, Hyderabad.
* Loss Prevention Association of India, New Delhi.
* Administrative Staff College of India, Hyderabad.
Member:
* All India Management Association, New Delhi.
* Mining Geological and Metallurgical Institute of India, Kolkata

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2501 to 2550 of 4758)

Go to Search Parameters...

Brief Description

To repair and service

Inspection of Oil & Gas, Refinery, Petrochemical plant and offshore field Static equipments, Welding, piping, pipelines, painting& coating and NDT.

Transformational Human Resources Manager with strong business orientation and multi-site experience in a broad range of HR Generalist functions including recruiting, staffing, talent development, HRIS, organizational development, staff management, and many others.

10 years of professional experience in commissioning trouble shooting and servicing heavy-duty diesel engines. Presently working as Senior Service Engineer, responsible for field service of Cummins Diesel Engines. I possess strong academic credentials and good communication skills.

An Entry level position within a growing industry that takes advantage of my electrical engineering education and skills.

A highly motivated, ambitious and systematic individual with exceptional interpersonal skills •Presently doing Masters in Mechanical Engineering with one year of full time experience as Design Engineer working on PRO-E.Proficient in Pro/Engineer 2000, Wildfire, Pro/Mechanica.

Strong structural engineering knowledge, Energitic, Good analitycal thinking, Self motivated, Hardworking, Dedicated person, Able to work under pressure.

LARGE AND STRATEGIC PROJECTS MANAGEMENT - BUSINESS AND OPERATIONS MANAGEMENT

Senior mining professional with global risk management experience identifying and managing risk in mining operations and related construction projects

Mechanical Engineer,masters in Engineering Design,CATIA V5,SOLIDWORKS

Qualification: Diploma In Civil Engineering(3Years), Over 11 years experience in Land surveying, the majority of which has been spent gaining experience of Surveying works using modern surveying equipments and Surveying software.

B-GAS LEVEL II PAINTING INSPECTOR.MORE THEN 15 YEAR EXPERIENCE IN INSPECTION FIELD.

5 yrs experience in crushing & asphalt operation,maintenance,motor control centre,inventory control,switchgear.

2D and 3D cad applications - upstream and downstream experience

12 Years experience in civil engineering, design, procurement, construction & supervising of particular relevance to the project are as follows :

10 Year Experience, 5 years Implementing SAP FI/CO and BW / BI / Netweaver Solutions for Banking, Manufacturing, Sea port industry, Maintaining SAP BW Solution for Oil and Gas Industry

Heavy Equipment Operator to include Mobil Cranes, Crawler Cranes, Overhead Cranes, Forklifts, and Tractor/Trailer

Quality control, Inspection, Installation/erection of pipes and piping components, HVAc, HSE, Computer literate

Graduate Mining Engineer with MBA & First Class Mine Manager's Certificate having 22+ yrs. Hard Rock Large Highly mechanised hands on experience in Mine Operation, Drilling & Blasting, Mine Planning, Contracts Management, Waste Dump & Haul Road, Mine Dewatering

Junior project manager

Scheduler, Primavera P3E & Expedition

Land surveying relating to boundaries, design, construction, and mapping.

Jouryneyman Millwright - Alignment Specialist - Lazer, Reverse and Rim& Face. I have installed and rebuilt steam and gas turbines, crushers,conveyors, ball and sag mills, tower mills, pumps, compressors, blowers.

12 years experience in all aspects of telecommunications. Excellent written and communication skills. Highly organized. Ability to work on multiple assignments. Excellent problem solving skills. Able to meet deadlines and schedules. Start of to completion of projects to include ordering, insta

Motivated, proven performer with a 17 year record of demonstrated success in Operations Management, Project Management, Distribution/Logistics Management, and Mechanical Engineering across multiple fields from Military Operations, Municipal Management, Telecommunications, Software Development, Call

I am a BS Mechanical Engineer who had served primarily as a Senior Fire Protection-Applications and Design Engineer for around 17 years plus and 5 years as an Occupational, Health and Safety practitioner in a petrochemical industry with a primary function as Fire Safety Engineer. My specialty profe

Business planning, estimating, planning and scheduling, cost control and reporting, contract management, earned value, productivity monitoring, claims disputes and resolution, lean construction, high level presentations, multi tasking, meeting deadlines, and creating win-win situations.

20 years of experience (Eight year in Gulf) in varied discipline of Engineering i.e. Quality Control and Assurance, Inspection and Expediting, Piping Specification, Material Handling equipments & system specification, Shutdown maintenance Inspection, Construction Site Inspection(Piping,PV)

Experienced frame and finish carpenter with cabinet experience and management experience

Engineer with well developed analytical and research skills. Possessing expertise in Electrical Demand Forecasting, Power Flow Analysis, Fault Analysis, Stabilities Studies and Economic Load Dispatch. An innovative, dynamic, confident and articulate individual

I have electrical trade certificate holder, and I have more than ten years of experience in maintenance, installation, repair, fault finding of electrical equipment, laying UG cable to connect main switch gear, and maintenance of HT LINE transformer line

A graduate in biomedical engineering with over 5 years of experience in Medical equipment planning, procurement, design assisstance, primary level maintenance in Health Care/Hospitals and developing Management Information System of Biomedical Department

Mechanical Engineer, pipe stress, pressure vessel, compress, caesar

1) Graduate in Mechanical Engineering with 12 years experience in Construction Planning in the power, petrochemical, oil & gas, chemical and industrial sector 2) Proficient in Primavera, MS Project, 3) Strong project management, technical, communication and leadership skills

Ten years experience in Mechanical engineering / Project Engineering of EPCM companies.

I have eight years experience in major civil works projects such as,bridges and metro rail projects.

I am a highly experienced and skilled senior service person. I have many years experience as a expatriate including working in what are considered 'hardship' postings. I am Caterpillar dealer trained, but have recently been working in open cast mines, both coal and gold, in Africa and Asia.

I am HSE professional having work experience of chemical industry and drilling , my education level is masters also completd courageous leadership course in health and safety,management of change, IOSH managing safely,ISO internal audit course,OSHA 18001 internal audit course.

Document Controller, Coordinator, Hr, Admin, IT

High-energy administrative, dependable professional with good judgment and wisdom. Excellent knowledge of principles and procedures for personnel recruitment, selection, training, compensation and benefits, HR information systems, human resources modeling, leadership technique,

Over 17 years of rich & effective experience in Instrumentation maintenance of DCS based controls & instrumentation. Core competence in installation & commissioning field instrumentation, design & logics/programming of DCS / PLC- Honeywell make & Modicon make

E&I Superintendent with a broad spectrum experience of electrical, instrument, and mechanical engineering acquired throughout a thirty year career. 27 years of my experience represents working directly for the Client within the O&G industry, on multi-discipline task force projects, including PMT.

QC, NDT, PIPING & WELDING INSPECTION, RTFI, MT, PT, PMI, FERRITE NO,H ARDNESS TESTING, PWHT, PRE HEAT, HYDO/PNEUMATIC TESTING, LINE CHECK, FABRICATION, ERECTION,C OMMISSIONING

Nineteen (19) years experience in the construction industry including two (2) straight years in Saudi Arabia with an outstanding performance. Exposed to various fields (Construction of Roads & Bridges, Hotel, Residential, Commercial and Industrial buildings including Oil & Gas Industry) in Civil En

To work at Corporate Level with Hard Work & Honesty

Versed in Production and Manufacturing of MIG wire as well as hands on experience in Planning and Manufacturing for turnkey Projects.

Diploma in Quantity Surveyor

Focused well-defined skills in engineering, program/project management, industrial and commercial construction, financial systems, profit and loss, proposals and negotiations.

Recruitment Specialist/HR Generalist

First Prev [ 51 ] 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out