Resume - Mining Engineer / Project / Operations Manager

Misco Jobs

Resume #76727

CONTACT INFORMATION:
View contact information...

EDUCATION
University of Utah, Salt Lake City, Utah, USA
Bachelors of Science, Geological Engineering
Bachelors of Science, Mining Engineering
Masters of Science in Mining Engineering

PROFESSIONAL
Professional Engineer Registration (EIT): Utah – 295597, Pending Exam
Professional Geologist Registration: Utah – 295597-2250
Certified Underground Mine Foreman - State of Wyoming
Certified Mineral Appraiser (AIMA - Associate Member)

Member, Society of Mining Metallurgy and Exploration (SME)
Member, International Society of Explosives Engineers (ISEE)
Member, South African Institute of Mining and Metallurgy (SAIMM)

EXPERIENCE
Operations Manager – Reclamation Division
* Operations Manager for multiple large-scale earth moving projects throughout Arizona, New Mexico and Colorado.
* Responsible for orchestrating all aspects of materials, equipment and manpower
* Responsible for 10 direct +250 indirect reports depending on the Project scope
* Responsible for multi-million dollar project estimating ($1MM to $85MM), budgeting and sequencing.
* Long and Short Term planning for multiple operations
* Management of all special projects, coordinate and liaise work with outside consultants, contractors, and services for various on-site activities.
* Procurement of all operation equipment and capital needs.
Freeport-McMoRan Copper & Gold (formerly Phelps Dodge Mining Company)
Reclamation Services Division
Phoenix, Arizona
February 2006 - Present

Mine Manager
* Mine Manager for large-scale limestone quarry – 4.2 million tons in combined ore/waste annual material movement
* Responsible for all aspects of material movement ranging from drilling and blasting procedures, to proper crusher and screening operation
* Responsible for 3 direct and 22 indirect reports
* Responsible for multi-million dollar budgeting and all mine related consumables from explosives to crusher and screening materials
* Long and Short Term planning for multiple open pit operation
* Management of all special projects, coordinate and liaise work with outside contractors for various on-site projects
May 2005 – December 2005

Sr Geotechnical / Mining Engineering Consultant (surface/underground)
* Geological assessment and geotechnical evaluation for highwall stability for large-scale limestone quarry expansion - Kentucky
* Long and Short Term planning for multiple open pit operations - Kentucky
* Updated geological reserves and evaluated mining operations/process plant expansion for 98-million ton life-of-mine open pit/dredging operation – Indiana
* Calculated and modeled geological reserves and evaluated industrial mineral potential using deepwater dredging equipment (Gemcom) - Ohio
* Completed pre-feasibility study, geological assessment and long-term mine plans for the commercial sale of high quality feldspar products (Gemcom) - Virginia.
On going projects include;
* Project Manager for the Reclamation and hazard mitigation for abandon and historic surface and underground mining operations for the state of Wyoming, including; State-wide site Investigation, inventory, survey and engineering designs related to multiple mine closures - Wyoming Department of Environmental Quality, AML. Projects 10B-II: Phases I and II, and 17-I,
* Project Engineer for Large-scale mountain top removal (1-billion ton) dragline scenarios for improved environmental mining practices. US EPA, Washington D.C. –
* Project Management of special projects, coordinate and liaise work with outside sub-contractors for the development of new underground mines in the Ohio Valley
* Scheduling and overseeing client operations and activities in order to best utilize manpower, material and facilities
* Produce computerized mine maps and sections for mining clients and governing management and agencies.
* Advise upper level management on utilization of Company equipment and assets
Morgan Worldwide Consultants
Multiple Mines (various commodities)
Lexington, Kentucky
January 2002 – May 2005

Independent Consultant - Geotechnical/Mining (surface/underground)
* Geological drill hole analysis, including scheduling to logging
* Mining claim research and investigations
* Geotechnical investigations for underground stope design and layout
* Long and short term planning of narrow vein gold mines
* Management of ore control, grade system and U/G diamond drilling crews
* Management of underground construction crews and scheduling
* Classify and recommend areas for development based on geological modeling
* Scheduling and overseeing operating activities to best utilize manpower, material and facilities
* Long and short-term mine planning for Open-Pit mines and dual dragline operations
* Supervise and oversee ore control, grade system and milling and mining crews
* Classify and recommend areas for future development and areas for reclamation
* Produce computerized mine maps and sections for operations personnel/managers
* Managed special projects, coordinate and liaise work with outside sub-contractors
* Advise upper level management on utilization of Company equipment and assets
* Initiate maintenance and repair requests, recommend equipment and process changes to maximize efficiency and reduce downtime.
Various Mining Operations (Au – Ag, industrial minerals)
Mother Lode District – Northern California
December 2000 – December 2001

Contract Mining Engineer – Production (underground)
* Responsible for all underground production parameters for a 35k tpd mechanized block cave operation, duties include:
* Geotechnical investigations and long term planning of mining activities related to production, i.e., drawpoint spacing, stope and undercut design parameters, support recommendations, seismic potential etc
* Long-hole drilling and blasting procedures, this includes all engineering parameters needed to optimize results and efficiency, i.e., charge density per hole, timing, pattern layout and design, over-break control, blast vibration etc
* Raisebore design and layout, liaised with contactors for schedules and supplied added support when needed
* Long and short term planning of undercutting and drawbell opening sequence
* Managed ore control grade system and sampling crews
* Compare actual tonnes to forecast projected by computer software (Gemcom PCBC)
* Classify and Recommend production drawpoints for repair and/or closure
Freeport – McMoRan Copper & Gold
Underground Operations, DOZ mine (Cu – Au)
Tembagapura, Irian Jaya, Indonesia
December 1999 – December 2000

Sr Geotechnical Engineer - Drill and Blast (underground)
* Responsible for all underground drilling and blasting operations for a multi-level mechanized block-cave operation, duties include:
* Long-hole drilling and blasting procedures, this includes all engineering parameters needed to optimize results and efficiency, i.e., charge density per hole, timing, pattern layout, over-break control, etc
* Developmental drilling and blasting, i.e., timing, pattern, charging, over-break, etc.
* Equipment and Supply procurement related to drilling, charging and blasting
* Geotechnical investigations for, and long term planning of, mining activities ranging from development to production, i.e., drawpoint spacing, stope and undercut design parameters, etc
De Beers Consolidated Mines Ltd.
Premier Mine (diamonds)
Cullinan, South Africa
May – December 1999

Sr. Geotechnical Engineer (underground)
* Geotechnical Section Head and Manager for a team of seven
* Responsible for the geotechnical activities of six underground mines that comprise the Kimberley Mines group, duties include:
* Slope stability of open pits ('glory-holes'), mine de-watering of surface and sub-surface, rock mechanics instrumentation implementation and monitoring
* Geotechnical investigations and long term planning for mining activities ranging from development to production, i.e., drawpoint spacing, stope and undercut design parameters, etc
* Design of reinforcement and support systems for all development as well as the ongoing rehabilitation of older areas,
* Installation supervision of grouted rock and cable bolts, as well as the application of shotcrete and other support media
* Geotechnical issues governing surface and underground blasting, i.e., timing, pattern, charging, over-break, etc.
* Management of efficient draw-control systems, related to multiple level block-cave mine operations
* Quality control of underground concrete and shotcrete, including structural integrity and time related strength parameters
* Reporting of changing surface and underground geotechnical issues to various governmental and local agencies
* Trained in complex computer software, e.g., Gemcom, AutoCAD, PFC, FLAC (limited), Visual Basic, etc.
De Beers Consolidated Mines Ltd.,
Kimberley Mines (diamonds)
Kimberley, South Africa
June 1997 – May 1999

Mining Engineer (surface)
* Planned long and short-term open-pit mining schedules
* Compiled and generated End-of-Month volume calculations for bonus payment scheme and smelter reconciliation
* Generated short-term mine plans using MEDsystem mine planning software using real-time assay values
* Determined NSR cut-off pit using MEDsystem mine planning software
* Compiled detailed structural and geologic plans of the mining operations using AutoCAD and MEDsystem software
Rio Tinto – Kennecott Minerals
Flambeau Mine (Cu – Au)
Ladysmith, Wisconsin, USA
1996

Mining/Geological Engineer (surface)
* Assisted with geological and mining data interpretation for various exploration projects
* Researched and logged geological field samples and other related information
* Entered and organized geological data into exploration network and database
* Digitized geological information using AutoCAD for MEDSystem block modeling and ore body analyses
Rio Tinto – Kennecott Exploration Company
Corporate Office (Cu – Au)
Salt Lake City, Utah, USA
March 1993 - June 1996

Mining Engineer (underground)
* Underground LHD production scheduling
* Maintained efficient block-cave draw-control systems database
* Completed underground blast efficiency and vibration studies to minimize structural damage
* Monitored blasting procedures for drawpoint hang-up control and recommended blasting plan of action
* Monitored and recorded hang-up frequency in drawpoints and drawbells for ongoing fragmentation analysis
* Collected and evaluated drawpoint ore/dilution data
Codelco-Chile, Division El Teniente
El Teniente Mine (Cu – Ag – Au)
Rancagua, Chile
1995

Mining/Geotechnical Engineer (surface)
* Completed large-scale open-pit blast vibration study based on geotechnical domains
* Monitored daily production blasting for peak particle velocity and structural damage
* Collected and analyzed routine daily and weekly geotechnical field data
* Monitored and recorded in-pit geologic events, e.g., slope failure, etc.
Rio Tinto – Kennecott Utah Copper
Bingham Canyon Mine (Cu – Au – Mo)
Salt Lake City, Utah, USA
1994

NOTABLE EVENTS * Selected as one of ten international mining engineers for Codelco-Chile, S.A.
* Toured all major ore deposits and mining operations of Northern Chile, S.A.
* AutoCAD Course Lab Instructor, University of Utah, USA

PAPERS PUBLISHED * "Numerical Modeling of Large Scale Block Cave Physical Models"
M.Sc. Thesis, pp. 307
* "Numerical Modeling of Large Scale Block Cave Physical Models using PFC2D"
Society of Mining, Metallurgy, and Exploration
* "Numerical Modeling of Large Scale Block Cave Physical Models using PFC2D"
(Accepted for publication, 11/97) International Journal of Rock Mechanics

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1551 to 1600 of 4805)

Go to Search Parameters...

Brief Description

Mining Engineer / Project / Operations Manager

I have completed B.Tech in the field of Electrical Electronics Engineering at 2009 and I also completed Diploma in the same field at 2005. I have a year Experience in Government Electricity Department at 2005-2006 in Puducherry, India. I attached my CV for your kind considerat

Have a vast professional experience in road construction; Can handle high pressure with ease and open mind • have handled various critical and challenging projects from design stage to implementation stage and ensured that the projects gets implemented as per specification in stipulated time with

Experienced safety professional and proven leader in the Environmental Health & Safety environment. I've developed and successfully implemented several innovative injury prevention programs which has resulted in millions of dollars saved in Workers' Compensation expenditures.

Ironworker, sheetmetal mechanic

I am Nechifor Cristinel. I worked in power plant, refineries, oceanic platform with different operations for electrical maintenance, commissioning, construction as electrical technician , electrical inspector or electrical supervisor last time.

Project Construction Manager (Fabrication, installation, Offshore Hook-up)

Process Engineer - Oil&Gas - Sulphur - Refinery

Asphalt Plant Manager/Foreman 38 years in asphalt production field

AutoCAD, ADT,3 DS Viz, MSOffice, C, C++, Unix,ProE

My qualifications are reinforced by over 20 years of Industrial Insulation as a front line supervisor. Multi-tasking for the past 5 years as a Painting Supervisor as well as Insulation Supervisor, has expanded my talents to a broader range that may well serve you better.

Engineering, cadd designer, autocad, microstation

Industrial Engineer, with more than 9 years Experience in Planning and Cost, in EPC and developmental projects, both onshore and offshore. Worked in Oil,Gas,Petroleum and Automotive field.

project in erection, maintenance and up gradation project of 40 MW power station and

Over 16 years of experience in leadership roles within complex operations, supervising diverse teams and managing challenging programs/assignments within U.S and international locations

Highway Laboratory / QC Manager with 25 years experience in materials

I am a skilled solid tradesman with a solid family looking for interesting ,rewarding employment.

Senior Weld Mgr / Engineer. I have for decades specialized in providing management support for the implementation of Best Weld Practices and the establishment of Weld Process Controls. I

Contract working, supervision of dam construction, geological worlks etc.

Electrician and editor of substation

Seeking a position in management with the opportunity for further career advancement through using sound judgment and personal performance. Will consider a staff position with opportunity for advancement.

BS biomedical engineering, looking for a job where i can use my knowledge and skills to overcome the problems.

I have done the project for International Power name "Feasibility of Electrical Energy Saving at HUB POWER station. and I can design different kinds s controlling circuits by using microcontroller,PLC and VFD.

A position of significant responsibility that builds upon extensive experience in construction management, expertise in managerial skills and cost analysis. Ultimate goal is to grow within and with the progressive organization that provides excellent career advancement opportunity

5 year appreniceship as diesel mechanic. 5 years experience as engineer in British Merchant Navy .Conversant with Caterpillar, Terex, and Aveling Barford earthmoving equipment , various supervisory positions worldwide in different disiplines

I AM A LAND SURVEYOR WITH CERTIFICATE QUALIFICATION.I HAVE 8 YEARS WORKING EXPERIANCES AS A LAND SURVEYOR IN CONSTRUCTION AND TITLE WORK IN MALAYSIA AND OVERSEA.

Repair & maintenance of plant & equipments used in construction, knowledge in overhauling of engines used in construction equipment, maintaining & preparing all technical reports related to plant

journeyman lineman service, const, underground cdl cpr overhead switching

I am a university-educated Canadian Registered Safety Professional with over 15 years of Environment, Health and Safety experience. This experience has included the development and implementation of EHS management systems, training programs, risk assessments and emergency response plans.

I have worked and performed 2 (two) years as HSE (Health Safety & Environment) in construction which one year in oil & gas project (pipeline and gas plant) and one year in civil package, erection in reconstruction cement plant project.

Over twenty-five years experience in Project/Construction Management in an Engineering Procurement and Construction Management environment, specializing in Project Controls, Planning and Scheduling. Project Controls background includes EP, EPC and EPCM.

Diploma in Mechanical/materials management with 17 Years expereice in Material Controlling and Piping looking for employment with reputed organisations.

QA/QC Supervisor, Welding Inspector

I am searching for offshore employment as a crane operator. My specialty is the Tower Crane. I have operated many types of cranes up to 250 ton.

Electro-mechanical overhead crane repairman

Estimating,Quantity Surveying, Project Planning & Project Management

MILLWRIGHT Detailed oriented Gold and Red Seal (V1984) experienced Journeyman Millwright Foreman with experience in construction and petrochemical plant environments.

extensive experience in the field of pre-cast concrete products

Piping Designer PDS CAD

I am capable to handle Administration, Partner with HR, Security, Procurement, Vendor Management, Liaison and other assigned work given by the Management.

12 years of experience working in the oil and gas industry for production, service and engineering companies as planner/scheduler, cost controller, service planner. Experienced in scheduling and cost control procedures, data collection/entry/processing and analysis, data base maintenance, used speci

Rigger, works well at height

Basic education:College of Business Administrartion, Secondary ed. of engineering. Advanced sch: WTA ind.eng.; ISO Quality systems; Turu col of econ. int.marketing; Different schooling in marketing/sales. Lang.: ENG;RUS;FIN; EST. PC-MS Office; MS Project;ind.controllers user interf. Driv.Lic ABCE

I am a senior attending California Polytechnic University, Pomona, and I will be completing my Bachelor’s degree in Mechanical Engineering, along with a Minor in Materials Engineering Sciences, in the fall of 2009. I am currently seeking an internship or entry level position.

Mechanical Master, Master Gasfitter

Dynamic, highly adaptive professional offering 20+ years’ experience.

Electrical

Technical /Project Engineer

Electrical Engineer in profession, Knowledge in instrumentation and control, Design and trouble shoot's motor control, can do hard wirings,

AutoCad 2007, Sketchup, Inventor, SolidWorks

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 [ 32 ] 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out