Resume - Installation, Testing and Comissioning of various SCADA and Telecommunication re...

Misco Jobs

Resume #76861

CONTACT INFORMATION:
View contact information...

SUMMARY of SKILLS:

* Installation, Testing, Commissioning GE's D20M, D20M++ and D2OME RTU's.
* Installation, Testing and Commissioning of GE's DAPserver with V400/D400 platform with Protocols:
1. DNP3 Serial, TCP/IP, and UDP/IP
2. IEC 60870-5-101/103/104
3. Modbus RTU, ASCII and TCP/IP
4. Relay protocols: SPA-Bus, SEL, Courier
* Installation, Testing, Commissioning of multi-vendor Intelligent Electronic Devices.
* Sufficient experienced in substation automation and MBSC (MicroProcessor Based Substation Control).
* Sufficient experienced in various SCADA software and hardware interfacing.
* Installation, Testing, Commissioning, Operate and Maintain Telecom equipments such as:
Microwave/UHF/VHF radio transceivers, Digital/Analog Multiplexers, PABX and Other Terminating Equipments, Power line Carriers, Protection Signaling Equipment, including Antenna and Waveguide installation and other accessories involving Telephone inside and outside Plants, MDF and Interconnection assemblies.
* Adequate knowledge in TCP/IP based equipments.

EDUCATION:

Cisco Systems
CCNA 1 NETWORKING BASICS
CCNA 2 ROUTERS AND ROUTING BASICS
CCNA 3 SWITCHING BASICS AND INTERMEDIATE ROUTING
CCNA 4 WAN TECHNOLOGIES
Centre for International Education
Cebu City, Philippines
January 19, 2007 to May 03, 2008

Bachelor of Science in Electronics and Communication Engineering, BSECE
University Of San Jose Recoletos
Cebu City, Philippines
June, 1987 to March, 1992

WORK EXPERIENCE:

ENGINEER B SCADA/EMS
NATIONAL TRANSMISSION CORPORATION, PHILIPPINES
2003 to Present

1. Responsible for the Instrumentation and Control aspects of the Data Acquisition and Control (DAC) system of the Visayas Regional Control Center/Backup National Control Center (VRCC/BNCC) and Area Control Centers (ACC).

ENGINEER B SCADA/EMS
NATIONAL POWER CORPORATION, PHILIPPINES
2001 to 2003

1. Assists the revisions and updates of the SCADA/EMS database, CRT display definitions and all system software for the Visayas Regional Control Center/Backup National Control Center (VRCC/BNCC) and Area Control Centers (ACC) including all enhancements and upgrading to the system software and real-time database to ensure the reliable and efficient function of the over-all SCADA/EMS system.

2. Assists the implementation of hardware maintenance activities of the computer systems, peripherals, man-machine interfaces, data communication equipment and other computer controlled devices at the Visayas Regional Control Center/Backup National Control Center (BNCC), the various Area Control Centers and the automated substations in the Visayas Grid.

Equipment involved:
* RTU'S: D20M, D20M+, D20M++, D20ME: GE Harris
* IED'S: DMMS 300 series, SHARKS, SATEC, NEXUS SIEMENS AND AREVA
* Converters: RS232/485
* XA21 Systems
* REALFLEX System
* PLC's: Siemens
* MMI's

SR TECHNICIAN TELECOM DIVISION
NATIONAL POWER CORPORATON, PHILIPPINES 1998 to 2001

- Assists the Installation, Testing and Commissioning of electrical and electronic equipment such as Power Line Carriers, Analog/Digital Microwave and UHF Radios, Digital Telephone Equipment, Multiplexers, Digital Cross Connect Systems and Microwave Supervisory Alarms and Control Systems.
- Coordinates with other groups within the division regarding interrelated work activities.

TECHNICIAN D TELECOM DIVISION
NATIONAL POWER CORPORATON, PHILIPPINES 1995 to 1998

- Undertakes preventive/Corrective maintenance of various telecom equipments.
- Performs necessary corrective maintenance and troubleshooting of various Telecom Equipment including Microwave, UHF, Multiplexers, Radio Supervisory Alarms and Controls, PABX and other accessories
- Performs replacements or revisions in the telecommunications network.
- Performs analysis and troubleshooting of equipment or system.
- Performs periodic adjustment and calibration of various telecommunication equipments.
- Prepares and updates wiring lists and schemes for reference

Equipment involved:
* 2Ghz, 7Ghz Quadra link radio, HARRIS
* UHF radio, MDS
* FOX 515, ABB
* Multiplexers, TELCO
* PABX, HARRIS
* POWER LINE CARIERS, SIEMENS
* 48Vdc system, CHLORIDE

SALES ENGINEER,
GRAM INDUSTRIAL, INC. - 1993 to 1995

- Handles most projects in breweries: Automation of bottling station

TRAINING:

FOREIGN TRAINING:
* REF 54X & CAP505 MAINTENANCE, REC 561 & CAP540 Maintenance and MicroSCADA Maintenance & Administration
9/27/2005 to 10/5/2005 CCE, LJUBLJANA, SLOVENIA

* UTILITY COMMUNICATIONS SYSTEMS
Power line Carrier ETL 500 Rel.3
Teleprotection NSD 550
9/17/2001 to 9/21/2001 ABB University SWITZERLAND

LOCAL TRAINING:

* INFORMATION TECHNOLOGY PLANNING AND MANAGEMENT
09/26/2007 by Comfac Global Group

* SOLID WASTE MANAGEMENT TRANING
07/06/2007 Transco In-house Training/Seminar

* STANDARD FIRST AID TRAINING
07/05/2007 Transco In-house Training/Seminar

* LOGICAL UNIT INTERFACE (LUI) DATABASE AND HARDWARE MAINTENANCE TRAINING
02/27/2007 to 03/02/2007 Transco In-house Training/Seminar

* TESTING AND COMMISSIONING OF SIEMENS MICROPROCESSOR
BASED S/S CONTROL (MBSC)
01/16/2007 to 01/19/2007 Transco In-house Training/Seminar

* RELIABLITY CENTERED MAINTENANCE
6/27/2006 to 6/29/2006 TransCo In-house Training/Seminar

* APLIED ANALOG ELECTRONICS
3/27/2006 3/31/2006 30 IECEP-TESDA

* GE FANUC Quick panel and Programmable Logic Controller
3/10/2006 JEDD Technologies Corp.

* TEMPERATURE MONITORING AND LOAD PREDICTION SYSTEM
2/2/2006 to 2/3/2006 J-Power Systems Corporation

* UPS SYSTEM, AC/DC PANELS, & EMERGENCY GENERATING SETS
1/27/2006 to 1/27/2006 Energy Premier & Services, INC.

* Introduction to RDBMS and SQL
8/17/2005 to 8/19/2005 TransCo In-house Training/Seminar

* SAFETY ORIENTATION SEMINAR
7/16/2004 to 7/16/2004 TransCo In-house Training/Seminar

* PLC Siemens S7-200 Series
5/22/2004 to 7/10/2004 CITE (Center fro Industrial Technology And Enterprise)

* REALFLEX INSTALLATION AND MAINTENANCE TRAINING
6/4/2004 to 6/4/2004 TransCo In-house Training/Seminar

* XPAC PRO, PC FOR THE MANAGER AND PC NETWORKS AND TROUBLESHOOTING 7/5/2004 to 7/9/2004 TransCo In-house Training/Seminar

* RTU (GE HARRIS D20) TECHNICAL TRAINING
12/29/2003 to 12/30/2003 TransCo In-house Training/Seminar

* ISO 9001:2000 Internal Quality Auditing
6/18/2003 to 6/18/2003 TransCo In-house Training/Seminar

* ISO 9000: 2000 5S+1 AND EFFECTIVE RECORDS MANAGEMENT SEMINAR
11/22/2002 to 11/22/2002 TransCo In-house Training/Seminar

* SUBSTATION OPERATION/MAINTENANCE
Protective Relaying
11/20/2002 to 11/23/2002 National Power Corporation

* SUBSTATION OPERATION/MAINTENANCE
Power Metering
11/7/2002 to 11/8/2002 National Power Corporation

* SUBSTATION OPERATION/MAINTENANCE
High Voltage Power Equipment
10/22/2002 to 10/24/2002 National Power Corporation

* SCHEMATIC DIAGRAMS AND LOGIC CIRCUITS
8/28/2002 to 8/29/2002 National Power Corporation

* OPTIONS, OPPORTUNITIES AND PERSONAL SUCCESS SEMINAR
7/22/2002 to 7/24/2002 National Power Corporation

* FIBER OPTIC SPLICING AND MAINTENANCE TRAINING
3/19/2001 to 3/20/2001 Hyundai Engineering & Construction Co., LTD.

* MODERN BROADCAST AUDIO PROCESSING
11/8/1998 to 11/8/1998 IECEP-TESDA

* PRINCIPLE OF PCM SYSTEM
11/8/1998 to 11/8/1998 IECEP-TESDA

* DIGITAL TELEPHONE SWITCHING
7/9/1998 to 7/9/1998 IECEP-TESDA

* INTERNET
4/26/1998 to 4/26/1998 IECEP-TESDA

* FIRST AID & BASIC LIFE SUPPORT TRAINING COURSE
5/18/1998 to 5/22/1998 IECEP-TESDA

* POWER LINE CARRIER SYSTEM ESB 2000i DIGITAL TELEPROTECTION
SIGNALLING SYSTEM SWT 2000D
11/17/1997 to 11/17/1997 SIEMENS AG

REFERENCES:
Will be provided

BIRTH DATE: October 13, 1970

LANGUAGE: English

PROFIECENCY LEVEL: Conversational

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2951 to 3000 of 4805)

Go to Search Parameters...

Brief Description

I have the EIT license and took the PE Exam on April 2009. Familiar with SAP 2000, Staad Pro, Mathcad, AutoCad, and ABAQUS. Academic experience in Civil/Structural Engineering, and professional experience in Environmental Engineering. I am looking to relocate to the Boston Area.

9 years operating cranes (stevedoring); 1 year marine construction

12 years of experience in project management, site supervision, shop supervision, estimation & costing, tendering, inspection, testing and commissioning of cross country pipeline and heavy fabrication

I'm Ahmed Mohammed Mousa Gaad with an Egyptian nationality working as Applications Senior Developer looking for the honor of joining an organization that has a reputation of excellence in its field such as your company.

Pipeline construction Engineer with knowledge in Piping Design

Supervisor Mechanical,Supervisor Turbines,Mechanical Technician,DCS Operator,Turbine Technician

Professional contract negotiator & administrator

Project Engineer - Electrical Electrical Engineer with (15) years of experience in multi national projects in India (4 years) and Middle East Power projects (11years) Construction and Project Management field especially in High Voltage Substations and Power Station environment

11 Years of Experience in implementation of the General Safety of Employees, equipments & Work Permit System, Accident Investigation & analysis, Identification of actual & potential Safety Hazards in respect of Health, Safety & Environment, Carrying out project safety inspection, Job Safety Analysis

Highly qualified geotechnical engineer with sound engineering knowledge and judgement to serve the industry efficiently.

HSE Learning/Development Professional seeking position in an industrial setting.

2:1 Honours degree in construction management and Engineering.

Landscape Architecture, Designer, Autocad Draftsman

Looking for career enrichment opportunities in Sales & Marketing, Business Development, Technical Services, Operational Manager, or Telecom commercial consultant with a frontline organization

23 years in safety field in Petroleum Refineries, Petrochemical Plants, Pipeline Projects, Well Services, Wireline Operations, and Wastewater Treatment. 8 years with Safety Instructor tasks, 7 years in Construction Projects, 5 years with Q/A Q/C tasks, and 7 years in Managerial level

Fire Safety Engineer

Challenging business financial management position specializing in accounts and budgeting

Material Controller with 4 year experiance

i have 17 years experence in the field of instrumatation covering industries like refinrey petro chemical and power plant

Experienced Helper

As a Projects Management Professional with 12 years of diversified experience in GCC countries and India, I managed, coordinated and successfully completed prestigious EPIC contracts with multinational and state owned clients such as Qatar Petroleum, RasGas, Fluor, CB&I, Petroleum Development of Oma

Communications skills, Team player, Document Control, Information Management, Archivinng, Scanning & EDMS

Highly Trained Manager

I have a wide on and offshore range of experience in heavy equipment installation, commissioning and maintenance. Managing and supervising day-to-day preventive maintenance.

Environment, Health & Safety Manager in a Manufacturing and Software Research & Development facilities with 6+ years of exp.

KEY SKILLS: Document Control, Data Control, Administration, Project status update, Web Designing & Programming in ASP.NET, VB.NET, Web Applications, and Access Programming.

Experiences as QA/QC inspector and Welding in the Inspection sector at various International & national Company. Employment within the Oil & Gas, Power Plant, Structural Steel, Pipe Mill, Floating Production Storage Offloading FPSO (Offshore), Platform Modification (Offshore), Refinery and Pressure

Engineering Analysis :CEASER - II (STATIC analysis),PDMS,Programming language ¡§C¡¨, AutoCAD, SolidWroks, Ansys, Primavera, Elite, Ms-Office, Excel, Word, Windows Xp, 95.

India if any suitable post for me sent mail

electrician ph.770-969-8211

Experienced equipment operator, mechanic, welder looking for a good company that appreciates skill and commitment.

B.Sc. HONS with 7 years of expe. in HSE field in oil & gas secter

Quality Assurance, Quality Control, Inspector, Sr. Inspector, Sr. Surveyor, QA/QC Inspection Engineer– Supply / Construction, Quality Coordinator / Administrator, Procurement Quality Inspection Services Manager / Coordinator, Expeditor, Lead Mechanical Engineer.

Project Coordination

I would like to work in IT department to give the company from what I gain experiance and knowledge

PDS, Micro Station, AutoCAD

Designing, putting on service and managing 9 years whole logistics of implementation a national network for 10 billion clients

WinPCS Specialist / Turnover

Safety Professional

Cost Controller - B.Sc. Degree in Commerce Accounting Branch

I am flexible, reliable, company oriented, team player. I am fluent in French as well as English and I have learn Spanish.

Planning/Scheduling Engineer - Specilization in Primavera P3- Having 10years of experience in Oil, Gas, Refinery, Power & ME sectors worked under different Prestigious organisations like PDO, BP, QP, ADNOC, Bechtel, Snamprogetti, Sumitomo Corporation, HHI, etc - 6Yrs. in Planning & 4Yrs in Site(E&I)

Post Graduate in Soil Mechanics and Foundation Engineering, professionally qualified Geotechnical Engineer having about TEN YEARS of work experience. Mr. Madan Kumar has comprehensive knowledge and vide experience of consulting services as a Geotechnical Engineer

I have wide experience in field of inspection for petroleum oil and gas project. With multi national companies using international standards and specification. I worked in middle east, Far East and Kazakstan. You can contect to any of company which I worked and confirm with them.

With more than 17th years of experience in performing design engineering and constructions on various facilities relating to Chemical Plant, Petrochemical Plant, Oil and Gas, Refineries, Commercial and Industrial Projects. Applies standard design principles and theories to complete assignments. Util

Procurement Manager

Lead Instrumentation Technician

Electrical Power Engineer, fresh graduate

Installation, Testing and Comissioning of various SCADA and Telecommunication related equipments

Highly experienced project professional with broad engineering, maintenance and construction experience. Competitive by nature with a consistent focus on the “Bigger Picture”. Outstanding track record and highly adept at managing high-criticality maintenance and construction projects.

First Prev 51 52 53 54 55 56 57 58 59 [ 60 ] 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out