Resume - Refractory field engineer, 40 years global experience in refractory/furnace cons...

Misco Jobs

Resume #77119

CONTACT INFORMATION:
View contact information...

OBJECTIVE

To meet new challenges and widen the scope of possibility within this field. Also to increase awareness of importance of being environmentally friendly.
I am a time served refractory mason, with 40 years experience in refractory/furnace construction worldwide. My strengths are in the field, planning, training,build, and quality control, with the ability to communicate, and promote teamwork.

RECENT HISTORY
08/07-11/07
Dubal Dubai U.A.E.
Carbon bake oven,32 cell demolish/rebuild
Duties
Mobilization,material planning,site supervision.

10/ 06-06/07
Aluar Argentina-144 cell pot line,new installation.
Duties
Training of local masons, quality control,consultancy
02 / 06 –06 /06
Esso Refinary, Fawley, UK. Site Supervision PV2 – PS2. Turnaround.
Duties:
Site Management, Supervision, Quality Control on Various Refractory installations. Inc. Brickwork, Castable Gunite, Resco, Ceramic Fibre.
With Eastern European workforce.

08 /05 – 01/06.
Dubal Dubai, U.A.E.
Carbon Bake Furnace. 32 Cell Demolish/Rebuild.
Duties:
Sat up an Ran Training School for Asian Masons (200) Prior to Contract. During Contract was Responsible for build. Quality Control, Daily Surveys, Material Supply.

01/05 – 05/05.
Dubal Dubai, U.A.E.
Carbon Bake Furnace. 32 Cell Demolish/Rebuild.
Duties:
Training School, Demolition, Mobilisation, Survey, Labour Placement, Material Control, Build, Quality Control.

02/03 – 08/03.
Alcan Rotterdam Holland.
Carbon Bake Furnace, new Construction, Supervision.
Duties:
Setting out Labour Placement, Surveys, Material Control, Quality Control, and Liaison with Interpreter (Portuguese workforce).

Alcan, Fort William, Scotland
Pot Line Re-build
Duties:
Taking pots offline for demolition. Survey, re-build and put back on line. Various times between 2002 and present.

EXPERIENCE

* 1992 – 2000.
Quality control consultant For tunnel kiln project Johor Malaysia
Employed as Refractory Mason for most of the major glass furnace construction companies.
Employed as site Supervisor on Thermal Oxidiser contract for I.C.I. Taiwan.
Also employed as mason on Thermal Oxidisers on various sites throughout UK and Europe.

* 1984 – 1992 Director of own company.

* 1978 – 1984 C&W International: Field/Site Engineer.

* 1977 – 1978 Build and commission heat treatment plant Tabriz, Iran

* 1972 – 1976 C&W International: Mason.

* 1967 – 1972 British Steel: Apprentice Mason.

EDUCATION

General academic education.
Graduated 1972 from Foley Technical Collage of Engineering City& Guilds, Advanced brickwork.

EXPERIENCE

ALUMINIUM

Was directly involved in the installation, rebuilding and refurbishment of smelting and holding plants at major aluminium worldwide incl. DUBAL (Dubai), ALBA (Bahrain), VALCO (Ghana), ALCAN (Britain, Europe and Nigeria). Duties incl. Recruitment and control of local labour, building of units (on tools), setting up and running training programmes for masons at VALCO, DUBAL,and ALUAR.

COPPER

Main contract while running own business was to supply complete refractory service to I.M.I. Copper refinery was responsible for design to anode casting furnace, as well as all rebuilt and repair to converters, reverbs, blasts anode casters.

HEAT TREATMENT

Extensive background in this industry, Sealed Quench, Cyclic Anealers. Carburisers Tempering Furnaces. Installed and rebuilt many of these units with own company mostly at British car manufacturing plants.

STEEL

As well as serving apprenticeship with British Steel, have also been involved on many installations of walking beam type re-heaters and soaking pits as Superintendent/Site Manager.

OTHER INFO

Industrial waste, sewage, refuge incinerators (Foreman) ABU DHABI National Oil Company (Site Manager) for new installation of primary and secondary heaters on Ammonia Plants, AKZO, Holland (Foreman) also for installation of primary and secondary heaters.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 3301 to 3350 of 4814)

Go to Search Parameters...

Brief Description

Fourteen years of consistent and solid work experience in the field of Instrumentation, out of which the past ten years are in the Middle East. Certified in Instrumentation Mechanism by the Government I.T.I. from T.R. Pattinam, Karaikkal, Pondicherry, India during the year 1990-92.

Achieve sustainable profit growth and customer happiness using technology to reduce costs and increase effectiveness of employee time.

Certified Safety Professional with over 20 years experience, in multiple industries, including oil and gas, medical, transportation, environmental and manufacturing.

Electrical Engineer / Site Engineer / Supervisor / Draftsman

Quality Control professional

Safety Technician

Rotating & reciprocating equipment technician

Maritime chief engineer with more than 20 years on bord sea-going ships and 7 years as HVAC Technician and Electrician for shore-based companies,searching now a shore based job in accordance with education and experience.

Architectural Technologist student seeking summer employment Some construction experience good AUTOCAD skills

Mechanical engineering professional in post-contract administration and expedition. Legal, project, and expediting experience in Europe and the Far East in plant, marine, and, offshore projects.

25 years Industrial Construction experience as a Construction Manager, Superintendent, Project Coordinator, Estimator and Maintenance Planner.

Project Management, Supply Chain Management, Human Resources Management

Refractory field engineer, 40 years global experience in refractory/furnace construction in a variety of industries inc. aluminium, copper, iron&steel, cement, glass, petrochem, & industrial waste

Structural Steel Detailer, Tekla v15, Pro Steel v17 Auctocad 2008

Site Controller / Accountant <<< Cost Controller

Senior Geoenvironmental Engineer (Contaminated Land, Geotechnical) with over 5 years UK experience

I have 7 years experience of electrical installation onshore and offshore Oil / Gas Industry complemented with a 4-year recognized apprenticeship.

Qualified, results-producing Management Professional with experience steering and directing all aspects of operations, administration, budgeting, and equipment maintenance. Successful in managing multiple projects with compelling priorities involving program development.

Professional Land Surveyor

International Operations- Foreman, Diamond Driller, RC Driller, Long Hole Driller, Blaster etc.

Electrical Engineer and Computer Sciencer

Twenty years experience in global recruitment of oil & gas people: including manpower planning for companies such as AkerKvaerner, ConocoPhillips, Exxon, KBR, Fluor, Shell, Technip and Woodside for oil & gas projects in Australia, Brunei, Indonesia, Malaysia, Singapore and Korea.

Residing in Kuwait for over 12 years, Excellent 8+ years of experience with US Forces operated in Kuwait, Iraq and Afghanistan. Highly competent contracts administrator with extensive experience administering multi-million-dollar contracts for major projects in the GCC & Middle East.

Electrical-Mechanical Engineer graduate from National University of Engineering with experience on electrical distribution projects and projects execution in the oil and gas industry. I have the ability to interact and communicate with all disciplines in the engineering field. I am competent in work

Multi-skilled engineer

8 years of professional experience in Administration and personal assistance.

I am a qualified Metallurgy and Materials Engineer with international research and training experience. I am a person with strong organizational skills and am very confident in analyzing and solving problems with positive outcomes. My past studies in Metallurgy and Materials Technology and the resea

I am a qualified and experienced Medic or Paramedic and have vast HSE/Safety/OHS/QHSE experience and qualifications. I am also a qualified rescue technician and am very well versed in emergency co-ordinating.

Proficient in reading mechanical drawings and designing using Auto Cad, CATIA, NX-IDEAS.Strong Technical writing and presentation skills along with good hold in MS - Office.Master of Engineering (G.P.A - 10.33 out of 13)(2008- 2009)University of Windsor.

Summary of Qualifications: Proficient in this engineering software: 3D - PDS Equipment, Piping modeling/design,Isogen, SmartPlant Review, Microstation, AutoCad. Industries: Nuclear, Energy, Power, Petroleum / Refinery, Chemical, Logistics, Transportation, Manufacturing and Defense.

I am working as welding inspector in oceanreeng ois project Ras Gas. And befor date of 28 april 2007 working with EIL project Burj Dubai Development & GRAVITY BASE STRUCTER IN DUBAI DRY DOCKS.

Civil/Structural/ Architectural Designer with extensive knowledge of petrochemical and oil and gas industry. Expertise in 3d Bentley Structural and knowledgeable in Staad Pro

Develop and Execute marketing strategies/plans by analyzing current business situations in order to meet group's business objectives and also to maintain and increase sales. (Advertising/PR/Events/Promotions/Exhibitions/Market research)

Material Controller/ Expeditor

Mechanical Engineer, technical support

Eco-friendly Architect, Revit, Autocad, 3D max, SketchUp, Photoshop, Flash, Coral-draw, Illustrator, Rhino3D.

E&I Construction Supt.,Inspector, Commissioning Eng. 30 years plus experience, in various industries, at various supervisory levels.

Oil & Gas Exploration Project Manager - Spring Creek, Nevada resident - Forest Service, BLM , Tribal, State & Federal liason experience

Instrument Engineer and technician with 27 years experience in design, installation, commissioning, start-up, operations and maintenance of oil and gas facilities worldwide.

Sales, Engineering Project Manager

12 Years of experience in the Project Management, Planning, Controlling, Production and Material Management

15 years experience in erection commissioning and maintenace of field instrumentation , DCS, PLC, SCADA ,VFD, LT PANELS , in petrochemical, steel, pharma,copper plants

I am Mechanical engineering graduate with 18 years of experience with the Project Management & execution, Procurement & Contract Management. Executed Tendering, Commercial Evaluation, Negotiation, and Contract Administration for mega projects in Hydrocarbon and Oil & Gas sector. Involved in Concept

Mining and geological engineer from the university of Liege with a specialization in geophysical methods and geotechnics.

Project Manager, Field Engineer, Commissioning Electrical Switchgear

ISO/ASNT certified Vibration analyst ,More than three years of engineering experience ,Analytical skills and self learning ability,committed to any work unconditionally,Able to work under pressure,Able to liaison between technical groups ,Proven ability to improve efficiency

Free! Varied and broad experience in construction, on/offshore projects, mechanical & piping, shipping, logistics, materials and QA-QC all mainly in the oil & gas industry for over 35 years. Countries worked: Eq/Guinea-Nigeria-Egypt-Ivory Coast-India-China-Canada-Spain-Holland-UAE-Oman-Qatar-Malaysia-Indo

Have been a rigger/ironworker for 10 years+. Have experience in welding and have done this on/off for 8 years.

Mechanical Engineer having 8 years experience in Petrochemical, Oil&Gas sector as Project Planning Engineer, looking for suitable position with family staus

Total eleven years of experience in Refineries/Petrochemicals, Chemical & Oil Port Terminal, Offshore Platform projects etc. Presently working with Foster Wheeler, Singapore and Previously worked for prestigious organizations like, Technip-France, Snamprogetti SpA-Italy, Indian Oiltanking, Indo Gulf

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 [ 67 ] 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out