Resume - Looking for a mechanical engineering position.

Misco Jobs

Resume #7719

CONTACT INFORMATION:
View contact information...

Date of Birth 14.07.70

Sex Male

Marital Status Married

Nationality Indian

Passport details Passport No: T-632406
Place of Issue: Chennai
Date of Issue: 31.01.1995
Date of Expiry: 30.01.2005

Driving license details

Country License no Type of vehicle

India 5471/ney Light motor Vehicle &Motor cycle with gear
Saudi 179457 Light motor Vehicle

Educational Qualification:

Degree Discipline Period Place of study

Bachelor of Engineering.
Mechanical Engineering

1988- 1992
Regular
Madurai Kamaraj
University, Madurai.

Post Graduate Diploma
Materials Management

1992-1993
Correspondence
Annamalai University, Chidambaram.
Welding & NDT Qualification:

Subject Institution Period of study Certificate no.
AWS-CWI American Welding Society December 2003 01011011
RT-Level III American society for Non-Destructive testing November 2003 107863
(http://www.asnt.org/)

UT-Level III American society for Non-Destructive testing March 2004 107863
(http://www.asnt.org/)

MT-Level III American society for Non-Destructive testing March 2004 107863
(http://www.asnt.org/)

RTFI-Level II Industrial Quality Concepts, Chennai. December 2000 203007
PT- Level II Kalva Institute of NDT&Quality Management, Madras. June 1995 98/PT-II/151/M
Welding fundamental for Supervisors & Engineers Advanced Training Institute, central government of India, Madras. February 1995 027598
Process Instruments (Thermal Plants) Advanced Training Institute, central government of India, Madras. March 1995 027704

Experience details: Abstract

Company Year Job title
Babu Engineering Corporation, Neyveli, India. May 1992-June 1994 QA/QC Supervisor
Wens NDT Services, Chennai, India June 1994-June 1995 NDT Technician
NDT&CCS, Dammam, Saudi Arabia. June 1995-May 1998 Site In charge, Senior Radiographer, Film Interpreter, Acting Radiation Safety Officer.
Sonic Inspection Services, Chennai, India. June 1998-October 1998 T, K, Y-Operator.
Husseini Inspection Company, Dhahran, Saudi Arabia. November 1998-Still Senior NDT Technician, & NDT Specialist (NDT Inspector).
Experience Details: Briefly

1) Year: May 1992-June1994
Company: M/s. Babu Engineering Corporation, Neyveli, India.
Job title: QA/QC Supervisor.

a) Neyveli Lignite Corporation, Neyveli, India.
Job Description: Shutdown of Power Boilers.
My Job has to:
(i) Execute Leak test on the Boiler walls & Boiler tubes for the duration of
Shutdown.
(ii) QA/QC aspects involving scheduling of technicians for RT, UT, MT,
PT. Film Interpretation according to ASME Sec VIII- Boiler and Pressure
Code, and ANSI B 31.3.
(iii) Witness for Eddy current test at inside the boiler tubes, for corrosion and
Wall thickness lessening.
(iv) Build up the written procedure and manuscript of each and every effort.
(v) Coordinating with third party inspection.

b) Mettur thermal power plant, Mettur, India.
Job Description: Dismantling power Package Boiler from Mettur and
Erection & commissioning at North Madras Thermal
Power Project.
My Job has to:
(i) Full involvement with my group, take apart the Power Boiler from
Mettur to North Madras. And assembly at North Madras Thermal
Power plant.
(ii) Modification of pipe lines according to clients necessities, and
Recommend to taking weldments by RT& UT.
(iii) Film Interpretation according to ASME Sec VIII, and ANSI B 31.3

2) Year: June 1994- June 1995
Company: M/s. Wens NDT Services, Chennai, India.
Job Title: NDT Technician.

a) Tamilnadu Petro Products, Chennai, India.
Job Description: T&I activities.
My job has to:
(i) U.T. Inspection of weldments. (T.K.Y. sections)
(ii) Corrosion monitoring by UT/ RT.
(iii) Holiday Inspection& External coating thickness measurements of pipes.
(iv) Hardness testing of vessel weldments.

b) Madras Refinery Limited, Chennai, India.
Job Description: T&I activities and Shutdown.
My job has to:
(i) U.T. Inspection of weldments. (T.K.Y. sections)
(ii) Corrosion monitoring by UT/ RT.
(iii) Hardness testing of vessel weldments.
(iv) Film Interpretation with ANSI B 31.3 & ASME Sec VIII.
(v) Involving with Eddy current test groups for internal corrosion of
Heat Exchanger pipes.

c) Indian Oil Corporation, Chennai, India.
Job Description: T&I activities as on tank farm areas.
My Job has to:
(i) Perform NDT jobs at the tank farm area.
(ii) Alteration of pipe lines according to clients requirements, and
Suggest to taking weldments by means of RT& UT.
(iii) Corrosion monitoring by RT/ UT methods.
(iv) We have did according to clients requirements Post Weld Heat
Treatment.

3) Year: June 1995- May 1998
Company: M/S. NDT & Corrosion Control Services, Dammam,
Saudi.
Job title: Site In charge, Senior Radiographer, Film
Interpreter, Acting Radiation Safety Officer a) R&D Building, Saudi Aramco, Dhahran, Saudi Arabia. July 1995- August 1995.
(i) I have joined as a Radiographer (Temporary- Vacation relieve).
(ii) During this period, I have performed NDT activities at several areas, like Al-Hasa Bulk Plant, Dhahran Bulk Plant, Qatif Bulk Plant & King Fahd Airport terminal (Aramco area).

b) Rabigh Refinery, Saudi Aramco, Rabigh, Saudi Arabia. September 1995-October 1995.
(i) I have joined as a Radiographer (Temporary- Vacation relieve).
(ii) During this period, I have merged with Inspection department, and involved in T&I activities, and On Stream Inspection activities.
(iii) We are specialized in Compressor and Tank farm inspection activities. (UT & RT)

c) Jeddah Refinery, Saudi Aramco, Jeddah, Saudi Arabia. November 1995- March 1996
(i) I have joined as a Senior Radiographer and Film Interpretator. (Temporary- Vacation relieve)
(ii) Radiation source handling, Issuing and receiving from radiographers, and RTFI according with ASME Sec VIII, ANSI B 31.3, API 1104.
(iii) And, I have involved T&I activities & Shutdowns with Inspection teams at several units.
(iv) Corrosion areas monitored by RT/ UT methods. And <2" Diameter pipes or nipples are covered by RT methods for corrosion monitoring.

d) SAFCO, Dammam, Saudi Arabia. June 1996- July 1996.

(i) To perform RT/VT/MT activities on the Heavy vessel and tanks
For SAFCO.
(ii) Hardness testing and Coating thickness are performed inside the vessel.
(iii) Worked as a NDE Inspector, and merged with the inspection unit, and concerned in the T&I activities for their company.
(iv) Heat Exchanger tubes tested with Eddy Current tests with my groups.
(v) MT/PT inspection carried out on the Tank inside Circumferential and Longitudinal welds.
(vi) Witness for Holiday testing of external coating of the pipes.
(vii) And internal coating verified by Radiography.

e) Consulated Contractors Company, Rastanura refinery extension Project, August 1996- November 1996.
(i) During this period, we have done several NDT jobs like RT& MT & PT for Saudi Aramco.
(ii) And, oversee training programs for level II individuals.
(iii) Build up the written procedure and Document the RT& MT reports.
(iv) Coordinating with third party inspection, while auditing time.

f) M/s. SRB Limited, Shaybah GOSP construction, Shaybah, January 1997-March 1998
(i) Job description is to conduct RT, MT, PT at Wellheads, Trunk lines and flow lines for their contracts for Saudi Aramco.
(ii) More than 20, 000 joints, we have taken Radiography and more than 3000 joints we have conducted MT& PT.
(iii) I have worked as a Site Coordinator, Senior Radiographer and Film interpratator, and acting Radiation Safety Officer.
(iv) I am the one, trained and certified from my company, to shift the source from Radiation camera to Lead pot and lead pot to Radiation camera.
(v) Administer training programs for Level I and Level II individuals in the specific NDT methods for which he is certified.

g) Rabigh Refinery, Saudi Aramco, Rabigh, April 1998-
May 1998.
(i) I have joined as a Senior radiographer in Rabigh Refinery.
(ii) I have involved with Inspection groups, and performed NDT activities on T&I, PM shutdowns.
(iii) And On stream Inspection, FIR Programs also we have covered.
(iv) For personnel reason, I have resigned my job, and return back to India.

4) Year: June 1998 – October 1998
Company: M/s. Sonic Inspection Company, Chennai, India.
Job title: T, K, Y- operator.
(i) I have joined as a T, K, Y- operator, and performed T, K, Y, testing at NEPC-MICON Wind Power Mill, for their products.
(ii) Afford technical support to company personnel by recommending NDT methods for specific problem in their products at AUDCO Wind Power Mill.
(iii) Build up the written procedure and document of each and every work.

5) Year: November 1998- March 2000.
Company: M/s. Husseini Inspection Company, Dhahran, Saudi
Arabia.
Job title: Senior NDT Technician.

a) Udhailiyah Operation Inspection Department, Udhailiyah,
Saudi Aramco, November 1998- March 2000.
(i) I have joined as a Lead U.T. Technician, and I governed nearly 25 plants. (Gas Oil Separation Plants, and Water Injection Plants, & Khuff gas Manifolds)
(ii) I have merged with Inspection unit and I have involved several NDT/ QC activities.
(iii) We have performed several activities at T&I, and PM Shutdowns.
(iv) We are monitoring FIR, and on stream inspection procedures.
(v) During this period, most of the corrosion areas, I only found from the plant pipes from UT corrosion survey.

6) Year: April 2000-Still.
Company: M/s. Husseini Inspection Company, Dhahran, Saudi
Arabia.
Job title: NDT Specialist a) Southern Area Corrosion Control & Inspection Department,
South Ghawar Inspection Unit, Udhiliyah, Saudi Aramco,
April 2000- June 2003.
(i) I have joined as a NDT Specialist, and I have performed Inspection activities at Hawiyah and Haradh areas.
(ii) I have involved with the Inspection unit, and performed on stream inspection activities, FIR activities.
(iii) Develops the written procedures for both basic and advanced NDT methods of RT, MT, PT, UT, MFL, VT & ET.
(iv) Perform Interpretations of National Codes and Standards.
(v) Interpret results of specialized NDT examinations and develop reports detailing the findings of those examinations.
(vi) Setup and administer training programs for Level I and Level II Individuals in the specific NDT methods.
(vii) Make frequent On-site visits to Operations facilities to review Job Scopes and make recommendations to assure the optimum results are achieved from the NDT service provided.

c) Southern Area Producing Engineering Unit, South Ghawar
Inspection Unit, Udhailiyah, June 2003- Still.
(i) I have joined as a NDT Specialist (NDT Inspector), and I perform inspection activities with the Inspection Department at Khurais& Hawtha area.
(ii) I have to act as a mentor for Saudi NDT Technicians and develop their ability to become fully certified in Various NDT methods.
(iii) Make frequent On-site visits to Operations facilities to review Job Scopes and make recommendations to assure the optimum results are achieved from the NDT service provided.
(iv) Perform Interpretations of National and Standards. (Like- ASME Sec VIII, ASME Sec IX, ANSI B 31.3,31.6, AWS D1.1, API 1104, API 653)
(v) Provides technical assistance to operational personnel by recommending various NDT methods for specific problems.
(vi) Witness for the Eddy current test of Heat exchanger tubes for internal corrosion and wall reductions.
(vii) And witness for the Holiday inspections and external coating thickness.

(viii) Develop written procedures for both basic and Advanced NDT methods of RT, MT, PT, MFL, VT, and ET.

I am very sincere and hard working. I have believed that there are no shortcuts to success. Now, I am looking for a more challenging job. So, that I have applied for your company.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 4001 to 4050 of 4814)

Go to Search Parameters...

Brief Description

Inventory Management, Materials Planning, ERP, Heavy fabrication, Production planning, Project Management, M.S Project, Supply Chain, Manpower handling, ALPS, Erection, MS Office, Internet Researcher, MATLAB, C, C++ and AutoCAD

Materials Manager, Barge foreman, Assistant superintendent, General assistant

In addition to academic work, my experience also includes working voluntarily, part-time and full time with both local and international organizations, as you will see in my CV. My work in these organizations hinges on working at community levels in various projects and researches.

Project Planning, Scheduling and Forecasting, Progress measurement and reporting, Man-hour tracking and control, Project Control, Project and Maintenance Management/Planning/Scheduling. HND Computer Science, EMsc Project Management

Automation and Instrumentation Specialist. College diploma in industrial electronics (Teccart Institute) option: regulation, instrumentation and automation. Graduated with distinction, May 1999.

SIR I am mechanical engineer,if my qualifation are suitable for any job please contact me.i can give good results and new method for doing any work.

35 + year mechanic

Diverse experience in the fields of failure analyses, corrosion of steels, protective coatings and paint film systems, welding and materials selection, complemented by a strong background in mechanical engineering. Excellent communication and organization skills, dedicated to quality and accuracy wi

15+ years experience as a highly motivated corporate and leisure travel consultant Able to communicate with people at all levels of responsibility. Experience with Inside Sales - successful cold calling and B2B sales and customer service Ability to successfully relate to and work with diverse peop

Geologist

I am proficient in critical thinking, research, and writing skills; the spirit of teamwork; and the ability to effectively communicate, both verbally and orally, graphic design and functionality to an audience. I possess a wide range of graphic skills from manual to computer aided.

Twenty five years experience in Safety, Health and Environmental Inspections, Supervision and Management

MSc Engineerign Geology, experienced in geotechnical engineering designs and SI

As a compboss experiouns 5 years in pipeline contracting company

Vast experience in Engineering, Construction, Mining and Design:

BS EE, Program/Project Management, Business Development, MS Project, Oracle Financial Analyzer, Data-Voice Value Added Service projects & business, GSM 900 infrastructure (Ericsson) deep knowledge, Wireless and Service Engineering Planning, MS Office, IP Networking

Bsc (Hons) Surveying, 5 years experience, Competent with setting out, topograghical surveys, mine surveys,cadastral surveys

Logistics, Technology, Transport and Management Professional

Heavy Duty Diesel Technician/Fitter, service field experience, two years supervising/consulting on mining equipment, 10 yrs crane experience (tadano certified), class 1 driver's lisence (air brake endorsement)

More than 4 years experience in Human Resources specializing in Talent Acquisition

International Business Development - Africa/Europe/Middle-East

6++ years experiences of Yokogawa & Honeywell DCS

Electrical Engineer with Project Management experience in construction and power

Power Generation Technician

Support the Implementation of the PROJECT HES MANAGEMENT PLAN for all contractors working at the constrcution site.Review the measures taken to ensure the safety and health of persons at the place of work.

Quality, Health & Safety and Environment Management/Auditing

I have worked in the underground mining industry for 29 years and still enjoy it. I have held many lead and supervisor positions. My last post was Mine Captain for a leading mining contractor. I like being challenged and enjoy learning new things. I can work alone being self motivated or on a team.

ITI Electrician, Diploma Electrical, Computer Diploma, Hardwere & Softwere Knowledge, Apprentischip in Lineman Trade From State Electricity Board

Operations Manager for Geological firm in drilling department. Organize jobs,order supplies,all banking,screening personale,training locals,public relaitons,senior diamond driller.

Unlicensed Engineer, Diesel Mechanic

Apprenticeship exemption granted for the technical in-class component Levels 1, 2, 3

I am an experienced Mechanical Engineer in the field of Design & Welding (IWE) Engineering. I obtained my Dipl-Ing. certificate (equivalent of MSc(Eng.) in Design and Construction of Agricultural and Construction Machinery from the Technical University of Berlin in Germany

Instrumentation supervisor - QP refinaries, Qatar

QA/QC Project Execution Engineer With more than 3 yrs of experience in construction industries

16 years experience as a Safety professional and Paramedic, NREMT-P, Texas EMT-P, Colorado EMT-P, ACLS, ITLS, PEPP, CPR

Diploma in Surveying; Profficient in SURPAC; AutoCad, Vcad

Project Manager, Business Systems Analyst, and Information Developer

Maintenance, HVAC, MAnagement and Supervision, Safety

Looking for a mechanical engineering position.

Having total experience of 14years 11months in Offshore, Onshore, Chemical and Refinery fields with strong PDMS Piping Designing, Draft, Isodraft and PDMS Administration background looking for an opening of PDMS Piping Designer

I have been working as a Marine Piping Designer for 8 consecutive years.I can make good detail piping arrangement drawing of any system using AutoCAD.My experience includes piping arrangement of various system in the Engine Room and Hull Part .I am familiar with class rule and Int'l. standards.

Over 20 years management, construction, production and sales experience dedicated to achieving profitability and delivering outstanding customer service. Energetic professional with exceptional analytical, organizational and people skills. Strong personal ethics and integrity. Treat each customer as

Land Surveyor Crew Chief

My wish would be to integrate a team of safety, contractor or in the respective specialty . My family circumstances having found stability durable. The formation that I received in this field pushes me to gain this environment in which I smell myself much more at ease. Indeed, the hostile sec

Bilingual (English and French) Engineer with +13 yrs Petroleum Production, Wellsite and Operations experience in Oil & Gas and +3 yrs in Construction and Environmental work. Worked for Shell, Vermilion and Maurel & Prom in Africa, Europe and North America. US resident.

30 years in the repair and maintenance of heavy equipment in both shop and field setting.. Supervision experience !

Drafting, estimating, typing, computer literate: MSWORD, MSEXCEL, COREL DRAW, AUTOCAD, POWERPOINT, PIPES & PIPES++

Bilingual, Certified PMP and Six Sigma Greenbelt, self-motivated and client-focused Business Systems Analyst with seven years of global experience as well as experience in the Health/Environment, Public, Financial and IT Sectors.

Fitter Including Machining and Diesel Fitting

Supply Chain and Customer Service Manager - Looking for relocation in Australia or Africa.

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 [ 81 ] 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out