Resume - i have 3 years of experience in structure analysis and design for industrial str...

Misco Jobs

Resume #77227

CONTACT INFORMATION:
View contact information...

Objective: To secure a promising position that offers both a challenge and a good opportunity for growth.

Master of Engineering:Sardar Patel University – Vallabh Vidyanagar, Gujarat, India
Major: Structural Engineering

Bachelor of Engineering:Sardar Patel University – Vallabh Vidyanagar, Gujarat, India
Major: Civil Engineering

Work Experience:

#1 Firm: Shah and Talati Consulting Engineers, Baroda, Gujarat, India (Aug'05-Octo '08)
Position: Structural Engineer
Project: Sandy Creek Energy Station, Riesel, Texas.
Plum Point Energy Station, Osceola, Arkansas.
Oak Grove Power Station, Franklin, Texas.
Client: Roberts & Schaefer Company, Chicago, Illinois
Responsible for Structural analysis and design of a steel Crusher Towers by AISC ASD Standard. The Crusher Towers were around 90 feet high, 36 feet long and 32 feet wide for supporting crusher equipment, Conveyor Feeders, 150T Surge Bins and conveyor drive Pulley at different levels. STAAD2004 was used in analysis and design of the structure. Reviewed submittals and shop drawings during construction stage.

Project: Lumpy Screening building in South Africa
Client: DRA Company at South Africa
Responsible for Structural analysis and design of a steel Lumpy Screening building by South African code (SABS) using STAAD2006 for DRA Company at South Africa.

Project: Torrent Power AEC Ltd at Sabarmati, Ahmadabad, Gujarat.
Responsible for Structural analysis and design of a steel Transfer Towers by Indian Standard. The Tower was around 30 feet high, 20 feet long and 20 feet wide for supporting Conveyor drive frames, belt Pulley at different levels. STAAD2004 was used in analysis and design of the structure. Reviewed submittals and only design drawings.

Project: Damodar valley Corporation at Kolkata, India.
Responsible for structural analysis and design of a Steel Transfer Towers and Store sheds by Indian Standard. The steel Transfer Towers were around 180 feet high, 36 feet long and 36 feet wide for supporting Conveyor drive frames, R.C.C. floors and Bent Pulley at various levels. The Store shed was 50 feet wide, 30 feet high and 90 feet long. STAAD2004 was used in analysis and design of the structure. Reviewed submittals and only design drawings.

Project: Oil and Natural Gas Corporation at Agartala and Baramura, India.
Responsible for structural analysis and design of a Steel Flare Supporting Structures by Indian Standard. The steel Flare Supporting Structures were around 90 feet high, 15 feet long and 15 feet wide for lateral support of Flare Pipes, Cable Trays etc. STAAD2004 was used in analysis and design of the structure. Reviewed submittals and only design drawings.

Project: Indian Oil Corporation Limited at Baroda, Gujarat, India.
Responsible for structural analysis and design of a steel Portal frames, Trusses and its R.C.C. foundations by Indian Standard. Portal Frames were around 36 feet wide and 30feet high with 3 to 5 Bays at 30 feet intervals. STAAD2004 was used in analysis and design of the structure Reviewed submittals and only design drawings.

Project: -Majan Electricity Company (SAOC) Sultanate of Oman.
-Oman India Fertilizer Company (SAOC).
-Sultanate of Oman MUSCAT, Ministry of Housing, Electricity and Water, Directorate General of Electricity.
-ORPOWER-4 Kenya (OLKARIA-III) at Nairobi, Kenya.Indian Oil Corporation Limited at Baroda, Gujarat, India.
Responsible for structural analysis and design of Gantry/Equipment Supporting steel structures and its R.C.C. foundations for 132/33kV Switchyard (Power distribution Systems) by British Standard, BS-5950. STAAD2004 was used in analysis and design of the steel structure. Reviewed submittals and shop drawings during construction stage.

Project: Bhutan Power Corporation Ltd, Malbase, Bhutan, India
Client: Larsen and Tourbo limited, Malbase, Bhutan, India
Responsible for structural analysis and design of Gantry/Equipment Supporting steel structures and its R.C.C. foundations for 220/66kV Switchyard (Power Distribution Systems) by Indian Standard. STAAD2004 was used in analysis and design of the steel structure. Reviewed submittals and shop drawings during construction stage.

Project: - Dhampur, Asmoli, Mansurpur Sugarmills Ltd
- Titawi, Mawana, Nanglamal Sugar Complex
- Abhijeet Infrastructures Ltd.
- Chilwara Sugarworks Ltd.
Client: Siemens Mumbai / Siemens Delhi Limited, India
Responsible for structural analysis and design of Gantry/Equipment Supporting steel structures and its R.C.C. foundations for 132/66kV Switchyard (Power Distribution Systems) by Indian Standard. STAAD2004 was used in analysis and design of the steel structure. Reviewed submittals and only design drawings.

#2 College: Birla Vishvakarma Mahavidyalaya, V.V.Nagar, Anand, Gujarat, India
Position: Visiting Lecturer for six months
Responsible for conducting Laboratories of Engineering Mechanics, Strength of Materials, Analysis and design of Structures.

#3 Miscellaneous:
Responsible for analysis and design of industrial steel trusses, portals, steel buildings etc by Indian standards.

Codes used:- ASCE 7 -98/7-05, IBC 2000, AISC-9th Ed. BS 5950, BS 8110, Indian Codes
Relevant Courses in Masters:- Adv. Structure Mechanics, Stucture Safety and Stability, Structural Dynamics, Theory of Elasticity and Plasticity, Adv. Foundation Engineering, Finite Element Methods, Adv. Structure designs, Theory of Plates and Shells, Adv. Prestressed Concrete, Earthquake resistant design of structures, Cad and detailing of structures.

Dissertation:- Behavior of Ring Foundation on Geocell reinforced sand bed under Static and Dynamic loading. Guided by Dr. A.K. Verma, Dean of Structure Engg. Dept., BVM, V.V. Nagar, Gujarat
Computer Skills:- STAAD.pro, AutoCAD, MS-Office.
Achievements:- Stood First in University with Distinction in Master of Engineering (structure) and Secured Gold Medal.
Extra Curricular:- Associate of The Institution of Engineers, AIE (India) A 538235-2

Reference:- On request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 951 to 1000 of 4798)

Go to Search Parameters...

Brief Description

Over 23 years of rich experience in Technical Training, Erection & Commissioning, Production Planning and control,Safety,Environment,Health, and Quality in the fertilizer industry and Petrochemical industry seek suitable new assignments in Training and Development in Fertiliser,Petroleum,Petroche

concrete/steel laborer, welder, machinist, truck driver.

PROFESSIONAL SKILLS: AutoCAD (All Old & Latest Version), Aconex (Online Document Management System) , MS-Word , MS-Excel , MS- Power Point and Internet etc.

•Knowledgeable in PLC troubleshooting ( Allen Bradley & Siemens Step 7, Omron and Keyence). •With experience in designing low voltage control systems. With experience in machine servicing and troubleshooting •Knowledgeable in Pneumatic & Electro-pneumatic system troubleshooting. •With background in

Geolgist having 2 year experience in construction

More than 15 years experience as a Commercial Manager, Contract Administrator and Quantity Surveyor working with Main Contractors and Consultants in the U.K, Middle East, Caribbean and South East Asia on a variety of Building, Oil & Gas, Civil, Power and major infrastructure projects.

A business development professional with skills in strategic management,project management,communication and public relations,negotiating skills.

Design and construction in bridge and road

D.A.E in Electronics and from last 7 years i am working in the field of CCTV & SECURITY SYSTEM as a SUB ENGINNIER +SALES ENGINNIER IN SAUDI ARABIA

Experienced in drafting commercial buildings, residential for permit processing and for shop drawing.

I am a mechanical engineer with 10 years experience in Material handling, Steel structurals, PEB, Steel buildings industries

Architect/landscape designer/graphics person

Project Control Engineer (Planning, Claims and Cost Control)

6 years from Military with lots of surveying .

Seeking work as heavy equipment operator. Willing to travel. Excellant references.

I'm an civil engineer with 6 years working experience which involving in residential and commercial building contruction as well as segmental bridge and cable stay bridge construction. I'm now being employed as assistant resident engineer for Penang Bridge Cable Stay Replacement Project.

Co-Ordination with all agents & Sub-contractors.

Effective in Inspection Trends and Hazards Identification as per OSHA requirements and standards. Has good ability in presentation of safety reports to higher authorities

Extensive experience in the construction industry in the field of architectural and civil/structural works of residenses, townhouses, condominiums and commercial buildings including interior and exterior finishing details. A highly motivated project supervisor, proven ability to solve site problems.

Occupational Health And Safety Professional, Post Graduate Cert. In OHS&E Management

NACE Corrosion Specialist, Chemical/Mechanical/Consultant , Corrosion Engineer

A dynamic, Mechanical Design/Process Engineer offering over 20 years of outstanding experience in Machine/Tool Design and Project Management. Successful problem solving skills with the talent to transform complex design criteria into simple design solutions.

Looking for growth

Have one year job experience as a Ship design and Ms. degree in Naval Architecture subject .

Electrician Technician

bachelor of engineering (mechanical)

Direct and supervise work of subordinate members of surveying parties.

A highly motivated and dynamic Civil engineer with 10 years of experience in designing commercial and industrial structures. I am looking for a position of Civil Engineer/ Design Engineer in an organization where my experience and knowledge can be used to the best.

Have more than 10 years working i construction firm in Singapore as a M&E trades

Over ten years hands -on experience in XRF spectrometry in cement and steel industry

QUANTITY SURVEYOR

I believe that my key qualities are my excellent interpersonal skills and strong communicative ability, combined with my talent for effective organisation and prioritisation.

MBA in SCM, Excellent Command in MS Office.

5 years working experiance as a QA/QC Engineer

Senior manager maintenance of Drilling water well & Mining drills and Screw compressors, man power Management, Guiding and training the service engineers, maintaining records and monitor the performance

Willing and able to perform ones job with less supervision

3d visualizer, archl draftman, interior designer, renderer, max/viz/photoshop/ vray, architect

I’m experienced metal fabricator/boilermaker with skills in fabrication, assembling, constructing, installing, erecting, demolish, repair, marking out, aligning and maintaining a wide variety of vessels, tanks, towers, boilers, hoists and other structures.

i m very hardworker

Civil Surveyor, GPS survey control, Mining and Tunnel Surveyor,Leica Survey Instrument

I have worked in the area of Geological and Geotechnical Engineering for over six years now. I am a quick learner and can adapt to other earth engineering fields. I would be a valuable asset to any firm that would give me a chance at employment.

31 yrs. old, 13 yrs heavy equipment accident free operation including all dozers, graders, scrapers, etc etc. Currently mainline hoe operator (345bl) thousands of hours roadbuilding, loading trucks and laying pipe. Extensive experience with gps and laser grade systems. Ability to cut grade.

i have 3 years of experience in structure analysis and design for industrial structures, substaton structures, Material handling plant structures. i am having strong hand on STAADPro and Autocad software.

Knowledge in Project management skills like Production control ,Costing ,Project control /Expediting ,Scheduling(Using MS Project), planning ,Preparing Bill of materials ,Procure materials ,Sub contractor control ,Quality activities ,Documents review, ITP preparations, Client meetings ,Design involv

POLYTECHNIC INSTITUTE OF BUCHAREST, FACULTY OF AIRCRAFT ENGINEERING-MECHANICAL ENGINEER-HIGH DEGREE GRADUATE

skills and experience in appointments ranging from QC Inspector, to QC Engineer in the field of Oil and Gas as a ME

B. Tech (Electrical) with more than 15 years experience in project management, design, engineering, installation and commissioning of electrical & control system in combined cycle power plants and substations

I hold a B.Sc. degree in Civil Engineering, 15 years experience in construction project supervision and project management. Overall I'm capable of supervision/management of most types of construction projects.

A highly accomplished gas turbine field engineer and power generation equipment service director. Experienced in turbo-electric machinery installation and maintenance, asset and contract management, profit and loss finance, electro-mechanical troubleshooting, quality control, and staff management.

Enclosed please find my detailed resume for Structural Engineer job openings you may have. As my resume will attest, I appear to have excellent qualifications for this position

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 [ 20 ] 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out