Resume - Safety Manager

Misco Jobs

Resume #77295

CONTACT INFORMATION:
View contact information...

OBJECTIVE: To obtain a position with a well established company that recognizes potential based upon performance and achievement, that can best use my skills in the safety and construction industry.

EXPERIENCE:

4/2007- 11/2008
Barnhart Crane and Rigging
Oakridge, TN
Industry: Construction
Safety Manager
Ran safety program building wind turbines in NW Missouri, Michigan, Texas, southern California, Oklahoma, Oregon and New York. Duties included: New hire orientations, daily safety walks, OSHA and state paperwork, company paperwork, medical management, weekly safety meetings, daily Plan of the Day meetings. ETC.

1/2007- 4/2007
Roadtex Transportation
El Reno, OK
Industry: Transportation
Driver
Hauled produce from California to New Jersey, and back again

4/2006- 12/2006
Lu Greg Trucking
Kingfisher, OK
Industry: Oil Field
Driver
Ran pump truck on location. Usually pulling water of bottom of oil tanks and hauling to disposal. Hauled oil to refineries.

8/2005- 4/2006
Weatherford Fracturing Technologies
El Reno, OK
Industry: Oil Field
Operator
Operated chemical additive unit during downhole fracturing jobs. had to drive to location, Rigg up, pump job, Rigg down. give me a good understanding of the oilfield industry

8/2004- 7/2005
Atlanta CSO Constructors
Atlanta, GA
Industry: Construction
Safety Representative
Helped manage safety program on a 210 million dollar tunnel project in downtown Atlanta. Work consisted of daily job walks/ inspections, OSHA/ company paperwork, Weekly Safety meetings, Medical Management, fall protection inspections, Etc. Just worked 60,000 manhours with no lost time or recordables.

12/2003 - 8/2004
Western Summit Constructors Inc.
Denver, Co
Industry: Construction
Safety Management
Came back after graduation, to serve as safety manager on the water treatment plant until it's completion. Did all paper work, jobsite inspections, etc. I was the only safety on the job.

5/2003 - 8/2003
Western Summit Constructors Inc.
Denver, CO
Safety Intern
I helped run safety program on an industrial water treatment facility in Buford, Ga. Really helped put all the book work to the field and experience I already had.

10/2001 - 5/2002
Oakridge Builders
Tulsa, OK
Field Engineer
Helped Superintendent make sure work was done according to Blueprints and Specifications gon3/2001 - 10/2001
BRYAN ADAIR CONCRETE CONSTRUCTION
Broken Arrow, OK
Carpenter/ Superintendent
* Build, tear down forms
* Layout
* Supervision

2/2001 - 5/2001
CAPSTONE BUILDING CORPORATION
Birmingham, AL
Internship
* Helped build 5 building residential project on campus.
* Layout
* Supervision

11/1998 - 5/1999
LANGSTON'S WESTERN WEAR
Oklahoma City, OK
Salesman
* Sales
* Employee training
Supervision of new employee's

5/1997 - 10/1997
SAYLER HARVESTING
Artas, SD
Operated and maintained heavy machinery
* Operated harvesting equipment
* Traveled from Oklahoma to Manitoba, Canada
EDUCATION: 12/2003 Northeastern State University US-OK-Tahlequah
Bachelor's Degree
Studied in depth the safety profession.
Hazard Analysis, msds, etc.

8/2001 Oklahoma State University- Okmulgee US-Oklahoma-Okmulgee
Associate Degree
Learned the office part of the commercial construction industry, Estimating and bidding, to Interior Finishes and final close out.

QUALIFICATIONS First Aid CPR trainer
Trenching shoring certified
Crosby Rigging Trained
Confined space training
OSHA 500 (train the trainer)
Preparing to sit for ASP/CSP

REFERENCES:
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 751 to 800 of 4805)

Go to Search Parameters...

Brief Description

Extensive background in Program/Project Management.

i am working as an electrical site engineer in ETA at dubai.I am working in dubai metro project.

3 years of professional experience (after Post Graduation) in Highway Engineering (Expressway, National Highway, Hill Roads etc.).

Proe , Autocad, Unigraphics (Modeling,Drafting,Assmbling)

Project Execution : HVAC / PLUMBING / FIRE FIGHTING

I have spent nearly four years as a Geotechnical Engineer and have gained an immense variety of knowledge from running numerous and varied site investigations, which has given me strong skills in writing interpretive ground investigation reports for foundation design and slope stability, supervising

Structural engineer with 4 years experience and Master of Science in Construction management.

I am an architect and urban designer practicing in the Middle East for over thirteen years. I have held design and project management responsibilities at senior positions with international British consultants and Government organizations wherein I handled wide range of building types such as commer

Over ten years of experiences in various sectors of the residential and commercial building industry.

Civel engineer ,with a experience of 8 year in highway construction

Proficient in Microstation,Autocad,Photoshop,and Corel Draw.Knowledgeable in HVAC plans, architectural plans, structural plans.Proficient in English.Time Management, Teamwork, Team Building and Management, Motivation.

Position as Safety Supervisor to achieve ZERO ACCIDENT goal of the company to serve,I have a total of 22 years of work experience 15 years in Indian Navy and 07 years in Oil, Gas, Petrochemicals and Construction field in Gulf and India.

Cost Engineer for 11 years. Has adequate experience in a multitask discipline as planning, project management and supervision, quantity survey. Proficient in SAP and microsoft software applications. Team player, diligent and hard working.

SCADA, DCS, CCMS, BMS, DDC, power, lighting, grounding, ...

Masters degree in Highway/Structural engineering, 14 years of professional experience - working in the department of roads, good skills in CAD application (eg. SAP2000) and other computer applications (eg. spreadsheets)

Presently I am working in Saudi Arabia. I have nearly 17 years experience. From 1996 November I am using Microstation. I can work in Microstation & AutoCAD. I have experience in AutoCAD 2006 from my personal PC. Mainly I am working in architectural discipline. I can do structural & civil work also.

Mechanical Engineer having 14 years of experience in the field of construction in Refinery, Petrochemicals & Power plant mainly focussing on Piping, Reformers & Heaters. Has been worked with major international companies like TEchnip, Technip KTI etc.

Dear Hiring Manager

Btech MBA with 3 yr exp -business analyst

27 year veteran contracts manager , civils and epc specialist

cv for civil foreman

Lead Document Controller, strong interpersonal skills, highly motivated, able to work in multinational companies

Innovative career in the field of electrical power engineering: Installation, Service and Commissioning

B. Sc. in Civil Engineering, 6 years in ERicsson & Nokia, Construction, QA, Documentation, Telecom power management

Fully equipped Mechanical Engineer doing Quantity Surveying

I have more than 6Yrs Exp. with oil and gas field on piping work like Installation,Spool fabrication,Hydro testing,Red line and Asbuilt making,Pumb house,Tie-in area, Receving basin area,etc..work in Abroad and India,

A proactive, versatile and committed Executive Manager with extensive experience spanning throughout the world and accustomed to project and people management, coordinating resources effectively to achieve targets often within stringent deadlines. A skilled problem-solver

HSE Officer with a background of over 19 years in handling safety, Health and Environment in large multi international Oil & Gas, Chemical and Construction Companies (industrial, power plant, petrochemical, marine facilities and heavy fabrication).

Responsible for Receiving, Storing, Issuing, Stock Inventory for all types of Materials for M/s TECHNIP, BECHTEL, GASCO, NPCC (Piping, Instrument, Electrical, Structural steel, Equipments etc. Maintaining uptodate stock Records updating stock

Auto Electrician, Auto Mechanic, Heavy Equipment Mechanic

Document Controller

Over 14 years working experience 3 years experience in design office and 11 years experience in the construction and supervision of major prestigious international projects .

An engineering position in the emphasis of tool design, opto-mechanics, manufacturing, liaison, stress analysis, aircraft interiors or structures.

13+ years geological/geotechnical/GIS international hands-on experience in the construction & energy industries. MSc/BSc/PgD in the geosciences. Excellent software skills. Contractual or permanent post sought. Available now.

I have extensive hands on experience of more than Eight years, including Six years in the Middle East, in the field of Mechanical Engineering for Building Services, working with reputed Engineering and Consulting Services houses in KSA and UAE.

Site Engineering, Autocad & Estimate

Inasmuch as the position would requires strong degree of integrity, plus high level of motivation and assertiveness, I shall be very glad to be a part of your company.

Safety Manager

Quality control inspector

•Experienced Mechanical Engineer with over 8 years experience in HVAC Engineering.

17 years in the field of construction, Experience Architectural Works and Interior works in the construction of the following building such as: Five Star Hotel, Convention Center<Condominuim, High rise Offices, Commercial and residential ,Civil Defense Mass Rapid Transit and chemical Plant.

•Strong knowledge of engineering design principals and methods necessary to adequately dimension and detail complete design concepts. •A thorough knowledge of mechanical, pneumatic, hydraulic components and electrical systems. •Experience with Classification Society Rules and Regulations.

I am seeking a responsible position that is both challenging and an opportunity to share in the rewards of successful performance in an area where creativity and business experience will be of an immediate value to the organization. I have 25 years of electrical experience

Cost Engineer/Estimator with supervisory experience. Responsible for budgeting, estimating, budget coordination and total cost management. Identified systems and procedure that are necessary to ensure that the engineering, procurement, construction and start-up phases are properly planned.

ENGINEERING MANAGER / CIVIL ENGINEER Specialized in Tunneling utilizing EPBMs and SEM / NATM. Holding a Masters Degree in Civil Engineering with 8 years experience in working overseas for leading Construction Contractors, 6 years in tunnelling.

Civil Engineer / MBA with 14 years of international construction project management experience.

Dear Sir / Madam, I’m interested a job opportunity with your organization which would require my skills & qualifications. I have 24 years experience Oil/gas & Power Industry, Construction Management/Supervision & QA/QC, Domestic & Overseas.

I am 37 Y rold, have 17yrsp.,after pass Dip. in Mech.engg., and 9yrs exp., after pass Dip. in Industrial safety from reputed institute in India, in Intl. standard Companies like CCIC-Qatar& Kuwait, L&T ECC-India, UB Engg ltd-India& Kuwait, Enelpower s.p.a.-Qatar.My Exp.

Project Engineer To be a member of a company that designs and builds large offshore and multi-purpose projects. Interests: Hydraulic Structures and Pipelines – Project Execution and Construction Management.

Remote Site Expert : Global Experience.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 [ 16 ] 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out