Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #77366 next resume »»
CONTACT INFORMATION:
If you don"t see contact information, please log in first.

AREAS OF EXPERTISE

M.Sc., Nuclear Engineering
University of New Mexico, Albuquerque, NM,
M.Sc, Offshore Foundations
University of Houston, Houston, TX
Ph.D., Aeronautics/Astronautics, Spacecraft Structures
Stanford University, Palo Alto, CA
Oak Ridge School of Reactor Technology
Oak Ridge National Laboratory, Oak Ridge, Tennessee
M.Sc., Structural Engineering
Purdue University, West Lafayette, IN
B.Sc. Mechanical Engineering
Northwestern University, Evanston, IL

Generalist Consultant for Heavy Industrial Construction in Concrete, Steel and Masonry
Structural Analysis and Design
Structural Modeling and Analysis with RISA-3D
Seismic Analysis and Design
Criticality Analysis of Nuclear Reactors with MCNP
SUMMARY OF EXPERIENCE
Dr. John Cox is a Licensed Structural Engineer with extensive experience in all phases of the design and construction of nuclear facilities and offshore platforms. Outstanding knowledge of code requirements and standards for steel, concrete, and masonry structures for radioactive service. Published author of multiple papers on seismic design and engineering, MCNP, and other engineering applications. Decisive problem solver, effective at interfacing with all levels of contractors, designers, engineers, and management.
For more than ten years Dr. Cox was involved in structural design and construction of nuclear facilities at Los Alamos National Laboratory, including new buildings, special purpose structures, and upgrades of older buildings to meet modern codes. He has managed environmental projects and has extensive experience with those involving RCRA-regulated tank systems for hazardous wastes.
His experience also includes design and construction of offshore platforms; analysis and design of special equipment and facilities for recovery of spent nuclear fuel elements at the Hanford Site; structural design of a transuranic (TRU) waste recovery building at the Idaho National Engineering Laboratory; and design of the diesel generator building for upgrade of process canyons at the Savannah River Site.
Dr. Cox is experienced in the application of the Los Alamos National Laboratory (LANL) computer program MCNP for criticality analysis of nuclear reactors and other critical assemblies.

PROFESSIONAL RECORD
2008-Present The Shaw Group (Stone & Webster), Lead Structural Engineer
2006-2007 Contract Structural Engineer for Department of Energy at Savannah River Site and Yucca Mountain Project, and for GE Nuclear Energy at Vallecitos Nuclear Center
2005-2006 Wardrop Engineering Inc., Saskatchewan, CANADA, Lead Structural Engineer
1995-2005 Merrick & Company, Principal Structural Engineer
1980-1995 TERA, Inc., Vice President and Chief Engineer
1975-1980 McDermott Corporation, Supervising Structural Engineer
1962-1965 Lockheed Missiles & Space Company, SNAP 10A Flight Test Integration Engineer
1961-1962 Stanford University, Affiliates Fellow, Research Associate
1958-1961 Lawrence Livermore National Laboratory, Mechanical Engineer
1948-1952 Purdue University, Instructor and Research Associate, Civil Engineering and
Engineering Mechanics
PROFESSIONAL AFFILIATIONS
American Society of Civil Engineers (ASCE), Life Member
American Nuclear Society (ANS), Member
Licensed Professional Engineer (PE) in New Mexico, Texas, Oklahoma and Colorado
Licensed Structural Engineer (SE) in California, Nevada, Washington and Idaho
Licensed P.Eng Association of Professional Engineers & Geoscientists of Saskatchewan
National Council of Examiners for Engineers and Surveyors (NCEES) Record #4591
KEY PROJECT INVOLVEMENT
National Uranium Enrichment Facility, Eunice, New Mexico
* Site Engineering Office (SEO), The Shaw Group (Stone & Webster), Cherry Hill, New Jersey. Lead structural engineer for discipline team conducting liaison services between the Shaw design office in Cherry Hill and the general contractor/construction management team, WGI/RUST. Work includes developing dispositions for non-conformance reports (NCRs), processing field change requests (FCRs), requests for information to clarify construction documents (RFIs), and participating in engineering change requests (ECRs) and configuration change impact assessments (CCIAs), both required for change control. Conducted seismic analysis of fire water pump house and associated tank and piping system for foundation design, and structural analysis and design of other BOP structures.
General Electric Nuclear Energy, Sunol, California
* Mechanical Design and Analysis Team, Vallecitos Nuclear Center. Conduct structural and seismic analysis of the Economic Simplified Boiling Water Reactor (ESBWR) system and components to support design certification and licensing by the Nuclear Regulatory Commission. Conducted seismic evaluation of existing Susquehanna reactor for replacement of steam dryer.
Yucca Mountain Project, Las Vegas, Nevada
* Repository Project Management Team, Bechtel SAIC Company. Conducted seismic qualification of aboveground heavy concrete shear wall structures and heavy steel frame structures. Conducted probabilistic safety assessment (PSA) of concrete shear walls for in-plane and out-of-plane seismic loads using the CDFM (Conservative Deterministic Failure Margin) procedure developed for the Nuclear Regulatory Commission.

Savannah River Site, Aiken, South Carolina
* Structural Mechanics Group, Bechtel Savannah River Company. Conducted seismic qualification of original concrete production plant structures for new service. Calculated capacities of walls and slabs for seismic loads. Developed calculation procedures based on strip method of analysis for concrete floor and roof slabs and shear walls. Used these procedures to compute demand/capacity ratios (D/C.) Dr. Cox won this assignment based on his extensive experience with structures at other Department of Energy Facilities including Los Alamos National Laboratory, the Hanford Site, the Idaho National Engineering Laboratory and the Savannah River Site.

Post-tensioned Parking Structure, Saskatoon, Saskatchewan
* Inspected and conducted structural evaluation of a three-level aging concrete post-tensioned parking structure and pile foundation for the Royal University Hospital in Saskatoon. Supervised the inspection team and built a finite element computer model of the structure and foundation, including tendon compression and load balancing, using RISA-3D software. Concluded that part of the structure could continue in service until a new facility could be planned and built. Defined loading restrictions necessary. Concluded that another part of the structure should be closed until safe conditions could be restored by upgrades or replacement. Concluded that much of the damage observed was due to differential settlement of separated pile groups and that a new structure should have a continuous grade beam foundation. Made these recommendations to the operating staff of the Hospital. Prepared the proposal and conducted this work while with Wardrop Engineering Inc.

Mines in Saskatchewan, Mexico and British Columbia - New and Upgraded Facilities Projects
* Supervised a staff of structural engineers and draftsmen, advised and participated in the structural engineering work and signed and sealed structural engineering drawings issued for construction by the Mining Division of Wardrop Engineering Inc. in Saskatoon, Saskatchewan.
* Designed structure for a 500 metric ton underground surge bin for feeding raw potash ore from the mining face to the skip-loading pocket. Agrium
* Designed and supervised design and drafting of new and upgraded underground and process mill facilities for other potash and uranium mines in Saskatchewan. Agrium, PCS, Cameco, Mosaic
* Designed structures for copper and cobalt mining and processing feasibility study, Mexico. Bateman El Boleo
* Designed structures for molybdenum mining and processing feasibility study, British Columbia. Adanack Ruby Creek
* Designed new building addition and tank foundation for reverse osmosis plant at Key Lake, Saskatchewan. Cameco Uranium Company
* Designed improvements to brine impoundment reservoir at Belle Plaine, Saskatchewan, for potash solution mining. Mosaic Potash Company

Neutron Tube Target Loading Project, Los Alamos National Laboratory, Los Alamos, NM
* Designed and supervised design and drafting for a complex of buildings comprising an expanded tritium facility for neutron tube target loading. Structures included a new reinforced masonry shear wall building; modification and upgrade of an existing reinforced concrete building; the foundation for a new manufactured steel building; and the site stack and stack foundation. Wrote design criteria, prepared construction specifications and drawings, developed structural test and inspection plans, and integrated structural design with electrical, mechanical, architectural and clean room disciplines.
* Performed support services for the Laboratory during construction of the expanded tritium facility. Reviewed and approved vendor submittals called for in the project specifications; responded to the contractor's request-for-information construction documents; and supported the change control process to prepare as-built project records. Received open recognition by the Laboratory for being responsive and thorough in carrying out these duties.

Project Support at Los Alamos National Laboratory
* Developed a finite element model of a pressurized stainless steel reaction chamber used in the Laboratory plutonium facility. Computed the ultimate failure pressure and identified the failure modes. Results were used as input to operating procedures for the equipment.
* Conducted seismic analysis of a nitric acid tank farm expansion for building PF-4 in TA-55, and designed structure for tanks and piping support and anchorage.
* Completed an evaluation of seismic safety for the two "in vivo" measurement chambers in the Health Research Laboratory. Recommended anchorage upgrades to meet current DOE requirements. Work included seismic analysis of the two chambers and recommendations for seismic upgrades.
* Performed evaluation of Building 6 in TA-53 to seismic requirements of FEMA-178.
* Designed an addition to Building 29 in TA-35 to house beam targets for the DARHT Project. Work included producing drawings and specifications for construction.
* Designed elevated steel structural support for the replacement main air compressor for the CMR Building Upgrades Project and produced construction drawing.
* Conducted conceptual and detailed design of a Weapons Engineering Tritium Facility upgrade for rack storage of tritium canisters in Building 205A at TA-16 including seismic certification, fabrication drawings and specifications.
* Conducted seismic analysis of numerous glove boxes including support framing for nuclear facilities in TA-3, TA-55 and TA-35.
* Performed evaluation of Building 21-1001 to seismic requirements of FEMA-178. Also designed roof support upgrade for this building.
* Designed a reinforced masonry PC-3 storage vault and drilled pier foundation for the Beryllium Technology Facility including seismic analysis. Work included producing drawings and specifications for construction.
* Conducted nuclear criticality analysis of the Annular Core Research Reactor with Fueled Ring External Cavity (ACRR-FREC ll) for the LANL Weapons Response Program testing at Sandia National Laboratory. LANL Monte Carlo computer code MCNP was used for modeling and analysis of the reactor alone and with LANL test assemblies in place.

K-Basin Spent Nuclear Fuel Project, Hanford Site, Richland, WA
* Carried out numerous structural analyses and design assignments for the Cold Vacuum Drying System (CVDS) and the Hot Conditioning System (HCS). Designed seismic anchorage and supports for equipment in the CVDS building.
* Developed finite element models for the 25-ton HCS process enclosure, the process pit covers, and HCS oven and trench-mounted piping assembly. Used these models to compute design loads and seismic anchorage forces.
* Designed trunnion supports for the pit covers; seismic anchorage for the process enclosure; and spent fuel canister support ring and shear bolts for the hot conditioning oven.
* Received written recognition and an award from Merrick & Company for the quality and quantity of work on these projects.

Savannah River Site, Canyons Upgrade Project, Aiken, South Carolina
* Developed structural design criteria document and served as structural engineer of record for design and drafting for a reinforced concrete shear wall building to house a new diesel generator power system. Special issue resolved was showing sufficient friction at the soil/foundation footing interface to prevent the building from sliding during an earthquake.

TRANSURANIC (TRU) Waste Treatment Demonstration Project, Idaho National Engineering Laboratory, Idaho Falls, Idaho
* Performed seismic analysis of equipment support structures and for major elements of the TRU process building at Pit 9 including walls and shredder balcony.
* Designed large retrofit penetrations in the 2'-0 thick reinforced concrete partition wall between arc melter and soil sorter cells of the Treatment Facility.
* Performed seismic dynamic analysis of a finite element model to demonstrate concept feasibility. Prepared detailed design for input to drafting.
* Was structural engineer of record for the construction drawings. Also, for the Treatment Facility, designed the steel frame and concrete deck mezzanine floor for the shredder/separator cell.

Lawrence Livermore National Laboratory, Livermore, California
* Assigned to the Reactor Design Section of the Mechanical Engineering Department. Designed core support structure, planned and evaluated component development and environmental testing for the Troy IIA beryllium oxide ramjet propulsion reactor. Special issues resolved were support of the reactor core for loads due to gravity and ram air pressure drop; thermal stresses in ceramic core elements; and accommodation of differential thermal expansions.
* Developed procurement specifications for the refractory metal alloy base support structure for the follow-on flight configured Tory IIC test reactor.

TERA, Inc., Houston, Texas
* Designed a large open-bottom structural steel gantry building to house remote operations for remediation of Pit #9 at Idaho National Engineering and Environmental Laboratory, Idaho Falls, Idaho. Client was the team of Sonsub Corporation and Lockheed Environmental Corporation.
* Developed and presented a 3-day series of lectures on structural design and seismic analysis of offshore oil and gas platforms to a group of Snamprogetti engineers at a seminar in Castle Gondolfo (Rome), Italy.
* Developed a procedure for seismic analysis of offshore platforms together with Dr. Takaki Kagawa, geotechnical engineer, who provided the seismic soil-structure interaction model. Procedure is published in Proceedings Eighth World Conference on Earthquake Engineering, San Francisco, 1984
* Project manager for design and integrity assessment for over 200 RCRA-regulated hazardous waste tank storage systems in twenty-five states. Was licensed professional engineer in each state. These included both underground and aboveground systems with capacities from 1,000 to 4,000,000 gallons. Participated directly by inspecting many existing systems, and making assessments of structural and mechanical integrity and compliance with appropriate industrial standards. Made recommendations for upgrades to EPA regulatory standards when necessary.
* Project manager for preparation of Part B permit applications for five RCRA-regulated hazardous waste management facilities in Texas.
* Resident structural engineer in Milan, Italy, for seismic analysis of the Mila 6 oil production platform offshore Sicily in the Mediterranean Sea. Procedure described above for seismic analysis of offshore platforms was used.

McDermott Company, Houston, Texas
* Designed and supervised design of structures for over 30 offshore oil and gas drilling and production platforms for the Gulf of Mexico, Philippine Sea and West Africa.
* Served as project engineer on the installation team responsible for design and offshore mobilization of jacket installation aids and the flare boom module for the Union Oil Heather Platform in the North Sea.

Purdue University, W. Lafayette, Indiana
* Full time Instructor in the School of Civil Engineering and Engineering Mechanics. Taught the following courses to returning veterans from World War II studying for an engineering degree under the U.S. "GI" Bill: statics and dynamics; civil engineering materials laboratory (concrete and steel); strength of materials; determinate structures; indeterminate structures.
* Was Research Associate for strain gage instrumentation and locomotive load testing of two steel railway bridges to investigate structural behavior and fatigue failure of floor beam hanger members under service loads. The American Railway Engineering Association (AREA) sponsored the work. Results were used to upgrade the AREA steel bridge design code.
* Designed, drafted, monitored shop fabrication and installed instrumentation for a one-seventh scale model of the actual bridge frame and conducted load testing in the structural engineering laboratory at Purdue. Results verified field measurements and were published by the AREA. This work was used for my Master's degree thesis.

Kentucky Lake Reservoir Tennessee Valley Authority
* Puddled concrete for reinforced concrete piles and bridge piers to raise highways and railroads above reservoir level.
«« previous resume next resume »»
Search Results (Resumes 1 to 50 of 4772)Go to Search Parameters...
Brief Description
Free! 20+ years in Civil/Structural design with a variety of Cadware both 2D and 3D
Free! Twenty five years of mining and construction experience in both surface and underground. Lead Quality Engineer for MTA East Side Access NYC. Chief Inspector for Construction Management on The Heartland Corridor Project in West Virginia. Chief Inspector for the city of Atlanta on the West Area CSO.
Free! Electrical Supervisor/Technician. Construction and Commissioning, Explosion Protection Certification
Free! Experienced hard working Geologist, Underground and open pit experience, Resource development modelling and drill program design and implementation, Very experienced mapping and strong structural background.
Licensed attorney with 25 years international experience in procurement and administration of contracts for engineering and construction of infrastructure, public works and power generation for petrochemical industries, facilities and contracts for engineering design services and consulting studies.
Health and safety project manager with extensive knowledge of construction techniques specializing in developing and implementing health and safety procedures for global construction companies. Expertise includes design of behavioral based safety, cultural assessments, and audit protocols aligned wi
Free! Analysis/Design/Construction Heavy Concrete and Steel Industrial Structures/Foundations
Free! Quality Management Specialist
Surveying Engineer/Survey Project Manager
Cesar has over twenty four years experience as Electrical Engineer and seven years experience as a Control Engineer, having positions such as Regional Sales Manager, Field Engineer, Engineer Project Manager, Electrical Supervisor, System Integrator and Senior Controls Engineer.
Free! Project Management Specialist
Geotechnical Engineer, design, consulting
35 years of experience in the petro-chemical business.
I am a very independent thinker. I enjoy challenges, actually, I thrive on them. I consider myself a very 'hands on' type of problem solver. Thinking 'Outside the Box' has always been my approach to difficult problems.
Long experience Civil Engineer who would like to apply for a challenging position in construction management
Global Project & Engineering Management Executive, Senior Project Manager, Project Director
Quality Assurance Management ▪ Team Building and leadership ▪ Project Life Cycle Management ▪ Corporate Mission/Vision Fulfilment ▪ Safety Management ▪ Layout design & development ▪ Task Scheduling & Workflow management ▪
Project,Resident,Engineer,Coordinator,Administrator
Chemical engineer with MBA and over 20 years of process engineering experience.
Involved in planning, designing & construction of different building. Electrical, water & sanitary lines. Acquired experience in administration & accounts.Implemented & executed several projects successfully.Eperienced in purchases,entering into contracts,quality control, payment to contractors etc
20 Years experienced in Materials Mgt. specially in Procurement mgt.
Electrical and Power System Engineer with over thirty–one years of experience in the field of MV and LV power system related equipment.
To secure a challenging Senior Management position within a progressive reputed organization, which facilitates professional growth and utilization of my architectural qualification and experience, while embracing new methodologies & strategies to remain competitive in the market.
Civil Engineer with 22 + years experience
Architect, architectural CAD drafter/designer historic preservation specialist
Civil engineer with 25 years of diverse expeience with 16 years in L&T ECC.Have also worked with leading companies like ITCand RELIANCE
More then 20 years exp in Manager operation & maintance
Im a civil engineer working for more than 19 years in all fields of civil works. All I can say is I love my job very much and Im sure tha I will be an asset of your company.
I AM BIO MEDICAL ENGINEER WORKING WITH NEWLY CONTRUCTED HOSPITAL IN RIYADH I HAVE 20 YEARS EXPERIENCE
SMALL CONSTRUCTION COMPANY PRESIDENT LOOKING FOR NEW CHALLENGE, GENERAL CONTRACTOR SINCE 1981, ESTIMATING, ACCOUNTING, HANDS ON MANAGEMENT OF PROJECTS AND SUPERVISION OF ARCHITECTS AND ENGINEERS.
I have over 15 years experience in heavy industry and construction and strong skills in managing time and controlling cost on projects from design to start up and operation.
Professional Experience Government Procurement
Over 20 years as an experienced accountant responsible for financial statements and all aspects of the general ledger. I have worked with in house accounting systems and Quickbooks.
Engineer / Consultant for Civil, Water Resources, Irrigation, Dam, Canal, Dam safety, Storm water Drainage, Flood Management, Lake & river revitalization, Procurement, Training Specialist
My techanical abilities in the use of Primavera and my leadership skills may be of significant interest to you. Upon review of my qualifications I think you will find that I would be a very valuable member to your company.
A highly experienced & qualified, possessing extensive experience in handling any size of organization in various aspects of Finance & Administration seeking a managerial position.
20 years experience in design, installation, commissioning, performance testing, client personnel training to final handover of the DCS control system for epc power station projects. Excellent working relation with design, process, control, instrument, operation and vendor system personnel.
High educated Creative leader with 18 years of experience in business and human development and multi languages speaker seeking new challenges, quality experiences and more traces
Bachelor Degree in Electrical Engineering,Masters in Management,Having Good technical knowledge about Engg.standards such as IEC, SEC-standards, IEEE, BIS.
looking for a new experience abroad
Chartered Civil Engineer with 30 plus years' experience in project control, construction, & design of major infrastructures, including reclamation, highways, water, drainage, sewage treatment works, underground and above-ground railways. Specialised in Geotechnical Engineering.
Manager of milling department woodworking division, wood lamination, sawmill manager, lumber quality checker, logs scaler.
Process Industries, Oil & GasOffshore & Onshore Construction, Completion, Fabrication & Installation.
Over 31 years of extensive professional experience in various Highway/Road Construction projects in Bangladesh, Ethiopia, U.A.E., Yemen and Laos. Experienced in Geometric and Structural Design of road pavements. Experienced in Execution, Supervision Consultancy and Design of roads including bridges,
Seasoned Sr Construction Project Executive
Key Skills: Exposure to several clients and consultants in the core sector industry including the Cement industry has helped me to hone my negotiation and relationship building skills.
heavylifts engineer
Project Controls Manager with widely diversified experience worked with some of the top five engineering and construction companies on international and domestic projects.
Electrical Engineer Transmission Distribution Of Power Supply, DEsigns, Layouts., Operation & Maintenence of Grid substations upto 400 KV
7 years shipyard work experienced Senior Project Manager
First   [ 1 ]   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help
» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email
» My Account
» Log In
» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com