Resume - Proactive HSE expert with 13+ years expertise encompassing HSE in Oil and Gas Co...

Misco Jobs

Resume #77422

CONTACT INFORMATION:
View contact information...

Proactive HSE expert with 13+ years expertise encompassing HSE in Oil and Gas Construction; accustomed to project Management and coordinating resources effectively to achieve targets within often stringent constraints. Energetic, dynamic, relishes challenges and demonstrates in-depth analytical and strategic ability to facilitate operational and procedural planning. Strong team builder with experience living and working in remote and unfavourable locations, coupled with both onshore and offshore international experience, necessitating strong leadership qualities.

AREAS OF EXPERTISE
* Industrial Safety
* HSE
* Occupational Health
* Risk assessment and management
* Hazards and Controls (Oil and Gas)
* Permit-to-Work (PTW)
* International / Local HSE Regulations
* Presentations and report writing
* Team leadership and development
* LOTO {Electrical & Mechanical Lockout/Tag out procedure}
* SIMOPS/OPCO and Interface coordination

Professional Experience and Significant Achievements

CTJV (Chiyoda, Technip Joint Ventures) QATARGAS Onshore Expansion Facilities Project.
Senior Permit-to-Work Coordinator/HSE Supervisor; SHES Department Aug 2006- present
As the hydrocarbon industry handles large quantities of flammable, corrosive, explosive and toxic materials, 02 deficiencies, H2S area, Naked flame or arcs, flying particles or sparks, electricity, Radiography, Equipment/moving machineries, Crane operation, Pressure Testing, Confined space etc both during construction/commissioning/start up and operation, so it's agree that potential for serious accidents is obvious. To prevent these accidents not to happen, it's vital that safe system of work should be in placed and that is exactly my area of specialisation on QATAR-GAS EXPANSION PROJECT, to manage the hazards while performing the task safely, coordinated and consistent manner without harm to People, the environment and company asset by reducing, eliminating and manage the risk through PERMIT-TO-WORK system.
Currently accountable for interface and coordination of entire QGX Expansion project' permit to Work system. Spanning construction, pre-commissioning, commissioning and production between the client Qatar-Gas-ESU SIMOPS/OPCO/PMT/CTJV and serves as a focal point interfering between other neighbouring projects like Ras-Gas, QCS-QG3&4 and RLIC respectively, project in the Ras Laffan Industrial City, Qatar.
* Leading the daily administration, supervision and control of the Permit-To-Work system;
* Responsible for developing and implementing Safe Work System and Permit to Work System at the QATAR GAS EXPANSION PROJECT. Implement site wide Safe Work Systems, Auditing Procedure, Process Risk Management and Hazard Assessment, including training and presentation to senior personnel.
* Create SHES procedures and provide training. Mentoring on-site SHE team. Introduction of Corporate Oxy-safety policies, practices and initiatives. Planning safety strategy
* Overseeing all day-to-day construction and pre-commissioning / commissioning and operation surrounding the Permit to Work system, reporting directly to the SHES Manager on any arising issues;
* Ensuring suitable coordination with all personnel in a timely and professional manner;
* Signing and controlling all work permits for designated areas;
* Leading and coordinating construction, PMC, commissioning, OPCO permits to work coordination and interfacing;

Professional Experience and Significant Achievements- Continued

* Operating as the central co-coordinator of Permit Work, provision of formal authorisation relating to Permits-to-Work, including boundaries – ensuring examination for mutual compatibility to avoid conflict within SimOps operation;
* Following-up the revalidation process to ensure permits are revalidated at the end of each shift prior to next shift activity commencement, that is twice a day and without delay;
* Mediate closely with the subcontractor (CCIC)-Performing Authority to ensure all the appropriate hazards and controls measures have been identified for that task to be carried out;
* Monitoring open flame and hot work activities in the operational area in the plant-(Upstream)
* Coordinating daily audits on mechanical / electrical equipments to ensure Lock Out Tag Out (LOTO) procedures are followed and complied with;
* Overseeing the daily, random reviewing of PTW to verify compliance on site and implement the corrective action to the non –complied permit instantly;
* Interfacing and coordinating all Permit-to-Work systems between the client (Qatar Gas), the Principal Contractor CTJV and the subcontractors and facilitating the timely completion of ad-hoc administrative functions;
* Updating and maintaining method statements and job safety analysis;
* Ensure that all documentation related with the Permit is attached, like certificates, Punch list, marked up drawing or Piping and Instrument Drawing {P&ID}, Task Risk Assessment, Method statement or Site Instruction or work procedure, Job safety analysis, checklist, Data sheets {MSDS} as applicable to details and equipment/tools involves in the task.
* Participating in weekly management safety walkthrough on site and Attends daily SIMOPS and OPCO Permit-to-Work meetings.
* Successfully ensured all relevant documents and certificates were attached and completed with permit application according to
Project safety policy;
* Oversaw the display of all planned, procedures, open and suspended work permits on visual display in the permit to work office;
* Administered and monitored the Permit to Work System in accordance with CTJV procedures;
* Identified anomalies in the system – taking the necessary immediate action to rectify promptly;
* Interfaced and coordinated all Permit-to-Work system between the ongoing simultaneous projects and stakeholders;
* Ensured accurate and timely availability of PTW - issuing accordingly;
* Planned, monitored and completed PTW audits for compliance 100% every 6 months - ensuring corrective action was implemented to the non-compliance permit during the audit;
* Reported on PTW adherence - identifying potential improvements where possible;
* Completed risk assessments as required- ensuring work plans and schedules minimised risk and potential conflict within SIMOPS activity;
* Coordinated the maintenance of database, showing the status of all Issued permits, closed out and active permit – submitting to SHES manager on weekly / monthly and annually basis for both construction and pre-mechanical completion (PMC);
* Maintained currents status of road impact notification between SIMOPS/OPCO/ESU and neighbouring projects.

EARLY CAREER BACKGROUND
COMPANY POSITION DURATION No. of YEARS
TSKJ Nig. LTD (A consortium of TECHNIP, SNAMPROGETTI, KELLOGG, JGC) EPC LNG Project – Bonny Island, Permit coordinator –Tie in Dept. June 2003-May 2006 3 Yrs
TECHINT CIMIMI-MONTUBI –ENGINEERING &CONSTRUCTION
Commissioning Department, NLNG Expansion Project Train 3 Safety Officer / Permit Coordinator Sep 2000-May 2003 2yrs, 6 Months
NIGERIA LNG LIMITED
Shutdown/Maintenance Project- Tr-1&2 HSE Officer and Permit Controller, Mar-Jun 2000 3 Months
SIRPI ALUSTEEL CONSTRUCTION NIGERIA LIMITED
SPDC EKULAMA-1 PLATFORM REVAMP Safety Officer- Offshore Feb 1999-Dec 1999 11 Months
OMNI-TECH DRILLING SERVICES/BAROID-SPERRYSUN, SHELL OPL-231
SPDC Drilling services SEREAX-12 Rig, Foreman/Safety officer–Swamp Operation, Jan 1997-Dec 1998 1Yr
SAIPEM DRILLING
NLNG BOOSTER STASTION FACILITIES, ASSOSIATED GAS GATERING PROJECT-SOKU (UNDER SPDC) SHE Technician-Marine/Technical Department- Offshore APR 1995 – Dec 1996 1Yr, 8 months
OSPALKAY INTEGRATED SERVICES NIGERIA LTD
Oil and Gas Tools/ Industrial Personal Protective Equipment Assistant Manager / Administrator, Sep 1994 – Feb 1995 5 Months
OGUN STATE WATER CORPORATION
EDE DAM & WATER WORKS - NIGERIA NYSC Program, June 1993 – July 1994 1Yr

DETAILS OF EARLY CAREER BACKGROUND WITH RESPECT TO AFFOREMENTIONED COMPANIES

TSKJ Nig. Limited (An Consortium of Technip, Snamprogetti, Kellogg, Japan GAS Corporation-JGC)
Project: EPC LNG Project – Bonny Island
Position: Permit-to-Work Coordinator - Tie-In Department, Train 4&5
Responsibility &Key achievements:
This position aided in the development of skills and experience still in use today having been responsible for the daily coordination of Permit-to-Work systems, including: excavation, hot work, confined space entry, pressure testing, grating / flooring removal, radiation, electrical energisation and de-energisation, Heavy critical lift permit, man basket and driving permits, between the principal contractor TSKJ, sub-contractors and the client, NLNG Nigeria Limited- Bonny Island.

Oversaw and reported on information to inductees for PTW induction training;
Planned, coordinated and controlled Permit-to-Work procedures in accordance to HSE management systems;
Prepared and implemented work instructions with TSKJ procedures to ensure safe working practices were fully applied;
Ensured all interfacing work activities were safely controlled through SIMOPS procedures and approved permit systems;
Trained all personnel in the application of the Permit-to-Work system;
Monitored and reported progress as per the requirements of the HSE specifications and procedures;
Participated in meetings and provided reports as per project requirements;
Generated and organised risk assessments for the company's commissioning group when necessary;
Liaised with performing / area operation / Shift Supervisors for daily PTW activities;
Reviewed method statements and facilitated job safety analysis as per the scope of the work;
Successfully managed all safety administrative controls encompassing Permit-to-Work-displaying all planed/open/suspended permits; Checked / verified all attached documents (method statement, JSA, excavation, confined space, rigging plan, isolation, log-out tag-out, radiation, man basket, road closure and drawing of the area), prior to the submission for approval of the permit;
Provided details of current, new and re-validated permits to relevant PTW authorities on daily basis

Nigeria LNG Limited
Project: Shutdown/Maintenance project- Tr-1&2
Position: HSE Officer and Permit Controller
Responsibility: Supported the ongoing development, maintenance, review and coordination of HSE activities, whilst providing leadership and guidance on the continued development and implementation of HSE policy within a Shutdown environment and advising, monitoring and auditing HSE;
Implemented safety strategies together with HSE programs and monitoring sub-contractors to ensure tasks were carried out safely without endangering workers, equipment and the environment;
Compiles HSE statistics, analysis and develops remedial programmes;

TECHINT CIMIMONTUBI-ENGINEERING &CONSTRUCTION
Project: Commissioning Department, NLNG Expansion Project.
Position: Safety Officer & Permit Coordinator
Responsibility: Ensure that Commissioning Safety Procedures and Instructions are complied with; Serve as Commissioning authorised gas tester {AGT}, Reviewed and ensured all required permits documents is attached prior to approval, generating and organizing Risk Assessment and control before permitting any activities;
Monitored and report progress as per project HSE requirement.
Fully responsible for all safety audits, Plant construction safety, troubleshoot safety issues as and when they come up across locations including external contractors;
Train employees on implementation of various types of system in the interest of safety: accident prevention; fire fighting; electrical safety; identifying Hazards & taking preventive steps; induction training; plant safety inspection; fulfilment of various compliance; inspection of equipments; accident analysis; create safety awareness; reduce unsafe conditions in the plants; develop safety training program as per need base for commissioning sub contractor.

SIRPI ALUSTEEL CONSTRUCTION NIGERIA LIMITED
Project: SPDC EKULAMA-1 PLATFORM REVAMP
Position: Safety Officer- Offshore - Material and equipments department
Responsibility: Reviewed offshore job plans, schedules and HSE actions while interfacing with clients and leading daily reporting to the Offshore Safety and Environment Coordinator on all safety related activities onboard the installation.
Implemented permit safety requirements; Ensured that only marked, certified and suitable slings, wires, shackles, blocks and hooks and Materials are used and available for use for operational purposes. Maintain a safe and healthful workplace. Ensure employees observe safety rules. Correct hazards. Use the risk management process. Promote on-the-job training. Launching of Life Boat and life raft, maintenance and repairs, safety drills.

OMNI-TECH DRILLING SERVICES/BAROID-SPERRYSUN, SHELL OPL-231
Project: SPDC Drilling services SEREAX-12 Rig
Position: SHE Technician-Marine/Technical Department- Offshore
Responsibility: Assisted Head of HSE (Drilling) to ensure all Corporate, legal and relevant safety requirements are incorporated into contracts, procedures, programmes and projects.
Solved every HSE matter on site during construction, commissioning, start-up & drilling operations to achieve the targets of 0 LTI, through Safe Work Practices, Proper Waste Disposal & Environmental Damages Prevention by promoting and developing HSE Culture & Awareness through incentive schemes, Proper Risk Assessment, & Implementations of Permit to Work System, Critical Activities on Hazardous Locations, coordinate and implement Personal Protective Equipment campaign program, Safe Storage and handling of chemicals, Standards, Procedures & HSE legislation & Plan; Conducted joint safety walk-through with client delegates and management for safety compliance having also managed safety training, audits and the administration of environmental, safety and health policies and procedures; Carries out investigations of all incidents to determine root causes and learning values. Reviews and monitors Job Safety Analysis and Unsafe Act/Condition Reporting (STOP) programmes for contractors.

SAIPEM DRILLING
Project: NLNG BOOSTER STASTION FACILITIES, ASSOSIATED GAS GATERING PROJECT-SOKU (UNDER SPDC)
Position: Safety Officer- Offshore
Responsibility: Co-ordinate Safety related issues-Safety, Training, Auditing & Review JSA, PTW & Safety Operational compliance Co-ordinate and supervise the on-going operation i.e. Scaffold Inspection, Coordination, Mobilize and Demobilize equipment and personnel. Provide Safety technical support to management and operation;
Provides assistance and support to the Head of HSE (Drilling) in developing an Occupational Health and Safety Management System to achieve OHSAS 1800I certification;
Prepares and implements the Department's Annual Safety Scheme and issues monthly reports. Participates in the Monthly HSE Meetings and the quarterly Drilling Operations Incident Review Committee;
Implements the Annual HSE Inspection Programme, maintains the Tracking System, follows up action items and ensures close out; Issues quarterly reports; Conducts HSE audits and inspections as required; Ensures Contractors comply with contract HSE requirements.

OSPALKAY Integrated Services Nigeria Limited.
Project: Major oil and Gas Tools/ Industrial Personal Protective Equipment Supplier To Companies
Position: Technical Assistant Manager / Administrator
Responsibility: Gained invaluable exposure to cost administration, subcontractor invoicing and knowledge of personal protective equipment standard and specifications.

OGUN STATE WATER CORPORATION- EDE DAM & WATER WORKS - NIGERIA
Project: National Youth Services Corp (NYSC) Program
Responsibility: Routine chemical analysis of water, i.e. on raw, settled and finished water from various works and distribution networks throughout Osun State, Nigeria. Carried out quality and stability test on water treatment, chemical like Aluminium Sulphate (Alum), hydrated lime, high test hypochlorite (HTH) and tropical chloride of lime (TCL)

PROFESSIONAL DEVELOPMENT {MORE DETAILS AVAILABLE UPON REQUEST}
* Permit to Work
* Safety Training Observation Program (S.T.O.P) –A DuPont Safety Course
* Shaping Accident Free Environment (S.A.F.E)
* Behavioural Safety
* Confined Space Entry
* Defensive Driving
* Abrasive Wheel Training
* Fire Prevention / Protection
* First Aid / CPR / Basic Life Support
* Hazard Identification and Loss prevention
* Tropical Basic Offshore Safety Induction and Emergency Training -TBOSIET {OPITO Approved}
* Authorised Gas Tester Training (AGT)
* Managing Staff Health and Safety
* Method Statements &JSA
* Risk Assessment Techniques
* Waste Management
.Injury and Incident free seminar
* Lockout/Tag out Training
* STCW95, HUET/SAS Training, Saipem Drilling
* Marine Personnel Training (Safety Technician & Deck Forman)
* Incident/Accident Investigation and Reporting
* H2S Familiarisation Course and Escape Mask Training

CERTIFICATION AND AWARDS DURING SERVICES
-APPRECIATION CERTIFICATE - QATARGAS SAFETY MANAGEMENT
-SAFETY EXCELENCE CERTIFICATE – QATARGAS PROJECT MANAGEMENT TEAM
-RECOMMENDATION LETTER – CTJV SHES MANAGEMENT
-INCIDENT AND INJURY FREE {IIF} SUPERVISOR SKILL CERTIFICATE –QATAR GAS & JMJ ASSOCIATE
-CERTFICATE OF APPRECEITION, NIGERIA EXPANSION PROJECT- TSKJN-BONNY ISLAND
-TROPICAL BASIC OFFSHORE SAFETY INDUCTION AND EMERGENCY TRAINING {TBOSIET-OPITO APPROVED} VALID TILL SEP 2012
-FIRST AID/CPR/BASIC LIFE SUPPORT CERTIFICATE VALID TILL MAY 2010
-SHES PASSPORT – CTJV SHES' TRAINING MANAGEMENT
-NATIONAL CERTIFICATE ON OCCUPATIONAL HSE– Nigeria Institute of Safety Professional {NISP} IN PROGRESS

ACADEMICL BACKGROUND
* B.Sc. Chemistry (Second Class Honours) Lower Division 1992
* West African School Certificate (WAEC) 1987
* General Certificate of Education (GCSE / A-Level equivalent) 1986

PERSONAL DETAILS
Date of Birth 07, May 1970
Nationality Nigerian
Marital Status Married with four (4) Children
Gender Male

REFERENCES
Will be provided

NOTICE PERIOD & AVAILABILITY
Notice period and availability is between 30 & 45 days with effect from the day terms and condition of contract is duly signed.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1501 to 1550 of 4814)

Go to Search Parameters...

Brief Description

HND Architecture, PGD Architecture, MBA

A pioneering, professionally qualified and hard working Graduate Quantity Surveyor narrowed towards achieving goals in a competitive environment

I have work for the every and each department of Construction and Engineering; Please refer to my CV all details ;

Diploma in Civil engineering, Experienced in Architectural drafting, Detailings in Autocad, Site supervisions, Experience of 7 years in similar field.

IT Manager

I am a civil engineering diploma holder with 8 years exp.in high rise residential and commercial buildings.

Several years of experience in CAD drafting in wood carpentry including 10 months work in Middle East, at present I work as Bulk Handling Design Engineer in a European company, part of my work is to design bulk handling system of cement cargo ship and supply vessels including loaders and unloaders,

NVQ level 2 Scaffolder with 8 years experience and offshore experience. Offshore survival and full medical

Advanced skills for professional design in 3D (Autodesk Inventor 2009)

Computers, home building from foundation up. Media instalations (cable industry work)

Bulldozer Operator, performed pre and post operation of the bulldozer

Master Electrician

11 years of experience in Project Cost Control on Saudi Aramco Projects in Saudi Arabia. Presently working for Saudi Aramco thru secondment.

+16 yrs of experience in EPC/PMC, TPI Quality control & in Construction Companies. Having well experiences for various stages wise Inspections involving Pressure Vessels, Storage Tanks, A/G & U/G Piping & Structural Steel Works. (ONSHORE & OFFSHORE).

sr;mechanical engineer /project engineer/construction engineer/manager/engineer

Program/Project Manager

Qualified Boilermaker/ Welder, with over 25 years experience, mostly on mines and construction.

Sr. Geotechnical Engr, Design and Construction of Underground Structures, Mgmt of Multidisciplinary Projects, Numerical Modeling, Rock Mechanics, Ground Support Design, Tunnel Inspections, Hands-on Experience in Applying FLAC, FLAC3d, UDEC and 3DEC Codes in Design, Work Under NQA-1 Q A Program

Over 15 Years of Management in Operations, Manufacturing, Installations, Utility / Facility Maintenance, Repairs, Distribution, Capital Equipment Purchasing, Equipment Maintenance, Transportation Maintenance, Minor/Major Construction and Fixed Firm Price/ Contracts

Field Construction Engineer

I would like to further my career in maintenance and would enjoy the opportunity and challenges that this opportunity would offer. I believe I have the skills and knowledge that would be an asset to any operations.

OBJECTIVE Senior site agent/ project manager within the commercial construction or civil industry. Remuneration negotiable (from € 50000 p.a. plus benefits), depending on position and region where contract is offered. Would consider any international placement.

Selling Skill, IT-Presales, Management

Facilities Construction Planner and Overseer

Automotive and Locomotive Mechanic - Knowledgable and Reliable

Free! Program Director Construction Large Projects SE Asia Hotel, Embassy, High Rise, Medical, Retail, Data Facilities, Power, Roads, MEP Thailand Vietnam Korea Philippines

-Primavera (Deep knowledge and experience) / SAFRAN planning program / AutoCAD 2-D (Professional use) /

Proactive HSE expert with 13+ years expertise encompassing HSE in Oil and Gas Construction; accustomed to project Management and coordinating resources effectively to achieve targets within often stringent constraints. Energetic, dynamic, relishes challenges and demonstrates indepth analytical Skill

19 yrs. experience in the construction industry as a foreman/heavy equipment operator/mason Extensive training to accurately and safely operate heavy equipment First Aid and CPR Certified

10 years experience with crane, lifting and rigging. certified in all aspects. looking for a professional company with potential for advancement

Field Tech Mechanic

I have over ten years experience in the building and facility maintenance and management. I hired and trained technicians for HVACs; Carpentry, Plumbing, Electrical, Appliance Repairs and Mechanical. I graduated from vocational high in Air-Conditioning and Refrigeration.

Graduate Mechanical Engineer with ASNT level-2 NDT and CNC part programming .

Document controller, 2-year experience with the largest private master developer in the UAE

Plate welder (SMAW,FCAW,GTAW)

Eleven years of hands-on experience and proficiency with Autocad Architectural Desktop, including version 2008

Qualified Civil Engineer (BE Hons) having Experience in Excecution, Planning, Billing, Monitoring. Currently working with GMR (Badrinath) Energy Ltd.as an Executive -Civil (site) on a 300 MW Hydro Power Generation Project

welder

BE IN MECHANICAL ENGINEER. I HAVE 2 YEARS EXPERIENCE IN STRUCTURAL STEEL ERECTION

Project Manager

15 years in Fabrication, Construction, Installation, Hook-Up , Pre-commissioning, commissioning works of offshore Process platform, jackets,decks,bridges, modules, laying of sub-sea pipeline, Graduate Engg, Piping Engg,CSWIP3.2, B'Gas, API510, 653,570,ASNT LevelI, AUT Interpretor, IRCA Lead Auditor,

Experienced sandblaster/painter/foreman/safety tech

Engineer (Insulation, Painting, Fireproofing, Hvac, Scaffolding & Refractory)

Knowledgeable in fossil fuel (coal), power plant bulk materials operations. International experience.

Construction Engineer with core skills in Project Management, Contracts, Facilities and Value Engineering

I have a lot of years of hands on experience in the plumbing industry I can lead large groups of technicians effectively through out all phases of any construction project. I strongly believe that I can easily handle any job regardless of size

Project Planning & Coordination, Cost Control & material Procurement

Resume consist of Personal Data, Employment History & Field of experience.

To Pursue a Challenging Career in Project Management, Engineering, Construction, Oil / Gas and Power Generation related work Offshore or Onshore.

Professionally qualified accountant in South Africa (CPA). Based in South Africa with work experience in Canada, USA and Mozambique. Varied industries include 10 years in engineering, construction and project management.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 [ 31 ] 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out